GovChime
Notice ID: a2adf157134a4b039c1afef539bd9129Sources Sought

CGC-HENRY-BLAKE-DRYDOCK-REPAIRS

Responses closed . Full description on SAM.gov.

Overview

Response deadline
1:00 PM EST
Posted
October 27, 2026
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
CG-SEA-C22
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
a2adf157134a4b039c1afef539bd9129

Description

Sources Sought Title: USCGC HENRY BLAKE  DRYDOCK  REPAIRS  

The U.S. Coast Guard is looking for sources which would be interested in performing Drydock Repairs for Coast Guard Cutter HENRY BLAKE (WLM 563)

USCGC HENRY BLAKE (WLM 563) HOMEPORT ADDRESS: 2000 W. Marine View Drive, Everett, WA. 98207

ANTICIPATED PERIOD OF PERFORMANCE: July 7, 2027, to September 15, 2027 (Subject to change)

PLACE OF PERFORMANCE: Contractor Facility    

The scope of this acquisition is for the drydock repairs of various work items for USCGC HENRY BLAKE (WLM 563).  The work will include, but is not limited to: (subject to change)

Fire Prevention Requirements «TYPE»

Hull Plating, U/W Body, Inspect

Hull Plating, U/W Body, Ultrasonic Testing

Hull Plating, Freeboard, Ultrasonic Testing

U/W Body, Preserve, 100 percent

U/W Body, Preserve, Partial, Condition A

U/W Body, Preserve, Partial, Condition B

U/W Body, Preserve, Partial, Condition C

Hull Plating Freeboard, Preserve, Partial

Hull Plating Freeboard, Preserve, 100 Percent

Hull Plating Freeboard (Buoy Port Areas), Preserve

Appendages, U/W, Leak Test

Appendages, U/W, Internal, Preserve  

Voids, Non-Accessible, Internal Surfaces, Preserve 

Tanks, MP Fuel Stowage and Overflow, Clean and Inspect

Tanks, MP Fuel Service, Clean and Inspect 

Tanks, Hydraulic Oil Stowage and Service, Clean and Inspect

Tanks, Potable Water, Clean and Inspect 

Tanks, Potable Water Preserve, 100 Percent 

Tanks, Potable Water, Preserve, Partial

Tanks, Ballast, Clean and Inspect

Tanks, Ballast, Preserve, 100 Percent 

Tanks, Ballast, Preserve, Partial  

Tanks, Dirty Oil and Waste, Clean and Inspect

Sewage Holding Tanks, Clean and Inspect

Tanks (Sewage Holding), Preserve, 100 percent

Tanks (Sewage Holding), Preserve, Partial 

Grey Water Holding Tanks, Clean and Inspect  

Sewage Piping, Clean and Flush   

Grey Water Piping, Clean and Flush 

Z-Drive Input Drive Shaft, Bearings Inspect  

Z-Drive Coolers, Clean and Inspect  

Z-Drive Input Drive Shaft, Thrust Bearing Renewal

Thruster Unit (General), Overhaul 

Thruster Unit Bearings, Renew

Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean

Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean

Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning 

Vent Ducts, Laundry Exhaust, Commercial Cleaning 

Vent Ducts, All Other, Commercial Cleaning

Fathometer Transducer, Renew  

Underwater Speed Log, Transducers, Renew 

Sea Bay, Clean and Inspect

Sea Valves  and Waster Pieces, Overhaul Or Renew 

Sea Bay, Preserve 100% 

Sea Bay, Preserve – Partial

Sea Strainers, Duplex, All Sizes, Overhaul 

Sea Strainers, Simplex, All Sizes, Clean and Inspect

Anchor Windlass, Inspect And Service 

Anchor Chains and Ground Tackle, Inspect and Repair 

Anchor Chain and Ground Tackle, Preserve  

Hull Fittings (Mooring and Towing), Inspect and Test 

Warping Capstan (Aft), Inspect and Service   

Chain Locker, Preserve, 100 Percent   

Exhaust Stacks (Exterior), Preserve – Partial 

Cathodic Protection, Zinc Anodes, Renew, 

Drydock

Temporary Services, Provide - Cutter 

Temporary Messing and Berthing, Provide 

Sea Trial Performance, Support, Provide 

Sewage Service Piping COV, Install 

Bilge and Ballast Valves, Overhaul or Renew

Bilges, Machinery Space, Clean and Inspect

Bilges, Preserve  

Deck Covering, Interior, Wet and Dry, Renew 

Cargo Hatch Hinge, Modify 

Flame Detectors, Replace 

Companies which would be interested in submitting a proposal for this requirement should reply to this Sources Sought Notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-Owned, Women Owned Small Businesses…

Include the following information:

Subject Line: Sources Sought Response for Drydock (DD) Repairs.

