Executive Airlift Flight Dispatch Services
Archived on October 27, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM EDT
- Posted
- August 20, 2026
- Notice type
- Sources Sought
- NAICS
- 488190: Other Support Activities for Air Transportation
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE DISTRICT OF WASHINGTON.FA2860 316 CONS PK
- Place of performance
- Andrews Air Force Base, Maryland, 20762
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA286027R0002
- Notice ID
- 85cdefa922cc4e66b09c0b1eb73e44fa
Description
The 316th Contracting Squadron is issuing this Sources Sought Notice as a
means of conducting market research to identify parties having an interest
in and the resources to provide Executive Airlift Flight Dispatch services in
accordance with the attached draft Performance Work Statement (PWS).
This notice shall not be construed as a formal solicitation or an obligation
on the part of the Government to acquire any products or services. In
addition, it does not guarantee that a subsequent solicitation will be issued.
Submission of any information in response to this Sources Sought notice is
voluntary and will assist in selecting the appropriate solicitation
type/method. Costs associated with any submission shall not be
reimbursed by the Government.
The proposed NAICS for this effort is 488190 (size standard $40M) Other
Support Activities for Air Transportation. Comments on this NAICS and
suggestions for an alternative NAICS code must include supporting
rationale. Your response shall identify your business size (large or small) in
relation to this NAICS code.
Interested parties are requested to submit an unclassified capability statement that includes:
1. Company name, mailing address, e-mail address, telephone and
FAX numbers, website address (if available), and the name,
telephone number, and e-mail address of a point of contact
having the authority and knowledge to clarify responses with
Government representatives. Include DUNS number, CAGE Code,
Tax Identification Number, and company structure (Corporation,
LLC, partnership, joint venture, etc.).
The company's standard format is acceptable; however, the limit for all
responses is not to exceed ten (10) single-sided, 12 font size, 8 1/2 x 11-inch
pages.
Respond via e-mail to Dione Brooks (CO) @ dione.brooks@us.af.mil and
Jamahl Tyson (CS)@ Jamahl.Tyson@us.af.mil. Questions must be
emailed to the aforementioned no later than 24 August 2026 @ 4 PM Eastern
Daylight Time. Final responses shall be received no later than 27 August
2026 @4 PM, Eastern Daylight Time.
NOTE: E-mail submissions are subject to size and type restrictions (typically
limited to less than 2 megabyte in size and only non-executable
attachments such as .doc or .pdf files) as well as any other appropriate
network security measures. It is the respondent's responsibility to verify the
e-mail was received and can be viewed. All responses must address each of
the above stated requirements.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
Performance Work Statement.pdf
597 KBAdded in Sources Sought version 1Posted
Lifecycle
- 1Version 1Sources SoughtCurrent
Executive Airlift Flight Dispatch Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Second Update to Soliciation: The quote/proposal deadline has been extended to 1100 EST on 10 November 2026. Update to Solicitation: The quote/proposal deadline has been extended to 1300 EST on 09 November 2026. We are providing both the conformed copy and SF-30. Offorers are encouraged to utilize the conformed copy due to readability issues with the SF-30. Questions recieved have been added to Section A with their respective answers. Solicitation Information: N6852027Q1011 is issued as a competitive procurement prepared In Accordance With (IAW) Federal Acquisition Regulation (FAR) Overhaul Part 12 Acquisition of Commercial Products and Commercial Services. Fleet Readiness Center East (FRCE), has a requirement to depaint, repaint, and conduct weight and balance on two C/KC-130 aircraft. Full Statement of Work (SOW) is provided in the attached RFQ N6852027Q1011. Contract Type: The Government intends to purchase on a firm fixed-price basis. Offerors must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoW contract. This may be accomplished electronically at http://www.sam.gov. Expenses incurred in the preparation of quotes in response to this RFQ are the vendor's sole responsibility and not reimbursable by the Government. All quotes/responses shall be submitted via email to Daniel Collins at Daniel.h.collins4@us.navy.mil no later than 13:00PM Eastern Standard Time on 05 November, 2026. ***Basis for