GovChime
Notice ID: 8bbcacbfcf8746d1ad12be6238085ee7PresolicitationArchived

Explosion Proof HEPA Vacuums

Archived on May 10, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM CDT
Posted
April 24, 2025
Notice type
Presolicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333413: Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA8125 AFSC PZIMA
Place of performance
Tinker AFB
Last updated
Nov 15, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
F3YCEB5105A103
Notice ID
8bbcacbfcf8746d1ad12be6238085ee7

Description

** THIS IS A PRE-SOLICITATION NOTICE. NO QUOTES WILL BE ACCEPTED UNTIL THE REQUEST FOR QUOTE (RFQ) IS POSTED. ** The Air Force and 76 AMXG intends to solicit a request the purchase of Explosion Proof Electric HEPA Vacuums and accessories meeting the following specifications: 1. Two Models of Explosion Proof Electric HEPA vacuum 1.1. Four (4) each for Model 1. Model 1 shall have the following specifications: 1.1.1. Shall be third party certified Explosion Proof for operation in Class 1 Division 1 Group D environments 1.1.2. Shall operate on 460 volt 60 hertz, 3 phase alternating current power and be compatible with explosion proof connector. All vacuum models shall have Appleton ACP3034BC plugs on the electrical supply cords. 1.1.3. Shall have vacuum provided by a Totally Enclosed Fan Cooled electric motor with no less than 1.8 horsepower and no more than 2.2 horsepower 1.1.4. Shall be able to generate a vacuum flow rate no less than 150 cubic feet of air per minute and no more than 165 cubic feet of air per minute 1.1.5. Shall be capable of generating a vacuum no less than 128 inches of water and no greater than 132 inches of water 1.1.6. Shall be equipped with a vacuum relief valve that opens at a vacuum no less than 78 inches of water and no more than 82 inches of water 1.1.7. Shall not produce more than 74 decibels of noise 1.1.8. Shall be mounted on a wheeled cart with a detachable tank 1.1.9. Shall be equipped with a manual filter shaker 1.1.10. Shall have a dust recovery tank with a volume no less than 14 gallons and no more than 15 gallons 1.1.11. Shall have a length no less than 38 inches and no more than 42 inches 1.1.12. Shall have a width no less than 22 inches and no more than 26 inches 1.1.13. Shall have a height of no less than 45 inches and no more than 49 inches 1.1.14. Shall have a weight no more than 260 lb 1.1.15. Shall have a power cord with a minimum length of 100 feet 1.2. Four (4) each for Model 2. Model 2 shall have the following specifications: 1.2.1. Shall be third party certified Explosion Proof for operation in Class 1 Division 1 Group D environments 1.2.2. Shall operate on 460 volt 60 hertz, 3 phase alternating current power and be compatible with explosion proof connector. All vacuum models shall have Appleton ACP3034BC plugs on the electrical supply cords. 1.2.3. Shall have vacuum provided by a Totally Enclosed Fan Cooled electric motor with no less than 4.8 horsepower and no more than 5.2 horsepower 1.2.4. Shall be able to generate a vacuum flow rate no less than 220 cubic feet of air per minute and no more than 230 cubic feet of air per minute 1.2.5. Shall be capable of generating a vacuum no less than 150 inches of water and no greater than 160 inches of water 1.2.6. Shall be equipped with a vacuum relief valve that opens at a vacuum no less than 98 inches of water and no more than 102 inches of water 1.2.7. Shall not produce more than 74 decibels of noise 1.2.8. Shall be mounted on a wheeled cart with a detachable tank 1.2.9. Shall be equipped with a manual filter shaker 1.2.10. Shall have a dust recovery tank with a volume no less than 14 gallons and no more than 15 gallons 1.2.11. Shall have a length no less than 38 inches and no more than 42 inches 1.2.12. Shall have a width no less than 22 inches and no more than 26 inches 1.2.13. Shall have a height of no less than 45 inches and no more than 49 inches 1.2.14. Shall have a weight no more than 260 lb 