1. Company Name, Address, and Unique Entity ID:

2. Point of Contact, Phone number, and Email address:

3. Business Size applicable to the NAICS Code:

• Please state which of the following applies to your company for Business Size:

a. 8(a) Small Business Concern.

b. HUBZone Small Business Concern.

c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC).

d. Veteran Owned Small Business Concern (VOSBC).

e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB).

f. Woman Owned Small Business Concern (WOSBC).

g. Small Business Concern.

h. Large Business Concern

4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor

5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company:

If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA).

If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA.

If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company.  Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs.  Provide documentation that shows the business is small under the NAICS code 336611.

If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, makes long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.

If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million

If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.

Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted.  After the determination a combined synopsis/solicitation will be posted on this website https://sam.gov

Replies should be sent by 12 November 2026,  1:00pm Eastern Standard Time to Mr. Iran Walker, email: Iran.N.Walker@uscg.mil.  

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    CGC-HENRY-BLAKE-DRYDOCK-REPAIRS

    Notice a2adf157134a4b039c1afef539bd9129 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOURCES SOUGHT NOTICE: OVERHAUL OF CATERPILLAR MARINE DIESEL ENGINE ONBOARD USCG CUTTERS. This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exists. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-DCS-SEA-C, Base Alameda, CA to identify sources capable of providing the following: This acquisition is to provide Caterpillar (CAT) full service authorized/certified technical services to repair, perform maintenance on and or overhaul CAT ship’s service and main propulsion diesel engines onboard Coast Guard cutters based upon recommended original equipment manufacturer periodicity. The contractor must provide technical representative and engineering services, lube oil flushes, generator overhauls, and remanufactured main propulsion diesel engines for the Seagoing and Coastal Buoy Tenders (WLB & WLM), Inland and River Tenders (WLI, WLIC, &WLR), Tugs (WTGB & WYTL), 418-foot National Security Cutter (WSML), 360-foot Icebreaker (WAGB), 240-foot Icebreaker (WLBB), 282-foot (WMEC), 270-foot (WMEC), and 210-foot (WMEC) class vessels in accordance with OEM standards. The remanufactured Caterpillar Models are D348, D353, D379, D398, D3304, D3306, D3406, D3408, D3412, D3508, D3512, D3516, D3608, D3612, C18, C32, and C280-12. The remanufactured Caterpillar (CAT) Engines will include Computer Aided Marine Performance Analysis Report (CAMPAR) testing, engine timing synchronization, engine valve rotators, and vibration analysis. The government estimates 36-40 diesel engines will be serviced annually. USCG intends to award at least ten (10) Firm Fixed Price, Indefinite delivery, indefinite quantity (IDIQ) Multi-Award-Task-Order Contracts (MATOC) on a brand name basis to the original equipment manufacturer (OEM), Caterpillar Incorporated authorized dealers for remanufactured diesel engines. The intent of ten awards is to allow for coverage of USCG vessels dispersed throughout the United States, US territories, and outlying areas This acquisition shall be an Indefinite Delivery Indefinite Quantity contracts for One Base year and Four Option Years, if exercised. NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. A set aside determination has not been made. Interested parties should submit a brief description of their capability to meet the requirements and business size. Interested parties must submit a capability statement that sufficiently demonstrates qualifications and previous experience (past performance) relevant to fulfilling the above requirements. Caterpillar is the OEM of the system. Capability statement shall include evidence that the company has access or will have access to Caterpillar proprietary components; i.e., signed agreement with Caterpillar; licensing agreement, certified technicians, etc. A minimum of 6 years of experience is required on the system identified herein. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.**Companies may respond to this Sources Sought Notice via e-mail to: Sandra.A.Martinez@uscg.mil or Catherine.k.Chan@uscg.mil no later than 6 November 2026 at 11:00AM, PST. **Please provide the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern, HubZone Small Business Concern, Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) or a Small Business Concern. 4. Documentation Verifying Small Business Certification. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. Interested parties should register in the System for Award Management (SAM) which replaced the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232- 33. SAM can be obtained by accessing the internet at www.sam.gov. Failure to submit sufficient detailed information may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation.
-Market Research11/06/2026
