GovChime
Notice ID: f4626254c8bae37bba4fa3885396dcfcAward NoticeAwarded

Program for International Student Assessment (PISA) 2015

Awarded on January 17, 2013. Full description on SAM.gov.

Awarded tounder ED-IES-13-C-0006 (source: SAM.gov award notice)• $10000.0B

Overview

Posted
January 17, 2013
Notice type
Award Notice
NAICS
541720: Research and Development in the Social Sciences and Humanities
Agency
Department of Education

Notice details

Office
CONTRACTS AND ACQUISTIONS MANAGEMEN
Place of performance
National Center for Education Statistics 1990 K Street, NW 8th Floor, Conference Room 1 Washington DC 20006 , Washington, 20006
PSC
B: SPECIAL STUDIES/ANALYSIS, NOT R&D
Last updated
Dec 6, 2025
Award date
Jan 17, 2013
Award amount (SAM.gov award notice)
$10000.0B

Identifiers

Solicitation number
ED-IES-12-R-0081
Notice ID
f4626254c8bae37bba4fa3885396dcfc
Award number (PIID)
ED-IES-13-C-0006

Description

This is an award notice for the Program for International Student Assessment (PISA) 2015 requirement.

Full description on SAM.gov

Award Overview

Award Number

ED-IES-13-C-0006

Award Amount (SAM.gov award notice)

$10000.0B

Award Date

Jan 17, 2013

Awardee

Awardee UEI

NVUWAFWQ57S5

Original Solicitation

Notice ID: f4626254c8bae37bba4fa3885396dcfc

Posted Date: Jan 17, 2013

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

5
  • 91990021F0387
    WESTAT, INC.
    Department of EducationNAICS 541720
    $3.0MSigned Nov 6, 2026
  • 91990022F0032
    WESTAT, INC.
    Department of EducationNAICS 541720
    $1.2MSigned Nov 5, 2026
  • 91990021F0387
    WESTAT, INC.
    Department of EducationNAICS 541720
    $3.0MSigned Nov 2, 2026
  • 91990026F0008
    WESTAT, INC.
    Department of EducationNAICS 541720
    $3.5MSigned Oct 29, 2026
  • 91990025C0002
    WESTAT, INC.
    Department of EducationNAICS 541720
    $8.9MSigned Oct 28, 2026

Contacts

Contracting Officer

Primary Contact

Joseph I. Gibbs
Contract Specialist

Secondary Contact

Sylvia Reid
Contracting Officer
Fax: 2022456297

Documents

No documents available.

Lifecycle

Solicitation:ED-IES-12-R-0081
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationJun 7, 2012

    Program for International Student Assessment (PISA) 2015

    Notice 526027542e5796dae98c52dd5af18170 on SAM.gov

  2. Special NoticeJun 7, 2012

    Vendor Collaboration for � Program for International Student Assessment (PISA)

    Notice 1fc969ba59b8e9137e58a4b76e23dbc3 on SAM.gov

  3. 2×
    Pre-SolicitationJul 12, 2012

    Program for International Student Assessment (PISA) 2015

    Notice bc78b03c10d31907b5c627c2772a3c68 on SAM.gov

  4. 2×
    Special NoticeOct 16, 2012

    Vendor Collaboration for � Program for International Student Assessment (PISA)

