Notice ID: 4572e2c42ad84b899d6aac1396d3f6c3Award NoticeAwarded
AFPSL Load Cell Exchange
Awarded on June 22, 2026. Award Notice posted by DEPT OF DEFENSE (DEPT OF THE AIR FORCE) on June 26, 2026. Solicitation FA226326Q0012.
NAICS 334516 (Analytical Laboratory Instrument Manufacturing). Place of performance: Ohio. Full description on SAM.gov.
Awarded tounder FA226326D0006 (source: SAM.gov award notice)• $882.4K
Description
This RFQ was solicited as a sole-source procurement under RFO 6.103.
Overview
Agency:
Department of WarDepartment of the Air Force
Office:AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.COMBAT READINESS.FA2263 AFLCMC ROMK AFMETCAL
Posted:June 26, 2026
NAICS:334516: Analytical Laboratory Instrument Manufacturing
Last Updated:Aug 21, 2026
PSC:6625: ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS
Response Deadline:
Not specified
Set-Aside:Not specified
Type:Award Notice
Place of Performance:Ohio, 43056
Award Date:Jun 22, 2026
Award Amount (SAM.gov award notice):$882.4K
Award Overview
Award Number
FA226326D0006
Award Amount (SAM.gov award notice)
$882.4K
Award Date
Jun 22, 2026
Awardee
Awardee UEI
VLANNQEE25E3
Awardee CAGE Code
1TY59
Original Solicitation
Notice ID: 4572e2c42ad84b899d6aac1396d3f6c3
Posted Date: Jun 26, 2026
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Christine Patterson
Documents
Select documents to download
Showing 4 of 4 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Jun 26, 2026 | 766.13 KB | |||
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Jun 26, 2026 | 100.35 KB | |||
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Jun 26, 2026 | 128.75 KB | |||
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Jun 26, 2026 | 128.41 KB |
Lifecycle
Solicitation:
FA226326Q0012- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisMay 1, 2026
AFPSL Load Cell Exchange
- AwardedCurrentJun 26, 2026
AFPSL Load Cell Exchange
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
| Awarded | 334516 | No Set-Aside | 09/04/2026 | Open | - | ||
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: AFLCMC Operational Contracting Branch at Wright-Patterson Air Force Base, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including small businesses, capable of manufacturing and delivering customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services. These precision optical components will support AFIT’s Extreme Light Laboratory and its ultra-intense laser experiments involving advanced laser-matter interactions. This notice is issued solely to determine the availability and capability of qualified sources to meet the Government’s requirements. This notice is not a solicitation, request for quotation, or commitment by the Government to award a contract. A small business set-aside determination has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all labor, materials, equipment, manufacturing capability, quality assurance, testing, inspection documentation, packaging, transportation, and other resources necessary to produce and deliver customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services to the Air Force Institute of Technology (AFIT) at Wright-Patterson Air Force Base, Ohio. The required items and services include, but are not limited to: System and Compatibility Requirements: a. The contractor shall provide 66 customized off-axis parabolic (OAP) mirrors for use in AFIT’s Extreme Light Laboratory. b. Each mirror shall use a fused-silica substrate. c. Each mirror shall have a diameter of 30 mm. d. Each mirror shall have a parabolic focus at 45 degrees. e. The mirrors shall be compatible with the Government’s ultra-intense laser research application and shall provide the precision focal spot required for the Extreme Light Laboratory. Performance and Operational Specifications: a. The optical surface roughness shall be less than 1 nm root mean square (RMS). b. The scratch/dig specification shall be 20-10. c. The backside of each mirror substrate shall be polished. d. The contractor shall perform quality testing and inspection sufficiently to verify compliance with all required optical and surface-quality characteristics. e. The contractor shall provide applicable test data and inspection documentation with the delivered mirrors. Reagents and Consumables: a. The contractor shall provide protected-gold coating services for the required OAP mirrors. b. The protected gold coating shall be applied to the fused-silica substrate. c. The coating shall provide an average reflectivity of not less than 97 percent. d. The required reflectivity wavelength shall be 780 ± 40 nm. e. The required angle of incidence shall be 45 degrees. f. The contractor shall provide all materials, coating consumables, and related manufacturing resources necessary to meet the stated coating requirements. Physical and Safety Specifications: a. The contractor shall package and protect the mirrors to prevent damage during handling, shipment, and delivery. b. The contractor shall provide all required quality, inspection, and test documentation with delivery, including available certificate of conformance, material certification, surface-measurement data, and coating-performance data, as applicable. c. The contractor shall ship all required mirrors and associated documentation to the Government-designated delivery location at Wright-Patterson Air Force Base, Ohio. d. Delivery shall be completed within 98 calendar days after receipt of order (ARO). e. The mirrors delivered shall be free from defects in material and workmanship under normal and proper use for a minimum period of two years after Government receipt. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company business size status under a relevant NAICS code 334516. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than October 23, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: “FA860127Q0003, Sources Sought: Off-Axis Parabolic Mirrors.” Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. Please submit all response packages directly to the following Points of Contact (POCs): Contract Specialist: Name: Alejandro Quiles Email: alejandro.quiles_sanchez.1@us.af.mil Contracting Officer: Name: Jessica Stamper Email: jessica.stamper.2@us.af.mil This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government’s assessment of the capability statements received will factor in whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Statement of Work List of Minimun Requirements | Market Research | 334516 | No Set-Aside | 10/14/2026 | 10/23/2026 | Wright Patterson AFB, OH | |
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering a Midwave Camera with the capabilities described herein for the Air Force Institute of Technology, located at Wright Patterson Air Force Base, Ohio (WPAFB). The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. All interested firms shall submit a response to the Primary Points of Contact, Ms. Claire Hess at claire.hess@us.af.mil and Ms. Jessica Stamper at jessica.stamper.2@us.af.mil, demonstrating their capability to provide a Midwave Camera. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion. The North American Industry Classification System (NAICS) code assigned to this acquisition is 334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). Respondents are further requested to indicate their status as a foreign-owned/foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made. Respondents should note the potential application of Limitations on Subcontracting (RFO 52.219-14) and the Non-Manufacturer Rule (RFO 52.219-33) to a future acquisition that may result from this Sources Sought. Respondents should consider how the primary tasks identified in this notice will be broken out between prime contractor and subcontractors and address subcontracting in their response, if applicable/necessary. Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program. CAPABILITIES PACKAGE: All interested firms shall submit a capabilities package to provide the Midwave Camera that explicitly demonstrates their capability to provide the required service. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 29 OCTOBER 2026 AT 3:00 PM EASTERN TIME. All correspondence sent via email shall contain a subject line that reads: Midwave Camera. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted. Responses shall be submitted via email to the following addresses: claire.hess@us.af.mil and jessica.stamper.2@us.af.mil Please direct all questions concerning this acquisition to Ms. Claire Hess at claire.hess@us.af.mil and include the necessary subject line indicated above. Attachments: Instructions Technical Requirements | Market Research | 334516 | No Set-Aside | 10/14/2026 | 10/29/2026 | Wright Patterson AFB, OH | |
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering MIRA Camera with the capabilities described herein for the Air Force Institute of Technology located at Wright Patterson Air Force Base, Ohio (WPAFB). The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. All interested firms shall submit a response to the Primary Points of Contact, SrA Mark Hager at mark.hager.3@us.af.mil and Ms. Linh Jameson at linh.jameson@us.af.mil, demonstrating their capability to provide MIRA camera. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion. The North American Industry Classification System (NAICS) code assigned to this acquisition is 334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). Respondents are further requested to indicate their status as a foreign-owned/foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made. Respondents should note the potential application of Limitations on Subcontracting (FAR 52.219-14) and the Non-Manufacturer Rule (FAR 52.219-33) to a future acquisition that may result from this Sources Sought. Respondents should consider how the primary tasks identified in this notice will be broken out between prime contractor and subcontractors and address subcontracting in their response, if applicable/necessary. Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program. CAPABILITIES PACKAGE: All interested firms shall submit a capabilities package to provide MIRA Camera that explicitly demonstrates their capability to provide the required service. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 14 October 2026 AT 12:00 PM EASTERN DAYLIGHT TIME. (7 DAYS) All correspondence sent via email shall contain a subject line that reads: MIRA Camera. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted. Responses shall be submitted via email to the following addresses: mark.hager.3@us.af.mil and linh.jameson@us.af.mil Please direct all questions concerning this acquisition to SrA Mark Hager at mark.hager.3@us.af.mil and include the necessary subject line indicated above. Attachments: Instructions Statement of Work (SOW) | Market Research | 334516 | No Set-Aside | 10/07/2026 | 10/14/2026 | Wright Patterson AFB, OH | |