SOURCES SOUGHT NOTICE: USCGC SANGAMON (WLR-65506) DD FY 27. This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exist. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. Submission of Response to Sources Sought Notice: Responses shall be submitted no later than 29 October 2026 at 2:00PM EST. Forward information regarding your Company via email: delarue.s.shelton@uscg.mil and sandra.a.martinez@uscg.mil REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-SEA-C22-U02, Base Alameda, CA to identify sources capable of providing the following: The U.S. Coast Guard is looking for sources which would be interested in performing Dry Dock repairs for the United States Coast Guard Cutter (USCGC) SANGAMON (WLR-65506). The performance of period start date of this upcoming Dry Dock is 6 April 2027. It is anticipated that the request for Quotes will be issued approximately 07 December 2026, and the contract would be awarded around 23 February 2027. The USCGC SANGAMON (WLR-65506) is a 65-foot -class river buoy tender. which is currently home ported in East Peoria, Ill. The tentative work list will include, but is not limited to the following: Fire Prevention Requirements DRYDOCK; Hull Plating, U/W Body, Inspect - Tender ; Hull Plating, U/W Body, Ultrasonic Testing - Tender ; Hull Plating, Freeboard, Ultrasonic Testing - Tender; U/W Body, Preserve, 100 percent - Tender; Hull Plating Freeboard, Preserve, 100 Percent - Tender; Appendages, U/W, Leak Test - Tender; Propulsion Shaft Rope Guards, Inspect; Appendages, U/W, Internal, Preserve - Tender; Voids, Non-Accessible, Leak Test; Voids, Non-Accessible, Internal Surfaces, Preserve ;Tanks, MP Fuel Service, Clean and Inspect - Tender; Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renew; Propulsion Shafting, Remove, Inspect, and Reinstall Port and Starboard; Propulsion Shaft Bearings (External), Renew ; Stern Tube Interior Surfaces, Preserve, 100 Percent ; Propeller, Perform Minor Repairs and Reconditioning; Propellers, Remove, Inspect, and Reinstall ;Keel Coolers, Clean, Inspect and Hydro ;Fathometer Transducer, General Maintenance ;Sea Strainers, Duplex, All Sizes, Overhaul ;Rudder Assembly, Remove, Inspect And Reinstall ;Rudders, Preserve, 100 Percent ;Rudder Stock Housing, Lower, Renew ;Rudder Stock Housing, Upper, Renew;Spuds, Overhaul - Tender ;Spud Wells, Preserve - Tender; Spud Wells, Inspect - Tender ;Sewage Holding Tanks, Clean and Inspect - Tender;Tanks, MP Fuel Service, Preserve, Partial - Tender,Tanks, Potable Water, Preserve, Partial, - Tender; Cathodic Protection, Magnesium Anodes, Renew - Tender; Drydock - Tender; Temporary Services, Provide – Tender and Barge;Sea Trial Performance, Support, Provide;Hull Plating, U/W Body, Ultrasonic Testing - Barge;Hull Plating, Freeboard, Ultrasonic Testing - Barge; Tanks, MP Fuel Service, Clean and Inspect - Barge; Tanks, Potable Water, Clean and Inspect - Barge;Tanks, Ballast, Clean and Inspect - Barge;Voids, Accessible, Clean and Inspect - Barge;Fathometer Transducer, General Maintenance - Barge;Tanks, Fuel, Preserve, Partial - Barge;Tanks, Potable Water, Preserve, Partial - Barge;Accessible Voids, Preserve, Partial - Barge;Decks - Exterior, Preserve, Non-Skid Broadcast Grit System - Barge; U/W Body, Preserve, 100 percent - Barge;Hull Plating Freeboard, Preserve, 100 Percent - Barge;Cathodic Protection, Magnesium Anodes, Renew - Barge;Sea Trial Performance, Support, Provide - Barge; Sea Strainers, Duplex, All Sizes, Overhaul - Barge; Hull Fittings, Weight Handling Rigging Hardware, Inspect and Test - Barge; Spuds, Overhaul - Barge; Spud Wells, Preserve - Barge;Spud Wells, Inspect - Barge;Buoy And Cargo Crane, Inspect And Service - Barge;Decks – Exterior (Buoy or Construction Deck), Preserve 100%;Drydock - Barge;Bilges, Preserve;Boat Davit Winch, Shrink Wrap;Buoy and Cargo Handling Crane, Shrink Wrap;Deck Covering, Interior, Wet and Dry, Renew;Sink or Toilet, Renew;Hull and Structural Plating, 5/16” Steel Plate, Renew;Hull and Structural Plating, General, Degraded Weld, Steel, Repair; Water Mist Fire Protection System, Retrofit;Compressed Air Supply to Propulsion Shaft Seals, Installation; Kell Coolers, Clean, Inspect and Hydr- Barge and MDE Control Panel, Power Supply Modification This acquisition shall be a Firm Fixed Price Contract. SUBJECT TO AVAILABILITY OF FUNDS. NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. SUBMISSION OF RESPONSE TO SOURCES SOUGHT NOTICE: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Submission of Response to Sources Sought Notice: Responses shall be submitted no later than 29 October 2026 at 2:00PM EST. Forward information regarding your Company via email: delarue.s.shelton@uscg.mil and sandra.a.martinez@uscg.mil Include the following information: Subject Line: Sources Sought Response for Dry Dock (DD) FY27 Repair Availability. 1. Company Name, Address, and Unique Entity ID: 2. Point of Contact, Phone number, and Email address: 3. Business Size applicable to the NAICS Code: • Please state which of the following applies to your company for Business Size: a. 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor 5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company: If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA). If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA. If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs
-Market Research10/29/2026