    Notice 7c4a89a59dfc817b041013a77c4aef85 on SAM.gov

  5. 2×
    Pre-SolicitationOct 19, 2012

    Program for International Student Assessment (PISA) 2015

    Notice 17dd98397f7d115b61ba9185d1b77371 on SAM.gov

  6. SolicitationNov 1, 2012

    Program for International Student Assessment (PISA) 2015

    Notice 1286ac4aa08c362e14f9488dcc01683f on SAM.gov

  7. AwardedCurrentJan 17, 2013

    Program for International Student Assessment (PISA) 2015

    Notice f4626254c8bae37bba4fa3885396dcfc on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Institute of Education Sciences (IES) and the U.S. Department of Education (ED) anticipate the release of a 2026 Small Business Innovation Research Program (SBIR) Phase IA solicitation #91990026R0003, on or about April 30, 2026. The proposal submission date will be in late June 2026, approximately 60 days after the solicitation release. The program, known as ED/IES SBIR, provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The Phase IA program solicitation will invite eligible for-profit small business firms and partners to submit proposals for $250,000 for contracts to develop and evaluate a prototype of an entirely novel education technology product (where no or limited previous development has occurred) over a period of 9 months. The goal of the Phase IA track is to solicit proposals for ground-breaking high-risk high reward approaches to solve pressing problems in education. Small Business firms and partners who possess strong research and development and evaluation capabilities for education technology products in the below priority area are encouraged to participate. PRIORITY AREA IA: Prototypes of Novel Education Technology Products for Use by Learners, Educators or Administrators (or Other School Personnel) Successful Phase IA awardees under the solicitation will be eligible to apply for a Phase II award for $1,000,000 in 2027, to fully develop and evaluate the novel education technology product over a period of 2 years and to prepare for commercialization. The result from Phase IA and the subsequent Phase II funding under this solicitation will be a novel education technology product. Three other 2026 ED/IES SBIR solicitations will be released on the same day as the Phase IA solicitation: The Phase IB program solicitation 91990026R0004 will request proposals for the development of a new component to be integrated with an existing education technology prototype or product. The existing prototype or product is required to be research-based. The resulting product from Phase IB and II funding under this solicitation will be a new version of an education technology product. The Direct to Phase II program solicitation #91990026R0005 will request proposals for the development of new education technology products to ready existing evidence-based innovations (e.g., products, interventions, tools) for commercial use at scale. Awards will be for $1,000,000 over a period of 2 years. The existing evidence-based innovation is required to have originally been conceptualized and developed by an academic researcher while at an academic institution or by a researcher at a non-profit education research organization. One or more of the academic researchers that originally created the innovation are required to participate in the project team. Projects that focus on advancing innovations that are not evidence-based will not be eligible for the Direct to Phase II program. mportant Notes: Offerors will not be permitted to submit the same or similar proposals under the 2026 Phase IA, IB, Direct to Phase II or Phase II solicitations. Any duplicate or similar proposals that are submitted under more than one of these 2026 solicitations will be rejected without review. For more information and specifications, please refer to the Phase IA, Phase IB, Direct to Phase II and Phase II solicitations after release. About the ED/IES SBIR Program The purpose of the SBIR program is to stimulate technological innovation in the private sector, strengthen the role of small business in meeting Department research and development needs, increase the commercial potential of Department-supported research results, and improve the return on investment from Federally funded research for economic and social benefits to the Nation. ED/IES SBIR provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The ED/IES SBIR portfolio consists of research-based and commercially viable products that are widely deployed to address pressing needs in education. ED/IES SBIR is a highly competitive program – historically about 5 to 7% of submitted proposals resulted in a Phase I award, about 10% result in a Direct to Phase II award, and about 50% of Phase I awardees have won a Phase II award the following year. For more information about the ED/IES SBIR program, please see: www.ies.ed.gov/sbir Please note: the primary means of communication with Department personnel is via email. Please review the FAQ page to assist you in the preparation and submission of your proposal. FAQ page: https://ies.ed.gov/small-business-innovation-research-sbir/edies-sbir-frequently-asked-questions This notice is not a request for proposals at this time. Interested parties should continue to monitor this posting for updates.
-Pre-SolicitationOpen
The Institute of Education Sciences (IES) and the U.S. Department of Education (ED) anticipate the release of a 2026 Small Business Innovation Research Program (SBIR) Phase IB solicitation #91990026R0004, on or about April 30, 2026. The proposal submission date will be in late June 2026, approximately 60 days after the solicitation release. The program, known as ED/IES SBIR, provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The Phase IB program solicitation will invite eligible for-profit small business firms and partners to submit proposals for $250,000 for contracts to develop and evaluate a prototype of a new component to be integrated with an existing education technology prototype or product over a period of 9 months. The goal of the Phase IB track is to solicit proposals for ground-breaking high-risk high reward approaches to solve pressing problems in education. Small Business firms and partners who possess strong research and development and evaluation capabilities for education technology products in the below priority area are encouraged to participate. PRIORITY AREA IB: A New Component to be Integrated with an Existing Education Technology Prototype of Product for Use by Learners, Educators or Administrators (or Other School Personnel) Successful Phase IB awardees under the solicitation will be eligible to apply for a Phase II award for $1,000,000 in 2027, to fully develop and evaluate the new component to be integrated with the education technology prototype or product over a period of 2 years and to