Notice ID: b32151170b6f4d7ca0a70017aad03cdbSpecial Notice
US Army N-ViroMotive GenSet Locomotive Technical and Repair Support Services
Archived on January 14, 2017. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:59 AM UTC+01:00
- Posted
- December 5, 2016
- Notice type
- Special Notice
- NAICS
- 488210: Support Activities for Rail Transportation
- Agency
- Department of TransportationOFFICE OF THE SECRETARY
Notice details
- Office
- 6913G6 VOLPE NATL. TRANS. SYS CNTR
- Place of performance
- Fort Riley, Kansas; Fort Hood, Texas; Fort Carson, Colorado and Fort Bliss, Texas
- PSC
- J: MAINT, REPAIR, REBUILD EQUIPMENT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- DTRT5717Q80032
- Notice ID
- b32151170b6f4d7ca0a70017aad03cdb
Description
The U.S Department of Transportation, John A. Volpe National Transportation Systems Center (Volpe Center), Cambridge, MA, in support of the U.S. Army is seeking expert technical support services to properly diagnose issues and make repairs and adjustments to reduce emissions and increase efficiency on four (4) N-ViroMotive GenSet locomotives located at Fort Riley, Kansas; Fort Hood, Texas; Fort Carson, Colorado and Fort Bliss, Texas. The Government intends to award a Purchase Order on a sole source basis under FAR Subpart 13.106-1(b) to National Railway Equipment Company (NRE). The NAICS Code is 488210; the Small Business size standard is $15.0 million. Notice: Interested firms must submit a written capability statement to the above named point of contact providing clear and convincing evidence of the firms' capability to provide the required services. Written capability statements must be submitted within five (5) calendar days from the date of publication of this synopsis. Responses received after five (5) calendar days or without the required documentation will be considered non-responsive and will not be considered. Such documentation will be utilized solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. The Government will not pay for any documentation provided in response to this synopsis and documentation received will not be returned to the sender. A determination by the Government not to compete this requirement on a full and open competitive basis, based upon responses received to the synopsis, is solely within the discretion of the Government. Telephone calls made in place of the required documentation will not be accepted.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
DTRT5717Q80032- Special NoticeCurrentDec 5, 2016
US Army N-ViroMotive GenSet Locomotive Technical and Repair Support Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a Request for Information (RFI) only. Purpose This RFI seeks information regarding providing Thermal Protection Systems (TPS) for railroad tank cars to the U.S. DOT Volpe Center. A qualified vendor must demonstrate they are able to provide either complete test specimens as detailed further below or sufficient materials to fabricate completed test specimens without the need for specialized facilities or techniques. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to procure a minimum of two (2) pool fire test specimens and two (2) torch fire test specimens for each TPS. Multiple TPS of different construction from the same vendor may be considered. The Pipeline and Hazardous Materials Safety Administration (PHMSA) maintains a list of tank car TPS that have been tested and shown to comply with the requirements of Appendix B to 49 CFR Part 179. Inclusion on this list is not a requirement for a TPS to be used on a tank car. There is a preference of TPS that are currently on the PHMSA list and/or being used on tank cars, but other systems may be considered. Scope of Information Requested The U.S. DOT Volpe Center is seeking information from tank car thermal protection system manufacturers and/or vendors, on their willingness, ability, and requirements to provide the physical specimens as well as material and installation information needed to conduct the above fire testing research. Description of how the TPS is assembled. Example : 1 inch insulation – Brand XXX 1 inch fiberglass – generic 11 gauge steel jacket – generic 10 mils coating – Brand YYY, Component A and Component B in 1:1 volume ratio Include any relevant brand names or item numbers specific to this system. Also include any required surface preparation or other processing steps. Is the TPS currently used on railroad tank cars? If so, is it on the PHMSA approved list here: https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Are you capable of supplying fully assembled test specimens? If YES, do you require government furnished plates on which to apply the TPS? If NO, are you prepared to supply detailed instructions on fabrication, including any considerations for required equipment, cutting, bonding, forming, attachment, surface preparation, mixing, curing/drying or any other fabrication steps? What is the required lead time for either assembled test specimens or sufficient materials for third-party fabrication? Your willingness to sell TPS for this third-party testing effort. Availability and willingness to share any existing pool and/or torch fire testing data on the subject TPS, and any sensitivities or proprietary data protections that would be needed prior to sharing such information. Estimated prices of either assembled test specimens or sufficient materials for third party fabrication. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | - | Market Research | 11/20/2026 |
This is a non-personal services contract to provide Base Operation and Support Services for the U.S. Army Garrison Ansbach at Katterbach- Katterbach Kaserne , Illesheim-Storck Barracks and the Bridge in Oberdachstetten Frankenkaserne and Wicklesgreuth. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non- personal services necessary as defined in the Performance Work Statement (PWS).UPDATE: Extension of offer due date issues NOV 13 26 12:30 A.***************** Site Visit******************************The purpose of this update is to inform you that the Government has scheduled a Site Visit at USAG Ansbach for above Solicitation on Thursday, 5 November 2026 at 11:30 a.m. Central European Standard Time. Please meet us at Katterbach Housing Gate the entrance from Untereichenbach at 11:00 a.m., to give us enough time to sign you in. 1. The purpose of this modification is to update the CLIN structure and extend the solicitation close date to 16 November 2026 1400hrs CET.2. All other terms and conditions remain the same. | - | Solicitation | 11/16/2026 |
FY26 Sidetrack Roadbed Maintenance at the U.S. Government Sidetrack NO. 342 and 343 TSURUMI POL Areas (OU-1 and OU-2), in the U.S. Commander Fleet Activities Yokosuka (CFAY), JAPAN | - | Special Notice | 05/22/2026 |
FY26 Inspection of Sidetracks and Maintenance of Electrical Systems at the U.S. Government Sidetrack No. 342 and 343 Tsurumi POL Areas (OU-1 and OU-2) in the U.S. Commander Fleet Activities Yokosuka (CFAY), JAPAN | - | Special Notice | 05/22/2026 |
FY26 Sidetrack Roadbed Maintenance at the U.S. Government Sidetrack NO. 342 and 343 TSURUMI POL Areas (OU-1 and OU-2), in the U.S. Commander Fleet Activities Yokosuka (CFAY), JAPAN | - | Solicitation | 04/27/2026 |
Additional Details
Solicitation Number
DTRT5717Q80032
Archive Date
Jan 14, 2017