GovChime
Notice ID: fa729f8f020bb305bd0a602ee7c165fbPresolicitation

BAA for Proposed Research on Oil Spill Response Operations

Archived on March 3, 2017. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:00 AM UTC+01:00
Posted
January 17, 2017
Notice type
Presolicitation
NAICS
541990: All Other Professional, Scientific, and Technical Services
Agency
Department of the InteriorBUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT

Notice details

Office
ACQUISITION MANAGEMENT DIVISION
PSC
A: RESEARCH AND DEVELOPMENT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
E17PS00024
Notice ID
fa729f8f020bb305bd0a602ee7c165fb

Description

IGF::OT::IGF Broad Agency Announcement for Proposed Research on Oil Spill Response Operations on the U.S. Outer Continental Shelf

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Shin, Paige

Documents

No documents available.

Lifecycle

Solicitation:E17PS00024
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentJan 17, 2017

    BAA for Proposed Research on Oil Spill Response Operations

    Notice fa729f8f020bb305bd0a602ee7c165fb on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS NOT A REQUEST FOR PROPOSAL. THERE WILL NOT BE A SOLICITATION AVAILABLE AT THIS TIME. This special notice is being issued in order to provide all interested parties with information on the planned acquisition strategy as determined through market research. This requirement will be pursued as a sole source to the Center for Public Service Excellence (CPSE). A sources sought notice was posted to NECO/FedBizOps on 4 June 2019 (N6247019RFI01) to determine the availability of businesses capable of performing the requirement. Market research revealed only one company fully technically capable of meeting the stated requirements. NAVFAC Atlantic’s Office of Small Business Programs concurs with the determination to award to on a sole source basis to CPSE, a non-profit, large business. The approved and redacted single source determination is attached.
56%
Market ResearchOpen
1. General. This is a SOURCES SOUGHT for an upcoming Service Contract for HYDROPOWER TECHNICAL RESEARCH AND KNOWLEDGE EXCHANGE. It is for informational/market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION UNDER FAR SUBPART 5.2. This Sources Sought is to gain knowledge of the interest, capabilities, and qualifications of industry so the government can make informed business decisions. We are seeking responses from both large and small business members of industry to include: Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and Veteran Owned Small Business (VOSB). All interested parties are highly encouraged to respond. Reponses to this Sources Sought announcement will be used by the Government to make business decisions and to inform potential future solicitations. a. The North American Industrial Classification Code (NAICS) for this requirement is: 541990 - All Other Professional, Scientific, and Technical Services b. The related size standard is: $19.5M c. Product Service Code is: R425 d. Formal Sources Sought Response Due – December 3, 2026 at 12:00pm Pacific Time. 2. Background. As the nation's leading hydropower asset owner and operator with 75 Corps owned hydropower projects across the U.S., USACE is charged with improving the capability, reliability, and safety of the Corps' hydropower infrastructure by developing or advancing state-of-the-art technology, innovative practices, and operational improvements. USACE's Hydroelectric Design Center (HDC) located in Portland, OR, Engineering Research and Development Center (ERDC) located in Vicksburg, MS, and the Hydropower R&D Advisory Committee (members from HDC, ERDC, HQ, and the Corps' 16 hydropower Districts) have taken the lead on managing the Hydropower R&D mission to include determining the industry needs, setting priorities, and managing the execution. 3. Project Scope. a. USACE Hydropower is conducting market research to identify available approaches for obtaining relevant technical information and research findings, exchanging technical knowledge with other owners and operators, and addressing shared technical problems. The government seeks access to technical research, practical guidance, and industry operating experience to support decisions concerning the design, operation, maintenance, protection, and modernization of hydropower facilities and associated electrical infrastructure. The anticipated areas of interest are: Hydropower equipment design, operation, maintenance, and associated best practices. Protection and control systems for hydropower facilities and associated electrical infrastructure. Economic evaluation and modeling of hydropower assets to support modernization planning. Potential approaches may include access to existing technical publications, technical exchanges, research services, collaborative investigations, training, or combinations of these services both virtually and through conference/workshop forums. b. Anticipated Period of Performance: January 01, 2027 – December 31, 2027 c. Number and Type of Contracts: NWP contemplates awarding one firm fixed price service contract. 