Notice ID: 89f85c00e81d254ba9eb719e8c0b78c4Combined Synopsis/Solicitation
Generator and Transfer Switch Maintenance
Archived on May 30, 2014. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 6:00 PM UTC+02:00
- Posted
- March 28, 2014
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Place of performance
- NATION WEATHER SERVICE CARIBOU WEATHER FORECAST OFFICE 810 MAIN STREET, Caribou, 04736
- PSC
- J: MAINT, REPAIR, REBUILD EQUIPMENT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- EA-133W-14-RQ-0215
- Notice ID
- 89f85c00e81d254ba9eb719e8c0b78c4
Description
J- PERFORM THE FULL SERVICE MAINTENANCE SERVICE FOR CUMMINS (ONAN), KOHLER GENERATORS AND TRANSFER SWITCH SYSTEMS FOR EMERGENCY BACK-UP POWER FOR THE NATIONAL WEATHER SERVICE MAINE . NOTICE DATE: MARCH 5, 2014 Notice Type: Combined Synopsis/Solicitation NAICS: 811310 Repair and Maintenance Commercial and Industrial Machinery and Equipment Contracting Office: Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Eastern Regional Acquisition, 200 Granby Street, Suite 815, Norfolk, VA 23510 The National Oceanic Atmospheric Administration (NOAA), Eastern Region Acquisition, Norfolk, VA on behalf of the National Weather Service (NWS) is soliciting a requirement to perform the full service maintenance service for the generators and transfer switches for emergency back-up power in various location throughout the Caribou Maine Weather Stations. Provide all labor, material and equipment in accordance with the attached Statements of Work. This RFQ is 100 percent set-aside for small business concerns. The associated North American Industry Classification System (NAICS) code is 811310, which has a corresponding size standard of $7,000,000.00 or less. Solicitation number EA-133W-14-RQ-0215 issued March 5, 2014 and will close April 14, 2014 at 11:00 am EST. The total period of performance for all work specified in the Statement of Work Specification is From May 1, 2014 through April 30, 2019. All responsible sources may submit a quotation which shall be considered by the agency. The anticipated award date is on or about March 28, 2014. Contractors are encouraged to register with the FedBizOpps Vendor Notification Service as well as the Interested Vendors List for this acquisition (see applicable tab within FedBizOpps where this synopsis/solicitation is posted). Potential offerors may direct all inquiries pertaining to the solicitation in writing to stacy.p.hill@noaa.gov . Telephonic requests will not be honored.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
EA-133W-14-RQ-0215- Combined Synopsis
- 3×Combined SynopsisCurrentMar 5, 2014
Generator and Transfer Switch Maintenance
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
| - | Awarded | Open | |
SITE VISIT A site visit will be conducted on Monday, November 16, 2026, at 9:00 AM EST at the VA Medical Center, Manchester, 718 Smyth Road, Manchester, NH 03104. The purpose is to allow quoters to inspect the existing Eaton Powerware 9390 UPS, the installation location, access routes, and site conditions relevant to the UPS replacement and ongoing maintenance. Attendance is recommended but not required to submit a quotation. Quoters who do not attend are responsible for obtaining the information necessary to prepare a quote and will not be relieved of any contract obligation on the basis of not having attended. Quoters intending to attend the site visit shall notify Andrew Obrien, Deputy Chief of Facility Service, by email at Andrew.Obrien@va.gov, and CC Shawn Lawrence, Contract Specialist at Shawn.Lawrence@va.gov, no later than Thursday, November 12, 2026, at 5:00 PM EST. The email shall include the name, company, and citizenship of each attendee for facility access. Each attendee shall bring a valid government-issued photo ID and report to Facility Service in Building 6 upon arrival. Attendees shall comply with all facility safety, PPE, and security requirements. Statements made during the site visit do not change the solicitation. Any information that affects the solicitation will be furnished to all quoters only through a written amendment. Questions raised at the site visit should be submitted in writing per the instructions in 52.212-1 to receive a binding Government response. Quotation delivery: Submit quotations via email to Shawn.Lawrence@va.gov no later than November 26, 2026, at 5:00 PM EST. Questions regarding this solicitation shall be submitted in writing by email to the Point of Contact no later than 5:00 PM EST on November 19, 2026. | - | Combined Synopsis | 11/26/2026 |