SOURCES SOUGHT NOTICE: OVERHAUL OF #2 Main Diesel Engine (MDE) Center Section ONBOARD USCG Morro Bay. This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exist. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-DCS-SEA-C, Norfolk, VA to identify sources capable of providing the following: This acquisition is to provide a full service authorized/certified technical services required for a Center Section Overhaul (CSO) for the Opposed Piston (OP) #2 Main Deisel Engine (MDE) manufactured by Fairbanks Morse Defense located onboard the USCGC MORRO BAY. This acquisition shall be a Indefinite Quantity Contract. NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. The government intends to procure this requirement from Fairbanks Morse Defense. All responsible sources are encouraged to identify their interest and capability to respond to this requirement. Fairbanks Morse Defense is the OEM and they consider the system interfaces proprietary. Under the authority of 10 USC 2304 (a)(l) FAR 6.302-1 only one responsible source and no other supplies or services will the satisfy agency’s requirements. In response, please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence/capability statement that sufficiently demonstrates qualification capabilities of experience in work similar in type and scope, documentation to support that the company has access or will have access to Fairbanks Morse Defense proprietary components; ie, signed agreement with Fairbanks Morse Defense; licensing agreement, certified technicians, etc. A minimum of 6 years of experience is required on the system identified herein. THE INTENT OF THIS NOTICE IS TO CONFIRM IF THERE ARE ANY OTHER COMPANIES CAPABLE OF PERFORMING THESE SERVICES. IN THE ABSENCE OF RESPONSES FROM ANY FIRMS THAT BELIEVE THEY HAVE THE CAPABILITY TO PERFORM THIS REQUIREMENT THE COAST GUARD INTENDS TO NEGOTIATE WITH FAIRBANKS MORSE DEFENSE FOR THIS REQUIREMENT. SUBMISSION OF RESPONSE TO SOURCES SOUGHT NOTICE: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Submission of Response to Sources Sought Notice: Responses shall be submitted no later than 6 July 2026 at 1:00PM EST. Forward information regarding your Company via email: delarue.s.shelton@uscg.mil Include the following information: 1. Company Name, Address, and Unique Entity ID: 2. Point of Contact, Phone number, and Email address: 3. Business Size applicable to the NAICS Code: • Please state which of the following applies to your company for Business Size: a. 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor 5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company: If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA). If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA. If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs
-Market Research07/06/2026
This special notice is issued for the U.S. Coast Guard (USCG) requirement for long-term provision of personnel and services to support operations and maintenance of USCGC STORIS. It is anticipated that this requirement will be solicited on an unrestricted basis and posted via sam.gov NLT 11 December 2026. STATEMENT OF WORK: In continuance of its plan to replace the services under contract number 70Z02325C93260002, the USCG is releasing a draft Performance Work Statement (PWS). All of the attached are current versions and subject to change. The PWS is for personnel and services to support the operations and maintenance of USCGC STORIS. The contractor’s services will complement and supplement organic Coast Guard personnel onboard the cutter, on shore in Seattle, Washington, Alameda, California, and Baltimore, Maryland. SOLICITATION INSTRUCTIONS AND EVALUATION METHODOLOGY: To support industry preparation of the upcoming solicitation, the USCG is providing draft solicitation instructions and evaluation factors below that interested firms can expect to be incorporated in Sections L&M respectively in the final solicitation posting. All of the attached are current versions and subject to change. The draft Section L and M provides important solicitation instructions and delineates the government’s approach to evaluating proposals and formulating award. SOLICITATION NO. [INSERT SOLICITATION NUMBER] USCGC STORIS FY 2027–2031 SUSTAINMENT SUPPORT UNITED STATES COAST GUARD | SURFACE FORCE LOGISTICS CENTER SECTION L: INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS 1.0 PROGRAM INTRODUCTION AND ACQUISITION OVERVIEW This solicitation is issued in support of sustainment services for the United States Coast Guard Cutter (USCGC) STORIS (formerly M/V AIVIQ), as described in the Performance Work Statement (PWS). Offerors shall prepare proposals that demonstrate their ability to provide continuous, safe, compliant, and fully qualified support throughout the base period and all option periods. The Government intends to award a single contract to the responsible Offeror whose proposal represents the best value to the Government, price and non-price factors considered, through a Best Value Tradeoff source selection process. Offerors shall comply with all solicitation provisions, including the applicable Federal Acquisition Regulation (FAR), Department of Homeland Security Acquisition Regulation (HSAR), and United States Coast Guard (USCG) requirements incorporated in the solicitation. Offerors shall submit proposals electronically to the Contracting Officer at the address identified in Section A of this solicitation no later than the date and time stated on the solicitation cover page. Proposals shall be clearly labeled: Solicitation No.: [Insert Solicitation Number] Project Title: USCGC STORIS FY27–31 Sustainment Support Offeror Name: [Insert Offeror Name] Offerors are responsible for ensuring their proposal is received by the Government by the stated deadline. Late proposals may be handled in accordance with FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services, or FAR 15.208, as applicable. 