GovChime
Notice ID: f7d1838f320847f5a7e7033cd0606299Solicitation

F-16 Tester, Pitot and St

Responses closed . Full description on SAM.gov.

Overview

Response deadline
11:59 PM MST
Posted
January 21, 2026
Notice type
Solicitation
NAICS
334514: Totalizing Fluid Meter and Counting Device Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA AVIATION.DLA AVIATION OGDEN.DLA AVIATION AT OGDEN, UT
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
SPRHA4-26-Q-0268
Notice ID
f7d1838f320847f5a7e7033cd0606299

Description

One each of NSN 4920-01-527-2388.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • SPRHA426Q0268.pdf

    177 KBAdded in Solicitation version 2Posted
    Download
  • SOW.pdf

    215 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Solicitation

    F-16 Tester, Pitot and St

    Notice f641f7314c0e476591f81cb9438c2dcc on SAM.gov

  2. 2
    Version 2SolicitationCurrent

    F-16 Tester, Pitot and St

    Notice f7d1838f320847f5a7e7033cd0606299 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHAB, Kimberley Collier, Contract Specialist, via e-mail: kimberley.collier@dla.mil. For request for solicitation, provide your name, the company name and Cage Code and a telephone number. PRON: W58H0Z0098613232. The Government proposes to acquire on a Three year Indefinite Delivery Indefinite Quantity (IDIQ) contract a minimum quantity of 12 each up to 47 each maximum of a TESTER,FUEL INTEGRI; NSN: 4920-01-521-2579; Part Number: SK2000FIT applicable to the BLACKHAWK. Production Lead Time (PLT) without First Article Testing is 12 each, Days After Contract Award (DACA) with deliveries to TOBYHANNA, PA, 18466-5059. This item is restricted to the following: HABCO INDUSTRIES, INC, CAGE CODE: 51826 The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by visiting AvMC's public website: https://amrdec.army.afpims.mil/Directorates/STI/ All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.
90%
Pre-Solicitation11/12/2027
Two each of NSN 4920-99-575-1342.
73%
Solicitation01/16/2026
13 May 2026: The purpose of this update is to advise Industry the following: Industry Questions and Answers dated 13 May 2026 are posted here. RFP Amendment 0007 incorporating changes as a result of industry questions is posted here. Please note the proposal receipt date is not extended at this time. Questions may still be submitted; however, the Government does not guarantee a response prior to proposal receipt deadline. 7 May 2026: The purpose of this update is to advise Industry the following: Industry Questions and Answers dated 7 May 2026 are posted here. RFP Amendment 0006 incorporating administrative changes as a result of industry questions is posted here. 1 May 2026: The purpose of this update is to advise Industry the Questions and Answers dated 1 May 2026 are posted here. 30 Apr 2026: The purpose of this update is to provide RFO Amendment 0005. RFP Amendment 0005 incorporates newly required clause/clause revisions and revises the K-900 provision regarding non-government advisors. 23 April 2026: The purpose of this update is to provide RFP Amendment 0004. RFP Amendment 0004 extends the proposal due date to 14 May 2026, 4:30 PM EDT. Revised Attachments as referenced in RFP Amendment 0004 are hereby posted here. 22 April 2026: The purpose of this update is to advise Industry the following: Industry Questions and Answers dated 22 April 2026 are posted here. RFP Amendment 0004 to extend the proposal due date (time) as well as the other changes addressed in the Industry Questions with Answers will be forthcoming. 14 Apr 2026: The purpose of this update is to provide RFP Amendment 0003. RFP Amendment 0003 extends the proposal due date to 14 May 2026, 3:30 PM EDT. Revised Attachments as referenced in RFP Amendment 0003 are hereby posted here. All comments, recommendations, concerns, and questions should be submitted to the PCO, Brandi Owens, brandi.owens@us.af.mil, and the Contract Specialist, Adam Hudson, adam.hudson.4@us.af.mil 30 Mar 2026: The purpose of this update is to advise Industry the following: The USG anticipates RFP Amendment 0003 will be released within two weeks from today. RFP Amendment 0003 will extend the proposal due date as