GovChime
Notice ID: dbab59f803d0419894ef9220b8f0df24Combined Synopsis/Solicitation

Auto Hobby Shop Garage Doors

Archived on May 21, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM UTC−05:00
Posted
May 13, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
332321: Metal Window and Door Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA2823 AFTC PZIO
Place of performance
Eglin AFB, FL, 32542
Last updated
Dec 4, 2025

Identifiers

Solicitation number
FA282324Q3017
Notice ID
dbab59f803d0419894ef9220b8f0df24

Description

This is a combines synopsis/solicitation for the replacement of 14 existing doors and installation of 14 new Heavy Duty Wind Rated Overhead Roll-Up Garage Doors. Please see attachment for details. Primary POC: Ana Holloway Email: ana.holloway.1@us.af.mil Phone: 850-882-3466

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:FA282324Q3017
  1. Combined Synopsis
  1. 3×
    Combined SynopsisCurrentMay 3, 2024

    Auto Hobby Shop Garage Doors

    Notice dbab59f803d0419894ef9220b8f0df24 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The 1st Special Operations Wing at Hurlburt Field, Florida, is seeking quotations for the procurement of mobile vehicle barriers. This RFQ is issued to identify qualified vendors capable of providing reliable and effective mobile vehicle barriers to enhance security and control access across the installation. The required mobile vehicle barriers must be easily transportable, rapidly deployable, and meet the specific performance and technical specifications outlined in the attachments. Please refer to the attached documents for detailed information regarding the submission process, requirements, and all relevant deadlines. For comprehensive details on the statement of work, and terms and conditions, please see the attachments to this request.Funds are not presently available for the effort. No award will be made under this solicitation until funds are available. This solicitation is being posted in accordance with FAR Subpart 16.5, Section 16.505 Ordering. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.
-Solicitation03/25/2026
CLIN 0001 - Basic EAC Workshop IAW attached salient characteristics list CLIN 0002 - Portable Field Shower Set With Sinks IAW attached salient characteristics list ALL QUOTES MUST BE SUBMITTED THROUGH PIEE SOLICITATION MODULE, ALL OTHER QUOTES WILL NOT BE VALIDATED!
-Solicitation07/02/2026
PIEE Submission. Offerors SHALL deliver proposal through the Solicitation Module in Procurement Integrated Environment (PIEE). Offerors are responsible for ensuring PIEE registration and any training needed is completed prior to anticipated solicitation closing date. See links below:Vendor Registration: https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf Solicitation Module Training: https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml......................................................................................................................................................................................................CLIN 0001: ISU 90 Containers, or Equal (Part # 56202-000; NSN: 8145-01-465-4187)in accordance with the attached Parts List and Salient Characteristics documents. The following colors are acceptable: Green, Tan, Black, Gray, and White. Full shipment must occur NLT 1 May 2026 to meet mission needs............................................Amendment 0001: The purpose of this amendment is to: increase the quantities from 6 EA to 9 EA; Update this solicitation from unrestricted to a 100% Total Small Business Set-Aside; Replace the original attachments with 6 EA as the quantity updated attachments with 9 EA as the quantity. All other terms and conditions remain unchanged.
-Combined Synopsis03/11/2026
** THIS IS A BRAND NAME OR EQUIVALENT REQUIREMENT ** for Stock replenishment of stainless steel plates ** SEE THE ATTACHMENTS ** ** WE DO NOT PAY BY CREDIT CARD ** ** PLEASE INCLUDE SHIPPING COST IF THERE IS SHIPPING ** VENDORS MUST REFERENCE THE TRACKING NUMBER (80NSSC27948697Q) IN THE SUBJECT LINE OF YOUR EMAIL WHEN SUBMITTING A QUOTE!!
-Combined Synopsis11/12/2026
STATEMENT OF WORK / REQUEST FOR QUOTE A. INTRODUCTION: 1. The Federal Bureau of Prisons (FBOP), FCC Lompoc, 3901 Klein Blvd., Lompoc, CA 93436, is seeking quotes from qualified vendors for the supply and delivery of nine (9) complete fire escape door assemblies, including doors, frames, and all required hardware. The doors are for a prison facility application and must meet all relevant local, state, and federal fire and life safety codes. 2. "Equal or Better" Product Substitution: Proposals must meet or exceed the specified product quality. If an alternative product or component is offered, the vendor must submit all technical documentation, certifications, and test results for consideration. 