GovChime
Notice ID: f87e1728b2474adfadf3901341ae33bfSources SoughtArchived

26 TON Rooftop HVAC Unit

Archived on September 20, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:30 PM MDT
Posted
August 28, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
423730: Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA4855 27 SOCONS LGC
Place of performance
Cannon AFB, 88103
Last updated
Nov 9, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA485525Q0054
Notice ID
f87e1728b2474adfadf3901341ae33bf

Description

Description is listed in an attached word document.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • 997e9517-c618-47b9-91d7-fc84d2ae86fb.jpg

    180 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    26 TON Rooftop HVAC Unit

    Notice f87e1728b2474adfadf3901341ae33bf on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The U.S. Embassy in Guatemala requires the purchase and delivery of air filters for Air Handling Units (AHUs), including all applicable service fees. The filters will be used to support the operation and maintenance of the Embassy's heating, ventilation, and air conditioning (HVAC) systems and to ensure proper indoor air quality and equipment performance.
-Solicitation08/14/2026
This is a request for information (RFI) for market intelligence and for informational purposes only. This announcement does not constitute a solicitation or a request for proposal (RFP), and no solicitation is currently available. Participation in this RFI is strictly voluntary. The Government will not be obligated to award any agreement or contract because of this RFI, nor will it reimburse respondents for any costs associated with the preparation or submission of information. Submitting a response will not affect a firm’s ability to submit a proposal should a formal solicitation be issued in the future. Please note that while Other Transaction Authority is not subject to FAR based small business regulations, this NAICS code is provided for market research to help the Government understand the size and demographics of the interested industrial base. PROGRAM/PROJECT OVERVIEW: The U.S. Air Force 377th Contracting Division has a requirement to execute the construction and technical redesign requirements for the demolition of three substations and new construction of two upgraded substations. The services requested will include new 12.47 kV distribution systems. The primary purpose and objective of these projects are to rapidly upgrade the existing infrastructure, meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. The Government is evaluating the feasibility of executing these requirements under one award via Progressive Design-Build (PDB) utilizing an Other Transaction (OT) Agreement under the statutory authority of 10 U.S.C. § 2808a. Summaries of projects for this acquisition strategy are as follows: - MHMV200009 – Repair Substation 9 and Feeders: The primary objective of the Repair Substation 9 and Feeders project is to design and construct a fully operational, modern power distribution asset, upgrading the existing infrastructure to meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. This goal will be achieved by establishing the new substation facility within a defined 100ft x 150ft footprint directly south of the existing location, and installing all-new substation components, security fencing, distribution poles, switching gear, and conductors. The project also aims to complete the systematic teardown and removal of all retired infrastructure to restore the original site. - MHMV 120009 – Remove Substation 23 & Connect Loads to Substation 24A Feeder 5: The project entails the design and construction services required to remove Substation 23 & connect loads to Substation 24A Feeder 5 located on KAFB. The primary purpose and objective of this project is to upgrade the existing infrastructure of Substation 24A Feeder 5 to meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. - MHMV080002 – Demo Substation 3, Rebuild Substation 10 and Distribution System: The primary goal of the Demo Substation 3, Rebuild Substation 10 and Distribution System project is to safely decommission and demolish Substations 3 and 10 and design, construct, and commission a modern, consolidated Substation 10 rated at 10,000 KVA (10/12/14 MVA). This infrastructure upgrade will replace aged, unserviceable assets with a resilient, high-capacity substation and an underground distribution backbone designed to eliminate single points of failure and modernize base electrical infrastructure. Included in this notice are the attachments of the Scope of Services with technical documents for more detailed information on the nature of the work. INFORMATION REQUESTED: Interested industry partners are requested to respond to the following questions to help shape the final acquisition strategy. Please limit your responses to no more than 5-pages addressing the following questions – - Company Profile: Business Name Address Point of Contract (Name, Title) Phone Number Email Address Cage Code & UEI - Relevant Experience: Please provide your relevant experience as it relates to performing multiple project in similar size, scope, and complexity to this requirement. Summarize performance clearly and factually, along with project locations and the projects