GovChime
Notice ID: cef486a6606a4c76aba633bbad73e07dCombined Synopsis/Solicitation

Cap Screws

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
1:00 PM EST
Posted
November 19, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA MARITIME.DLA MARITIME SHIPYARDS.DLA MARITIME - PORTSMOUTH
Place of performance
Kittery, Maine, 03904
Last updated
Nov 19, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
SPMYM327Q7006
Notice ID
cef486a6606a4c76aba633bbad73e07d

Description

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov.  The RFQ number is SPMYM327Q7006. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 Efective Date 03/13/2026 and DFARS Change Notice 20260702.

It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at this address:

https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and  http://www.acq.osd.mil/dpap/dars/change_notices.html

The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% SBSA.

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104.

Only one quote per vendor will be accepted. Interested parties must fill out the required request for quote paperwork to be considered for award. It is in the attachment section and titled  “RFQ SPMYM327Q7006”. If you are not the manufacturer, proof of traceability is required by the solicitation deadline.

The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

ITEM     DESCRIPTION                                                                   QTY   U/I             

0001       HEX SLF LKG HEAD CAPSCREW                              6          EA

HEX HEAD SLF LKG CAPSCREW, 1/2 -13UNC-3A X 7-1/2" LG, MIL-DTL-1222J TY-I, ALLOY STEEL, GRADE-5, ZINC PLATED IAW ASTM B633 TY-II SC-2; SELF LKG IAW MIL-DTL- 18240F AMEND-1, ANY TYPE. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY)

0002       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                A001        EXHIBIT A, SEQ A001

                See Exhibit “A” Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “A” Seq A002: CDRL DI-MISC-82386 (Certification / Data Report)

0003       SLF LKG HEX SOCKET                                                  4          EA             

SLF LKG HEX SOCKET (CYLINDRICAL) HEAD CAPSCREW, 1-1/2 -6UNC-2A X 3-1/2” LG, FF-S-86H ALLOY STEEL, TYPE-VI, MIL-DTL-18240F(1) TYPE-N. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).

0004      DATA REQUIREMENTS                                                   1          EA              ___NSP____        ___NSP_____

                B001        EXHIBIT B, SEQ B001

                See Exhibit “B” Seq B001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “B” Seq B002: CDRL DI-MISC-82386 (Certification / Data Report)

0005       HEX SLF LKG HEAD CAPSCREW                              3          EA             

HEX HD CAPSCREW, 1/2 - 13UNC-2A X 1” LG, STL, MIL-DTL-1222J, TYPE-I, GR B-7.

0006      DATA REQUIREMENTS                                                   1          EA              ___NSP____        ___NSP_____

                C001        EXHIBIT C, SEQ C001

                See Exhibit “C” Seq C001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “C” Seq C002: CDRL DI-MISC-82386 (Certification / Data Report)

0007       HEX SLF LKG HEAD CAPSCREW                              8          EA             

HEX HEAD CAPSCREW 1/2-13UNC-2A X 2” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL TO BE ALLOY STEEL GRADE-B7,

0008       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                D001        EXHIBIT D, SEQ D001

                See Exhibit “D” Seq D001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “D” Seq D002: CDRL DI-MISC-82386 (Certification / Data Report)

0009       HEX HEAD CAPSCREW                                                 5          EA             

HEX HEAD CAPSCREW 1-8UNC-2A X 4” LONG, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED.

0010       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                E001        EXHIBIT E, SEQ E001

                See Exhibit “E” Seq E001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “E” Seq E002: CDRL DI-MISC-82386 (Certification / Data Report)

0011       HEX HEAD CAPSCREW                                                 4          EA             

HEX HEAD CAPSCREW 1-8UNC-2A X 4-1/4” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED

0012       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                F001        EXHIBIT F, SEQ A001

                See Exhibit “F” Seq F001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “F” Seq F002: CDRL DI-MISC-82386 (Certification / Data Report)

0013       CAPSCREW                                                                         4          EA             

                HEXAGON SOCKET (CYLINDRICAL) HEAD CAP SCREW, 1-8UNRC-3A X 2-1/4 IN LG, NICUAL, FF-S-86J TY-VI, QQ-N-286D, CD, AN, AH.

0014       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                G001        EXHIBIT G, SEQ G001

                See Exhibit “G” Seq G001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “G” Seq G002: CDRL DI-MISC-82386 (Certification / Data Report)

0015       FLAT HEAD SCREW                                                        6          EA             

FLAT HEAD 82 DEGREE SLF LKG MACHINE SCREW, 0.500-13UNC-3A X 2.000 IN. LG. MFR IAW FF-S-92D TYPE III (CROSS RECESS DESIGN I) STYLE 2C (FLAT HEAD 82 DEGREE). MAT’L IS CADMIUM PLATED STEEL. SLF LKG IAW MIL-DTL-18240F AMEND 1 TYPE “L OR P”. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).