Award*** Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote will only be evaluated based on the information provided. The award will be made on the basis of Past Performance, Technical Capability, and Price. A determination by the Government not to accept the proposal for not meeting the minimum requirement is solely within the discretion of the Government. ***Instructions to offeror’s*** Please include the following information with your response: 1. Blocks 30a-c signed on page 1 of N6852027Q1011 2. Acknowledgement via email confirming attachments have been reviewed 3. FOB: (Destination preferred) 4. Shipping Cost if applicable: 5. Cage Code: 6. Small Business: Yes ___ No ___ 7. Estimated Delivery Date: 8. If available on a Pricelist please provide a copy. 9. Total Amount: _____________________ | - | Combined Synopsis | 11/10/2026 |
1.0 INTRODUCTION a. The Naval Air Warfare Center Aircraft Division (NAWCAD), Naval Test Wing Atlantic (NTWL), Air Test and Evaluation Squadron TWO ONE (HX-21), Patuxent River, MD, has a follow-on requirement for Contractor Maintenance Support (CMS) Services to perform Organizational Level (O-Level) maintenance support services on assigned CH-53K test aircraft. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set[1]Aside opportunities exist. Additionally, this Sources Sought is being used to gather constructive information from industry to improve the Request for Proposal (RFP). This is for the NAWCAD HX-21 CH-53K O-LEVEL CMS. This is a follow-on requirement. The current contract information can be found in Section 3.0, paragraph b below. There have been significant changes to the scope as follows: estimated on-site personnel increasing from 62 FTEs to 75 FTEs. This is not subject to bundling or consolidation. b. The following documents are attached to this Sources Sought Notice: Draft Performance Work Statement (PWS) Draft Labor Categories and Staffing Matrix Draft Personnel Qualifications c. The following dates are anticipated time frames associated with this requirement: Estimated Draft RFP Release: 01 May 2027 Estimated Final RFP Release: 01 Aug 2027 Estimated Award Date: 01 May 2028 Period of Performance: 19 Aug 2028 – 18 Aug 2033 d. Primary Work Location/Place of Performance: Primary Work Location is detailed in Attachment 1, Draft PWS. 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 ANTICIPATED CONTRACT TYPE AND CONTRACT/PROGRAM BACKGROUND a. Anticipated Contract Type: C-Type Contract with Firm Fixed Price (FFP) CLINs for Labor and Cost Reimbursable CLINs for associated Other Direct Costs (ODCs). The Government is anticipating an additional Cost Reimbursable Performance Incentive CLIN. The anticipated Period of Performance includes one base period of 12 months with four one[1]year option periods for a total potential performance period of 5 years. b. The incumbent contract information is as follows: Incumbent Contractor: Adams Communication & Engineering Technology, Inc. Contract Number: N68520-20-D-0032 / N00421-23-F-0619 Contract End Date: 13 Aug 2028 Contract Type: FFP Previous Set-Aside Designation: Veteran-Owned Small Business (VOSB) Number of FTEs on the Contract: 62 FTEs c. Program Background: HX-21 has a follow-on requirement for CMS Services to perform O-Level (to include limited Intermediate Level (I-Level) and Depot Level (D[1]Level)) maintenance support services and other explicit test support tasks required to maintain assigned CH-53K aircraft to the proper standards required to meet the requirements of the HX-21 test schedule. The test schedule includes both flight and ground test events to meet the PMA-261 and other requirement owner program performance needs. The limited I-Level and D-Level work is contingent, provided skilled artisans and required tools are available and authorization is received from the cognizant authority. Services include aircraft maintenance and logistics support on aircraft, aircraft systems, and Support Equipment (SE) for which HX-21 has cognizant responsibility. Additional services include maintenance of prototype aircraft components, configuration and installation of internal/external ballast, and Helicopter Support Team (HST) duties, i.e. external sling load operations. The majority of work performance will be accomplished at Patuxent River, Maryland. Additional temporary work sites in direct support of projects are executed as detachments and include (but are not limited to) United States Naval Vessels, Department of War Installations, and Commercial Facilities which also encompass unscheduled emergent type maintenance support. A more detailed description is provided in Attachment 1, Draft PWS. 4.0 SPECIAL REQUIREMENTS AND REQUIRED CAPABILITES Any anticipated special requirements and required capabilities are detailed in Attachment 1, Draft PWS. This document details security clearance requirements for personnel, facility requirements, and any specific certifications that are required for the performance of this requirement. 