prepare for commercialization. The result from Phase IB and the subsequent Phase II funding under this solicitation will be a novel education technology product. Three other 2026 ED/IES SBIR solicitations will be released on the same day as the Phase IB solicitation: The Phase IA program solicitation 91990026R0003 will request proposals for the development and evaluation of a prototype of an entirely novel education technology product (where no or limited previous development has occurred) over a period of 9 months. The goal of the Phase IA track is to solicit proposals for ground-breaking high-risk high reward approaches to solve pressing problems in education. The Direct to Phase II program solicitation #91990026R0005 will request proposals for the development of new education technology products to ready existing evidence-based innovations (e.g., products, interventions, tools) for commercial use at scale. Awards will be for $1,000,000 over a period of 2 years. The existing evidence-based innovation is required to have originally been conceptualized and developed by an academic researcher while at an academic institution or by a researcher at a non-profit education research organization. One or more of the academic researchers that originally created the innovation are required to participate in the project team. Projects that focus on advancing innovations that are not evidence-based will not be eligible for the Direct to Phase II program. Important Notes: Offerors will not be permitted to submit the same or similar proposals under the 2026 Phase IA, IB, Direct to Phase II or Phase II solicitations. Any duplicate or similar proposals that are submitted under more than one of these 2026 solicitations will be rejected without review. For more information and specifications, please refer to the Phase IA, Phase IB, Direct to Phase II or Phase II solicitations after release. About the ED/IES SBIR Program The purpose of the SBIR program is to stimulate technological innovation in the private sector, strengthen the role of small business in meeting Department research and development needs, increase the commercial potential of Department-supported research results, and improve the return on investment from Federally funded research for economic and social benefits to the Nation. ED/IES SBIR provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The ED/IES SBIR portfolio consists of research-based and commercially viable products that are widely deployed to address pressing needs in education. ED/IES SBIR is a highly competitive program – historically about 5 to 7% of submitted proposals resulted in a Phase I award, about 10% result in a Direct to Phase II award, and about 50% of Phase I awardees have won a Phase II award the following year. For more information about the ED/IES SBIR program, please see: www.ies.ed.gov/sbir Please note: the primary means of communication with Department personnel is via email. Please review the FAQ page to assist you in the preparation and submission of your proposal. FAQ page: https://ies.ed.gov/small-business-innovation-research-sbir/edies-sbir-frequently-asked-questions This notice is not a request for proposals at this time. Interested parties should continue to monitor this posting for updates.
-Pre-SolicitationOpen
The Institute of Education Sciences (IES) and the U.S. Department of Education (ED) anticipate the release of a 2026 Small Business Innovation Research Program (SBIR) Direct to Phase II solicitation #91990026R0005 on or about April 30, 2026. The proposal submission date will be in late June 2026, approximately 60 days after the solicitation release. The program, known as ED/IES SBIR, provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The ED/IES SBIR Direct to Phase II solicitation will invite proposals for existing evidence-based innovations for awards of $1,000,000 over 2 years for R&D and evaluation of new education technology or special education technology products to ready existing researcher-developed evidence-based innovations (products, interventions, practices) for use at scale, and to plan for commercialization. Projects that focus on advancing innovations that are not evidence-based will not be eligible for the Direct to Phase II program. The existing education innovation is required to have originally been created by researchers at either universities (or other academic institutions) or non-profit education research organizations. Proposals to advance education technology projects that were originated by small businesses are not eligible for the Direct to Phase II program. One or more of the members of the research team that originally created the innovation are required to be part of the project team in the SBIR proposal. Direct to Phase II projects are awarded without a prior Phase I award. Small Business firms and partners who possess strong research and development and evaluation capabilities for education technology products in the below priority area are encouraged to participate. PRIORITY AREA Direct to Phase II: Projects to Develop New Education Technology Products to Ready Existing Evidence-Based Innovations for Use at Scale in Education Settings, and to Plan for Commercialization Three other 2026 ED/IES SBIR solicitations will be released on the same day as the Direct to Phase II solicitation: The Phase IA program solicitation 91990026R0003 will request proposals for the development and evaluation of a prototype of an entirely novel education technology product (where no or limited previous development has occurred) over a period of 9 months. The goal of the Phase IA track is to solicit proposals for ground-breaking high-risk high reward approaches to solve pressing problems in education. The Phase IB program solicitation 91990026R0004 will request proposals for the development of a new component to be integrated with an existing education technology prototype or product. The existing prototype or product is required to be research-based. The resulting product from Phase IB and II funding under this solicitation will be a new version of an education technology product. The Phase II program solicitation #91990026R0006 will request proposals for the development of new education technology products to ready existing evidence-based innovations (e.g., products, interventions, tools) for commercial use at scale. This program solicitation invites eligible small business firms who received and successfully completed a 2025 Phase IA or IB SBIR award from ED/IES to submit a 2026 Phase II proposal. Awards will be for $1,000,000 over a period of 2 years. Projects that focus on advancing innovations that are not evidence-based will not be eligible for the Phase II program. Important Notes: Offerors will not be permitted to submit the same or similar proposals under the 