GovChime
Notice ID: c540cfba053447d7a69e53295035a34eCombined Synopsis/Solicitation

IMPULSE CARTRIDGE CUP

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
12:30 PM CST
Posted
November 16, 2026
Notice type
Combined Synopsis/Solicitation
NAICS
331318: Other Aluminum Rolling, Drawing, and Extruding
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC RI.W6QK ACC-RI
Place of performance
Crane, Indiana
Last updated
Nov 16, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W519TC-27-Q-ICUP
Notice ID
c540cfba053447d7a69e53295035a34e

Description

This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested and a formal solicitation will NOT be issued.

This is a Request for Quotation (RFQ) using FAR RFO Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC27QICUP for the Impulse Cartridge Cup, Coined Point. The technical specifications are found in DWG 201719311 Rev – Blank Point Impulse Cartridge Cup, DWG 201719312 Rev – Coined Point Impulse Cartridge Cup, and DWG 201719314 Rev – Coining Tooling.

The incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. The pertaining FAR RFO and Defense FAR Supplement (DFARS) provisions/ clauses apply to this RFQ and resulting award and are found in Attachment 007 – Provisions and Clauses.

The NAICS code for this procurement is 331318 (Other Aluminum Rolling, Drawing, & Extruding). The small business size standard for this NAICS is 750 employees. The Product Service Code is 1377 (Ammunition & Explosives – Cartridge & Propellant Actuated Devises & Components).

Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation.  The website for SAM is https://www.sam.gov/.

ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL

DESCRIPTION OF REQUIREMENT

CLIN 0001: First Article Testing (FAT) Impulse Cartridge Cup, Coined Point

Quantity: 10 each

CLIN 0002:  Production Qty – Impulse Cartridge Cup, Coined Point

Quantity: 28,215 each

In accordance with Attachment 0001 – Purchase Description MJU-75B Impulse Cartridge Cup dated 28OCT2026, Attachment 0002 - DWG 201719311 Rev – Blank Point Impulse Cartridge Cup, Attachment 0003 – DWG 201719312 Rev – Coined Point Impulse Cartridge Cup, and Attachment 0004 – DWG 201719314 Rev – Coining Tooling.

A Material Certification/ Certificate of Conformance is required for each item for delivery.

BOL/ Shipping information must contain the applicable contract number and applicable PR document number.

TYPE OF ACQUISITION AND CONTRACT

This acquisition is issued as Full and Open. Award will be made using Low Price Technically Acceptable (LPTA) Source Selection procedures resulting in a single award Firm Fixed Price Purchase Order.

DELIVERY AND LOCATION

CLIN      Description                                                                                                                  Suggested Lead Time

0001      Impulse Cartridge Cup, Coined Point; 10 each                                                   6 Weeks After Award       

0002      Production Qty: Impulse Cartridge Cup, Coined Point; 28,215 each            11 Weeks After FAT Acceptance                   

NOTE: A shipment of 14,000 each delivered 11 weeks after FAT acceptance followed by a second shipment of 14,215 each delivered 22 weeks after FAT, until a quantity of 28,215 each has been shipped/ delivered. Early deliveries of the FAT and/ or Production Quantity are acceptable at no additional cost to the Government.

Delivery will be FOB Destination at the following address:

Crane Army Ammunition Activity

Building 148

300 Highway 361

Crane, IN 47522-5001

CRANE ARMY AMMUNITION ACTIVITY DELIVERY INSTRUCTIONS

CAAA receiving hours are 0700-1430, Mon – Thurs BY APPOINTMENT ONLY; Includes Inert & Freight All Kind (FAK). Appointments shall be made via Carrier Appointment System (CAS). Carriers without access to the CAS System, call (812)854-2199 or (812)854-2339, 48 hours prior to delivery for appointment. Failure to follow the protocol stated herein and/or obtain a scheduled delivery time prior to delivery may result in the truck being turned away.

PACKAGING AND MARKING REQUIREMENTS

Preservation, Packaging, and Packing shall be in accordance with ASTM D 3951 (Commercial Packaging). Each shipment shall be marked with an identifiable Lot Number. This Lot Number shall be created in accordance with Attachment 0005. The Lot Number shall also be included on the Material Certification/ Certificate of Conformance.