well as make other changes such as reduce the LRIP quantities, incorporate Long Lead Item CLINs, and incorporate revised attachments. This SAM.gov posting will be revised at that time to reflect the revised proposal due date. SAM.gov still reflects 17 Mar 2026 as the proposal due date as SAM.gov does not allow a blank date entry. Industry Questions with Answers will be posted shortly. All comments, recommendations, concerns, and questions should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil, and the Contract Specialist, Adam Hudson, adam.hudson.4@us.af.mil . Effective 06 Apr 2026 the PCO for this effort will be Brandi Owens, Brandi.Owens@us.af.mil. The Contract Specialist will remain as Adam Hudson, adam.hudson.4@us.af.mil 06 Mar 2026: The purpose of this update is to advise Industry the following: Industry Questions with Answers are posted here. RFP Amendment 0003 to extend the proposal due date as well as the other changes addressed in the Industry Questions with Answers will be forthcoming. Proposals are not due on 17 Mar 2026, however, SAM.gov will still reflect this date as SAM.gov does not allow a blank date entry. The revised proposal receipt date is To Be Determined. This SAM.gov posting will be revised at that time to reflect the revised proposal due date. All comments, recommendations, concerns, and questions should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist, Adam Hudson, adam.hudson.4@us.af.mil . 25 Feb 2026: The purpose of this update is to post Questions to Industry and to advise that RFP Amendment 0003 is forthcoming. Amendment 0003 will reduce LRIP quantities and extend the proposal due date. 1) Questions to Industry dated 25 Feb 2026 is posted here. 2) Request feedback to be received NLT 4pm EST, Monday, 02 Mar 2026 to the POCs listed below. 3) All comments, recommendations, concerns, and questions should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil; and the Contract Specialist, Adam Hudson, adam.hudson.4@us.af.mil 23 Feb 2026: As of 23 Feb 2026 there has not been a resolution from the SAM.gov helpdesk regarding the RFP Attachment 6_Excel Cost Model, dated 15 Sep 2025. Please email oya.harrison.1@us.af.mil to request the RFP Attachment 6_Excel Cost Model, dated 15 Sep 2025. 19 Feb 2026: We are working with the SAM.gov helpdesk to get the issue with the RFP Attachment 6_Excel Cost Model, dated 15 Sep 2025, resolved. An update will be posted here once it is resolved. 17 Feb 2026: The purpose of this update is to provide RFP Amendment 0002. RFP Amendment 0002 extends the proposal due date to 17 Mar 2026, 3:30 PM EDT. Revised Attachments as referenced in RFP Amendment 0002 are hereby posted here. 17 Feb 2026: The purpose of this update is to advise Industry that the USG anticipates RFP Amendment 0002 will be released NLT two weeks from today. 22 Sep 2025: The purpose of this update is to provide RFP Amendment 0001. RFP Amendment 0001 extends the proposal due date to Indefinite due to a received protest. However, SAM.gov will reflect a date of 31 Dec 2026 as SAM.gov does not allow a blank date entry. A firm proposal due date will be identified in an RFP amendment upon the resolution of the protest. 18 Sep 2025: The purpose of this update is to advise Industry the following: Proposals are not due on 22 Sep 2025. However, SAM.gov will still reflect this date as SAM.gov does not allow a blank date entry. The revised proposal receipt date is To Be Determined. An RFP Amendment to extend the proposal due date as well as the other changes addressed in the Industry Questions with Answers will be forthcoming. This SAM.gov posting will be revised at that time to reflect the revised proposal due date. All comments, recommendations, concerns, and questions should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist, Alexis Davis, alexis.davis.13@us.af.mil . 