customer(s). Do not submit proprietary trade secrets, protected technologies, or classified information in your response. All feed-back received will be handled as public market research to shape the Government's final acquisition approach. - Feedback on the Acquisition Strategy & Alternatives: OTA Experience – Describe your firm’s previous experience, if any, executing projects utilizing OTA. What project characteristics make PDB OTA particularly advantageous or disadvantageous for this requirement? Describe your experience executing Progressive Design-Build, Construction Manager at Risk (CMAR), or other highly collaborative delivery methods where designer and builder worked collaboratively with the owner before locking in a Guaranteed Maximum Price (GMP). Does the proposed PDB-OTA strategy incentivize your firm to participate? Why or why not? Are there alternative acquisition strategies, commercial phasing arrangements, or risk-sharing terms that the Government has not considered that would yield a higher quality facility, faster delivery, or lower cost? The Government welcomes candid industry feedback and recommendations regarding commercial practices, agreement terms, project phasing, risk sharing, governance, pricing approaches, and other considerations that could improve successful execution of these projects under 10 U.S.C. § 2808a. Interested firms are encouraged to add themselves to the Interested Vendors List associated with this announcement on SAM.gov to receive future updates. Please submit your responses to the Government Point of Contact listed below by the response date listed.
-Market Research11/19/2026
Please see the attachments provided.
-Combined Synopsis11/20/2026
16 September 2026 - Proposal Submission Reminder When submitting your proposal in the PIEE Solicitation module, please adhere to the requirements in Section L Paragraphs 2.1.3, 7.1.1, and 7.2.1 and the instructions in the Standard Form (SF) 30 (Amendments 0001 and 0002). Both Amendments will need to be acknowledged IAW SF 30 Block 11, in addition to sending the SF33 contract documentation. Nothing has been updated in the solicitation. The Government has noticed during initial review of submissions that Amendment acknowledgment may have been overlooked. 1 September 2026 – FA8809-26-R-B002 Amendment 0002 The purpose of Amendment 0002 is to update Section L&M, in addition to updates to Attachment 1 – HADES Basic IDIQ PWS, Attachment 2 – Ordering Instructions, Attachment 3 - Award Fee Plan, Attachment 8 - Rights in Data, and Exhibit A – HADES IDIQ CDRLs. The ceiling for the IDIQ has also been increased to $389M. The ceiling increase is due to updated assumptions regarding possible future work on the HADES contract. Additionally, Questions and Answers received since Amendment 0001 are included with this posting. Two documents are included in the bidder’s library regarding posting an offer on the PIEE Solicitation module. Please note that the PIEE Solicitation Module will allow updates to offers. Offerors Past Performance volume early submittal will not prevent proposal updates or modification, allowing for the remainder of the proposal volumes to be submitted by the closing date. 20 August 2026 - FA8809-26-R-B002 Amendment 0001 The purpose of Amendment 0001 is to make updates and clarifications to the solicitation. Updated documents include: Section J Attachment 1 HADES Basic IDIQ PWS for administrative changes Section J Attachment 2 Ordering Instruction for administrative changes Section J Attachment 3 Award Fee Plan - change to Annex 2 regarding small business Section J Attachment 8 Rights in data to correct contradiction with section L Exhibit A HADES CDRLS Section L and M for administrative changes and clarifications. Additionally, the Bidder's libarry has been updated with the following documents: Bidder's Library Update 20 August 2026 HADES RFP Q&A Amendment 0001 Pursuant to RFO 15.203, this RFP communicates Government requirements to prospective contractors and solicits proposals for the Hybrid Architecture and Development for Experimental Systems (HADES) program. The program is being executed by the Space Systems Command (SSC), Innovation and Prototyping Delta, Kirtland Air Force Base, New Mexico. The HADES program provides support for satellite ground system and satellite operations center engineering, development, integration, and sustainment, and associated support services primarily at, but not limited to, the Research, Development, Test, and Evaluation (RDT&E) Support Complex (RSC) at Kirtland Air Force Base, Albuquerque, New Mexico. The anticipated period of performance of this IDIQ includes a base period of three (3) years with four (4) option periods for one (1) year each, making a total ordering period of 7 years. The total ceiling for this contract is $300M. The Government anticipates a single award IDIQ Cost Plus Award Fee (CPAF) contract type. Vendors are highly encouraged to register in the Procurement Integrated Enterprise Environment (PIEE) Solicitation module. Proposal submission through PIEE is required. The Vendor Registration Guide is attached to this RFP. Vendors must be registered in System for Award Management (SAM) prior to the award of any contract. You may register at www.sam.gov. The Government requests proposal submissions on or before 17 September 2026, 1:00 PM MOUNTAIN TIME Please direct all questions and inquiries regarding this RFP to the PCO and Contract Manager at john.purcell.3@spaceforce.mil and alyssa.phillips.4@spaceforce.mil.