5.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 488190, Other Support Activities for Air Transportation, with a Small Business Size Standard of $40.0M. b. The Product Service Code is J015, Maintenance, Repair, and Rebuilding of Equipment: Aircraft and Airframe Structural Components. c. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2020-O0008 dated 04/03/20 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize “similarly situated entities” to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government’s capability determination. 6.0 SUBMISSION REQUIREMENTS a. Interested parties should address the following questions in their response. The responses to these questions will aid the Government in determining whether a company is capable in performing the requirement, so it is important to address these areas with specific details. Organizational-Level Maintenance on Navy/Marine Corps Rotary Wing Aircraft. List all type/model rotary wing aircraft supported and total number of each within the past five years. Place emphasis on any modern fly-by-wire aircraft. Support ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. Describe all experience with ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. List all type/model aircraft and locations / supported organization. Safe for Flight (SFF) experience. The Contractor will be required to undergo a NAVAIR-led SFF Certification Inspection prior to commencing maintenance activities. Describe all experience with U.S. Navy SFF certification or similar experience. List all type/model aircraft and locations/supported organization. Cargo Capabilities. The CH-53K aircraft will regularly be reconfigured with internal cargo/ballast configurations and conduct external cargo loading using Helicopter Support Team procedures. State any experience with loading / rigging of internal and external slung cargo. Maintenance Training. State any experience with training a maintenance workforce on a new aircraft. List all type/model aircraft and locations / supported organization. Offsite Detachment Work. List all locations where work was performed while temporarily operating away from the primary work facility (within the last three years), to include shipboard operations on US Navy vessels. Recruitment Strategies. There is a limited community of CH-53K experienced maintenance personnel due to recent fleet fielding. List any experience with recruiting uniquely experienced personnel for “hard to fill” positions. Performance Incentives. State any experience with providing additional non-discretionary wages to SCA Labor hourly employees as a result of awarded performance incentives. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14, the small business prime must perform at least 50% of the work themselves in terms of the cost of performance. Provide an explanation of your company’s ability to perform at least 50% of the tasking described in this PBSOW for the base period as well as the option periods. Similarly situated small businesses may team together to meet the 50% requirement. If your company is planning to team with a similarly situated small business, the response must clearly identify the proposed team members and the capability statement must clearly articulate which portion of the work each team member will be responsible for. The response must be detailed enough for the Government to make a determination whether or not the proposed team will be able to perform 50% of the work when combined. Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, Unique Entity Identifier (UIE) number, etc. Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern under the NAICS code identified for this requirement. b. In addition to the above, the Government is requesting feedback on the draft PWS, draft labor categories and staffing matrix, and draft estimated labor rates by labor category. If there is any feedback on any of these documents, please include that within the capabilities statement submission. Specific details are requested to help in supporting the feedback. This feedback DOES NOT count against the page limitations for the capabilities statement and should be submitted as a separate file at the same time as the capabilities statement submission. The Government may or may not reach back out to the companies to discuss the feedback in depth. c. Interested