2026 Phase IA, IB, Direct to Phase II or Phase II solicitations. Any duplicate or similar proposals that are submitted under more than one of these 2026 solicitations will be rejected without review. For more information and specifications, please refer to the Phase IA, Phase IB, Direct to Phase II or Phase II solicitations after release. About the ED/IES SBIR Program The purpose of the SBIR program is to stimulate technological innovation in the private sector, strengthen the role of small business in meeting Department research and development needs, increase the commercial potential of Department-supported research results, and improve the return on investment from Federally funded research for economic and social benefits to the Nation. ED/IES SBIR provides awards to eligible for-profit businesses and partners for the research and development and evaluation of new, commercially viable education technology products (“products”). The ED/IES SBIR portfolio consists of research-based and commercially viable products that are widely deployed to address pressing needs in education. ED/IES SBIR is a highly competitive program – historically about 5 to 7% of submitted proposals resulted in a Phase I award, about 10% result in a Direct to Phase II award, and about 50% of Phase I awardees have won a Phase II award the following year. For more information about the ED/IES SBIR program, please see: www.ies.ed.gov/sbir Please note: the primary means of communication with Department personnel is via email. Please review the FAQ page to assist you in the preparation and submission of your proposal. FAQ page: https://ies.ed.gov/small-business-innovation-research-sbir/edies-sbir-frequently-asked-questions This notice is not a request for proposals at this time. Interested parties should continue to monitor this posting for updates.
-Pre-SolicitationOpen
The purpose of amendment no. 6 is to respond to the following questions. Question-13. Are resumes and letters of support count towards the 20-page limit? Response-13. Yes, the limit is inclusive of all documents. Documents submitted outside that limit will not be reviewed. Question-14. Does MARAD anticipate establishing a deadline for proposer questions prior to the January 10, 2027 proposal closing date? Response-14. There is no deadline for proposer questions Question-15. Does MARAD have an anticipated timeframe for notification of successful applicants and execution of the resulting cooperative agreements? Response-15. Timelines vary, but generally successful applicants are notified within a month after selection, and the contracting process has begun Question-16. Where a proposal includes multiple organizations as part of the Design Team, does MARAD expect letters of commitment or other confirmation of participation from proposed team members at the proposal stage? If so, would these letters count toward the 20-page proposal limit? Response-16. MARAD does not expect letters of commitment. However, the assumption is that there is some level of commitment among the team members. Submissions are evaluated based on the team per the review criteria; therefore, the expectation is that the proposed team will be the project team, if selected. =============================================================================== The purpose of amendment no. 5 is to respond to the following question. Question-12. Could you please clarify whether the reference to fisheries vessels applies only to small fishing vessels or to all fishing vessels, including large commercial fishing vessels? Response-12. Fishing vessels, even large commercial vessels, fall outside the general purview of the Maritime Administration and thus are not the specific focus of this RFP. ===================================================================== The purpose of amendment no. 4 is to respond to the following question. Question-11. Would a U.S.-flagged, USCG-inspected passenger catamaran used for paid whale-watching trips fit the program? Response-11. Unfortunately, that type of vessel falls outside the purview of this project and generally outside the purview of the Maritime Administration. While there is no prohibition on submitting a proposal, it falls outside the preferred vessel types identified in the RFP. ====================================================================== The purpose of amendment no. 3 is to respond to the following questions. Question-9. Is MARAD primarily looking for design-stage studies in which fuel efficiency and URN are predicted through fluid dynamic modeling? Response-9. Yes. The goal is to demonstrate, through modeling, the benefits that can be realized through a systematic design approach integrating technologies with input from naval architects, shipyards, and technology suppliers on the efficacy of these approaches. There is no limitation on the type of modeling - approaches should be used as needed. Question-10. Is there any room for measurements within the Challenge? Response-10. This is a design stage challenge and does not include an expectation of direct measurement. ================================================== The purpose of amendment no. 2 is to respond to the following questions. Question-4. Is MARAD open to all forms of propulsion to gain fuel efficiencies - for example, hybrid diesel-electric equipment with electric motors and batteries? Response-4. There are no limits or specific requirements for the type of propulsion or fuel. Technologies, including fuels and propulsion, should be centered around performance and demonstrating the feasibility and economic achievability of these combined approaches and should be dictated by capacity needs set by industry requirements (tug capacity, crew capacity, operations support, range, TEU, cargo etc.). Designs should note specifically the technology readiness level and the commercial availability of any technologies used. Question-5. Under the Eligibility Information section of the subject notice, it states that the opportunity is "open to all types of domestic applicants other than individuals." In reviewing the statutory definition of a “domestic source” under 50 U.S.C. § 4555(7), “the term “domestic source” means a business concern— (A) that performs in the United States or Canada substantially all of the research and development, engineering, manufacturing, and production activities required of such business concern under a contract with the United States relating to a critical component or a critical technology item.” Based on this definition, which appears to include qualifying Canadian businesses as domestic sources for certain USG Response-5. For the purposes of this RFP a domestic applicant is considered to be a contractor organized or existing under the laws of the United States. Keep in mind that the RFP states preference will be