GovChime
Notice ID: e402b9f836d944058fd35e3a35b4139dCombined Synopsis/Solicitation

Oil Crusher

Responses closed . Full description on SAM.gov.

Overview

Response deadline
10:00 AM CDT
Posted
August 10, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
333618: Other Engine Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
696 37th StreetFort Hood, TEXAS 76544, 76544
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U3990
Notice ID
e402b9f836d944058fd35e3a35b4139d

Description

Oil Filter Crusher

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    Oil Crusher

    Notice e402b9f836d944058fd35e3a35b4139d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Ultrasonic Parts Washer. Please see attached solicitation. REASON FOR AMMENDMENT IS TO CHANGE NAICS TO 4940 AND PSC TO 333618. 2nd attempt to repost.
-Combined Synopsis11/16/2026
The requirement is for a Category II, three-point hitch boom mower (KWT 550 or equivalent) that is fully compatible with a Kubota M6-111 tractor (114 horsepower, 9,600 pounds). The boom mower must feature a maximum reach of 20 feet, a maximum transport height of 11.5 feet, and a maximum transport width of 6.5 feet. The hydraulic system requires a minimum 50-gallon oil tank capacity, integrated temperature and oil level indicators, a hydraulic safety breakaway device, a hydraulic lock, and quick-connect fittings. It must also include any additional auxiliary pumps and valves necessary to ensure complete mounting and operation on the specified Kubota tractor. For standalone storage and transport, the unit must include adjustable leg supports capable of supporting the assembly when dismounted, as well as a rear-facing road lighting kit. The cutting assembly requires a flail head attachment (KW126 or equivalent) with a minimum four-foot working width and a total weight under 650 pounds. The unit must utilize Type VI flail knives and include two full replacement sets. The deliverable also requires two copies each of the service, parts, and operators manuals, with final delivery to Fort Drum, New York.
-Combined Synopsis09/16/2026
The 15-foot offset flex arm rotary cutter requires heavy-duty 11L by 15, 12-ply tires with a minimum load capacity of 4,000 pounds. It must be capable of cutting directly in-line with the tractor or at any offset distance up to 122 inches (10.16 feet). The assembly requires a minimum two-and-a-half-inch castor pivot shaft, six-bolt hubs with at least a 6,000-pound capacity, and bolt-in replaceable axles. Major pivot points must utilize spring steel tension bushings and induction-hardened pins. Hydraulic and mechanical requirements include a minimum of four hydraulic circuits with independent wing lift for the 15-foot mower, a heavy-duty three-and-a-half by 36-inch welded hydraulic cylinder, and an optional six-port selector valve kit for independent wing action on tractors with limited hydraulic outlets. Power delivery requires a minimum rating of 200 horsepower at 1,000 RPM while accommodating 540 RPM power delivery from the tractor. A safety lighting kit is also required. Standard travel dimensions must maintain a maximum width of 70 inches to the left of the tractor and 52 inches to the right, totaling 121 inches for the arm and rotary cutter assembly. When operating with the stop block installed on the transport lock bar designed to improve clearance for oncoming traffic on narrow roads the dimensions are configured to 55 inches to the left of the tractor and 66 inches to the right (totaling 121 inches).
-Combined Synopsis09/16/2026
Fully welded top deck. Gearbox seal protection. 6-inch blade overlap. Welded top deck. Cut brush and saplings up to 3-inch. Must have a stump jumper, backed with a 1-inch thick mounting bar. Self-leveling pull-type hitch. Rear facing LED signal lights. 1 right side hinged wing section. 1-inch solid hinge rods. Wing transport lock. 1-inch enclosed front to rear dual leveling rods. 5-inch square rear axle tubing. 540 rpm: center: 17,377 fpm (88.3 mps), wings: 17,329 fpm (88 mps). 1000 rpm: center: 18,165 fpm (92.3 mps), wings: 18,317 fpm (93.1 mps). Spring-cushioned on center-axle. Bar-tite hitch. 1/2-inch x 3-inch welded deck ring. Airplane tires with foam filling. 10 year limited gearbox warranty.
-Combined Synopsis09/10/2026
Hawkway Industries HS9 Oil Filter Crusher
-Combined Synopsis08/27/2026

Additional Details

Solicitation Number

W911S226U3990

Archive Date

Aug 10, 2027

Office Address

FORT DRUM, NY, 13602-5220