parties shall adhere to the following instructions for the submittal of their capabilities statements. Page Limit and Format: Ten (10) 8.5 X 11 inch pages in Times New Roman font of not less than 10 point. Document Type: Microsoft Word, Adobe PDF, etc. Delivery: Electronic-mail (Email) Submission to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil Response date: Responses are due by 2:00PM EDT on 25 NOV 2026. No classified information shall be submitted in response to this Sources Sought. No phone calls will be accepted. All questions must be submitted via email to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, and Points of Contact (POC), including names, phone numbers, and email addresses. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. | - | Market Research | 11/25/2026 |
AMENDMENT 0006 - The purpose of this amendment is to extend the proposal due date to 16 November 2026. Please access Amendment 0006 via the PIEE Solicitation Module link listed within the Attachments section of this notice. | - | Solicitation | 11/16/2026 |
1. Purpose This Sources Sought Notice is issued for market research purposes only. The Government is seeking information from capable and interested businesses, including small businesses, that can provide systems engineering support for integration and test of Mode 5, Traffic Alert and Collision Avoidance System (TCAS), and surveillance cloaking capability into two United States Marine Corps (USMC) Boeing C-40A Clipper aircraft. This notice is not a solicitation, request for proposal, request for quotation, invitation for bid, or commitment by the Government to award a contract. The Government will not reimburse respondents for costs associated with preparing or submitting a response. Information received will be used to assess the availability of qualified sources, determine the extent of small-business capability, and inform the Government’s acquisition strategy. 2. Requirement Description The Government anticipates a requirement for systems engineering, avionics integration, and test support associated with incorporation of surveillance capability into two USMC Boeing C-40A Clipper aircraft. The anticipated place of performance is Naval Air Station Patuxent River, Maryland. Additional travel or support at other Government or contractor locations may be required, as identified in any future solicitation or statement of work. The anticipated effort includes engineering analysis, integration planning, interface assessment, configuration management, installation support, ground- and flight-test planning and execution, anomaly resolution, technical-data development, and technical program support. The effort requires integration of the following avionics equipment: APX-119-540 Transponder — P/N 4079100-0540 Digital Control Panel (DCP) — P/N 4087561-0503 KIV-79 Crypto Applique — P/N 4079080-0503 Personality Module (PM) — P/N 4088953-0501 TPA-100B Traffic Alert and Collision Avoidance System (TCAS) Computer — P/N 940-0351-010 3. Anticipated Scope Potential sources should be capable of providing the following, as applicable: Review and analyze aircraft-level, system-level, and equipment-level requirements. Develop or update systems-engineering artifacts, interface-control documentation, integration plans, test plans, test procedures, and test reports. Assess aircraft electrical, mechanical, software, data-bus, antenna, display, and avionics interfaces associated with the identified equipment. Support aircraft modification planning, installation, and integration activities. Provide configuration-management, engineering-change, and technical-data support. Develop and execute, or support execution of, ground- and flight-test activities. Document test results, discrepancies, corrective actions, and recommended resolutions. Support Government-directed airworthiness, certification, operational test, or other approval activities, as applicable. Participate in technical interchange meetings, program reviews, risk-management activities, and status reporting. 