2.0 GENERAL PROPOSAL SUBMISSION INSTRUCTIONS 2.1 Proposal Volume Organization and Page Limitations Proposals shall be submitted in the four (4) separate volumes listed below. Unless otherwise stated, page limitations exclude cover pages, tables of contents, glossaries/acronym lists, resumes, letters of commitment, copies of merchant mariner credentials/licenses, required representations and certifications, and pricing worksheets. Volume Title Maximum Length Format I Technical Approach 10 pages Searchable Adobe PDF II Staffing, Key Personnel, and Security 10 pages(Excludes Resumes, Letters of Commitment, & Credential Copies) Searchable Adobe PDF III Past Performance At least three (3) references(No page limit; max 4 pages per reference recommended) Searchable Adobe PDF IV Price No page limit Searchable Adobe PDF & Unlocked MS Excel The Government may disregard information submitted in excess of the stated page limitations. 2.2 Formatting Requirements Page Formatting: Standard 8.5×11 inch page layout with margins of no less than one (1) inch on all sides. Body Font: Minimum 11-point font (e.g., Times New Roman, Arial, or Calibri). Tables, Charts, and Graphics: Minimum 9-point font. Hyperlinks & Cross-Referencing: Offerors shall not incorporate material by reference, except for information expressly requested by the Government. External hyperlinks to websites or external drives are strictly prohibited. 3.0 VOLUME I: FACTOR 1 – TECHNICAL APPROACH (MAXIMUM 10 PAGES) Offerors shall submit a clear, detailed, and technically sound approach for executing all performance requirements outlined in PWS Section 3.0. Statements that the Offeror understands, can, or will comply with the PWS (i.e., merely paraphrasing or restating the PWS) without detailed explanatory narrative are insufficient. The volume shall be structured into four subsections: 3.1 Subfactor 1.1: Vessel Operations and Watchstanding Execution The Offeror shall describe its operational methodology to support USCGC STORIS underway and in-port operations, addressing: Watchstanding & Lookout Protocols: Procedures for providing qualified bridge watchstanders and maintaining continuous, compliant lookouts consistent with Rule 5 of COLREGs and STCW work/rest mandates. Helmsman Performance: Methodology for executing steering and maneuvering orders using standardized IMO Standard Marine Communication Phrases (SMCP) and closed-loop communications. Maneuvering & Specialized Operations: Technical procedures for executing Dynamic Positioning (DP) operations, docking/undocking, mooring, anchoring, Fast Rescue Craft (FRC)/daughter craft launch and recovery, cargo handling, and helicopter flight operations. Voyage Planning & Navigation Logging: Approach to collaborating with Coast Guard navigators beginning at least 14 days prior to deployments, including route planning, fuel estimates, and maintaining continuous radio watches (VHF Ch 16/70 and VTS). 3.2 Subfactor 1.2: Engineering Operations, Preventive Maintenance, and Casualty Response The Offeror shall detail its plan to execute mechanical, electrical, and control operations, addressing: Engineering Watchstanding & Physical Rounds: Processes for conducting daily rounds, inspecting watertight closures, monitoring bilge/slop levels, ground indicators, and electrical switchboards. Machinery Monitoring & Local Control: Approach to monitoring the Machinery Plant Control and Monitoring System (MPCMS) and assuming local control of propulsion and auxiliary equipment during casualties. Preventive & Corrective Maintenance: Detailed execution plan for carrying out maintenance under the cutter’s Preventive Maintenance System (PMS), conducting shipboard corrective maintenance, and preparing the monthly Depot Maintenance Requirements Report. 3.3 Subfactor 1.3: 24/7/365 Reachback Technical Support (Designated Systems) The Offeror shall describe its reachback infrastructure to provide continuous (24 hours/day, 7 days/week, 365 days/year) engineering support for the ten (10) complex systems designated in PWS Section 3.7 (Medium-voltage switchgear, GCUs/PMS, MPCMS, Thrusters, DP System, Towing Winch, Reduction Gears, CPP System, Shaft Seals/Bearings, and Integrated Bridge Systems): Rapid Response Architecture: Detailed plan guaranteeing formal acknowledgment within two (2) hours and delivery of actionable corrective action plans within 48 hours. Escalated Troubleshooting: Process for issuing Condition Found Reports (CFRs) within 48 hours when issues exceed 16 shoreside labor hours or require flyaway support. Electronic Trouble Log: Architecture and workflow for maintaining the continuous digital Trouble Log delivered monthly to the COR. 3.4 Subfactor 1.4: Knowledge Transfer, Training, and Program Deliverables The Offeror shall describe: Coast Guard Training Plan: Methodology for delivering hands-on, one-to-one operational and maintenance training to active-duty military personnel to build organic Coast Guard capability. Program Management & Deliverables Control: Management system for ensuring all PWS Section 8.0 deliverables (including the monthly Report on Provision of Certified Mariners) are accurate, complete, and delivered on schedule. 