-Solicitation09/17/2026
Air Force Research Laboratory (AFRL) Request for Information for High Hypersonic Reentry Flight Experiment Program Introduction Air Force Research Laboratory (AFRL) is gathering information for future partnering with industry and other government agencies to develop high-cadence, recoverable, reliable, cost-effective orbital and hypersonic reentry experiment platforms. These platforms offer exposure to extreme reentry environments with payload recovery post-fight for Technology Readiness Level (TRL) maturation and Science & Technology (S&T) advancement. AFRL aims to advance novel, innovative research areas that address capability, technology, or scientific gaps for hypersonic reentry vehicles and environments. In addition to existing orbital and hypersonic platforms, AFRL aims to further develop hypersonic testing infrastructure and platforms. Near-future capabilities include non-ballistic trajectories and high-acceleration-load (50+ g’s) flight conditions. AFRL has the following reentry experimentation priorities (not in priority order): Promote cutting-edge research to enhance the Department of War's (DOW) ability to address future science and technology (S&T) requirements for hypersonic reentry. This involves developing recoverable flight payloads designed to withstand extreme hypersonic conditions above 7.5km/s and high-acceleration forces exceeding 50 g’s including, but not limited to: Guidance, Navigation, and Control Technologies with the potential to be radiation hardened/survivable (operate through, circumvent and recover, etc.) – accelerometers, gyroscopes, navigation aids for operating in a GPS denied environment (stellar, radar, optical, etc.), and new SW algorithms for relevant hypersonic flight environments Avionics Components with the potential to be radiation hardened/survivable (operate through, circumvent and recover, etc.) – flight computers, processors, actuators, etc. Flight-Environment Sensors – heat flux, temperature, pressure, shock, vibration, acceleration, attitude, altitude, material recession, plasma, etc. Novel Thermal Protection System (TPS) materials and manufacturing techniques, including, but not limited to hot-structure TPS Integrated Systems – e.g. flight computer with IMU with navigation aid Vehicle Diagnostic Sensors and Algorithms Communication Capabilities – e.g. telemetry Autonomous precision landing Ejectables on orbit or reentry Identify reentry testbed capabilities that improve Department of War’s (DOW’s) ability to meet hypersonic reentry environment S&T needs by providing recoverable test platforms that operate in relevant hypersonic environments: Required Characteristics (not all simultaneously required) Minimum speed 7.5 km/s Acceleration loads of at least 50 g’s Minimum 2000° C thermal load Minimum heat flux in flight of 350 W/cm2 Support at least a 40 x 40 x 40 cm payload volume and 5+kg mass Host-provided power Additional Useful Characteristics Ability to maneuver at hypersonic speed, minimum 1.8km/s Ability to mount external material samples with sensor instrumentation Ability to achieve 50+ g’s acceleration load during test Ability to achieve heat flux exceeding 400+ W/cm2 Ability to provide direct line-of-sight ground observation during terminal-phase flight Collect data to address knowledge gaps in existing and new computational models (e.g., reentry temperature profile, shock, vibration, plasma profile, RF blackout, etc.) AFRL is requesting information on technologies which have completed bench-level testing and are ready for prototype reentry experimentation (notionally TRL 4-5). AFRL is also requesting information on already-developed reentry vehicles available for flight opportunities in the near term (less than 12 months). Suitable technologies or vehicles may be identified for follow-on agreements to further develop hypersonic testing infrastructure and platforms that address capability, technology, or scientific gaps for hypersonic reentry vehicles and environments. Follow-on agreements could include Cooperative Research and Development Agreements, Small Business Innovative Research contracts, FAR-based contracts, Other Transaction Authority contracts, etc. This request for information is for informational purposes only and does not constitute a commitment by the U.S. Government to award a contract, make any purchases, or take any other action. Application and Submission Information Submission Format: Submissions should consist of a White Paper and an optional Experiment and Materials Data Sheets. The White Paper should be divided into the sections described below and listed in the same order. Some sections are denoted as “if applicable” or “optional.” To streamline the process, the White Papers are limited to four (4) pages using 11-point Times New Roman font. Graphics must be legible without zoom (>10-point font) and do not count against page count limitation. A template is provided for the Experiment and Materials Data Sheets. Theses documents are optional and do not count against page count limitation. Experiment and Materials data sheets may be marked