4. Requested Capability Statement Interested parties are requested to submit a concise capability statement addressing the following: A. Company Information Company name, address, CAGE Code, and Unique Entity Identifier, if applicable. Business size and socioeconomic status under NAICS 488190. Primary technical and contracting points of contact, including telephone number and email address. B. Relevant Experience Experience within the past five years supporting systems engineering, modification, integration, testing, or sustainment of Boeing 737-derived aircraft, military transport aircraft, or comparable aircraft platforms. Experience integrating Mode 5/Identification Friend or Foe, transponder, TCAS, surveillance, cryptographic, or comparable mission-avionics systems. Experience with the specific avionics equipment identified in this notice, if applicable. Up to three relevant completed or ongoing efforts, including a short description of the work performed, period of performance, customer type, and the respondent’s role. C. Technical Capability Available systems-engineering, avionics-engineering, aircraft-electrical-engineering, software-engineering, test-engineering, flight-test-support, configuration-management, and technical-data capabilities. Capability to support integration planning, aircraft modification activities, ground testing, flight testing, troubleshooting, and discrepancy resolution. Relevant facilities, test equipment, engineering tools, specialized personnel, and other resources available to support this effort. Any anticipated Government-furnished equipment, Government-furnished information, technical-data, facility-access, or other support requirements. D. Teaming and Acquisition Input Whether the respondent intends to participate as a prime contractor, subcontractor, or teaming partner. Potential teaming arrangements and anticipated subcontracting requirements. Recommended acquisition approach, contract type, estimated period of performance, and major schedule considerations. Significant technical, supply-chain, schedule, airworthiness, test-resource, data-rights, or other risks the Government should consider. 5. Submission Instructions Responses shall be submitted electronically in PDF format no later than 12:00 p.m. on Thursday, November 5, 2026, to: Will Dagenhart william.j.dagenhart.civ@us.navy.mil The email subject line shall read: “Sources Sought Response – USMC C-40A Mode 5/TCAS/Surveillance Cloaking Integration Support – [Company Name]” Respondents shall clearly identify proprietary information contained in their responses. Do not submit classified, export-controlled, or otherwise sensitive information unless specifically authorized and transmitted through an approved Government process. 6. Disclaimer THIS SOURCES SOUGHT NOTICE IS FOR PLANNING AND MARKET-RESEARCH PURPOSES ONLY. IT DOES NOT CONSTITUTE A SOLICITATION OR GUARANTEE THAT THE GOVERNMENT WILL ISSUE A SOLICITATION OR AWARD A CONTRACT. THE GOVERNMENT MAY USE INFORMATION RECEIVED TO DETERMINE THE AVAILABILITY OF CAPABLE SOURCES AND EVALUATE POTENTIAL SMALL-BUSINESS PARTICIPATION OPPORTUNITIES. | - | Market Research | 11/05/2026 |
***Start of Update 0013 Posted 20260930*** The purpose of this update is to issue Amendment 0008 to Solicitation N0001926R0018. The unit of measure in Section B SLIN 0113 is corrected. A fill-in is provided for FAR clause 52.232-7. A revised clause fill-in is provided for DFARS clause 252.204-7021. A draft contract in the new ePS contract writing system, conformed through Solicitation N0001926R0018 Amendment 0008, is provided to Offerors for informational purposes. The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0008; N0001926R0018ConfThruAmend0008; Draft ePS Contract Conformed through Amend 0008 20260929; The Proposal due date remains closed.***End of Update 0013 Posted 20260930*** ***Start of Update 0012 Posted 20260826*** The purpose of this update is to provide a response to question 24. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: C130 Depot MRO RFP N0001926R0018 Q_A 1-24 20260826. The proposal due date remains closed. The response date of 20260827 is provided in order to allow for posting a response to question 24.***End of Update 0012 Posted 20260826*** ***Start of Update 0011 Posted 20260708*** The purpose of this update is to issue Amendment 0007 to Solicitation N0001926R0018 and to provide a response to questions 22-23. The Labor Hour (LH) and Cost Reimbursable (Cost) CLINs that were revised to Firm-Fixed-Price (FFP) under Amendment 0004 are reverted back to Labor Hour (LH) and Cost CLINs. Section A Preamble is revised. Clauses and Provisions are revised to account for the reinsertion of LH and COST contract types into this solicitation. Clause H-1 Exemptions For Nontraditional Defense Contractors is incorporated. Section L, 4.1 Electronic Proposal Submission, Volume 1 Executive Summary/Contract Administration, and Volume 5 Price are revised. Section M, D. Price is revised. Attachment 1, Performance Work Statement (PWS) dated 19 May 2026 is replaced with Attachment 1, PWS dated 06 July 2026. Section L Attachment L-1 Vol 1 L-1 KA Tables_04132026 is replaced with Section L Attachment L-1 Vol 1 L-1 KA Tables_07062026. Section L Attachment L-6 Vol 5 OPS_05192026 is