Civilian Armored Vehicle Manufacturers
Archived on November 7, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM EDT
- Posted
- October 6, 2026
- Notice type
- Sources Sought
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 336110: Automobile and Light Duty Motor Vehicle Manufacturing
- Agency
- Department of State
Notice details
- Office
- ACQUISITIONS - AQM MOMENTUM
- Place of performance
- 72660, Virginia
- Last updated
- Nov 7, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- DEAV2027-001
- Notice ID
- e045c29ea91e4f828938620c93b7993c
Description
PURPOSE
This Sources Sought Notice seeks to identify potential vendors that specialize in civilian armored vehicles. The Government will only accept responses from firms that perform the actual armoring work from start to finish. Responses from brokers or intermediaries will not be accepted.
MANUFACTURING LOCATION REQUIREMENT
All vehicle armoring work under any resultant contract shall be performed at facilities located in the United States. The resultant contract will not allow the Contractor to perform or subcontract any armoring work to facilities located in countries subject to U.S. sanctions or export control restrictions.
ANTICIPATED CONTRACT DETAILS
Contract Type: Indefinite Delivery Indefinite Quantity (IDIQ) Period of Performance: One (1) year base period plus nine (9) twelve-month option periods
INFORMATION REQUESTED
Interested parties should provide the following information in their response:
1. Company Information a. Company name b. Company address c. Point of contact (POC) name, phone number, and email address d. DUNS number (or UEI if transitioned)
2. Small Business Status a. Indicate whether your company is a small business under NAICS code 336211 b. If applicable, list the socioeconomic category in which your company belongs (e.g., 8(a), HUBZone, SDVOSB, WOSB)
3. SAM Registration a. Confirm that your company is registered in the System for Award Management (SAM) i. Provide SAM UEI number
4. Capability Statement (20-page maximum), focusing on your firm's ability to armor various types of passenger vehicles:
a. Armoring Experience — Provide details of vehicle armoring experience in the private and/or public sectors for the previous 10 years, including:
i. Types of vehicles armored; make, model, and model year going back no further than 10 years.
ii. Example use cases of past vehicles armored (e.g., cargo transport, VIP protection).
iii. Ballistic and blast protection levels achieved for standards such as NIJ, VPAM, STANAG, etc., and any non-standard protection requirements met.
iv. Fabrication capability for opaque armor materials, and types and thicknesses of materials used in previous armored vehicles.
v. Client references (if releasable).
b. Contract Volume and Track Record
i. Total dollar value of vehicle armoring contracts/orders performed annually over the past 3 years.
ii. Largest single order (by vehicle quantity and dollar value) completed within a 12-month period.
c. Manufacturing Capabilities
i. Location(s) of manufacturing facility/facilities.
ii. Any subcontractors used in vehicle production.
iii. Production capacity in vehicles per year.
iv. Current production lead time, from contract/order award to delivery, for a single vehicle and for a batch order (e.g., 10, 25, 50 vehicles).
v. Surge capacity: ability to increase production temporarily to meet urgent Government requirements, and associated timelines.
vi. Quality certifications (e.g., ISO, industry-specific certifications).
5. Facility Security Clearances a. Details regarding current and/or past facility security clearances (e.g., FCL level and expiration date)
6. GSA Schedule (if applicable) a. GSA Schedule number b. Period of performance
7. Acquisition Strategy and Contract Structure Feedback
a. Does your firm have experience performing under an IDIQ contract with multiple 12-month option periods? If so, please describe.
b. Would your firm be able to compete effectively if this requirement is set aside for small business, 8(a), HUBZone, SDVOSB, or WOSB concerns? Please explain any concerns with a small business set-aside.
c. Based on your knowledge of the industry, are you aware of at least two other capable, responsible small businesses that could perform this requirement? (This helps the Government assess set-aside feasibility under the Rule of Two.)
d. Would your firm prefer or recommend a single-award IDIQ or a multiple-award IDIQ for this requirement? Please explain the rationale.
e. Do you have experience with, or a preference for, Firm-Fixed-Price (FFP) task/delivery orders versus other pricing arrangements (e.g., FFP with economic price adjustment) for this type of work, given potential material cost volatility (e.g., steel, ballistic glass, composites)?
f. What is a reasonable Rough Order of Magnitude (ROM) cost range per vehicle for common armoring configurations (e.g., B4/B6 level sedan, B7 level SUV), if you are able to share this for planning purposes?
g. Are there minimum order quantities or dollar thresholds your firm would require to make individual task orders economically viable?
h. What is your firm's standard warranty period and terms for armoring work performed, including coverage for parts, labor, and any workmanship defects?
i. Is your firm capable of providing warranty support at U.S. Department of State posts located overseas? If so, please describe how this support would be delivered, including:
- Delivery method – e.g., dispatch of traveling technicians from the U.S. or a regional hub, use of vetted local subcontractors/service partners, or a combination of both;
- Coordination with post – how your firm would coordinate with the post's General Services Office (GSO) or Facilities Management team to schedule access, obtain necessary country clearances, and comply with local security and customs requirements;
- Response times – anticipated timeframes for initial response and on-site arrival, accounting for post location (e.g., high-threat vs. standard posts) and regional logistics;
- Parts and logistics – how replacement parts or materials would be sourced and shipped to the post, including any customs, or import/export control considerations; and
- Limitations – any posts, regions, or security environments where your firm would be unable to provide direct warranty service, and what alternative arrangements (e.g., remote technical support, depot-level repair) would apply in those cases.
j. Does your firm have bonding capacity sufficient to support a multi-year IDIQ of this size? If comfortable sharing, please indicate your bonding capacity or capacity range.
k. Would your firm be interested in, or already positioned for, teaming or subcontracting arrangements with other firms to meet the full scope of this requirement?
l. Are there any customer-furnished vehicle chassis considerations (e.g., Government-furnished base vehicles vs. contractor-procured) that would affect your proposed approach or pricing?
m. Do you foresee any barriers (e.g., export control licensing, material sourcing, facility capacity) that could limit competition or timely performance under this requirement?
