Notice ID: c9e7318574b9316b507575097a8755d7Award NoticeAwarded
Turbine Generator #5
Awarded on May 1, 2019. Full description on SAM.gov.
Awarded tounder FA500419CA009 (source: SAM.gov award notice)• $1.8M
Overview
- Posted
- May 3, 2019
- Notice type
- Award Notice
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of War
Notice details
- Place of performance
- 2310 Central Ave, Bldg 2258, Eielson Afb, AK, 99702
- PSC
- J: MAINT, REPAIR, REBUILD EQUIPMENT
- Last updated
- Dec 4, 2025
- Award date
- May 1, 2019
- Award amount (SAM.gov award notice)
- $1.8M
Identifiers
- Solicitation number
- FA500419BA007
- Notice ID
- c9e7318574b9316b507575097a8755d7
- Award number (PIID)
- FA500419CA009
Description
---ELECTRONIC BIDS WILL NOT BE ACCEPTED--- This project is to tear down, inspect, clean and repair turbine-generator #5 and auxiliary equipment at Eielson Air Force Base's Central Heat and Power Plant (CH&PP). In addition, upgrade the electronic governor and vibration monitoring system. Turbine-Generator #5 is a 10 MW IMO-DeLaval steam turbine coupled to an Electric Machinery generator, installed in 1987. Preparation of technical notes and tear-down/repair reports will be required. All work is to be done at Eielson AFB, Alaska. The Government is contemplating a Firm Fixed Price (FFP) Sealed Bid contract. IAW FAR 36.204(f): The estimated magnitude is between $1,000,000 and $5,000,000 This posting is an Invitation for Bids. Respondees are advised that the Government will not pay for any information or administrative costs incurred in response to this solicitation; all costs associated with responding to this solicitation will be solely at the interested party's expense. Not responding to this solicitation does not preclude participation in any future IFB, if one is issued. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. The due date and time for submission of bids is contained in the solicitation package. Paper copies will NOT be available. The entire solicitation, including the specification and/or drawings, are available only on the Federal Business Opportunities Web Site at: https://www.fbo.gov/ All contractors MUST be registered in the System for Award Management (SAM) at: https://www.sam.gov/ SITE VIST: -A site visit (pre-bid/pre-proposal conference) will be conducted on 27 March 2019 at 14:00 hrs (02:00PM) AKDT. For attendance, please contact members listed below no later than 26 March 2019 before 16:00 hrs (4:00 PM) AKDT. -Questions should be submitted electronically via email to contacts listed below no later than 29 March 2019 at 14:00 hrs (02:00pm) AKDT. No questions will be taken over the phone. -Bid opening will be 16 April 2019 at 14:00 (2:00pm) AKDT. Points of Contact for this solicitation are: - Primary: SrA Ashton Smith - Email: ashton.smith.4@us.af.mil - Alternate: TSgt James Kot - Email: james.kot@us.af.mil ---ELECTRONIC BIDS WILL NOT BE ACCEPTED---
Award Overview
Award Number
FA500419CA009
Award Amount (SAM.gov award notice)
$1.8M
Award Date
May 1, 2019
Awardee
Awardee UEI
ECX7NUG8LFU6
Original Solicitation
Notice ID: c9e7318574b9316b507575097a8755d7
Posted Date: May 3, 2019
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
FA500419BA007- Pre-Solicitation
- Combined Synopsis
- Awarded
This opportunity has been awarded.