2. Eight (8) (4 for model 1 & 4 for model 2) Aluminum or Stainless Hose-to-Vacuum (Wye) Connection 2.1. Shall allow multiple 1.5 vacuum hoses to connect to the primary suction inlet of the vacuum 2.2. Shall have a minimum of two 1.5 outside diameter male hose barb outlets 2.3. Shall be statically conductive 2.4. Shall have a securely attached isolation system (such as spring-loaded flaps, tethered plugs, etc.) for covering inactive hose barb outlets that facilitate the use of as few as one vacuum hose. 3. Eight (8) (4 for model 1 & 4 for model 2) Suction /Air Hose 50 Length 3.1. Air hose shall be comprised of 50 of 3/8 diameter air hose rated for use with compressed air at 100 psi 3.2. Suction hose shall be comprised of 45 of 1.5 diameter crush-resistant vacuum hose and 5 of 1.0 diameter crush-resistant vacuum hose 3.3. Shall be fitted with one 1.5 pressure fit female coupling on the end of the 1.5 diameter portion of the suction hose 3.4. Shall be fitted with one 1.0 pressure fit female coupling on the end of the 1.0 diameter portion of the suction hose 3.5. Suction hose shall be statically conductive 3.6. Air hose and suction hose shall be secured to each other throughout the length of the combined hose. 3.7. Air hose and suction hoses shall have sufficient separation at both the 1.5 diameter end and the 1.0 diameter end to facilitate air and vacuum connections to the vacuum, sander, and facility compressed air hose 4. Eight (8) (4 for model 1 & 4 for model 2) Suction/Air Hose 20 Length 4.1. Air hose shall be comprised of 20 of 3/8 diameter air hose rated for use with compressed air at 100 psi 4.2. Suction hose shall be comprised of 15 of 1.5 diameter crush-resistant vacuum hose and 5 of 1.0 diameter crush-resistant vacuum hose 4.3. Shall be fitted with one 1.5 pressure fit female coupling on the end of the 1.5 diameter portion of the suction hose 4.4. Shall be fitted with one 1.0 pressure fit female coupling on the end of the 1.0 diameter portion of the suction hose 4.5. Suction hose shall be statically conductive 4.6. Air hose and suction hose shall be secured to each other throughout the length of the combined hose. 4.7. Air hose and suction hoses shall have sufficient separation at both the 1.5 diameter end and the 1.0 diameter end to facilitate air and vacuum connections to the vacuum, sander, and facility compressed air hose 5. Sixteen (16) (8 for model 1 & 8 for model 2) Stainless Steel Wye Connector 5.1. Shall have three pressure fit connections of 1.5 outside diameter each 5.2. Shall be constructed from stainless steel 5.3. Shall have a securely attached (by means of a cable or chain) plug that may be inserted into one of the two 1.5 outside diameter male hose barb outlets to facilitate use of only one vacuum hose 6. Three (3) printed copies of manuals for all equipment 7. Electronic copies of manuals for all equipment 8. Spare parts list for common consumables 9. Virtual (Microsoft TEAMs) or In-person training (performed on-site at Tinker AFB) on operation of vacuums for up to 60 personnel. Training shall cover basic operations and changing of consumables for each model of vacuum. 10. Delivery shall be on or before 31 August 2025. Staggard shipments are approved. A Firm Fixed Price type contract is contemplated. This will be 100% small business set-aside. NAICS 333413; Size Standard 500 Employees System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://sam.gov/content/home.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Tran Tran, PCO

Documents

No documents available.

Lifecycle

  1. 4
    Version 4PresolicitationArchivedCurrent

    Explosion Proof HEPA Vacuums

    Notice 8bbcacbfcf8746d1ad12be6238085ee7 on SAM.gov

  2. 6
    Version 6SolicitationArchived

    Type changed from Presolicitation to Solicitation

    Explosion Proof HEPA Vacuums

    Notice 477d87573ce94fb7a72d530364e854fc on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

F3YCEB5105A103

Archive Date

May 10, 2025