This combined synopsis/solicitation has been posting utilizing the Solicitation Module within the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil/. All proposals must be submitted within the Solicitation Module prior to the solicitation closing time. Proposals will not be accepted via email or DoD SAFE. Links to this solicitation and training for the Solicitation Module are listed in the Attachment/Links section of this posting. All solicitation attachments will be posted inside the Solicitation Module. Please monitor the solicitation postings at https://sam.gov and https://piee.eb.mil/ sites for any updates. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.201, as supplemented with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the Revolutionary FAR Overhaul (RFO) and DFARS Revolutionary FAR Overhaul Class Deviations (R-DFARS). The RFO regulations are available electronically at the RFO site, https://www.acquisition.gov/far-overhaul/far-part-deviation-guide. The R-DFARS site are available electronically at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. This announcement constitutes the only solicitation for which a Request for Quotation (RFQ) will be issued. It is the offerors responsibility to monitor this site for the release of amendments (if any). The RFQ number is FA226326Q0014 and shall be referenced on any offer submitted. The North American Industry Classification System (NAICS) code for this acquisition is 334516 and the business size standard is 1000 employees. AFMETCAL at Heath OH intends to award one firm fixed price contract under Simplified Acquisition Procedures (SAP) in accordance with FAR Part 12-Acquisition of Commercial Items, for the purchase of GEC MD8060 Scale Force Press Manual Upgrade with a 3 year commercial warranty, COTS manual, Safety Data Sheet (SDS) Report and Commercial Engineering Design Data.Products offered shall be commercial items or commercially available off-the shelf (COTS) items meeting the definitions in FAR Part 2. Items proposed shall be new units. Reconditioned, remanufactured, or used items are not acceptable and shall not be proposed. The unit must meet the requirements of Purchase Description (PD) (Attachment 1) to the RFQ. The RFQ with applicable documents are available for download at Solicitation Module within the PIEE website. Please review ALL documents carefully.IMPORTANT NOTICE TO OFFERORS: All prospective awardees are required to register at SAM and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Offerors must also register for the Solicitation module on the PIEE website (https://piee.eb.mil/) to submit a proposal. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area WorkFlow (WAWF) through PIEE is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at https://piee.eb.mil/. Prior to submitting invoices in the production system, contractors must register for an account at https://piee.eb.mil/. Offers MUST:(1) be valid for a period of 120 days,(2) be for the item described in the purchase description (List of Attachments, Attachment 1),(3) be for a new unit (not reconditioned, remanufactured, or used unit),(4) be FOB Destination,(5) include a delivery schedule, if unable to meet delivery schedule in Deliveries and Performance section,(6) include copy of commercial price list,(7) include copy of commercial warranty,(8) include name of and be signed by an authorized company representative along with telephone number, facsimile number, and email address,(9) include taxpayer identification number (TIN), CAGE Code Number and DUNS Number,(10) include a technical proposal that includes a written response to each paragraph of the PD,(11) include completed Supplies or Services and Price/Cost section, which includes pricing for Production year quantities, CLINs 0001-0006 only need unit prices added in Supplies/Service column (do not fill out Unit price or Amount column for CLINs 1001-1003),(12) include a completed Total Evaluated Price Worksheet (List of Attachments, Attachment 5),(13) completed Offeror Representations and Certifications ������ Commercial Items. Offerors shall ensure information in SAM is current.Offers (including both written proposal and commercial unit submission) must be received no later than 16 July 2026 at 2:00 PM EDT. Offerors shall submit electronic files to Solicitation Module, https://piee.eb.mil/, following the instructions provided in List of Attachments ������ Attachment 3 of the RFQ, under Electronic Submission of Proposal paragraph. Offers submitted in forms other than through Solicitation module are not permissible and will not be considered. Please note that the uploaded files must be timestamped by the offer due date and time. Offerors bare the risk for receipt of submitted offers being untimely. Offerors shall allow sufficient time for receipt of electronic submissions by the due date and time. All responsible sources may submit an offer, which if received timely shall be considered by this agency. | Awarded | 334516 | Total Small Business Set-Aside | 09/10/2026 | Open | - |
Additional Details
Solicitation Number
FA226326Q0012
Archive Date
Aug 1, 2026
Office Address
HEATH, OH, 43056-6116