SUBMISSION INSTRUCTIONS
Deadline: Responses must be received no later than 11:00 AM EST on October 23, 2026.
Submission Method: All responses, including attachments and any questions regarding this Notice, should be submitted electronically to:
- Maria Anguiano: anguianom@state.gov
- Wanda I. Cruz: cruzwi@state.gov
Subject Line: Sources Sought Response – Motor Vehicle Body Manufacturing
Award Overview
Possible prior contract
Inferred, not confirmedInferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.
Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 1Version 1Sources SoughtCurrent
Civilian Armored Vehicle Manufacturers
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Supply and Delivery of two (2) armored Sport Utility Vehicles (SUVs) as set forth in the attached Combined Synopsis and Solicitation and its attachments. Changes 9/22/2026: Correction of Place of Performance to read Ecuador. 11/6/2026: Amendment 0001 incorporates 1) a minor edit on page 9 of the Combined Synopsis and Solicitation and 2) Attachment 4 with Questions and Answers. | 72% | Combined Synopsis | 11/17/2026 |
The U.S. Embassy, Homeland Security Section in Pretoria, South Africa, is requesting quotes for the supply and delivery of 2 x new Right-Hand Vehicles, as per scope of work attached. The reference number for this quotation is: 19SF7527Q0002 Quotations: Quotes to be submitted by no later than close of business, November 19, 2026 and must be sent electronically to: Pretoria_Contracting_Office-dl@state.gov Firm fixed pricing is to be quoted. Delivery: DDP to Pretoria, South Africa, with all transport costs included. Quotes to be submitted on company letterhead, indicating the company’s address, contact details and name and email of the contact person. ALL vendors wishing to quote MUST be registered in the American System for Award Management (SAM). You can access the SAM database at https://sam.gov/ where you will find step by step instructions on how to register or update your SAM registration. Guidance on how to register in SAM.gov - https://www.fsd.gov Proof of your SAM registration must be submitted as part of your quotation package. NB!! To facilitate our evaluation process, we kindly request that you submit your quotation as two separate documents: Pricing Proposal – This document should include pricing only Technical Proposal – This document should contain the detailed technical specifications only. Please do not include any pricing information in this document. Separating the pricing and technical proposals will help ensure an efficient and impartial review process. U.S. Embassy Payment terms: Note that NO DEPOSIT payments will be authorized. The Embassy issues only fixed priced contracts: therefore, you must confirm that your prices will remain fixed. EFT – Payment will be made in 30 calendar days after delivery of services AND receipt of a proper invoice, whichever is later. Kindly be advised that as a Diplomatic Mission we represent the U.S. Government and are unable to sign any legal documents, including credit applications and T’s & C’s. By submitting a proposal, you waiver any such requirement. The following documents are attached to this email and need to be signed when submitting your quotations: The SCOPE OF WORK. The successful offeror will be required to: Must be registered on the SAM website (www.sam.gov). Must comply with the US Clauses (attached) signed document to be submitted with the quotes. South African Terms and Conditions do not apply; by submitting a quote, you accept the U.S. Embassy’s Terms and Conditions. Comply with the U.S. National Defense Authorization Act (NDAA) Section 889(a)(1)(B) (please refer to the attached PDF document) | 69% | Solicitation | 11/19/2026 |
The U.S. Embassy London requires the supply, delivery, and registration of a new SUV‑type vehicle in accordance with the specifications and terms and conditions set out in this document. The U.S. Government intends to award a contract/purchase order under this solicitation to the lowest‑priced, technically acceptable (LPTA) responsible offeror/quoter, in accordance with FAR 52.212‑1. The Government intends to make an award on the basis of initial quotations, without conducting discussions, but reserves the right to hold discussions with companies within the competitive range if necessary. Only companies or individuals specializing in this field should apply. Interested parties should download the RFQ package attached to this advert and provide their quotation to Procurement_Box7@state.gov, referencing I.D. # 19UK5626Q0029 in the Subject Line before 1700 BST on May 18, 2026 | 69% | Solicitation | 05/18/2026 |
The U.S. Embassy London requires the supply, delivery, and registration of a new SUV‑type vehicle in accordance with the specifications and terms and conditions set out in this document. The U.S. Government intends to award a contract/purchase order under this solicitation to the lowest‑priced, technically acceptable (LPTA) responsible offeror/quoter, in accordance with FAR 52.212‑1. The Government intends to make an award on the basis of initial quotations, without conducting discussions, but reserves the right to hold discussions with companies within the competitive range if necessary. Only companies or individuals specializing in this field should apply. Interested parties should download the RFQ package attached to this advert and provide their quotation to Procurement_Box7@state.gov, referencing I.D. # 19UK5626Q0028 in the Subject Line before 1700 BST on May 18, 2026 | 69% | Solicitation | 05/18/2026 |
Amended to include set aside code. UTILITY VEHICLE | 68% | Combined Synopsis | 03/19/2026 |
Additional Details
Solicitation Number
DEAV2027-001
Archive Date
Nov 7, 2026
Office Address
WASHINGTON, DC, 20520