INSPECTION AND ACCEPTANCE

Inspection and Acceptance will be completed by CAAA. Acceptance will be based on Kind, Count, and Condition.

QUOTE SUBMISSION REQUIREMENTS

Offerors shall submit the following in response to this solicitation:

  1. Price – Offerors must submit Completed Pricing Sheet at Attachment 0006. All yellow-highlighted sections shall be completed. Prices shall be stated to 2 decimal places.

USE OF ARTIFICIAL INTELLIGENCE (AI) TOOLS IN PROPOSAL EVALUATION

Use of Al tools in Support of Evaluations: The Government may employ Al as a tool to assist in
the analysis and review of offeror proposals. Al tools may be used to support tasks such as
summarizing proposal content, identifying compliance with request for task order proposal/
solicitation requirements, and highlighting areas of potential strength, weakness, or risk.


Maintaining Inherently Governmental Functions: Notwithstanding the use of Al tools to support
the evaluation process, all final evaluation judgements, including the assignment or assessment of
adjectival ratings, best value determinations, and source selection decisions, will be made
exclusively by duly appointed Government personnel. The Government retains sole responsibility
for all inherently governmental functions and will not delegate decision making authority to any Al
tool.


Offeror Confidentiality and Data Protection: The Al tools utilized by the Government will be
employed in a manner consistent with applicable regulations that govern the protection of
proprietary and source selection sensitive information. The Al tool will be an output-only system.
Any generated report data is not saved. No proposal data will be transmitted to or processed by
external, non-Government systems without appropriate safeguards and authorizations in place.

BASIS FOR AWARD

Award will be made to the offeror who provides the lowest Total Evaluated Price, who is deemed responsible and who is compliant with all the requirements of this solicitation.

Total Price is calculated as: CLIN 0001 Price plus CLIN 0002 Price = Total Evaluated Price.

In accordance with FAR RFO 52.212-1(d), the Government intends to award a contract against this solicitation without discussions.

LISTING OF ATTACHMENTS

Attachment 0001 – Purchase Description MJU-75B Impulse Cartridge Cup; 28OCT2026

Attachment 0002 - DWG 201719311 Rev – Blank Point Impulse Cartridge Cup

Attachment 0003 – DWG 201719312 Rev – Coined Point Impulse Cartridge Cup

Attachment 0004 – DWG 201719314 Rev – Coining Tooling

Attachment 0005 - Lot Number Instructions

Attachment 0006 – Price Sheet

Attachment 0007 – Provisions & Clauses

DEADLINE FOR SUBMISSION

Offers are due on 25 November 2026 no later than 12:30 PM Central Time.

Offers shall be submitted in the following way:

Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Ryan Buhman, ryan.j.buhman.civ@army.mil. Offerors shall include “W519TC27QICUP Response – [Insert Offeror’s Name]” within the Subject line.

QUESTIONS

Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above.

**Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond.  Questions not received within a reasonable time prior to close of the solicitation may not be considered.

End of Addendum 52.212-1

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (7)

  • B01 - Attachment 0003 - DWG 201719312 Rev - Coined Point Impulse Cartridge Cup.pdf

    83 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Requires SAM.gov sign-in
  • B01 - Attachment 0004 - DWG 201719314 Rev - Coining Tooling.pdf

    115 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Requires SAM.gov sign-in
  • B01 - Attachment 0002 - DWG 201719311 Rev - Blank Point Impulse Cartridge Cup.pdf

    86 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Requires SAM.gov sign-in
  • B01 - Attachment 0007 - Provisions and Clauses.pdf

    357 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • B01 - Attachment 0001 - Purchase Description MJU-75B Impulse Cartridge Cup.pdf

    95 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • B01 - Attachment 0006 - Price Sheet.xlsx

    237 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • B01 - Attachment 0005 - Lot Number Instructions.pdf

    129 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    IMPULSE CARTRIDGE CUP

    Notice c540cfba053447d7a69e53295035a34e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

W519TC-27-Q-ICUP

Archive Date

Dec 10, 2026

Office Address

ROCK ISLAND, IL, 61299-0000