4.0 VOLUME II: FACTOR 2 – STAFFING, KEY PERSONNEL, AND SECURITY (MAXIMUM 10 PAGES) (Note: Resumes, Letters of Commitment, and Mariner Credential copies do not count against the 10-page limit). The Offeror shall present a comprehensive crewing, organizational, and security management approach to satisfy the requirements of PWS Section 3.1, 3.5, 3.6, 3.9, and 4.0: 4.1 Subfactor 2.1: Certified Mariner Staffing and Crew Rotation Management Ten-Person Mariner Complement: Organizational chart and staffing plan to recruit, mobilize, and maintain the ten (10) required STCW-certified positions throughout the 5-year period of performance: 1 Master (Key Personnel) [Master ≥ 3,000 GT, STCW II/2] 1 Chief Mate [Chief Mate ≥ 3,000 GT, STCW II/2] 1 Second Mate / OICNW [STCW II/1] 2 Able Seafarers – Deck [STCW II/5] 1 Chief Engineer [Chief Engineer ≥ 3,000 kW / 4,000 HP, STCW III/2] 1 First Assistant Engineer [1AE ≥ 3,000 kW / 4,000 HP] 1 Second Assistant Engineer / OICEW [STCW III/1] 2 QMED / Able Seafarers – Engine [STCW III/5] Crew Rotation & Relief Plan: Operational plan managing 4-week crew rotations at Base Seattle or forward ports without disrupting cutter operational schedules. Emergency Absence & Surge Support: Approach for deploying fully qualified relief personnel within 24–48 hours for leave, illness, or emergency absences. Medical & Chemical Testing Compliance: Management processes ensuring all mariners hold valid USCG Medical Certificates (46 CFR 15.401), high-latitude clearances, and random chemical drug/alcohol testing under an appointed Medical Review Officer (MRO) per 46 CFR Parts 4 and 16. 4.2 Subfactor 2.2: Key Personnel and Specific Platform Experience Designated Key Personnel: Resumes and signed Letters of Commitment for: Program Manager (PM): Single contractual POC, ≥ 5 years managing complex vessel staffing and marine industrial support. Master: Licensed Master (≥ 3,000 GT) with deep command experience on large naval auxiliaries, icebreakers, or commercial offshore vessels. Specific Platform Experience (STORIS / M/V AIVIQ Sea-Time): Documented evidence demonstrating that the proposed Master, Chief Mate, Chief Engineer, and First Assistant Engineer each possess at least four (4) months of qualifying sea time aboard USCGC STORIS (formerly M/V AIVIQ) at their proposed rank or one grade lower. Contingency Submission Plan: If an Offeror does not currently retain candidates with this specific sea-time qualification, the Offeror must submit an auditable candidate sourcing plan detailing how it will submit three (3) vetted, qualified candidates per position to the Coast Guard for approval no later than 90 calendar days prior to the first operational deployment. 4.3 Subfactor 2.3: Security, Clearances, and CUI Safeguarding Facility Security Clearance (FCL): Documentation verifying an active prime contractor Secret Facility Clearance issued by DCSA (provide CAGE code). Personnel Security Clearances (PCL): Demonstration that all proposed mariners hold active Secret Personnel Clearances (Tier 3/SF-86) or can be fully cleared prior to contract performance. Identity, Access, and CUI Protection: Strategy for ensuring timely Common Access Card (CAC) issuance under COMDTINST 5500.18, TWIC verification, submission of Security Training and OPSEC plans within 45 days of award, and safeguarding Controlled Unclassified Information (CUI) in accordance with NIST SP 800-171, DHS MD 11042.1, and SF-901 procedures. 5.0 VOLUME III: FACTOR 3 – PAST PERFORMANCE (AT LEAST THREE REFERENCES) Offerors shall provide at least three (3), but no more than five (5) past performance references for contracts performed by the Offeror or major subcontractors within the past five (5) years from the issuance date of this solicitation. 5.1 Content of Past Performance References Each reference shall not exceed four (4) pages and must include: Contracting Agency / Commercial Customer Name and Address. Contract Number, Order Number, and Title. Contract Type (e.g., FFP, T&M, Cost-Reimbursement). Total Contract Value and Period of Performance. Customer Points of Contact (Contracting Officer, COR, or Commercial Marine Superintendent) with current email addresses and phone numbers. Detailed description of the work performed, highlighting relevance to the STORIS scope. 5.2 Relevance Criteria References will be evaluated based on relevance to the PWS requirements, specifically: Certified mariner crewing aboard vessels ≥ 3,000 GT and ≥ 4,000 HP. Underway and in-port sustainment operations in high-latitude, Arctic, or demanding offshore environments. Maintenance and operations of medium-voltage electrical systems, DP systems, and integrated bridge systems. Past Performance Questionnaires (PPQs) may be utilized. The Government reserves the right to obtain data from CPARS, SPRS, and other commercial/government sources. 6.0 VOLUME IV: FACTOR 4 – PRICE (NO PAGE LIMIT) The Offeror shall submit completed pricing worksheets in both searchable PDF format and an unlocked, fully functional Microsoft Excel spreadsheet with all formulas intact. 