GovChime
Notice ID: f269a1eec57f4b4b8bc7c7e0f0b32608Combined Synopsis/Solicitation

MOGAS Platform Parts

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
12:15 PM EST
Posted
November 18, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSEA.REGIONAL MAINTENANCE CENTER.MID ATLANTIC REG MAINT CTR
Last updated
Nov 18, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N5005427Q0022
Notice ID
f269a1eec57f4b4b8bc7c7e0f0b32608

Description

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation will be posted to the System for Award Management at https://sam.gov/ and/or Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. The RFQ number is N5005427Q0022. This solicitation documents and incorporates provisions and clauses in effect though FAC 2026-01 and the DFARS Change notice 20260507. The Mid-Atlantic Regional Maintenance Center (MARMC) requests responses from qualified sources capable of providing the Platform Equipment that are identified in the attached Statement of Work (SOW). All parts shall be new. No refurbished or used parts will be accepted.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/Solicitation

    MOGAS Platform Parts

    Notice 5b82c03879d649e0a0dfdf031b2c7c5c on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationCurrent

    MOGAS Platform Parts

    Notice f269a1eec57f4b4b8bc7c7e0f0b32608 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This Sources Sought notice is being issued by the Naval Surface Warfare Center, Philadelphia Division (NSWCPD), on behalf of the NSWCPD Division 45. The Government is seeking information regarding the procurement of a maximum of twenty (20) Electrical Hull Penetrators (EHP). Specifications are listed in the attached Sources Sought Notice. SUBMISSION OF RESPONSES: Respondents shall provide capability statements with specific information regarding their ability to provide the required materials (described in the Sources Sought Attachment) to meet Division 45 needs. NSWCPD will only accept unclassified, electronic submissions. Responses shall be submitted via email to christopher.m.mccarthy26.civ@us.navy.mil by 16:30 EST, 20 November 2026. Responses shall list N64498-RFPREQ-PD-45-0176 in the subject line. No phone calls shall be accepted. Government WILL NOT PAY for any information received, and the Government will not compensate the respondent for any cost incurred in developing the response to this notice. The Government will not release any information marked with a proprietary legend received in response to this notice to any firms, agencies or individuals outside the Government without written permission in accordance with the legend. Please be advised that all submissions become Government property and will not be returned. This is a follow up Sources Sought Notice to an Industry Day Virtual Event held on 27 October 2026. During that event the following questions were asked. Below each question is the answer to said question. Question #1: Is this 10/27 conference a virtual event via a web link or on site at Naval Surface Warfare Center Philadelphia Division (NSWCPD)? Answer #1: This event will take place on Microsoft TEAMs. You need to register on Eventbrite to access the link. Question #2: For this PRE-SOL for Columbia Class BST-1 Electrical Hull Penetrators and Transmitter Cable Assemblies, do cable assembly manufacturers need to have SUBSAFE Level 1 or 2 certification for doing hull penetrator work? Answer #2: The Electric Hull Penetrators (EHP) is Level I material within the SUBSAFE boundary and any vendor does not need to be in NAVSEA Note5000. Question #3: I looked again at the link and there are no answers or questions posted let alone a specific statement about SubSafe Level 1 or 2. It does mention “ in accordance with applicable documents in Section 2.0 and the Statement of Work” but there is no such documents on the link. Answer #3: Again to Confirm, The Electric Hull Penetrators (EHP) is Level I material within the SUBSAFE boundary and any vendor does not need to be in NAVSEA Note5000. As for the Section 2.0 Documents and Statement of Work, those have not been provided to any vendors at this time. They will be provided at the time the official Request for Proposal (RFP) goes out. The anticipated date that the RFP goes out has not been determined yet. Question #4: We would request that the solicitation be issued as full and open given the NAICS code stated. Answer #4: Our team is still evaluating whether competing the contract as full and open or set aside is the best path forward. Question #5: Previously a vendor has been shown specifications for a cable used on BST-1 (BST-1 CABLE REQUIREMENTS PER 1197262 (PC 19). Is the cable still a 2SWF-2 (Modified) and if so, is a neoprene outer jacket still mandatory? Answer #5: The cable is still required to be LS2SWU-12 which includes a polyolefin outer jacket. Additionally, this cable will require exterior armor for EMI protection. Question #6: Question for you regarding Welding NDT. Do you need us to complete the Shipbuilder's LVL3 