given to proposals with team leads represented by U.S. companies, those with U.S. headquarters, and those operating under the U.S. flag; the RFP does not exclude those with team leads or team members outside the U.S. " Question-6. Confidentiality of design information: Our understanding is that the final report and presentation will be publicly shared, while sensitive supporting information, such as calculations, design plans and drawings, modeling results, technology details, and cost information, can be provided to MARAD without being made public. The terms and conditions, however, grant MARAD broad rights to reproduce, distribute, and display project materials. Could you clarify whether sensitive design information submitted during the project can be designated and maintained as confidential, and whether MARAD’s rights to distribute it would be limited? Response-6. Confidential business information or sensitive design information will not be shared publicly without permission. Prior to publication, MARAD and the project team will discuss the extent and limits of the information that will be shared. Question-7. Subcontracting limits: Are there any restrictions on the value or proportion of work that may be subcontracted to organizations outside the named project team, such as model testing facilities or noise specialists? Response-7. The proposed project team should include all intended team members including those that would be subcontracted such as testing facilities or noise specialists. The specifics of subcontract awards are not determined by the MARAD project manager. Question-8. Work outside the United States: May project funds be used to subcontract specialized work outside the United States? If so, are there limits on the type or value of that work? Response-8. The proposed project team should include all proposed team members. Preference will be given to those team leads represented by U.S. companies, those with U.S. headquarters, and those operating under the U.S. flag. There is no specific requirement for subcontractors. ========================================================= The purpose for this amendment is to respond to the following questions: Question-1. Domestic Applicant Definition: Section D.1 of the RFP states the Challenge is "open to all types of domestic applicants other than individuals." Our company is a U.S.-registered entity, though its ultimate parents are in Canada and Europe. Could you confirm whether an entity with this ownership structure qualifies as a "domestic applicant" for purposes of serving as the lead applicant/Recipient of a cooperative agreement under this RFP? Response-1. For the purposes of this project, a U.S. registered entity will be evaluated as a domestic applicant. Question-2. Citizenship-Based Funding Restriction: We understand that MARAD/META cooperative agreements may include a restriction on using award funds for "work to be done or done in a facility owned by someone other than a Citizen of the United States (as defined in 46 C.F.R. § 315.3(b))." Could you confirm whether this restriction, or an equivalent, will apply to cooperative agreements resulting from this RFP, and if so, how it would apply to a design team whose naval architecture/engineering firm is U.S.-registered and performs all work domestically, but has foreign parent ownership? Response-2. For the purposes of this project, a design team located in the U.S. working at a U.S.-registered firm and performing all work domestically would not fall under the restriction. Question-3. Team Lead Eligibility vs. Preference: Section B notes a preference for "team leads represented by U.S. companies, those with U.S. headquarters, and those operating under the U.S. flag." Could you confirm whether this operates solely as an evaluative preference, or whether it functions as a disqualifying eligibility criterion for a team lead whose ultimate parent is a foreign entity? Response-3. The preference for "team leads represented by U.S. companies, those with U.S. headquarters, and those operating under the U.S. flag" is an evaluative preference. A U.S. registered entity with U.S. offices and staff performing work domestically, would fall under consideration as a domestic applicant for this project. ======================================================================= U.S. Maritime Administration (MARAD) A Study on Vessel Design Challenge RFP No. 693JF726R000016 REQUEST FOR PROPOSALS (RFP): The Maritime Administration’s (MARAD) Maritime Environmental and Technical Assistance (META) program is issuing a request for proposals (RFP) for a Vessel Design Challenge (Challenge). This Challenge intends to fund multiple design teams willing to undertake integrated design work to improve fuel efficiency and reduce vessel underwater radiated noise (URN) to create the next generation of U.S. vessels. Individual awards depend on number of designs proposed for the package. Awards are intended to be for not less than $150k and likely not more than $450k. Project completion timeline is 12-18 months. Total funding available is up to $1.25 million. PROGRAM DESCRIPTION: The META program (46 U.S.C. § 50307) is investigating the interconnections between broader fuel efficiency, reducing URN from vessels, and exploring potential co-benefits. It is the policy of the United States to revitalize and rebuild domestic maritime industries and workforce to promote national security and economic prosperity. Accomplishing this requires making United States-flagged and built vessels commercially competitive in international commerce, rebuilding America’s maritime manufacturing capabilities, and expanding and strengthening the recruitment, training, and retention of the relevant workforce. The most promising opportunities for optimizing fuel efficiency gains and achieving URN reductions are in the early ship design stage, using a systems approach. This requires intentional and integrated ship designs that prioritize fuel efficiency while simultaneously reducing URN. Advanced fluid dynamic modeling enables comparison among hull, engine, and propeller design and arrangement, providing valuable information to the industry about the return on investment (ROI) for various technology and design optimizations at the design phase. Individual technologies claim to provide efficiency and noise reduction benefits, but the additive cost-savings have not been quantified for applying technologies in series and demonstrating increased efficiencies across multiple areas. Recently published studies summarized the state of knowledge and availability of technologies that can be applied to vessels to improve energy efficiency while reducing vessel generated URN. Those reports crosswalk not only the interoperability of technologies and design elements, but the potential reductions, costs, and