- 5×
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Notice of Intent to Sole Source to Phillips Corporation for updating software and preventative maintenance on a Haas UMC-750SS. GENERAL INFORMATION: Notice Type: Special Notice Contracting Office: 673d Contracting Squadron, JBER, AK Title: Notice of Intent to Sole Source to Phillips Corporation Response Deadline: 2:00PM AKST (6:00PM EST) on 17 Nov 2026 NAICS: 811310 PSC: J036 DESCRIPTION: The 673d Contracting Squadron on Joint Base Elmendorf-Richardson, AK has concluded their market research and intends to solicit, negotiate, and award a sole source firm-fixed price (FFP) contract under RFO 12, Acquisition of Commercial Products and Commercial Services, statutory authority of 10 U.S.C. 3204(a)(1), as implemented by RFO 6.103-1, Only one (1) responsible source and no other supplies or services will satisfy agency requirements to Phillips corporation, CAGE 3MPQ0. The proposed North American Industry Classification System (NAICS) code for this acquisition is 811310, with a small business size standard of $12.5 Million. REQUIREMENT DESCRIPTION: This FFP contract is for a non-personal service to provide technical and human machine interaction programming and preventative maintenance to the Metals Technology Maintenance Squadron shop’s 5th axis vertical milling machine. This service is required to restore the complete functionality of the Haas UMC-750SS that is used in the manufacturing and repairing of non-procurable aircraft and support equipment parts (See Attachment 1 - Haas UMC-750SS Statement of Work_Redacted). REASON FOR SOLE SOURCE: Based on concluded Market Research only Phillips Corporation can fulfill the entire requirement, to include software/firmware updates. SUBMISSION DETAILS: The anticipated award date is 18 November 2026. This notice is not a request for competitive proposals or quotes. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed contract action based upon responses to this notice is solely within the discretion of the Government. Responses must be received no later than 17 November at 2:00 PM (6:00PM EST) AKST. Responses must be submitted via email to the POCs indicated below.. POINTS OF CONTACT (POC): Contract Specialist: Mr. Jarod Lemke, jarod.lemke.1@us.af.mil Contracting Officer: Mr. Joseph Ford, joseph.ford.21@us.af.mil | - | Special Notice | 11/17/2026 |
SOURCES SOUGHT NOTICE Title: Central Heat and Power Plant (CHPP) Boiler Maintenance and Repair Services Department / Agency: Department of the Air Force Sub-tier: Pacific Air Forces (PACAF) Major Command: 354th Fighter Wing Office: 354 CONS / PK, Eielson AFB, AK 99702 1. GENERAL INFORMATION Contract Opportunity Type: Sources Sought Original Published Date: 10/7/2026 Original Response Date: 10/23/2026 at 16:00 AKST Applicable NAICS Code: Primary: 811310 – Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (Small Business Size Standard: $12.5M) Secondary / Alternate: 238220 – Plumbing, Heating, and Air-Conditioning Contractors (Small Business Size Standard: $19.0M) Product Service Code (PSC): J044 – Maintenance, Repair, and Rebuilding of Equipment: Furnace, Steam Plant, and Drying Equipment Place of Performance: Central Heat and Power Plant (CHPP), Bldg 6203 Eielson Air Force Base, AK 99702 United States 2. STATUTORY AUTHORITY & DISCLAIMER This is a SOURCES SOUGHT SYNOPSIS conducted pursuant to RFO Part 10 (Market Research). This notice is issued solely for informational and planning purposes; it does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ). This notice does not commit the U.S. Government (USG) to contract for any supply or service. The Government will not award a contract based on this Sources Sought, nor will it reimburse respondents for any costs incurred in preparing or submitting responses. Participation is strictly voluntary. Failure to respond to this announcement will not preclude an interested party from submitting an offer under any subsequent formal solicitation, should one be issued. Information received will be used within the Department of the Air Force to determine market capabilities, potential small-business set-aside opportunities, and procurement strategy. 3. DESCRIPTION OF REQUIREMENT The 354th Contracting Squadron (354 CONS) at Eielson AFB, Alaska, is conducting market research to identify qualified, capable, and certified commercial contractors interested in providing on-call, critical emergency and scheduled maintenance and repair services for the Central Heat and Power Plant (CHPP) high-pressure power boilers. A copy of the draft Performance Work Statement (PWS) is attached to this SAM.gov posting as Attachment 1. Vendors are strongly advised to review Attachment 1 in its entirety prior to responding. 3.1 Background & Plant Criticality The Eielson AFB CHPP provides vital thermal heat and electrical power to all base facilities under extreme sub-arctic winter conditions (temperatures regularly dropping below -40°F). Unplanned boiler outages pose immediate life-safety, mission, and infrastructure failure risks. Consequently, repair response times and quality standards are non-negotiable. 