NDT? Answer #6: Personnel qualified to LVL 2 are permitted to perform the weld NDT, the NDT inspection must be approved by LVL 3 qualified personnel. Question #7: For the section where the pressure proof caps go on, are those welded to the main body and require a QQ-N-286 weld procedure? Does NSWC-PD need to certify this weld procedure? Answer #7: Yes, the 4 receptacles are welded to the main body. The weld type is monel QQ-N-281 to k-monel QQ-N-286. For additional guidance on performing the weld, please refer to the latest revision of NAVSEA Tech Publication 278. The procedure developed using the guidance in 278 requires NSWCPD approval. NSWCPD would be looking for the vendor to submit their weld procedure specification (WPS), product quality report (PQR), and welder qualifications for approval. Attached to this Sources Sought Notice are Two Documents: A Breakdown of the sources sought notice in a word document and what is being requested with this notice A distributable guidance that helps give newcomers an initial roadmap to preparing to support work producing Level I material. An updated slideshow from the Industry Day Event with the questions asked and said answers during and immediately after the event. THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A TASK ORDER AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE IS STRICTLY VOLUNTARY.
65%
Market Research11/20/2026
The contractor shall fabricate, conduct certification testing, and deliver material components for the Cable Cutter and Reeling Machine Assembly. All material components are LEVEL I Material and/or Material to be installed in a SUBSAFE Boundary. The purpose of this amendment is to 1. Amend the page limits on the table in section L.3 2. Delete the table footer language: The entire Technical proposal (excluding cost or otherwise noted) shall not exceed twenty(20) pages in length. 3. Extend the due date to 12 March 2026.All other terms and conditions remain unchanged.
65%
Solicitation03/12/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.2 (Overhaul), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This enclosure is an addendum to FAR provision 52.212-1, Instructions to Offerors ? Commercial Products and Commercial Services, which applies to this acquisition. Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-26-Q-6247. The North American Industry Classification System (NAICS) code applicable to this acquisition is 332999, All Other Miscellaneous Fabricated Metal Product Manufacturing and the small business size standard is 750 employees. This procurement is a Total Small Business Set-Aside. Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a non-Small Business Concern will not be considered for award.NOTE: This order has a DPAS rating of DX-C9.DESCRIPTION OF REQUIREMENTSThe Government is seeking to acquire Custom Fabricated Buoy Parts. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed below. The Government will not consider quotes or offers for partial items or quantities. See RFQ Attachment ?C1.5 ATTACHMENT (01) ITEM LIST for the full list of required custom fabricated parts. The expected delivery date is NLT 15 December 2026. The Government is seeking Free on Board (FOB) Destination pricing to the following shipping address: San Diego, CA 92110 (full address will be disclosed at award).
60%
Combined Synopsis07/31/2026
*Amendment 0001 The purpose of Amendment 0001 is to correct a clerical error in an already-existing line item, as well as to add a new line item to the Statement of Work.* This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation will be posted to the System for Award Management at https://sam.gov/ and/or Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. The RFQ number is N5005427Q0020. This solicitation documents and incorporates provisions and clauses in effect though FAC 2026-01 and the DFARS Change notice 20260507. The Mid-Atlantic Regional Maintenance Center (MARMC) requests responses from qualified sources capable of providing the Ships Service Diesel Generator (SSDG) Exhuast Bellows parts that are identified in the attached Statement of Work (SOW). All parts shall be new. No refurbished or used parts will be accepted.
47%
Combined Synopsis11/25/2026
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation will be posted to the System for Award Management at https://sam.gov/ and/or Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. The RFQ number is N5005427Q0019. This solicitation documents and incorporates provisions and clauses in effect though FAC 2026-01 and the DFARS Change notice 20260507. The Mid-Atlantic Regional Maintenance Center (MARMC) requests responses from qualified sources capable of providing the 2A Gas Turbine Module Flow Liner parts that are identified in the attached Statement of Work (SOW). All parts shall be new. No refurbished or used parts will be accepted.
47%
Combined Synopsis11/10/2026

Additional Details

Solicitation Number

N5005427Q0022

Archive Date

Dec 11, 2026

Office Address

NORFOLK, VA, 23511-2124