4. Submission Instructions. Formal responses to this Sources Sought notice must be submitted electronically (via email) with SUBJECT: Sources Sought – Hydropower Technical Research. Please email to Nicholas Weaver, Contract Specialist, at Nicholas.E.Weaver@usace.army.mil and Contracting Officer, at nicole.a.adams@usace.army.mil before 12:00PM Pacific Time on December 03, 2026. Interested parties’ responses to this Sources Sought shall be limited to six (6) pages and shall include the following information: Firm's name, address, point of contact, phone number, e-mail address, CAGE and Unique Entity ID Firm's business category and size: Large Business (include summary of small business participation metrics), Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and at the subcontracting level, Veteran Owned Small Business (VOSB). An explanation of the prime firm’s capabilities, special qualifications/certifications and equipment and describe the work to be self-performed as it pertains to the proposed work outlined in the Project Scope. In submitting capability statements for consideration, offers should address the following: i. Which capabilities you provide, how they are delivered, and any limitations on access or use. ii. Which of the three technical subject areas they support. iii. Describe available research, publications, technical exchanges, training, and research-participation opportunities. iv. Provide representative topics or examples sufficient to demonstrate relevance. v. Explain access arrangements, licensing restrictions, and internal-sharing limitations. vi. Distinguish services included in a standard offering from separately priced services. 4. Project Examples (for Joint Ventures, please include projects completed by the Joint Venture if available): i. To be considered for a potential set aside strategy, provide a maximum of three (3), minimum of one (1) project(s). These project examples must be similar in size, scope and complexity to the work described in paragraph 3 of this notice, with a description of each project (to include pertinent qualitative and quantitative information about featured scope elements), and include the following: Project Title Contract Number Contract award date Customer name, phone number and email address Prime or Subcontractor Initial contract dollar value Final contract dollar value Initial contract completion date Final contract completion date Customer satisfaction Note: The Government may verify information in CPARS or PPIRS. 5. Firm's Joint Venture information if applicable - existing and potential. 6. Firm's interest and the likelihood in bidding on the solicitation when it is issued. (Refer to planned advertise and performance dates) 5. Disclaimer and Important Notes. This notice does not obligate the Government to award a contract. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow up information. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization's capabilities to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or to provide feedback to respondents with respect to any information submitted. All interested firms must be registered in the System for Award Management (SAM) at https://www.sam.gov to have size status considered. You must remain current for the duration of the source selection process to be eligible for award of a Government contract.
54%
Market Research12/03/2026
Amendment 01 The purpose of this amendment # 01 is to clarify the RFQ requirements by responding to questions submitted and also to add IT applicable clauses into the solicitation. Unless specifically noted, all other terms remain unchanged. Note: The Offeror should acknowledge on the cover page or first pages on its Quote receipt of this amendment. Please see the attached Amendment 01_SMART for more details. Title: SMART IRB Governance, Administration, and Operations Support (GAOS) This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This acquisition is for a commercial item or service and is conducted under the authority of the Federal Acquisition Regulation (FAR) FAR Subpart 13.5—Simplified Procedures for Certain Commercial Items; and FAR Part 12— Acquisition of Commercial Items; and is expected to exceed the simplified acquisition threshold. Introduction and Background Objectives The National Center for Translational Sciences (NCATS) requires a partner to facilitate user administration, process/workflow improvements, content development/moderation, requirements gathering, and dissemination of the SMART IRB (Streamlined, Multisite, Accelerated Resources for Trials Institutional Review Board) portfolio of services. SMART IRB relies on three systems: (1) the SMARTIRB.org website which is used for content distribution, notification, and educational purposes, (2) Joinder, through which institutions enter institutional information and sign the SMART IRB Authorization Agreement (AA), and (3) the Online Reliance System (ORS), through which Institutional Review Board (IRB) reliance arrangements under the SMART IRB Agreement are documented on a study-by-study basis. The selected partner will provide support in accordance with this SOW to aid in the facilitation and growth of SMART IRB. Please see the attached RFQ 75N98026Q00287 for more details
54%
Combined Synopsis11/13/2026
The NIOSH OMSHR is seeking proposals from universities or colleges with ABET-accredited programs in mining engineering specifically focused on aspects of mining safety and health that addresses research, exploratory development, or testing of new innovations and technologies, and/or methods of evaluation of new and existing mining practices to improve mine health and/or safety.
54%
Solicitation01/11/2027
THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. This notice does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The Government is not seeking proposals at this time. NO PROPOSALS ARE BEING REQUESTED OR ACCEPTED IN RESPONSE TO THIS NOTICE. OTHER THAN SMALL BUSINESS AND SMALL BUSINESS RESPONSES ARE ENCOURAGED FOR THIS SOURCES SOUGHT NOTICE. This announcement does not obligate the Government to award a contract, nor does it obligate the Government to pay for any preparation costs. The information provided in this notice is subject to change and does not bind the Government. Interested sources are discouraged from submitting commercial literature in response to this notice. Any submissions of such product literature or catalog cut sheets will be treated separate from, and will have no bearing on, any subsequent evaluation of proposals submitted in response to any resulting future formal Request for Proposal (RFP). AGC has not made a commitment to procure any of the products or services discussed, and the release of this notice should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. AGC will not pay for information or comments provided and will not recognize any costs associated with submission of comments. All submissions become Government property and will not be returned. The Government anticipates a Single Award Indefinite Delivery/ Indefinite Quantity (ID/IQ) contract and Sample Task Order. Background: The US Army Geospatial Center’s (AGC) Three-Dimensional High Speed-High Altitude Mapping Operations & Technology Integration (3DH2-M O&TI) program provides timely, accurate and relevant High Resolution Three-Dimensional (HR3D) Data to enable geospatial information, capabilities, and domain expertise for the Army Geospatial Enterprise implementation and Geospatial Data Fabric. The 3DH2-M mission provides critical information to the Warfighter in all Domains and in all Combatant Commands (CCMDs). The purpose of the 3DH2-M mission is to collect, process, disseminate, store, and maintain data collected by conducting wide area high altitude flight operations. Processed 3DH2-M data serves as foundational geospatial data products for the Department of Defense (DoD), Coalition Partners, and Host Nations. Data collection is primarily Outside of the Continental U.S. (OCONUS) with some in the Continental U.S. (CONUS). The data provided from 3DH2-M supports Government efforts for terrain analysis, change detection, threat analysis, intelligence preparation of the battlefield (IPB), operational and tactical mission planning, intelligence, surveillance, and reconnaissance (ISR) support, engineer planning, Aerial Port of Debarkation (APOD), Seaport of Debarkation (SPOD), Large Scale Combat Operations (LSCO), Counter Insurgency (COIN), Humanitarian and Disaster Relief (HADR) and many other uses. The Warfighter Support Directorate (WSD), 3DH2-M Program is a part of the US Army Corps of Engineers (USACE) at the US Army Geospatial Center (AGC). The 3DH2-M Program focuses on providing high fidelity geospatial foundational data/terrain mapping, and provides support to all authorized Army, DoD, and other government organizations. The purpose is to collect, process, disseminate, apply, and maintain HR3D geospatial data by conducting flight and collection operations and by processing and producing the required 3DH2-M data products (comprised of but not limited to terrestrial and bathymetric LiDAR, EO, Synthetic Aperture Radar (SAR), Hyperspectral Imaging (HSI), Full Motion Video (FMV), Special Intelligence (SI), and unclassified commercial satellite imagery data). In addition, the Department of Defense (DoD) is pursuing advancements in terrestrial and bathymetric LiDAR, SAR, HSI, and FMV sensor technology. This is a result of the operational requirement to provide high fidelity terrain mapping from a higher altitude, higher velocity aircraft platform (to reduce risk from adversary fire). DoD requires advancement in supporting terrestrial and bathymetric LiDAR, SAR, HSI, and FMV data processing, storage, and dissemination technology. Current terrestrial and bathymetric LiDAR collection systems are rapidly improving/increasing area collection rates as well as increasing the geospatial fidelity of the data. In order to keep pace with the improving collection systems, improved, more rapid data processing needs to be integrated into the 3DH2-M program. The 3DH2-M program is also looking for emerging technology integration for LiDAR (terrestrial and bathymetric), Electro Optical (EO), SAR, HSI, FMV, SI, and Measurement and Signals Intelligence (MASINT) sensors. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform the 3DH2-M support task except for those items specified as government-furnished property, services, and information. This acquisition is a non-personal service and is not for performance of Inherently Government Functions. Feedback addressing the clarity, feasibility, scope, and potential alternative means of meeting the Government's requirement is sought. The Government anticipates five (5) task orders against the Single Award ID/IQ. The Government anticipates one (1) of the following NAICS codes. NAICS: 541990 - All Other Professional, Scientific, and Technical Services NAICS: 541370 - Surveying and Mapping (except Geophysical) Services The Government anticipates a single award ID/IQ Period of Performance (PoP) of one (1) 12-month base period and four (4) 12-month option periods. The anticipated PoP start date is 12 August 2027. The Government anticipates a Sample Task Order PoP of one (1) 12-month base and one (1) 12-month option period. The anticipated PoP start date is 12 August 2027. Services are