replaced with Section L Attachment L-6 Vol 5 OPS_07062026. The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0007; N0001926R0018ConfThruAmend0007; Attachment (01) PWS for C-130 Depot MRO 20260706; Attachment (01) PWS for C-130 Depot MRO 20260706 TrackChanges; Att L-1 Vol 1 L-1 KA Tables_07062026; Att L-6 Vol 5 OPS_07062026; and C130 Depot MRO RFP N0001926R0018 Q_A 1-23 20260706. The Proposal submission timeline remains unchanged. ***End of Update 0011 Posted 20260708*** ***Start of Update 0010 Posted 20260701*** The purpose of this update is to issue Amendment 0006 to inform Industry of a forthcoming amendment that will revert the Labor Hour (LH) and Cost Reimbursable (Cost) CLINs that were revised to Firm-Fixed-Price (FFP) under Amendment 0004 back to Labor Hour (LH) and Cost CLINs. As such, the proposal due date for the Pre-Requisite (Volume 2), Technical (Volume 3) and Past Performance (Volume 4), portions of the proposal, remain unchanged at no later than 2:00PM Eastern Time on 06 July 2026. The proposal due date for Executive summary/Contract Administration (Volume 1), Price (Volume 5), and Small Business (Volume 6) is changed to no later than 2:00PM Eastern Time on 13 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0006 ***End of Update 0010 Posted 20260701*** ***Start of Update 0009 Posted 20260611*** The purpose of this update is to issue Amendment 0005 to Solicitation N0001926R0018 to extend the proposal due date from 22 June 2026 to not later than 2:00PM Eastern Time on 6 July 2026. ***End of Update 0009 Posted 20260611*** ***Start of Update 0008 Posted 20260609*** The purpose of this update is to provide a response to questions 15-21. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: C130 Depot MRO RFP N0001926R0018 Q_A 1-21 20260609. The proposal due date remains unchanged at not later than 2:00PM Eastern Time on 22 June 2026. ***End of Update 0008 Posted 20260609*** ***Start of Update 0007 Posted 20260527*** The purpose of this update is to provide a response to questions 9-14. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: C130 Depot MRO RFP N0001926R0018 Q_A 1-14 20260527. The proposal due date remains unchanged at not later than 2:00PM Eastern Time on 22 June 2026. ***End of Update 0007 Posted 20260527*** ***Start of Update 0006 Posted 20260522*** The purpose of this update is to issue Amendment 0004 to Solicitation N0001926R0018. CLINS/SLINS previously identified as Labor Hour (LH) and Cost Reimbursable (COST) are revised to Firm-Fixed-Price (FFP). Section A Preamble is revised. SLINs 0002AG, 0102AG, 0002AH, and 0102AH are removed from the solicitation and marked as RESERVED. Clause 52.222-90 Addressing DEI Discrimination by Federal Contractors is incorporated. Clause 252.211-7003 Item Unique Identification and Valuation is incorporated. Clauses and Provisions are revised to account for removal of LH and COST contract types from this solicitation. Section L, 4.1 Electronic Proposal Submission, Volume 1 Executive Summary/Contract Administration, Volume 2 - Pre-Requisite, Volume 3 Technical, and Volume 5 Price are revised. Section M, D. Price is revised. Attachment 1, Performance Work Statement (PWS) dated 26 March 2026 is replaced with Attachment 1, PWS dated 19 May 2026. Attachment 5, Airfield Requirements dated 14 Jan 2026 is replaced with Attachment 5, Airfield Requirements dated 13 April 2026. Attachment 6, Facility Requirements dated 14 Jan 2026 is replaced with Attachment 6, Facility Requirements dated 13 April 2026. Section L Attachment L-1 Vol 1 L-1 KA Tables_0114206 is replaced with Section L Attachment L-1 Vol 1 L-1 KA Tables_04132026. Section L Attachment L-2 Vol 3 CRM_01142026 is replaced with Section L Attachment L-2 Vol 3 CRM_04132026. Section L Attachment L-6 Vol 5 OPS_01212026 is replaced with Section L Attachment L-6 Vol 5 OPS_05192026.The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0004; N0001926R0018ConfThruAmend0004; Attachment (01) PWS for C-130 Depot MRO 20260519; Attachment (01) PWS for C-130 Depot MRO 20260519 TrackChanges; Attachment (05) Airfield Requirements_04132026; Attachment (05) Airfield Requirements_04132026 TrackChanges; Attachment (06) Facility Requirements_04132026; Attachment (06) Facility Requirements_04132026 TrackChanges; Att L-1 Vol 1 L-1 KA Tables_04132026; Att L-2 Vol 3 CRM_04132026; Att L-6 Vol 5 OPS_05192026.The Proposal submission timeline is reopened. Proposals are due not later than 2:00PM Eastern Time on 22 June 2026. Offerors who submitted proposals in response to the RFP Amendment 0003 may submit change pages in lieu of submitting a complete proposal package in response to Amendment 0004. The change