6.1 Price Structure and CLIN Breakdown Pricing shall reflect the 5-year period of performance (12-month Base Period, four 12-month Option Periods) and encompass: CLIN X001 (Firm-Fixed-Price): Certified Mariner Crewing & Core Vessel Sustainment (Monthly unit price for 10-person mariner crew, PM support, watchstanding, maintenance, and routine reporting). CLIN X002 (Firm-Fixed-Price): 24/7/365 Reachback Technical Support Readiness for Designated Systems (Monthly unit price guaranteeing 2-hour acknowledgment, 48-hour initial corrective actions, and continuous Trouble Log). CLIN X003 (Time-and-Materials / Labor-Hour): Optional Specialized Technical Services (Fixed fully burdened hourly labor rates across Government-specified labor categories, multiplied by estimated hours for evaluation). CLIN X004 (Cost-Reimbursable): Travel & Per Diem (Government-provided plug figure of $150,000 annually; Offerors shall not alter plug values). SECTION M: EVALUATION FACTORS FOR AWARD 1.0 BASIS FOR AWARD (BEST VALUE TRADEOFF) The Government intends to award one contract resulting from this solicitation to the responsible Offeror whose proposal represents the best value to the Government, price and non-price factors considered. The Government will evaluate proposals using a best-value tradeoff process under FAR Part 15. The source selection decision will be based on a comparative assessment of proposals against all stated evaluation factors. The Government reserves the right to award to an Offeror who demonstrates superior technical capability, lower performance risk, and higher confidence at a price premium, where the Contracting Officer determines that the non-price advantages justify the additional cost. Conversely, the Government will not pay an unjustified price premium for technical capabilities that do not provide clear operational value. The Government reserves the right to award without discussions; therefore, Offerors are encouraged to submit their most favorable technical and pricing terms initially. 2.0 RELATIVE IMPORTANCE OF EVALUATION FACTORS The evaluation factors are listed in descending order of importance: Factor 1: Technical Approach Factor 2: Staffing, Key Personnel, and Security Factor 3: Past Performance Factor 4: Price Relative Weighting: When combined, all non-price factors (Factors 1, 2, and 3) are significantly more important than price. As proposals become more equal under the non-price factors, price will become increasingly important in the best-value tradeoff decision. 3.0 EVALUATION FACTORS AND CRITERIA 3.1 Factor 1: Technical Approach The Government will evaluate the adequacy, feasibility, completeness, and soundness of the Offeror's proposed technical approach to determine how effectively the Offeror will perform the requirements of PWS Section 3.0: Vessel Operations & Watchstanding: Evaluated on the thoroughness of procedures for bridge watchstanding, lookout compliance with Rule 5 of COLREGs, IMO SMCP closed-loop helmsman duties, DP operations, small boat/daughter craft launch/recovery, and collaborative voyage planning. Engineering Operations & Maintenance: Evaluated on the robustness of physical engineering rounds, machinery control, execution of the cutter's PMS, corrective maintenance capabilities, and depot-level maintenance planning. 24/7/365 Reachback Technical Support: Evaluated on the Offeror's technical capability to provide around-the-clock support across all ten (10) designated systems, strictly complying with the 2-hour acknowledgment and 48-hour initial corrective action plan mandates. Training & Deliverables Management: Evaluated on the structured methodology for hands-on, one-to-one knowledge transfer to Coast Guard crew members and disciplined deliverable management. 3.2 Factor 2: Staffing, Key Personnel, and Security The Government will evaluate the Offeror’s staffing model, personnel qualifications, retention strategies, and security readiness to ensure seamless support under PWS Sections 3.1, 3.5, 3.6, 3.9, and 4.0: Mariner Manning & Crew Rotation: Evaluated on the Offeror’s plan to continuously furnish ten (10) properly credentialed STCW mariners, execute four-week crew rotations without operational disruption, manage STCW rest compliance, maintain drug/medical fitness, and mobilize replacement personnel within 24–48 hours. Key Personnel Qualifications: Evaluated on the qualifications, leadership credentials, and maritime experience of the proposed Program Manager and Master. Specific Platform Experience (STORIS / M/V AIVIQ Sea-Time): Proposals providing proposed personnel (Master, Chief Mate, Chief Engineer, First Assistant Engineer) with verified, documented sea time of at least four (4) months aboard USCGC STORIS (formerly M/V AIVIQ) will receive favorable consideration for reducing operational familiarization risk. For proposals relying on the 90-day contingency vetting process, the Government will evaluate the credibility, sourcing pipeline, and feasibility of delivering three (3) vetted, high-caliber candidates per position at least 90 days before operational deployment. Security Readiness: Evaluated on the Offeror’s verified active Secret Facility Clearance (FCL), personnel security clearance pipelines, CAC sponsorship timeline, and robust CUI safeguarding plans. 3.3 Factor 3: Past Performance The Government will evaluate recent and relevant past performance to assess its confidence in the Offeror’s ability to successfully perform the required services: Recency: Performance occurring within the past five (5) years from the solicitation issue date. Relevance: The Government will assess the degree of similarity in scope, complexity, vessel tonnage/horsepower (≥ 3,000 GT, ≥ 4,000 HP), ice-capable operations, and reachback engineering. Quality of Performance: Evaluated on customer satisfaction, schedule adherence, operational reliability, cost control, management responsiveness, and safety/regulatory compliance. Confidence Assessment: Offerors without a record of relevant past performance or for whom information is not available will be rated as "Neutral Confidence" in accordance with FAR 15.305(a)(2)(iv). 