Notice ID: dc60be3e3e6f483397d2b5fb65af1945Sources Sought
High-Temperature In-Situ (HTIS) Indenter
Archived on December 12, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM UTC−05:00
- Posted
- November 13, 2024
- Notice type
- Sources Sought
- NAICS
- 334513: Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- Gaithersburg, MD, 20899
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- NIST-SS25-CHIPS-0025
- Notice ID
- dc60be3e3e6f483397d2b5fb65af1945
Description
The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Governments anticipated needs. BACKGROUND The National Institute of Standards and Technology (NIST), Material Measurement Laboratory (MML), Materials Measurement Science Division (MMSD), Nanomechanical Properties Group (https://www.nist.gov/mml/mmsd/nanomechanical-properties-group) determines and disseminates key data to establish the relationship between structure, property, and performance of materials and devices to address current and future needs in semiconductor microelectronics, energy conversion applications, climate research, and additive manufacturing. For this project, NIST is aiming to study the deformation behavior and measure mechanical properties (e.g., modulus, creep, yield stress, fracture toughness) of materials (such as, dielectrics and metals) and structures relevant to the semiconductor industry (such as, film stacks and dies). The described mechanical characterization using instrumented indentation will be performed under vacuum conditions at temperatures ranging from room temperature (RT) to 350 C. Furthermore, in-situ observation of the indentation-induced deformation and damages (e.g., cracking, delamination) will be conducted during indentation experiments. These high-temperature mechanical tests under vacuum conditions can be accomplished by operating an instrumented indentation device specifically designed for high-temperature (HT) testing inside a scanning electron microscope (SEM). The HT in-situ (HTSI) indenter will be predominately installed and operated in a FEI Quanta 200 FEG ESEM. However, the HTSI indenter may also be occasionally installed and operated in a JEOL 7800 or JEOL 7100. NIST is seeking information from sources that may be capable of providing a solution that shall achieve the objectives described above, in addition to the following essential requirements: Capable to operate in vacuum conditions as generated inside an SEM. Capable to conduct quasi-static and dynamic (continuous stiffness measurement) indentation testing at forces up to 200 mN at temperatures ranging from RT up to 400 C. Capable of high-speed indentation mapping at temperatures ranging from RT up to 400 C (company is asked to specify maximum number of indents per map and mapping speed in indents per minute). Capable of active, independent heating of sample and indenter probe. Capable of monitoring the temperature of sample and indenter probe. Capable to enable in-situ imaging using secondary electron (SE) and backscattered electron (BSE) detectors of SEM during mechanical testing. Capable to conduct scratch testing at normal forces up to 200 mN (company is asked to specify temperature range for this test mode). Capable of performing scanning probe microscopy (SPM) with indenter probe over a scan range of at least 10 m by 10 m (company is asked to specify temperature range for this test mode). Capable to be mounted and operated inside the specified SEM models manufactured by FEI and optional JEOL. Provide all hardware and software components necessary to operate the HTSI indenter inside of SEM. HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and active in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your companys Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Governments requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your companys status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Governments requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access companys published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the governments requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organizations capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSAs eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). The responses shall not exceed 10 pages including all attachments, charts, etc. Thank you for taking the time to submit a response to this request!
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
NIST-SS25-CHIPS-0025- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentNov 13, 2024
High-Temperature In-Situ (HTIS) Indenter
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Value Proposition: ThermaSpin, developed by scientists at Los Alamos National Laboratory, provides a reliable, cost-effective way to measure the flow behavior (viscosity) of extremely hot and reactive liquids, such as molten salts and metals, under realistic operating conditions. Unlike existing solutions that are expensive, complex or poorly suited for low-viscosity fluids, this enclosed high-temperature viscometer delivers high sensitivity, small sample requirements and precise atmospheric control, enabling accurate measurements without exposing materials to air or contamination. This capability is critical for industries such as advanced nuclear energy, thermal energy storage and high-temperature materials processing, where fluid properties directly impact system performance, safety and design. By making these measurements more accessible and practical, the ThermaSpin High-Temperature Viscometer reduces development risk, lowers testing costs and accelerates innovation in next-generation energy and industrial systems. The Challenge: Accurately measuring the viscosity of molten salts and other high-temperature liquids is extremely difficult because these materials exist under harsh conditions—temperatures approaching 1,000°C, high chemical reactivity and sensitivity to air and moisture. Traditional measurement techniques often lack the sensitivity needed for these low-viscosity fluids or require specialized, resource-intensive methods that are not widely accessible. In addition, many approaches demand large sample volumes, which can be impractical or hazardous when working with corrosive or toxic materials. Maintaining a controlled environment during testing further complicates measurements, as even minor contamination can alter results. Together, these challenges create a significant barrier to obtaining reliable data on fluid behavior in systems where precise performance understanding is essential. Problems Solved: ThermaSpin High-Temperature Viscometer addresses these challenges by providing a sealed, high-temperature measurement system that can operate reliably in extreme environments while maintaining strict control over sample purity. Its rotational design, coupled with a highly sensitive torsion-based measurement approach, enables accurate detection of the very low forces associated with low-viscosity molten fluids—something conventional instruments struggle to achieve. The enclosed architecture allows operation under inert or controlled atmospheres, preventing contamination from air or moisture, while also supporting smaller sample sizes to reduce risk and material constraints. By integrating temperature resilience, corrosion compatibility and precise mechanical measurement into a single platform, ThermaSpin overcomes the key technical and practical limitations that have historically restricted viscosity characterization in these demanding conditions. Key Advantages: Extreme temperature capability (~1000°C): Reliable operation for molten salts, metals and other high-temperature fluids High sensitivity for low-viscosity liquids: Accurately captures subtle flow behavior that conventional viscometers miss Sealed, controlled environment: Maintains sample purity by preventing exposure to air and moisture Handles corrosive and hazardous materials: Durable design compatible with chemically aggressive substances and smaller sample sizes No specialized infrastructure required: Eliminates dependence on costly, limited-access techniques like neutron imaging Versatile and integration-ready: Adaptable to multiple applications and compatible with inert atmosphere systems (e.g., glove boxes) Market Applications: Advanced Nuclear Energy: Molten salt reactors (MSRs), fusion systems and fuel cycle development Thermal Energy Storage & CSP: High-temperature heat transfer and storage fluids for renewable energy systems Metallurgy & Metal Processing: Molten metal monitoring in refining, casting and advanced manufacturing Chemical Processing: High-temperature and corrosive fluid handling in industrial chemical production Research & Development: National labs, academia and industry studying thermophysical properties of extreme-condition materials Defense & Government Applications: Controlled characterization of hazardous or sensitive molten materials in secure environments Development Status: TRL 3 US Patent pending LA-UR-26-26227 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 69% | Special Notice | 04/01/2027 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for Lab equipment - High Temperature/High Pressure Cell. NASA/NSSC intends to issue a sole source contract to SPECAC INC 333 N Bedford RD STE 129 Mount Kisco, New York 10549-1158, United States under the authority of FAR 12.102(a). It has been determined that SPECAC INC is the sole provider of Lab equipment - High Temperature/High Pressure Cell NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 334519 Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 11/4/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . | 68% | Special Notice | 11/09/2026 |
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. | 68% | Market Research | 11/28/2026 |
68% | Market Research | 12/05/2026 | |
please see attached. | 68% | Market Research | 12/03/2026 |
Additional Details
Solicitation Number
NIST-SS25-CHIPS-0025
Archive Date
Dec 12, 2024
Office Address
GAITHERSBURG, MD, 20899