0016       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                H001        EXHIBIT H, SEQ H001

                See Exhibit “H” Seq H001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “H” Seq H002: CDRL DI-MISC-82386 (Certification / Data Report)

0017       SAME AS ITEM 0015                                                       30       EA             

               

0018       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                I001        EXHIBIT I, SEQ I001

                See Exhibit “I” Seq I001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “I” Seq I002: CDRL DI-MISC-82386 (Certification / Data Report)

0019       SOCKET HEAD CAP SCREW                                        16       EA             

SOCKET HEAD CAP SCREW, 1/4-20UNC-3A X 5/8 LNG, MIL-DTL-1222J TY-II, NICUAL, GR-500, QQ-N-268G, CD, ANLD, AH.

0020       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                J001        EXHIBIT J, SEQ J001

                See Exhibit “J” Seq J001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “J” Seq J002: CDRL DI-MISC-82386 (Certification / Data Report)

0021       HEX HEAD CAP SCREW                                                32       EA             

HEX HEAD CAP SCREW, 5/16-18UNC-2A X .875 LNG, MIL-DTL-1222J TY-I, NICUAL, GR-500, QQ-N-286G.

0022       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                K001        EXHIBIT K, SEQ K001

                See Exhibit “K” Seq K001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “K” Seq K002: CDRL DI-MISC-82386 (Certification / Data Report)

0023       SOCKET HEAD CAP SCREW                                        3          EA             

                HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 3/4-10UNC-2A X 2 ¼ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY).

0024       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                L001        EXHIBIT L, SEQ L001

                See Exhibit “L” Seq L001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “L” Seq L002: CDRL DI-MISC-82386 (Certification / Data Report)

0025       SOCKET HEAD CAP SCREW                                        2          EA             

                HEXAGON SOCKET CYLINDRICAL HEAD CAP SCREW, 1/2-13UNC-2A X 3 LNG, FF-S-86J TY-VY, NICU, QQ-N-281D AMEND 2. THREADS NEED TO BE EXTENDED TO WITHIN 1/4 IN OF HEAD.

0026       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                M001        EXHIBIT M, SEQ M001

                See Exhibit “M” Seq M001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “M” Seq M002: CDRL DI-MISC-82386 (Certification / Data Report)

0027       SOCKET HEAD CAP SCREW                                        16       EA             

                HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 5/8-11UNRC-3A X 1 ½ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE L OR P . MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY)

0028       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____

                N001        EXHIBIT N, SEQ N001

                See Exhibit “N” Seq N001: CDRL DI-MISC-81356A (Certificate of Compliance).

                See Exhibit “N” Seq N002: CDRL DI-MISC-82386 (Certification / Data Report).

NOTE:  OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.

FAR CLAUSES AND PROVISIONS

Clause/Provision

Title

52.203-19

Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-7

System for Award Management

52.204-10

Reporting Executive Compensation and First-Tier Subcontract Awards  

52.204-13

System for Award Management Maintenance

52.209-11

Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law

52.211-14

Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use.

52.211-15

Defense Priority and Allocation Requirements

52.212-1

Instructions to Offerors—Commercial Products and Commercial Services

52.212-2

Evaluation—Commercial Products and Commercial Services

52.212-4

Contract Terms and Conditions—Commercial Products and Commercial Services

52.219-6

Notice of Total Small Business Set-Aside

52.219-28

Post-Award Small Business Program Representation

52.222-3

Convict Labor

52.222-19

Child Labor—Cooperation with Authorities and Remedies

52.222-36

Equal Opportunity for Workers with Disabilities

52.222-50

Combating Trafficking in Persons

52.222-90

Addressing DEI Discrimination by Federal Contractors

52.226-8

Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33

Payment by Electronic Funds Transfer—System for Award Management

52.232-39

Unenforceability of Unauthorized Obligations

52.232-40

Providing Accelerated Payments to Small Business Subcontractors

52.233-3

Protest after Award

52.233-4

Applicable Law for Breach of Contract Claim

52.240-90

Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text**

52.240-91

Security Prohibitions and Exclusions **See attached clauses and provisions for full text**

52.240-93

Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text**

52.242-15

Stop-Work Order

52.243-1

Changes—Fixed Price

52.246-1

Contractor Inspection Requirements

52.247-34

F.o.b. Destination

52.252-1

Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text**

52.252-2

Clauses Incorporated by Reference **See attached clauses and provisions for full text**