pages shall clearly identify new, removed and/or modified content. The revised Attachment L-1 KA Tables dated 13 April 2026 and Attachment L-6 OPS dated 19 May 2026, shall be submitted in its entirety. The Offerors response shall include a statement: The change pages and the remainder of the proposal submitted in response to Amendment 0003 constitutes the Offerors proposal in its entirety in response to Amendment 0004. ***End of Update 0006 Posted 20260522*** ***Start of Update 0005 Posted 20260327*** The purpose of this update is to issue Amendment 0003 to Solicitation N0001926R0018 and to provide a response to questions 7-8. This amendment removes SLIN 0002AD and 0102AD from the solicitation and marks these SLINs as RESERVED. This amendment replaces Attachment 1, Performance Work Statement (PWS) dated 17 March 2026 with Attachment 1, PWS dated 26 March 2026 included with this Amendment in order to remove requirements from paragraph 3.4d and paragraph 3.4.4. The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0003; N0001926R0018ConfThruAmend0003; Attachment (01) PWS for C-130 Depot MRO 20260326; and C130 Depot MRO RFP N0001926R0018 Q_A 1-8 20260327. The proposal due date remains unchanged at not later than 2:00 pm Eastern Time on 31 March 2026 ***End of Update 0005 Posted 20260327*** ***Start of Update 0004 Posted 20260317*** The purpose of this update is to issue Amendment 0002 to Solicitation N0001926R0018 and to provide a response to questions 4-6. This amendment replaces Attachment 1, Performance Work Statement (PWS) dated 14 January 2026 with Attachment 1, PWS dated 17 March 2026 included with this Amendment in order to remove requirements from paragraph 1.2 and paragraph 3.2.4. The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0002; N0001926R0018ConfThruAmend0002; Attachment (01) PWS for C-130 Depot MRO 20260317; and C130 Depot MRO RFP N0001926R0018 Q_A 1-6 20260317. The proposal due date remains unchanged at not later than 2:00 pm Eastern Time on 31 March 2026 ***End of Update 0004 Posted 20260317*** ***Start of Update 0003 Posted 20260303*** The purpose of this update is to issue Amendment 0001 to Solicitation N0001926R0018 and to provide a response to question 3. This amendment incorporates a provision, clause, and revision to Section L associated with Cybersecurity Maturity Model Certification (CMMC) requirements. The following documents are posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: N0001926R0018Amend0001; N0001926R0018ConfThruAmend0001; and C130 Depot MRO RFP N0001926R0018 Q_A 1-3 20260303. The proposal due date remains unchanged at not later than 2:00 pm Eastern Time on 31 March 2026 ***End of Update 0003 Posted 20260303*** ***Start of Update 0002 Posted 20260220*** The purpose of this update is to provide a response to question 2 received from industry. Formal RFP Question and Answer file C130 Depot MRO RFP N0001926R0018 Q_A 1-2 20260220 is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website and will be accessible with the formal solicitation and solicitation attachments after Offerors are granted access following the procedures set forth under Access to Solicitation/ Solicitation Attachments in the posting dated 29 January 2026. ***End of Update 0002 Posted 20260220*** ***Start of Update 0001 Posted 20260209*** The purpose of this update is to provide a response to question 1 received from industry. Formal RFP Question and Answer file C130 Depot MRO RFP N0001926R0018 Q_A 1 20260209 is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website and will be accessible with the formal solicitation and solicitation attachments after Offerors are granted access following the procedures set forth under Access to Solicitation/ Solicitation Attachments in the posting dated 29 January 2026. ***End of Update 0001 Posted 20260209*** ***Start of Notice Description 20260129*** The Naval Air Systems Command (NAVAIR), on behalf of PMA-207 (Tactical Airlift Program Office), posts formal Request for Proposal (RFP) N0001926R0018 for C-130 Depot Maintenance Repair and Overhaul (MRO) services. This notice is a follow-up to the C-130 MRO DRAFT Request for Proposal Notice N0001925R0024. NAVAIR intends to award a contract to a company incorporated in the United States with a single source Indefinite Delivery Indefinite Quantity (IDIQ) structure with a five-year base ordering period and an option ordering period of five years via a Federal Acquisition Regulation (FAR) Part 15 full and open competition. Planned award is during first quarter of Government Fiscal Year (FY) 2027. Proposals are due not later than 2:00 pm Eastern Time on 31 March 2026 as specified in Block 9 of the