return on investment. The next phase is to demonstrate, through modeling, the benefits that can be realized through a systematic design approach integrating technologies with input from naval architects, shipyards, and technology suppliers on the efficacy of these approaches. By using this approach, Teams will begin at the drawing table to quantify the benefits of innovative technology integration into the design phase for application on new vessels. The Vessel Design Challenge is intended to facilitate the demonstration of novel vessel designs that meet or exceed international benchmarks for fuel efficiency and URN source levels. This Challenge is intended to fund multiple Design Teams willing to undertake this kind of integrated design work to create the next generation of U.S. vessels. PROPOSAL CONTENT Proposed Vessel Design: Design proposals can include: Existing projects that would be redesigned, Forthcoming projects that are just beginning the design specification phase, and Designs that are theoretical or more experimental which aim to create a new approach or design. There are no restrictions on eligible vessels, however, given the mission of the Maritime Administration, vessels should be commercially useful and generally would not include small watercraft, recreational vessels, or fisheries vessels. Eligible designs include vessels operating in coastal or inland waterways as well as the Great Lakes. Ideal proposals will be for new design approaches or design modifications that couple hull-machinery-propulsion approaches to maximize fuel efficiency, URN reduction, and ROI. Technologies should be centered around performance and demonstrating the feasibility and economic achievability of these combined approaches and should be dictated by capacity needs set by industry requirements (tug capacity, crew capacity, operations support, range, TEU, cargo etc.). Designs should note specifically the technology readiness level and the commercial availability of any technologies used. Design Team: The approach to the Challenge will include a design team. Teams should include description of partnerships, collaborations, and/or processes that will ensure success of the proposal. Further, proposals should identify the Team’s capabilities, related experience, techniques, or unique combinations of these that are integral factors for achieving the Challenge objectives to include experience that supports ability to successfully manage and achieve project goals and objectives of similar type and scope. Development of an ideal team should represent the concept of a design-build approach and include: Naval architect(s) Marine Engineer(s) Shipyard(s) Owner/operator/buyer (can be more than one) Technology provider(s) (including fuel supplier, as needed) May include operator/charter party, BCO, logistics partners, port/city/public entity, private financing partner. Teams may submit one or more vessel designs to the Challenge. Funding amounts will be based on: the number of vessel designs proposed their technology innovation, or a combination thereof One or all proposed designs may be funded depending on proposals. There is no limit to number of teams an organization can participate in, however, an organization may only “lead” one team/proposal. No identical teams with rotating “leads” will be permitted. Preference will be given to proposals with team leads represented by U.S. companies, those with U.S. headquarters, and those operating under the U.S. flag Methods: Proposals must include a detailed description of the design and modeling approaches that will be used to meet the Design Challenge Parameters as noted below, including those for fuel burn estimates and URN source level as well as modeling for return on investment and similar economic estimates and valuations. Timeline: The proposed plan should include the expected timeline (not to exceed 18 months) inclusive of kick off meetings with MARAD, design and technology integration and assessment, interim progress report detailing vessel design and technology application progress, data collection and analysis, and final report deliverables. Budget: All proposals must include a compete, detailed, and justifiable budget with general line items for various design components and stages including fuel, URN, and ROI evaluation and calculations. Budgets should demonstrate market conditions or similar that support these budget estimates. Description of key personnel, qualifications, and expected level of effort should also be included. Proposals may also include any additional considerations, outreach, or analysis recommended to achieve the goals of the project. Design Challenge Parameters Design specifications: The objective is for designs to meet or exceed these specifications for fuel efficiency improvement and noise reduction. Recognizing that this is a demonstration of technical feasibility and economic achievability, if these design specifications are not achievable, alternative efficiency and noise improvements should be documented demonstrating the current limits of technologies. These specifications should be considered aspirational to test the limits of the possible within the bounds of the practical. Energy Efficiency: 30% efficiency improvement over a typical vessel design with conventional hull and machinery arrangements and fuels. Underwater Radiated Noise Source Level: Underwater radiated noise source level is defined using the radiated noise level (RNL). RNL is the source level that has been calculated assuming sound pressure decays geometrically with distance from the source, with no influence of the sea-surface or seabed and is often used to quantify source levels of vessels. Below are the equations for URN limits for self-propelled commercial vessels. The limits are stated in decidecade band RNL (dB re 1 μPa2·m2). Frequency range / Hz Transit / dB re 1 µPa2·m2 10-100 169.5+1.5log10(f) 100-1000 191-9.5log10(f) 1000-50000 199-12log10(f) Operational Conditions: Vessels designs should be able to meet or exceed the specifications under what would be considered normal operational parameters for that vessel. The intent is not for these vessels to need to employ special operations or change their normal patterns, routes, or timetables to achieve the reductions. Normal operations should be considered: Typical transit/operating conditions Transit non-working; and working for under-tow/station keeping 85% maximum continuous rating Measurement Standard: ANSI/ISO standards or an appropriate and defensible adaptation of these to suit the needs and conditions of the operational state should be described. Fuel efficiency estimation methods should be described based on industry and/or international reporting requirements (e.g. Class society, IMO) Deliverables The main deliverable is a preliminary