GovChime
Notice ID: 416d19518e3e7abea67829a3ea2ef8b1Presolicitation

IPC Global Advanced Automated Asphalt Saw

Archived on December 27, 2016. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:00 PM UTC+01:00
Posted
November 25, 2016
Notice type
Presolicitation
NAICS
423830: Industrial Machinery and Equipment Merchant Wholesalers
Agency
Department of TransportationFEDERAL HIGHWAY ADMINISTRATION

Notice details

Office
693JJ3 ACQUISITION AND GRANTS MGT
Place of performance
Federal Highway Administration Research Development & Technology Office of Infrastructure 6300 Georgetown Pike , Mclean, 22101
PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
DTFH6117Q00004
Notice ID
416d19518e3e7abea67829a3ea2ef8b1

Description

Pursuant to 13.106-1(b), the Federal Highway Administration (FHWA) intends to negotiate a sole source purchase order with the Controls Group USA (IPC Global) for an IPC Global AUTOSAW II - Advanced Automated Asphalt Saw. The IPC Global Automated Asphalt Saw will be used at the FHWA Turner Fairbank Highway Research Center within the Bituminous Mixture Laboratory in order to cut asphalt concrete specimens to fabricate specimens for various performance tests. The quality of the performance testing is significantly depending on the quality of the testing specimen. The capabilities that the Bituminous Mixture Laboratory requires in an asphalt saw are as follows: 1. The device must be fully automated so that table moves horizontally under automated control. 2. The saw needs to provide enough clearance to cut the full height of the specimen up to 200mm. 3. The device must have a clamping mechanism that can be adapted to hold different specimen shapes including but not limited to cylinder, trapezoidal specimen, semi-circular specimen and disk-shaped specimen. 4. The device must be able to have enough travel distance for the length of flexural beam specimens (500mm). 5. The device must have a protective cover. 6. The device must be suitable and durable in a dusty and wet environment. The intent of this notice is not to request competitive proposals, and any information received from interested parties will only be considered solely for the purpose of determining whether a competitive procurement should be conducted. However, interested parties may submit a description of their firm's capabilities for satisfying this requirement, which demonstrates they possess the ability to successfully perform this effort. The responses must be received by December 12, 2016 at 12:00 PM Eastern. All questions concerning this matter should be addressed directly to Ms. Courtney Palmer at Courtney.palmer@dot.gov.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Courtney Palmer
Contract Specialist

Documents

No documents available.

Lifecycle

Solicitation:DTFH6117Q00004
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentNov 25, 2016

    IPC Global Advanced Automated Asphalt Saw

    Notice 416d19518e3e7abea67829a3ea2ef8b1 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

DTFH6117Q00004

Archive Date

Dec 27, 2016