3. Government's Right of Final Technical Acceptance: The government retains the sole and final authority to determine technical acceptance for all submitted products, based on the provided documentation and compliance with stated standards. B. SCOPE OF WORK: 1. The vendor shall provide all materials as specified below. All components must be new, U.L. Listed or labeled by a recognized testing agency acceptable to the Authority Having Jurisdiction (AHJ) and conform to the standards referenced herein. C. TECHNICAL SPECIFICATIONS: TABLE 1: COMPONENTS: All units shall be identical unless otherwise noted. Component Requirement Quantity 9 Complete Door Assemblies Door Size 36" wide x 80" high x 2" thick Door Material Hollow Metal Door, minimum 12 Gauge galvanneal steel Core Ribbed and Insulated (mineral core for fire rating is acceptable/preferred) Fire Rating Rating must be compatible with the wall's fire resistance rating, typically 75% of the wall's rating. See required fire rating for correctional facilities on Table 2 Handing 4 Left Hand Outswing, 5 Right Hand Outswing. Frame Material Minimum 12 Gauge galvanneal steel, fire-rated and labeled Frame Type Knock-down (KD) for drywall/unit masonry or welded for masonry. Frames are to be prepared for 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Finish Factory primed for field painting TABLE 2: FIRE RATING: The complete door assembly (door, frame, and all hardware) shall be 90 minutes fire rated. This rating must be compatible with the fire-resistance rating of the specific wall assembly in which the door will be installed, as dictated by the building's fire safety plan and local code requirements. Category Requirement Description Applicable Standards & Agencies Listing & Labeling All components must be listed and labeled by a recognized third-party testing agency acceptable to the Authority Having Jurisdiction (AHJ). Underwriters Laboratories (UL), Intertek (WH), Factory Mutual (FM) Testing Standard Assemblies shall be tested under positive pressure conditions. NFPA 252, ANSI/UL 10C Labeling Visibility A permanent, legible fire rating label must be affixed to both the door and the frame and remain visible after installation for inspection purposes. N/A Code Compliance Vendor must confirm that all components, when installed as an assembly, comply with relevant building and safety codes for correctional facilities (Group I-3 Occupancies, IBC). NFPA 80 (Standard for Fire Doors and Other Opening Protectives) International Building Code (IBC) TABLE 3: HARDWARE SPECIFICATIONS: All hardware must be "listed" or "labeled" for use on a fire-rated assembly, compatible with the specified fire rating, and factory-prepped for ANSI/BHMA Grade 1 standards. Item Requirement Quantity per Door Notes Hinges Heavy-duty steel ball bearing hinges, UL Listed 3 Exit Device Panic Hardware/Fire Exit Hardware (rim or mortise type) self-latching 1 set Must be a crossbar or touch bar device, operable with an applied force of 15 lbs or less. Locking Must be openable from the egress side at all times without special knowledge or tools. Keyed access from the exterior is permitted. 1 set 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Door Closer Heavy-duty, adjustable, surface-mounted, UL Listed 1 unit Must be self-closing and ensure positive latching. Seals Smoke and draft control gasketing/seals 1 set Required for a complete smoke-rated assembly. Threshold [Specify if required, e.g., 1/2" beveled aluminum, non-combustible] 1 unit (if required) D. CODE AND STANDARD REQUIREMENTS: 1. All supplied materials and the complete assembly must comply with the latest editions of the following codes and standards (or local equivalents as adopted by the AHJ): NFPA 80: Standard for Fire Doors and Other Opening Protectives NFPA 101: Life Safety Code International Building Code (IBC) International Fire Code (IFC) OSHA requirements for exit routes UL 10C or NFPA 252: Standard for positive pressure fire testing of door assemblies UL 1784: Standard for Air Leakage Tests of Door Assemblies (if smoke rating is required) 2. Vendors must confirm that all components, when installed as an assembly, will bear a permanent, legible label from a recognized third-party testing agency (e.g., UL, Intertek/WH, FM). E. SUBMISSION REQUIREMENTS: 1. Itemized pricing for doors, frames, hardware, and any included accessories. 2. Proposed lead time for manufacturing and delivery to FCC Lompoc 3. Confirmation of compliance with all referenced codes and standards. 4. Cut sheets/product data for all proposed items. F. DELIVERY OF MATERIALS: 1. Deliveries shipped directly to FCC LOMPOC can only be received between 7:30 a.m. and 2:00 p.m., Monday through Friday, excluding Federal Holidays. 2. POC: Mr. Fernando Pena, BOP Engineering Technician, FXPena@bop.gov, or 805-735-2771 3. FBOP will be responsible for receiving or signing deliveries. 4. FCC LOMPOC will provide resources for loading and unloading materials or equipment upon arrival.
-Combined Synopsis11/16/2026

Additional Details

Solicitation Number

FA282324Q3017

Archive Date

May 21, 2024

Office Address

EGLIN AFB, FL, 32542-5418