52.252-5

Authorized Deviations in Provisions **See attached clauses and provisions for full text**

52.252-6

Authorized Deviations in Clauses **See attached clauses and provisions for full text**

DFARS CLAUSES AND PROVISIONS

Clause/Provision

Title

252.203-7000

Requirements Relating to Compensation of Former DoD Officials

252.203-7002

Requirement to Inform Employees of Whistleblower Rights

252.203-7005

Representation Relating to Compensation of Former DoD Officials

252.204-7003

Control of Government Personnel Work Product

252.204-7008

Compliance with Safeguarding Covered Defense Information Controls

252.204-7012

Safeguarding Covered Defense Information and Cyber Incident Reporting

252.204-7015

Notice of Authorized Disclosure of Information for Litigation Support

252.204-7016

Covered Defense Telecommunications Equipment or Services--Representation

252.204-7017

Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation

252.204-7018

Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

252.240-7997

NIST SP 800-171 DoD Assessment Requirements.

252.204-7021

Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement

252.204-7022

Expediting Contract Closeout

252.204-7024

Notice on the use of the Supplier Performance Risk System

252.204-7025

Notice of Cybersecurity Maturity Model Certification Level Requirements

252.215-7013

Supplies and Services Provided by Nontraditional Defense Contractors

252.223-7008

Prohibition of Hexavalent Chromium

252.225-7000

Buy American--Balance of Payments Program Certificate—Basic

252.225-7001

Buy American and Balance of Payments Program—Basic

252.225-7002

Qualifying Country Sources as Subcontractors

252.225-7012

Preference for Certain Domestic Commodities

252.225-7048

Export-Controlled Items

252.225-7059

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation

252.225-7060

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

252.232-7003

Electronic Submission of Payment Requests and Receiving Reports

252.232-7006

Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text**

252.232-7010

Levies on Contract Payments

252.243-7001

Pricing of Contract Modifications

252.244-7000

Subcontracts for Commercial Products or Commercial Services

252.247-7023

Transportation of Supplies by Sea--Basic

5452.233-9001

Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text**

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)

C04 Unused Former Government Surplus Property (SEP 2021)

C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020)

C20 Vendor Shipment Module (VSM) (MAY 2026)

E05 Product Verification Testing (MAY 2020)

H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024)

H18 Defense Priorities and Allocations System (DPAS) (JUL 2026)

L06 Agency Protests (DEC 2016)

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024)

L09 Reverse Auction (OCT 2016)

L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016)

L31 Additive Manufacturing (JUN 2018)

L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025)

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

LOCAL CLAUSES (See Attachment for Full Text)

YM3 A1: Additional Information

YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment)

YM3 C500: Mercury Control (Supplies)

YM3 C501: Correction of Certifications

YM3 C506: Qualified Products for Award

YM3 C524: Controlled Industrial Material

YM3 C528: Specification Changes

YM3 C531: Restrictions on K-Monel

YM3 D1: Deteriorative Material Marking

YM3 D2: Marking of Shipments

YM3 D2.2: Marking of Shipments

YM3 D4: Preparation for Delivery

YM3 D8: Prohibited Packing Materials

YM3 E2: Inspection and Acceptance (Destination)

YM3 E4: Disposition of Nonconforming Material

YM3 E504: Notice of Constructive Acceptance Period

YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard

YM3 H500: Special Provisions for Threaded Products

YM3 M8: Single Award for All Items (All or none procurements)

This announcement will close 12/01/2026 01:00 PM EST.  The Point of Contact for this solicitation is Mihaela Zouak who can be reached at Mihaela.c.zouak.civ@us.navy.mil. All responsible sources may submit a quote which shall be considered by the agency. 

System for Award Management (SAM).  Quoters must be registered in the SAM database to be considered for award.  Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer the manufacturer’s name, location, and business size must be provided.

Please submit quotes via email to: Mihaela.c.zouak.civ@us.navy.mil, and PNSYSupplyQuotations@us.navy.mil

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

DLA-KME PNSY EMAIL BOX

Documents

Files (3)

  • RFQ SPMYM327Q7006.pdf

    314 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Exhibits SPMYM327Q7006.pdf

    767 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Clauses - Full Text Provisions and Clauses 11-4-2026.docx

    92 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    Cap Screws

    Notice cef486a6606a4c76aba633bbad73e07d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

SPMYM327Q7006

Archive Date

Dec 16, 2026

Office Address

PORTSMOUTH, NH, 03801-5000