GovChime
Notice ID: da164cb8dcd34a448ecb6f02375ed298Combined Synopsis/Solicitation

3D Printer with accessories and supplies

Responses closed . Full description on SAM.gov.

Overview

Response deadline
6:00 PM CDT
Posted
April 14, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
334418: Printed Circuit Assembly (Electronic Assembly) Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
Fort Polk, LA , 71459
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U2558
Notice ID
da164cb8dcd34a448ecb6f02375ed298

Description

Modix BIG-120X V4 3D Printer which includes accessories, supplies, onsite assembly and onsite training. See attached Combined Synopsis/Solicitation W911S226U2558 amendment.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/Solicitation

    3D Printer with accessories and supplies

    Notice 445cdade5fe645759b42ff8006f7ffed on SAM.gov

  2. 2
    Version 2Combined Synopsis/Solicitation

    3D Printer with accessories and supplies

    Notice 256516b62399476eb79fca82d9b0e0f5 on SAM.gov

  3. 3
    Version 3Combined Synopsis/SolicitationCurrent

    3D Printer with accessories and supplies

    Notice da164cb8dcd34a448ecb6f02375ed298 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Controller and GPS for Uncrewed Aircraft Systems. A specifications document or datasheet is required with all quotes.
-Combined Synopsis09/17/2026
Fiber Optic Connectors
-Combined Synopsis08/17/2026
Street Smarts VR - Training Solution PRO Training Solution Ultimate Add-on - for existing Street Smarts Virtual Reality Training System currently in use at Fort Riley Kansas.
-Combined Synopsis07/23/2026
USB-C to 12-PIN ODU cables 0001: Reason for amendment is to change the quantity from 490 to 620.0002: Reason for amendment is to remove the salient characteristic of Dual captive thumbscrews for secure attachment to case due to change in requirement.
-Combined Synopsis06/16/2026
Reason for amendment 0001 was to update include additional items that was left off the solicitation. 8300-W1K-S Single Mode SC Hot Melt Connector with white 3mm boot Part# 8300. for 125 m fiber, 250/900 m jacketed cable features a zirconia ceramic ferrule with 0.2 dB typical loss for single mode fiber. It is specifically designed for ease of termination in local area networks. Pre-loaded with advanced re-heat able adhesive, this connector allows fiber repositioning and shows blue dot of adhesive after fiber insertion. It has no internal splice. No need for epoxy mixing. The termination time is about 2 minutes. The 8300-W1K-S hot melt connector meets TIA/EIA 568-C.3 standard for indoor and outdoor applications. WHITE boot. Sold 1 per package.002: 8100YS ST Single Mode Hot Melt Fiber Connector with Yellow 3MM Boot Part# 8100YS. For 125 m fiber features a zirconia ceramicferrulewith0.2 typical loss for single mode fiber. Specifically designed for quick, accurate and permanent field terminations in LAN intrabuilding environments. Color-coded yellow boot. Sold 1 per package.003: SC Hot Melt Connector Multimode 125 m 6300W These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiberin2minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0004: ST Hot Melt Connector Multimode 125 m 6100 These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiber in 2 minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0005: Electro-Wash MX Cleaner Degreaser is a high flash point cleaner that quickly removes soils, adhesives, and residues from insulation jackets and conductors on telecom, fiber optic and coaxial cables. Engineered with very low surface tension, this formulation penetrates and removes soils quickly with excellent wetting action, lifting and removing soils from the dirtiest areas. Electro-Wash MX Cleaner Degreaser is also ideal for removing carbonization, oxidized oils and greases from metal surface. Fiber Optic Strippers Precision Three Hole are large strip notch at the tip of the tool is used to remove1.6mm to 3.0mm jacketing. The middle strip notch is used to remove 600um to900um buffer. The smallest strip notch is used to strip the 250um coating to expose the 125umfiber cladding. The tool also has an easy-grip ergonomic handle and a closing latch to protect the stripping surface when not in use. FIS Cleaning solution 99% alcohol is 99% ACS reagent grade isopropyl is used in cleaning fiber connector end faces or prior to splicing. Miller Kevlar Cutter Scissor When cutting Kevlar, you need a cutting tool with very durable blades. You also want the tool to cut cleanly, and to fit comfortably in your hand. FIS offers Kevlar cutters that fit the bill. The Kevlar cutter, F1-KS1 (serrated), features vanadium steel serrated blades and high leverage cutting, utilizing long molded handles. Carbon Molybdenum and Vanadium Steel Blade. Ergonomic molded handles provide comfort in either hand.
-Combined Synopsis04/02/2026

Additional Details

Solicitation Number

W911S226U2558

Archive Date

Apr 14, 2027

Office Address

FORT DRUM, NY, 13602-5220