CUI once completed. One (1) additional page may be allocated for references and does not count against page count limitation. Citations shall be in accordance with the Institute of Electrical and Electronics Engineers (IEEE) Reference Guide. (https://journals.ieeeauthorcenter.ieee.org/your-role-in-article-production/ieee-editorial-style-manual/) No other materials, including letters of advocacy, will be considered or reviewed. Submissions that do not meet the requirements above may not be considered or retained for market research purposes. This request for information is for informational purposes only and does not constitute a commitment by the U.S. Government to award a contract, make any purchases, or take any other action. Submitters should address the following: White Paper: Mission Relevance Project alignment with priorities listed in this document Warfighter, scientific and/or technological gaps addressed through this work Advancement of future hypersonic S&T priorities Estimated TRL before and after flight testing and justification (Payloads only) Payload/Experiment Overview Technology’s current use and novel advancements Barriers to wider use of the proposed technology Expected maturation of technology from reentry testing Other relevant existing technology (Platforms only) Test Platform Overview Vehicle’s current and projected capabilities and expected (or known) environments TRL Anticipated commercial application (if applicable) Technical Approach and Objectives Description of technical approach and objectives of this experiment or test Hypothesis and test configuration Outline of design and development plan for the payload Assessment of additional development necessary for transition to DOW acquisition Identification of major technical obstacles to achieving objectives Programmatic Approach and Objectives Description of programmatic approach and objectives of this experiment or test Reasonable ROM cost estimates, development/procurement/integration schedules, and additional development and engineering requirements Research Path Opportunity Description of future research opportunities and technology transition paths resulting from successful flight test Path to Strategic-Grade Radiation Hardness/Survivability (If applicable) Description of technology potential to be radiation hardened/survivable (operate through, circumvent and recover, etc.) Experiment and Materials Data Sheets optional): Optional data sheet for proposed payload. See the template provided for more detail. There are additional templates for external payloads and test platforms. Submission Process This overarching request for information has no end date and is in effect until it is closed or rescinded, but may be reviewed and updated as needed. White Papers, Data Sheets, and questions should be submitted to the Neutron STAR Org Mailbox. Documents containing CUI should be properly marked and submitters should request a DoD SAFE drop off link via the Neutron STAR Org Mailbox: afrl.rvkb.afrlneutronstardms@us.af.mil; Addressed to the ‘Prometheus Team’ Responses to this request will be tracked, managed, and otherwise documented by the aforementioned Prometheus Team, contracting officials, and/or support teams. Responses or feedback to industry will not be provided a result of the RFI. Disclaimer This RFI is issued solely for information-gathering and planning purposes. It is not a solicitation or a promise to issue a solicitation. This RFI does not constitute a commitment by the U.S. Government to award a contract, make any purchases, or take any other action. The information obtained as a result of this RFI may inform the Government's future requirements, but no specific procurement action is guaranteed as a result of this request. Participation in this RFI is entirely voluntary, and responders are under no obligation to submit information. The U.S. Government will not reimburse costs incurred by respondents in connection with this RFI. This includes, but is not limited to, costs associated with preparing or submitting responses, participating in meetings or demonstrations, or responding to subsequent requests for clarification. The Government reserves the right to use or not use any information provided by respondents in its sole discretion. Submission of a response to this RFI or any related discussions or exchanges with the Government does not create a binding agreement, obligation, or right for either party. Responding to this RFI will not adversely affect consideration for any future procurement or preclude respondents from participating in any subsequent solicitations. Responders should avoid including proprietary, confidential, or sensitive information in their submissions, as RFI responses will not be treated as privileged or restricted in nature. If proprietary information must be included, responders are responsible for clearly marking such information to ensure proper handling. This RFI is for market research purposes only. Any information provided is subject to verification and may be used in developing future acquisition strategies or solicitations. By voluntarily submitting information, respondents acknowledge and accept the terms of this disclaimer.
-Market ResearchOpen

Additional Details

Solicitation Number

FA485525Q0054

Archive Date

Sep 20, 2025