vessel design that includes some technical details including the hull form for hydrodynamics and fuel efficiency and the selection of propulsion and power systems (engines, propellers, and other machinery) based on the ship’s operational requirements and sufficient to meet the design specifications of the Challenge. Designs should also be validated for general stability and load analyses for the ship’s safety under various conditions. Design analysis should include the technology combinations, design adjustments, machinery and propulsion arrangements that achieve desired efficiency and URN specifications. Designs should note the technology readiness level and the commercial availability of any technologies used. Each design must include a full breakdown of the anticipated costs compared to a conventional design, including an anticipated ROI timeline and total ROI for the anticipated lifetime of the vessel. This should include a description of the additional costs for each technology element and the design and anticipated construction costs. There is no preferred technology or fuel/engine approach, but final reports should describe in reasonable detail those arrangements and technology combinations used to achieve the specifications. Since this is a concept demonstration for feasibility and economic achievability, challenges and barriers to meeting design specifications should be explicitly described. This should include findings regarding cost differences in achieving partial reductions; for example, the difference in cost between reducing fuel consumption increased rapidly after a certain point or the achievability of URN reduction became exponentially more expensive after a specific dB reduction. It should also include barriers to technology sourcing or availability and the realities of potentially building these vessels in the shipyard, i.e. does the experience exist at U.S. yards to integrate the design technologies and arrangements? These design components, technology and cost evaluations, and lessons learned should be included in a final report that can be made publicly available. Any intellectual property or business sensitive information, to include design plans and/or drawings, results of modeling, or technology or cost specifics will remain internal to the project team and Maritime Administration as not to undermine any competitive advantage. The final deliverable is participation in a debrief with MARAD to share results and lessons learned. There may be opportunities to debrief with other Challenge teams, pending willingness and interest to do so. FEDERAL AWARD INFORMATION: MARAD will provide funding through a cooperative agreement for the execution of this Design Challenge. This announcement is an expression of interest only and does not commit MARAD to make any award. To be considered for selection, the contractor participating in the Challenge must be able to complete it within 18 months from time of award. The final report and other summary materials will be publicly available and posted to the META webpage. Proposals in response to this RFP are limited to 20 pages and must be received within 120 days of the publication of this notice. Proposals will be screened for use of Artificial Intelligence (AI) tools. Any use of AI tools in generating content for the proposal must be clearly identified and justified. MARAD reserves the right to fund one or none of the proposals received under this RFP. MARAD is not responsible for reimbursing the costs that applicants incur to prepare and submit their proposals in response to this RFP. Technical and cost proposals (or any other material) submitted in response to this RFP will not be returned. It is MARAD’s policy to treat all proposals submitted under this RFP as sensitive competitive information and to disclose their contents only for the purposes of evaluation. All applicants must be registered and current with SAM.gov at the time of award. ELIGIBILITY INFORMATION. 1. Eligible Applicants: Open to all types of domestic applicants other than individuals. 2. MARAD is seeking to provide full funding through cooperative agreement for the proposals that provides sufficient, verifiable, and detailed data on how to reach the objective of this Design Challenge. MARAD will fund 100% of the total cost of the project. Proposals must include a detailed cost breakdown that shows how Federal funds will be used for the project. Please see Section E.2 for information on proposal format requirements. 3. Systems for Award Management (SAM) Requirements. MARAD will not make an award to an applicant until the applicant has complied with all applicable unique entity identifier and SAM requirements. If an applicant has not fully complied with the requirements by the time MARAD is ready to make an award, MARAD may determine that the applicant is not qualified to receive an award and use that determination as a basis for making an award to another applicant. Please see Section E.3 for information on SAM requirements. MARAD will not make an award to any applicant with an exclusion in SAM. APPLICATION AND SUBMISSION INFORMATION Address to Request Application Package. This RFP contains all the information needed to submit a proposal and be considered for award. No specific application form or other materials need to be obtained from MARAD. Content and Form of Application. Proposals are limited to 20 pages and must be received within 120 days of the publication of this notice. Proposals must provide sufficient, verifiable, and detailed information covering all elements of the “Proposal Content” described in section B.1 above. Unique Entity Identifier and System for Award Management (SAM). Each applicant is required to: (a) be registered and current in SAM before submitting its application; (b) provide a valid unique entity identifier in its applicant; and (c) continue to maintain an active SAM registration with current information at all times during which it has an active Federal award or an application or plan under consideration by a Federal awarding agency. MARAD will not make an award to an applicant until the applicant has complied with all applicable unique entity identifier and SAM requirements. If an applicant has not fully complied with the requirements by the time MARAD is ready to make an award, MARAD may determine that the applicant is not qualified to receive an award and use that determination as a basis for making an award to another applicant. Submission Dates and Times. The deadline for proposal submission is 12:00 PM EST on the closing date listed for this RFP on SAMS.gov Please submit proposals in PDF format attached to an email. Send proposals to Christian Onwudiegwu/Contract Specialist at Christian.onwudiegwu@dot.gov and Kelly Mitchell-Carroll at K.mitchell-carroll@dot.gov, Office