Notice ID: aa192d006af74e1fbf686bff35214c61Combined Synopsis/Solicitation
Barnes Center AV Booth Maintenance Services; Amendment 0003
Archived on September 20, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM UTC−05:00
- Posted
- August 26, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 811210: Electronic and Precision Equipment Repair and Maintenance
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- FA3300 42 CONS CC
- Place of performance
- Montgomery, AL, 36113
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- FA330023Q0077
- Notice ID
- aa192d006af74e1fbf686bff35214c61
Description
Amendment 0003 - This solicitiation as been amended. The following changes have been made: Two FINAL additional Questions/Responses: Engineer estimate/estimated budget price? We are not providing a magnitude description on this commercial service. This is what your pricing will provide in the RFQ based on the performance work statement (PWS). Is the maintenance contractor required to provide service units if an AV equipment breakdown? If yes, can this be billed separately? New equipment will be billed separately and as needed; Please see PWS para. 4.0 4.2. In order to replace obsolete, non-repairable Out of Warranty equipment, the Contractor shall provide the COR with replacement options and three estimates from government approved purchase sources for review/approval before new equipment is purchased and installed. No other changes have been made. Amendment 0002 - This solicitiation as been amended. The following changes have been made: 1. Answer to the following questions: Quantity of all parts on attachement 3 and inventory of all AV rooms. Date of part installations This is the answer to both questions and background summary: The most important factor about the requirement is that the maintenance vendor submitting a proposal will have the certifications and knowledge to have all the parts work together and for the system to work. Each room is using Creston Switches. A 16 port Crestron switch, a 32 port Crestron switch, and a 26 port Creston Switch respectively. The Barnes Center is waiting for new parts to complete a phased upgrade. Original part installs were: Small and Large Auditorium 2017, Conference room 2022. Exact quantities of all parts in the AV rooms are unavailable because new parts are always being added and updated to inventories by AV maintenance contractor personnel when installed. Since original install date, there have been pieces of equipment that have been broken and replaced, functions not needed and removed. Some of the equipment has been replaced with similar equipment with the same function. All new parts purchased for the AV rooms have agreements with the part vender that they will assist the maintenance vender to update the equipment list. 2. No other changes have made. Amendment 0001 - This solicitiation as been amended. The following changes have been made: 1. Addition of attachment 3 - Auditorium Inventory 2. Answers to the following questions: What is the current control system? Crestron programming language. Does the Government have the existing programming code for the current control system? Yes 3. No other changes have made. The Barnes Center at Maxwell AFB, AL has a non-personal service requirement for audio/visual (AV) system maintenance service. The contractor will provide the Barnes Center at Maxwell AFB, AL. with a one-year firm-fixed-price contract for all required on-site maintenance and service for the professional grade audio/visual (A/V) systems in the Small Auditorium, Large Auditorium, and the Senior Noncommissioned Officer Academy (SNCOA) Conference Room located in Bldg. 1143 at Maxwell-Gunter Annex, AL. Contract Services are intended and may include up to four (4) option periods for AV Maintenance Services (IAW) the Performance Work Statement (PWS). See four (4) attachment documents for full instructions and requirement details. 1. Attachment 1 - Performance Work Statement (PWS) AV Booth Maintenance Service 2. Attachment 2 - Provisions and Clauses 3. Attachment 3 - Auditorium Inventory 3. Combo - AV Booth Maintenance Services
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
FA330023Q0077- Combined Synopsis
- 6×Combined SynopsisCurrentAug 18, 2023
Barnes Center AV Booth Maintenance Services; Amendment 0003
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Replacement of two Advanced Industrial Measurement Systems (AIMS) Metrology Coordinate Measuring Machines located at the Anniston Army Depot. | - | Solicitation | 12/12/2025 |
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | - | Market Research | 12/07/2026 |
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | - | Market Research | 12/07/2026 |
This solicitation notice is to announce the intent of the Air Force Sustainment Center (AFSC/PZA-Hill) toaward a sole-source, Indefinite Delivery/Indefinite Quantity (IDIQ) contract to Elbit America, Inc. for the repair of twenty-five(25) National Stock Numbers (NSNs) supporting the F-16 and A-10 aircraft platforms. The proposed contract will have a10-year period of performance, including a five-year base period and five one-year options, with an estimated total value of$98,076,893.40. The designated North American Industry Classification System (NAICS) code is 811210, and the ProductService Code (PSC) is J059.Description of Requirement: The requirement is for comprehensive diagnostics, testing, andrepair services for twenty-five (25) highly complex Line Replaceable Units (LRUs) and Shop Replaceable Units (SRUs).These components, which include items such as Display Units, Processors, Digital Video Recorders, and Circuit CardAssemblies, are critical to the operational readiness, navigation, and mission capabilities of the F-16 and A-10 fleets. Thecontractor shall provide all necessary parts, labor, facilities, and engineering support to restore the assets to a fully mission capableand flight-worthy condition. Justification for Sole Source: Elbit America, Inc. is the Original Equipment Manufacturer(OEM) and retains exclusive ownership of the proprietary technical data, manufacturing drawings, specialized diagnosticsoftware, and Special Test Equipment (STE) required to perform these repairs. The Government does not own the completedata rights to competitively source this requirement. Market research has confirmed that no other sources possess therequisite capabilities, approvals, or proprietary data to perform these highly specialized services. 1260-01-517-4127WF1260-01-543-9004FJ 1260-01-629-8084WF 1280-01-517-2720WF 1280-01-600-0813WF 1280-01-600-0988WF1290-01-523-9628WF 1290-01-592-8404WF 5836-01-520-4682WF 5836-01-622-0444WF 5836-01-615-31365836-01-620-7418 5975-01-576-1361WF 5998-01-577-5206WF 5975-01-624-8392WF 5998-01-559-1236WF5998-01-559-1237WF 5998-01-559-1240WF 5998-01-559-1241WF 5998-01-559-3113WF 5998-01-592-8704WF5998-01-616-4384 7025-01-509-3748 7025-01-516-1147WF 5998-01-623-8811 | - | Solicitation | 11/30/2026 |
Trumpf Pilz Programming Service 76 MXSG Unit request a one-time contract for Reprogramming the Pilz Module. TrumaBend V170X / SN: B0105A0093 The Contractor shall program and configure the integrated Pilz safety controller IAW PWS | - | Combined Synopsis | 11/06/2026 |
Additional Details
Solicitation Number
FA330023Q0077
Archive Date
Sep 20, 2023
Office Address
MAXWELL AFB, AL, 36112-6334