04 Sep 2025: The purpose of this update is to provide Industry with answers to their RFP questions. Industry Questions with Answers are posted here. An RFP Amendment for the changes addressed in the Industry Questions with Answers will be forthcoming. All comments, recommendations, concerns, and questions should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist, Alexis Davis, alexis.davis.13@us.af.mil 05 Aug 2025: This Request for Proposal (RFP) is for Common Armament Tester-Fighters (CAT-F). This effort requires the development, manufacture, and sustainment of a common armament tester for the F-16, F-15, and A-10 platforms, capable of testing Preload, Clean Wing, and Fault Isolation Requirements at both O-Level and I-Level Maintenance. The North American Industry Classification System Code (NAICS) for this requirement is 334515, Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a corresponding small business size standard of 750 employees, and Product or Service Code (PSC) 4920. This acquisition will utilize the Tradeoff Source Selection Procedures in accordance with the DoD Source Selection Procedures, dated 20 Aug 2022, and DAFFARS MP 5315.3. It will be comprised of an Initial Source Selection that will result in up to two (2) Indefinite Delivery Indefinite Quantity (IDIQ) contracts to two (2) offerors with a Final Downselect to at least one (1) contractor following Critical Design Review (CDR). The Initial Source Selection will result in the award for CAT-F System Design. In the Initial Source Selection, the Government will conduct a full and open competition to narrow the competitive field down to no more than two (2) contractors that will execute CAT-F System Design and proceed to the Final Downselect. The Contracts will contain options for the execution of the program beyond the basic contract. The Final Downselect source selection will determine which contractor’s Option I may be exercised. The IDIQ contracts will utilize a mix of pricing arrangements, including Cost Plus Fixed Fee (CPFF), Firm Fixed Price (FFP), and Cost Reimbursement-No Fee (CR-NF). The Period of Performance for the resultant contracts shall include a 1 year Basic and 4 one year Options (in accordance with FAR 52.217-9, Option to Extend the Term of the Contract). The Basic is for Prototype Design and Digital Development of the O-Level and I-Level Testers. Option I is for EMD and Production but will only be exercised for the contractor(s) chosen during the Downselect. The following estimated quantities will be required for delivery during the Basic: Qty of 4 for the F-16 O-Level Handheld Tester Prototype Qty of 4 for the F-15 O-Level Handheld Tester Prototype Qty of 4 for the A-10 O-Level Handheld Tester Prototype The following estimated quantities will be required for delivery during Options I-IV: Qty of 303 EA for the F-16 O-Level Testers Qty of 172 EA for the F-15 O-Level Testers Qty of 68 EA for the A-10 O-Level Testers Qty of 143 EA for the F-16 I-Level Testers Qty of 80 EA for the F-15 I-Level Testers Qty of 42 EA for the A-10 I-Level Testers Offerors shall prepare their proposals in accordance with mandatory and detailed instructions contained in the RFP. If access to the bidder’s library is needed, submit a completed DD Form 2345, Militarily Critical Technical Data Agreement, to the POCs listed below. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist, Alexis Davis, Alexis.Davis.13@us.af.mil.
68%
Solicitation05/14/2026
This Synopsis serves as a notice of intent that the Automated Test System Contracting Branch, AFLCMC/ROKB, at Robins Air Force Base, GA, anticipates issuing a Request for Proposal (RFP) on SAM.gov under Notice ID FA8533-25-R-0002 for the Common Armament Tester-Fighters (CAT-F). This effort requires the design, development, manufacture, and sustainment of the CAT-F for the F-16, F-15, and A-10 platforms, capable of testing Preload, Clean Wing, and Fault Isolation Requirements at both O-Level and I-Level Maintenance. The North American Industry Classification System Code (NAICS) for this requirement is 334515, Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a corresponding small business size standard of 750 employees, and Product or Service Code (PSC) 4920. This acquisition will be a Full and Open Competitive Acquisition with no small business set aside. This acquisition will utilize the Tradeoff Source Selection Procedures in accordance with the DoD Source Selection Procedures, dated 20 Aug 2022, and DAFFARS MP 5315.3. It will be comprised of an Initial Source Selection