GovChime
Notice ID: e30c37a23ea44bd18739440ab0851d4cSolicitation

WHC Marshall Hall Cubicle (Brand Name Steelcase Montage)

Responses closed . Full description on SAM.gov.

Overview

Response deadline
2:00 PM EDT
Posted
September 1, 2026
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
337214: Office Furniture (except Wood) Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC FDO FT BRAGG
Place of performance
Fort Bragg, NC, Building 8 1808 Marshall Hall, Building 8 2312 IPN, Building 1 1460 Firestone, Building N5332 FIROC, Building T 2645 Camp Mackall , 28394
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W9124726TQ500
Notice ID
e30c37a23ea44bd18739440ab0851d4c

Description

The Mission and Installation Contracting Command Center Fort Bragg MICC Center FB has a continuing requirement from the US Army Reserve Command USARC United States Army Western Hemisphere Command USAWHC Headquarters to provide customized service solutions to reconfigure existing office cubicles. This has been an ongoing requirement for USAWHC and USARC over the last few years. The contractor must therefore build on existing cubical configurations. All components procured under the anticipated contract shall therefore match the existing Steelcase Brand Montage Configuration Solutions currently in place for USAWHC and USARC. The primary objective of this requirement is to provide Steelcase brand name, Montage Style cubicle components and office cubicle installation reconfiguration services for the HQ USAWHC and USARC. Specifically, this primary objective includes the following tasks. The Contractor shall have the capability to procure Steelcase brand cubical components from the Montage Catalogue Technical Exhibit 4. Contractor shall assume responsibility for the delivery, protection, documentation and storage of these cubical components prior to installation. The Contractor shall assemble and install all procured office cubical components IAW the manufacturers instructions/warranty provisions and specifications given by the customer. Contractor shall furnish qualified personnel with the tools, materials and safety equipment required to perform the required assemblies. Please provide Pricing Catalogue or Pricing Guide specific to Steelcase Montague with submittal.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1SolicitationCurrent

    WHC Marshall Hall Cubicle (Brand Name Steelcase Montage)

    Notice e30c37a23ea44bd18739440ab0851d4c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
UPDATED 06 NOV 2026 -SOLICITATION AMENDMENT 02 The purpose of Amendment 0002 is strictly administrative in nature to incorporate the Past Performance Questionnaire (PPQ) and the Questions and Answers (Q&A) Matrix- Template, which were inadvertently omitted from the previous package upload. Offerors are advised that all vendor questions submitted via email in accordance with solicitation instructions remain under government review and will be formally addressed in a subsequent response; the release of these attachments does not alter or supersede pending inquiries. Except as provided herein, all terms, conditions, specifications, and requirements of the solicitation remain unchanged and in full force and effect. UPDATED: 30 OCT 2026 - SOLICITATION AMENDMENT 01 The 410th Contract Support Brigade (CSB) – Regional Contracting Office (RCO) Miami hereby issues AMENDED Solicitation No. W91QEX-27-Q-A001 01 for the acquisition of a Firm-Fixed-Price (FFP) contract action supporting the United States Southern Command (SOUTHCOM) and the USSOUTHCOM Joint Task Force – Western Hemisphere (JTF-WHEM). The Government requires a complete turnkey solution to modernize two (2) operational workspaces with modular ergonomic workstations and supporting office furniture. The resulting contract requires the awardee to provide all project management, design services, pre-installation site surveys, freight and delivery, removal and disposal of existing furniture, assembly, installation, and final acceptance testing. All proposed pricing must be fully inclusive of all freight, labor, materials, and services required to deliver fully operational workspaces. Work is distributed across two (2) primary operational areas with the following targets: • Room 1 – JPG: Propose a room layout to accommodate and furnish at least 35 workstations (planning target: approximately 35). • Room 2 – POD: Propose a room layout to accommodate and furnish at least approximately 35 workstations (planning target: approximately 35). Submissions must demonstrate compliance with all ergonomic, design, and operational specifications outlined in the Statement of work (SOW). NOTE: Please note that the previously issued Sources Sought notice was conducted for market-research and planning purposes only. It was not a solicitation, request for proposal, request for quotation, or commitment by the Government to award a contract. The solicitation is a separate procurement action and is the controlling document for this requirement. Vendors should rely on the solicitation, including all attachments, amendments, and formally issued questions and answers, when preparing a response. Information submitted in response to the Sources Sought does not replace, satisfy, or carry forward as a response to the solicitation. Interested vendors must submit a complete response in accordance with the solicitation’s stated instructions and deadline. Any questions concerning the solicitation should be submitted through the method identified in the solicitation. ________________________________________________________________________________________________________ The 410th Contract Support Brigade (CSB) – Regional Contracting Office (RCO) Miami hereby issues Solicitation No. W91QEX-27-Q-A001 for the acquisition of a Firm-Fixed-Price (FFP) contract action supporting the United States Southern Command (SOUTHCOM) and the USSOUTHCOM Joint Task Force – Western Hemisphere (JTF-WHEM). The Government requires a complete turnkey solution to modernize three (3) operational workspaces with modular ergonomic workstations and supporting office furniture. The resulting contract requires the awardee to provide all project management, design services, pre-installation site surveys, freight and delivery, removal and disposal of existing furniture, assembly, installation, and final acceptance testing. All proposed pricing must be fully inclusive of all freight, labor, materials, and services required to deliver fully operational workspaces. Work is distributed across three (3) primary operational areas with the following targets: • Room 1 – JPG: Propose a room layout to accommodate and furnish at least 35 workstations (planning target: approximately 35). • Room 2 – POD: Propose a room layout to accommodate and furnish at least approximately 35 workstations (planning target: approximately 35). Submissions must demonstrate compliance with all ergonomic, design, and operational specifications outlined in the Statement of work (SOW).
-Solicitation11/23/2026
Watson Desk Workstation
-Combined Synopsis09/30/2026
Reason for amendment is to purchase office chairs that are BA compliant. Office Chair. Horizontal Mesh Back. Synchro-Tilt Mechanism allows the backrest and seat to tilt in unison. Adjustable tilt for seat and backrest. Height-adjustable arms to fit your body. Padded Seat Cushion. Supporting up to 275 lbs. Must Be BA Compliant. PLEASE INCLUDE BA FORM and image of chair. See link for an example. https://caribouoffice.com/shop/p/simplicity-task-chair
-Combined Synopsis09/24/2026
8x8 office cubicles
-Combined Synopsis09/21/2026
Ergonomic Mesh Swivel Task Chair, supports up to 275lb, 18.57to 22.54 Adjustable Seat Height, Adjustable Arm Rest, Black Mesh Seat , Black Mesh Back, Black Base, Alera Hollins Model ALEHL42BME18 or an approved equal. Delivery location is 5505 Tennessee Avenue, Fort Dix NJ 08640. Delivery location does not have a loading dock. Vendor must be capable of off-loading without assistance from the Government.
-Combined Synopsis09/18/2026

Additional Details

Solicitation Number

W9124726TQ500

Archive Date

Sep 1, 2027

Office Address

FORT BRAGG, NC, 28310-0000