NOTICE OF INTENT TO SOLE SOURCE TO MC MACHINERY SYSTEMS COMBINED SYNOPSIS/SOLICITATION NOTICE: Requirement Title: Mitsubishi Plunge &Wire EDM Corrective Maintenance at Portsmouth Naval Shipyard Solicitation Number: N3904026Q5223 Quote Response Deadline: 3/4/2026, 5:00 PM POC: Lisa Fielding, Contracts Officer, lisa.a.fielding.civ@us.navy.mil GENERAL INFORMATION: 1. This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. 2. The Portsmouth Naval Shipyard intends to award a firm-fixed-price purchase order on a sole source basis to MC Machinery Systems for the corrective maintenance of one (1) Mitsubishi Plunge EDM and one (1) Mitsubishi Wire EDM. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.103-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." The Government has determined that MC Machinery Systems is the only source reasonably available to perform the required services, as the Statement of Work requires work to be performed by a manufacturer-certified technicians using only manufacturer-approved parts and software. 3. This solicitation incorporates by reference the provisions and clauses of the Federal Acquisition Regulation (FAR) and the Defense Federal Acquisition Regulation Supplement (DFARS) that are in effect on the date of this solicitation's issuance. It is the contractor's responsibility to be familiar with the applicable provisions and clauses. The authoritative sources for the most current regulations are: FAR: The official FAR website, which reflects the ongoing "Revolutionary FAR Overhaul" (RFO): https://www.acquisition.gov/far-overhaul DFARS: The official DoD Class Deviations website, which contains the most recent updates to the DFARS: https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html 3. This solicitation is being issued as a: Request For Quotation (RFQ) 4. This acquisition is for a: Other Than Full and Open Competition (sole source to MC Machinery Systems) 5. North American Industry Classification System Code (NAICS): 811310 6. The size standard is: 12.5 million REQUIREMENT INFORMATION: The Portsmouth Naval Shipyard requests the following: The contractor shall provide all personnel, equipment, tools, materials, and supervision necessary to perform corrective maintenance on one (1) Mitsubishi Plunge EDM and one (1) Mitsubishi Wire EDM, as detailed in the attached Statement of Work (Attachment 1). Required Period of Performance: Work in the Base period shall commence within four (4) weeks of contract award and be completed within eight (8) weeks of contract award. Place of Performance: Portsmouth Naval Shipyard, Kittery, ME, 03904 METHOD OF PROPOSAL SUBMISSION: Offeror shall submit quote directly to the Contracts Officer at lisa.a.fielding.civ@us.navy.mil For the Intended Sole Source (MC Machinery Systems) Submit a quote that includes the following: A total firm-fixed-price (FFP) for all corrective maintenance work described in the SOW. A separate schedule of fully burdened labor rates, by labor category, to be used for any potential unscheduled or emergency repairs. A proposed fixed pass-through markup rate for materials and parts required for unscheduled repairs. Confirmation of the ability to meet the period of performance and all security requirements. Company name, address, CAGE code, and UEI number. Vendors must be registered in the System for Award Management (SAM) database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. ATTACHMENTS Attachment 1 Statement of Work (SOW) Attachment 2 - Work Request Form Attachment 3 - Wage Determination Attachment 4 - ID Proofing Docs Attachment 5 - Field Report CDRL A002 | - | Combined Synopsis | 03/04/2026 |
| - | Solicitation | Open | |
The work covered by this section of the specifications consists of furnishing all plant, labor, equipment, supplies and materials, and in performing all operations necessary for the inspection, maintenance, and repair of all elevators systems specified herein and in Technical Exhibit 1. The work accomplished shall be in strict accordance with applicable specifications and drawings, and subject to the terms and conditions of the Contract. See attached documents *Amendment 0001 Updates all attachments. | - | Solicitation | 01/08/2027 |
Additional Details
Solicitation Number
EA-133W-14-RQ-0215
Archive Date
May 30, 2014