3.4 Factor 4: Price The Government will evaluate price proposals for reasonableness and completeness in accordance with FAR 15.404. Price will not be assigned an adjectival rating. Total Evaluated Price (TEP): The TEP will be calculated as the sum of: CLIN X001 (FFP Sustainment/Manning) for Base and all Option Periods. CLIN X002 (FFP 24/7/365 Reachback Support) for Base and all Option Periods. CLIN X003 (Optional Technical Services) evaluated using fixed labor rates multiplied by Government-estimated hours. CLIN X004 (Travel) Government-specified plug values. The Government’s evaluation under FAR 52.217-8 (Option to Extend Services) based on six months of the final option period rate. Price Reasonableness & Balance: Evaluated to ensure proposed prices are fair, reasonable, and not materially unbalanced between base and option periods or between labor categories. 4.0 EVALUATION RATING METHODOLOGY 4.1 Technical Approach and Staffing/Security Adjectival Ratings (Factors 1 & 2) The Government will assign an adjectival rating to Factors 1 and 2 reflecting technical quality and performance risk: Adjectival Rating Definition Outstanding Proposal indicates an exceptional approach and understanding of the requirements; contains multiple significant strengths, and risk of unsuccessful performance is very low. Good Proposal indicates a thorough approach and understanding of the requirements; contains strengths which outweigh any weaknesses; risk of unsuccessful performance is low. Acceptable Proposal meets requirements and indicates an adequate approach and understanding of the requirements; strengths and weaknesses are balanced; risk of unsuccessful performance is moderate. Marginal Proposal has not demonstrated an adequate approach and understanding of the requirements; contains one or more weaknesses which are not offset by strengths; risk of unsuccessful performance is high. Unacceptable Proposal fails to meet an acceptable standard of performance; contains one or more deficiencies; proposal is unawardable. 4.2 Past Performance Relevance and Confidence Ratings (Factor 3) Past Performance Relevancy Levels: Very Relevant: Performance effort involved essentially the same scope, magnitude of effort, and complexities (e.g., civilian-crewed polar/ice-capable vessels >3,000 GT with 24/7 engineering reachback). Relevant: Performance effort involved similar scope, magnitude, and complexities (e.g., commercial or military auxiliary vessel crewing >3,000 GT or propulsion sustainment). Somewhat Relevant: Performance effort involved some of the scope, magnitude, and complexities (e.g., commercial marine staffing on smaller tonnage). Not Relevant: Performance effort involved little or none of the scope and complexity. Performance Confidence Assessment Ratings: Substantial Confidence: The Government has a high expectation that the Offeror will successfully perform the required effort based on the Offeror's recent/relevant performance record. Satisfactory Confidence: The Government has a reasonable expectation that the Offeror will successfully perform based on the Offeror's record. Neutral Confidence: No recent/relevant performance record is available. A neutral rating neither rewards nor penalizes the Offeror. Limited Confidence: The Government has a low expectation that the Offeror will successfully perform based on past performance deficiencies. No Confidence: The Government has no expectation that the Offeror will successfully perform based on past performance deficiencies.
-Special Notice11/20/2026
REQUEST FOR QUOTE 70ZU0227Q49002B00 QUOTE DUE NLT: 11/17/26, 12 PM EST ITEM REQUIRED DELIVERY DATE: 12/14/2026 NAICS 336611 The U.S. Coast Guard intends to award a sole source contract to CAMPBELL SCIENTIFIC INC. for: NSN: 6660 01-470-7062 WXPAK, ASSY W/HARDWIRE SENSOR PART_NBR: S1568 QUANTITY: 19 EA MFG NAME: CAMPBELL SCIENTIFIC INC. This procurement is being conducted under the authority of FAR 13.106-1(b), which permits sole source awards when only one responsible source and no other supplies or services will satisfy agency requirements. CAMPBELL SCIENTIFIC INC. is the original equipment manufacturer (OEM) and possesses proprietary knowledge, technical expertise, and specialized capabilities that are essential to meet the requirements of this procurement. No other vendor has been identified that can provide the required goods/services with the same level of compatibility, quality, and performance. Key Details: Vendor Name: CAMPBELL SCIENTIFIC INC NAICS Code: 336611 This Notice of Intent is not a request for competitive proposals. However, any interested party that believes it can fulfill the requirements may submit a capability statement to the point of contact listed below. Information received will be considered solely for the purpose of determining whether to conduct competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided. Telephone requests will not be honored. All questions regarding this notice shall be submitted in writing to Gina Baran no later than 11/17/2026. Quote shall be emailed to gina.m.baran@uscg.mil.
-Special Notice11/17/2026

Additional Details

Solicitation Number

CGC-HENRY-BLAKE-DRYDOCK-REPAIRS

Archive Date

Nov 27, 2026

Office Address

Alameda, CA, 94501