of Acquisitions. Do not send paper copies, or other media of the proposal via post office or delivery service. Proposals received by MARAD after the deadline will not be considered for award. An email will be deemed “received” by MARAD on the date and time the email was “sent” to the email address in Section E.7, below, as determined by MARAD’s servers. Intergovernmental Review. This funding opportunity is not subject to Executive Order 12372, “Intergovernmental Review of Federal Programs.” l Funding Restrictions. Applicants are advised to review 2 CFR Part 200, Uniform Administrative Requirements, Cost Principles and Audit Requirements for Federal Awards as supplemented by 2 CFR Part 1201 for cost principles used to determine allowable costs of work performed under Federal awards. Other Submission Requirements. Proposals must be submitted by the deadline set forth in Section E.4 above by electronic mail to Christian Onwudiegwu at Christian.onwudiegwu@dot.gov and Kelly Mitchell-Carroll at K.mitchell-carroll@dot.gov. Please include the Funding Opportunity Number and Title in the Subject Line. APPLICATION REVIEW INFORMATION Review and Selection Process. MARAD will set up an internal review team to evaluate all proposals that are submitted under this announcement. All eligible proposals will be evaluated within four weeks after the closing date. If the review team has any questions on an individual proposal, it will notify the applicant for clarification. The proposals will be evaluated against the following criteria: Well-documented and context-appropriate plan to undertake and successfully demonstrate the design integration of technology to achieve the fuel efficiency goal, URN limit, and economic analysis required by the Challenge. Clear application of methods supporting vessel design, technology integration, data collection, assessment, and analysis to include specifications for fuel efficiency and URN modeling consistent with international and class standards and reference to existing guidelines, standards, and notations. Methodologies must include descriptions of major analytical approaches being proposed for the Challenge components to meet the Design Challenge Parameters. Methodology also includes any specific models and data sources intended to be used for each component of the Challenge. The Team’s capabilities, related experience, technical knowledge, techniques, or unique combinations of these that are integral factors for achieving the Challenge objectives to include experience that supports ability to successfully manage and achieve Challenge goals and objectives of similar type and scope. Detailed project timeline with descriptions of key decision points and areas of uncertainty. Budget and justification demonstrating appropriate and defensible cost per component, personnel, timeline, and final deliverables; including consideration of the experience and capability of key personnel involved, the number of hours budgeted for key people, and the role, value, and level of participation of any noted partners. FEDERAL AWARD ADMINISTRATION INFORMATION Federal Award Notices. The successful applicant(s) will be notified by MARAD’s Office of Acquisition via telephone; however, the telephone call is not the actual award or the authorization to begin performance. All awards will be made by a cooperative agreement signed by MARAD’s Agreement/Grants Officer. After an award has been made, a representative from the MARAD’s Office of Innovation will schedule a kick-off meeting for the project. Unsuccessful applicants will be notified via email. Administrative and National Policy Requirements. Applicants are advised to review 2 CFR Part 200, Uniform Administrative Requirements, Costs Principles and Audit Requirements for Federal Awards as supplemented by 2 CFR Part 1201, for applicable administrative and national policy requirements. For a copy of the general terms and conditions of the Federal award made under this RFP, please contact Christian Onwudiegwu at christian.onwudiegwu@dot.gov. Federal awards made under RFP may include additional terms that are specific to the project, including without limitation awardee information, project description, funding details, and appropriate data rights clauses. Reporting. Applicants are advised to review 2 CFR Part 200, Uniform Administrative Requirements, Costs Principles, and Audit Requirements for Federal Awards, as supplemented by 2 CFR Part 1201, for applicable reporting requirements. Federal awards made under this RFP may include additional reporting requirements that are appropriate for the specific project to be funded by MARAD. FEDERAL AWARDING AGENCY CONTACT For any questions relating to the technical or programmatic aspects of this RFP, please contact Alyson Azzara at Alyson.Azzara@dot.gov. For any questions about the administration of this funding opportunity and any awards, please contact Christian Onwudiegwu at Christian.onwudiegwu@dot.gov. cc: Kelly Mitchell-Carroll at K.mitchell-carroll@dot.gov. OTHER INFORMATION Applicants must identify all proprietary information in its submission. MARAD is not obligated to make any Federal award as a result of this RFP.
-Solicitation01/10/2027
Enclosed is a Request for Quotations (RFQ) for Research study on unfair labor practices. If you would like to submit quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter. The U.S. Government intends to award a contract/ to the responsible company submitting an acceptable offer at the lowest price. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. The Embassy intends to conduct a pre-quotation conference at the site, The pre-proposal conference will be held on November 30, 2026 at 9:00 at the US Embassy Bogota. Prospective offerors/quoters should send the names and ID number of their representatives (max 2 per company) by COB November 20. 2026 for additional information or to arrange entry to the building. Questions are due on COB December 4, 2026. Quotations are due by December 10, 2026 at 16:00hours. No quotations will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted. Your quotation must be submitted electronically to BogotaGSOcompras@state.gov. It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed the 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. In order for a quotation to be considered, you must also complete and submit the following: 1. SF-1449 2. Section I, Pricing 3. Section 5 Representations and Certifications 4. Additional information as required in Section 3 5. The Offeror should submit a completed IRS Form W-14, found at www.irs.gov/w14, to ensure compliance with FAR 52.229-11;”] 6. Proof of SAM Registration Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.
-Solicitation12/10/2026

Additional Details

Solicitation Number

ED-IES-12-R-0081

Archive Date

Jan 9, 2014