that will result in up to two (2) Indefinite Delivery Indefinite Quantity (IDIQ) contracts to two (2) offerors with a Final Downselect to at least one (1) contractor following Critical Design Review (CDR). The Initial Source Selection will result in the award for CAT-F System Design. In the Initial Source Selection, the Government will conduct a full and open competition to narrow the competitive field down to no more than two (2) contractors that will execute CAT-F System Design and proceed to the Final Downselect. The Contracts will contain options for the execution of the program beyond the basic contract. The Final Downselect source selection will determine which contractor’s Option I may be exercised. The IDIQ contracts will utilize a mix of pricing arrangements, including Cost Plus Fixed Fee (CPFF), Firm Fixed Price (FFP), and Cost Reimbursement-No Fee (CR-NF). The Period of Performance for the resultant contracts shall include a 1 year Basic and 4 one year Options (in accordance with FAR 52.217-9, Option to Extend the Term of the Contract). The Basic is for Prototype Design and Digital Development of the O-Level and I-Level Testers. Option I is for EMD and Production but will only be exercised for the contractor(s) chosen during the Downselect. The following approximate quantities will be required for delivery during the Basic: Qty of 4 for the F-16 O-Level Handheld Tester Prototype Qty of 4 for the F-15 O-Level Handheld Tester Prototype Qty of 4 for the A-10 O-Level Handheld Tester Prototype The following approximate quantities will be required for delivery during Options I-IV: Qty of 303 EA for the F-16 O-Level Testers Qty of 172 EA for the F-15 O-Level Testers Qty of 68 EA for the A-10 O-Level Testers Qty of 143 EA for the F-16 I-Level Testers Qty of 80 EA for the F-15 I-Level Testers Qty of 42 EA for the A-10 I-Level Testers Delivery Schedule: O-Level Handheld Tester Prototypes will be delivered to begin 12 months ARO Order The approximate Request for Proposal (RFP) issue date is FY25 Q3, with a response date of 45 days later. In accordance with FAR 5.2079(c)(16)(i) All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign Participation is not permitted. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist, Alexis Davis, Alexis.Davis.13@us.af.mil.
68%
Pre-SolicitationOpen
SYNOPSIS: #N68335-26-Q-1204 Aircraft Pressurized Cabin Leakage Tester (APCLT) Naval Air Warfare Center Aircraft Division - F/A-18F and EA-18G Royal Australian Air Force (RAAF) Program The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Hydraulics International, Inc. (CAGE: 56529) for the Aircraft Pressurized Cabin Leakage Tester (APCLT) in support of the NAWCAD F/A-18F and EA-18G Royal Australian Air Force (RAAF) Program. This order will procure one (1) APCLT (Part Number (P/N): 4129AS0100-1, National Stock Number (NSN): 4920-01-658-2036). The APCLT is required to check aircraft pressurized cabins and canopy seals for leaks and for the ability to control aircraft cabin pressure. The pneumatic cabin pressure leakage tester will provide the means to meet the requirement and is required by the RAAF. The pneumatic cabin pressure leakage tester is a portable unit that runs on facility supplied compressed air and that can supply various combinations of air flow and air pressure to check leakage and pressure regulation in aircraft cabins and canopy seals. Hydraulics International, Inc., as the Original Equipment Manufacturer (OEM) of the APCLT, is the only source with the requisite knowledge, technical experience, and production-level data to produce these components. The components being procured are integral to check aircraft pressurized cabins and canopy seals for leaks and for the ability to control aircraft cabin pressure and are critical to maintaining operational readiness. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 4920 – Aircraft Maintenance and Repair Shop Specialized Equipment NAICS Code: 334513 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals – size standard 750
66%
Pre-Solicitation11/12/2026

Additional Details

Solicitation Number

SPRHA4-26-Q-0268

Archive Date

Feb 27, 2027

Office Address

HILL AIR FORCE BASE, UT, 84056-5820