SF 33. However, Offerors are encouraged to submit portions of their proposal associated with past performance 14 calendar days prior to that submission date. See Section L paragraph 4.1 of the solicitation document for details. The solicitation, including all attachments, is posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. Companies that had requested and been granted access to the DRAFT Request for Proposal under Notice N0001925R0024, have already been provided access in PIEE to the formal Request for Proposal (RFP) under Notice N0001926R0018. The Government may also provide separately, via the dissemination method described below, technical documents to assist Offerors with developing their proposals. Potential Prime Contractors that had already requested and been provided the technical documents with the date 20260123 on the Technical Document List tab of the provided index file, already have the latest version and should not request the technical documents again. Access to Solicitation/ Solicitation Attachments (For Companies that had not already requested and been granted access to the DRAFT Request for Proposal under Notice N0001925R0024) Solicitation documents may contain Controlled Unclassified Information (CUI). Requests for access to the solicitation and solicitation attachments in the Solicitation Module of the U.S. Government PIEE website must be in writing and include: Company name, address, and Commercial and Government Entity (CAGE) Code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). Upon review of the potential Offerors (including subcontractors) written request and verification of Offerors status in SAM.gov, the Government will provide the Offeror access to the Solicitation and Solicitation Attachments in the Solicitation Module of the U.S. Government PIEE website. Each potential Offeror (including subcontractors) shall transmit via email its written request for access to solicitation and solicitation attachments in the Solicitation Module of the U.S. Government PIEE website, to Contract Specialist Mr. Gregory Webster (gregory.j.webster8.civ@us.navy.mil). Access to Other Technical Documents (Potential Prime Contractor Requests Only. For Potential Prime Contractors that had not already requested and been provided the technical documents with the date 20260123 on the Technical Document List tab of the provided index file.) Technical documents are available to assist with developing proposals. Some of the technical documents may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to technical documents must be in writing and shall include: Statement that the company intends to submit as a prime contractor; A certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#joint-certification-program-jcp-office; Company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each Offeror shall transmit via email its written request for access to the technical documents, with the certified DD Form 2345 attached to the email, to the aforementioned Contract Specialist. Prior to granting access to technical documents, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Potential prime contractors may initially request access to the solicitation and solicitation attachments following the procedure set forth above, and submit an additional request for technical documents after obtaining the certified copy of a DD Form 2345. Each potential Offeror shall certify that no dissemination of any export-controlled solicitation attachments and technical documents containing CUI subject to this requirement will occur in a manner that would violate applicable export control laws and regulations via submittal of their approved DD Form 2345. Upon review of the Offerors written request and approved DD Form 2345, the Government will provide the Offeror access to the technical documents via the DoD SAFE website (previously AMRDEC) - https://safe.apps.mil/. The data custodian listed in Block 3 of DD Form 2345 will receive a link, via e-mail, to the package download page as well as a password. The password is unique for each recipient and will be disabled once SAFE detects that the user successfully downloaded each file within the package. Distribution of CUI by an Offeror to that Offerors team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the Offeror and shall be limited to a need to know basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls and distribution statements associated with the document.***End of Notice Description 20260129*** | - | Solicitation | 10/06/2026 |
Additional Details
Solicitation Number
FA286027R0002
Archive Date
Oct 27, 2026
Office Address
JB ANDREWS, MD, 20762-7001