currently under the HR3DGI O&TI III OASIS+ Task Order (Contract No. 47QRCA 25DU210 / Task Order No. W5J9CQ25F0017) Purpose: The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of firms capable of performing the functional requirements contracts of this magnitude, and to address any questions, recommendations or concerns from Industry. The Government must ensure there is adequate competition among potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this Sources Sought Notice announcement. This Sources Sought Notice is not intended to be a Request for Proposal nor Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. It is to request statements regarding the company's ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted with the Capabilities Statement. Submission of Capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Corps of Engineers in tailoring requirements to be consistent with industry capabilities. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Security Requirements: The contractor will be required to have access to data and systems that are for Unclassified, Controlled Unclassified Information (CUI), Secret, Top Secret (TS), Sensitive Compartmented Information (SCI), Special Access Program (SAP) and/or Alternative Compensatory Control Measures (ACCM) during performance of the task order(s). All personnel, assigned to future task orders, accessing government facilities and/or systems shall possess at least a SECRET clearance. Key personnel, assigned to future task orders, shall possess a TOP SECRET clearance and be eligible for SCI adjudication on the start date of a task order period of performance, per the needs of each task order. Please see the attached DRAFT Performance Work Statements for further security requirements information. CMMC Requirements: The scope included in this upcoming requirement requires the contractor and/or subcontractor(s) information system to process, store, or transmit Federal Contract Information (FCI) or Controlled Unclassified Information (CUI), and requires the contractor and/or subcontractor(s) to comply with CMMC requirements. The Government anticipates that the Contractor shall have and maintain for the duration of this contract, order, or agreement a current CMMC status at the following CMMC level, or higher: CMMC Level 2 (Self) minimum and/or CMMC Level 2 (C3PAO) preferred for all information systems used in performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI. See DFARS 252.204-7021 Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements, for the definitions, requirements, reporting, and subcontract information for this contract/order/agreement. Requested Information: You must submit a completed Sources Sought Questionnaire and Capability Statement in accordance with (IAW) the below information. Do not send your organization’s standard Capabilities Statement or Brochure. The Government is requesting specific information in order to determine Other Than Small Business and Small Business capabilities. The Government may use information received under this notice to determine if a small business reserve or set-aside is appropriate. This Sources Sought Notice does not restrict the Government to the ultimate acquisition approach. Sources Sought Questionnaire: You must complete and submit the attached Sources Sought Questionnaire. Your responses will be the primary tool used for our market research. Please be as detailed and accurate as possible. Capability Statement: Request companies submit a Capability Statement that presents your technical capability for providing the support services as it relates to the subject requirements. The Capability Statement shall at the minimum address the specific areas as identified below. Please provide the following: 1) A brief Statement of Capability (maximum 15 pages) size 12 Arial/Times New Roman Font; which demonstrates the company’s ability to meet what is listed in the DRAFT Single Award ID/IQ PWS and DRAFT Sample Task Order PWS. The Government is seeking those that possess and demonstrate an in-depth understanding of all the requirements. Mark any proprietary information accordingly. 2) Provide maximum of three (3) Relevant Past Performance information on PRIME Government contracts of similar size and scope within the past three (3) years. Also, if you can provide the specific contract number to allow for review. Relevant Past Performance information will be limited to maximum of three (3) per each occurrence. 3) Capability of providing technical competency and experience in the listed set of requirements, as a Prime contractor or using subcontractors and/or partners Subject of email for Capability Statement shall be as follows: Three-Dimensional High Speed - High Altitude Mapping (3DH2-M) for USACE Army Geospatial Center – Capability Statement – Vendor Name Questions regarding the Requirements shall be submitted using the following format: Question #1: Requirements #: Or Question #1: General Direct all Capability Statement Responses, Sources Sought Questionnaire Responses, and Questions to Contract Specialist, Courtney Freeman, Courtney.D.Freeman@usace.army.mil and Contracting Officer, Angela Lape, Angela.S.Lape@usace.army.mil for planning purposes. Please see the attached 3DH2-M O&TI Sources Sought Questionnaire, DRAFT Single Award ID/IQ Performance Work Statement (PWS), and DRAFT Sample Task Order PWS.
54%
Market Research02/19/2026

Additional Details

Solicitation Number

E17PS00024

Archive Date

Mar 3, 2017