3.2 Equipment Inventory The requirement encompasses six (6) utility-grade, coal-fired high-pressure power boilers and their associated support systems: Four (4) Springfield Boiler Co. Model #1951 coal-fired high-pressure boilers. Two (2) Indeck Keystone Energy Model #2013 coal-fired high-pressure boilers. 3.3 Core Performance Scope (Refer to PWS Sections 1.0 – 2.5) The contractor shall provide all management, personnel, labor, transportation, tooling, equipment, and certified materials to perform: 24-Hour Emergency Physical On-Site Response: A qualified technician must be physically present on-site at Eielson AFB within 24 hours of initial call-out notification from the Contracting Officer (CO) or Contracting Officer’s Representative (COR). On-Site Inspection & Letter of Recommended Repair (LRR): Submission of a detailed LRR (including root cause, part numbers, compliance citations, labor hours, lead times, and a firm-fixed-price proposal) within one (1) business day of inspection. CO Notice-to-Proceed (NTP) Enforcement: No parts ordering or work beyond initial inspection may occur without formal written authorization from the Contracting Officer. Full Boiler Envelope & Pressure Vessel Repair: Extensive repairs to include any and all associated piping related to boiler production but not limited to: welding, rolling, reshaping, and replacement of water wall tubes, superheater tubes, economizer tubes, generating tubes, pier tubes, front/sidewall/rear headers, superheater headers, mud drums, steam drums, power piping, blowdown drains, safety valves, hand holes, manholes, soot blowers, baffles, and gas passes. No Government-Furnished Property (GFE/GFP): The Government will furnish zero tools, vehicles, facilities, tube rollers, or welding equipment (PWS Section 4.4). Base Security & HAZMAT: Personnel must be vetted via the Defense Biometric Identification System (DBIDS) and satisfy Bioenvironmental Engineering SDS/HAZMAT approval processes prior to bringing materials on-site. 4. MANDATORY QUALIFICATION THRESHOLDS To be deemed capable under this requirement, respondents must demonstrate compliance with the following mandatory qualifications (see PWS Section 3.0): ASME "R" Stamp: The prime contractor must hold an active National Board "R" (Repairs and Alterations) Stamp Certificate of Authorization. ASME Section IX Welder Certifications: All personnel executing welding and repair tasks must hold current certifications compliant with ASME Boiler and Pressure Vessel Code Section IX. State of Alaska Boiler Inspection: All repairs must be inspected and formally accepted by a certified State of Alaska Boiler Inspector. The contractor is solely responsible for scheduling and funding these inspections prior to invoice submittal. Part II: Industry Feedback & PWS Comments Identify any ambiguities, restrictive requirements, or commercial standard misalignments in the attached draft PWS (Attachment 1). Provide feedback on proposed NAICS classification and potential subcontracting/teaming arrangements 5. SUBMISSION INSTRUCTIONS Format: Electronic submission in Adobe PDF format via email. Due Date & Time: All responses must be received no later than 10/30/2026 at 16:00 AKST. Point of Contacts: Contract Specialist: Name: John Jockusch Email: john.jockusch.3@us.af.mil Phone: (907) 377-5371 Contracting Officer: Name: Brandon Gilbert Email: brandon.gilbert.9@us.af.mil Phone: (907) 377-5080 Email Subject Line: FA500427 - Sources Sought Response: Eielson CHPP Boiler Repair - [Company Name] 6. ATTACHMENTS TO THIS SAM.GOV POSTING Attachment 1 – Draft Performance Work Statement (PWS): CHPP Boiler Repair Services, Eielson AFB | - | Market Research | 10/30/2026 |
The Contractor shall provide all personnel, supervision, equipment, tools, test instruments OEM replacement parts, materials, and non-personal services necessary to perform semi-annual inspections, operational testing, preventative maintenance, winterization/de-winterization, and repairs on the Fire Department (FD) Helicopter Trainer (O-100), Structural Trainer (T-500), and Aircraft/Hose Line Trainer (O-100) (collectively referred to as the Automated Fire Training Facility (AFTF) or "Live-Fire Trainers"). The goal is to ensure the facilities remain fully operational and serviceable. The Contractor must perform all work according to the manufacturer’s recommendations, relevant technical orders (TOs), all applicable local, state, and federal guidelines, and National Fire Protection Association (NFPA) standards. | - | Solicitation | 11/27/2026 |
SOLE SOURCE TO LINDE ADVANCED MATERIAL TECHNOLOGIES, CAGE: 33870 Calibration Services for Praxair (HOVF) Thermal Spray Equipment | - | Awarded | Open |
PURPOSE: The purpose of the sources sought is to identify available authorized businesses to provide the requirement for a Crane Load Test at Fairchild AFB. This sources sought notice is for informational and planning purposes only. Pricing information is not being requested at this time. It does not constitute a solicitation and is not to be considered as a commitment by the Government. REQUIREMENT: This notice is issued by the U.S. Air Force, 92d Contracting Squadron, Fairchild AFB, WA. This sources sought is seeking to identify responsible potential sources to test the cranes rated capacity to 125% for the MXS squadron on Fairchild AFB. The Crane Load Test must meet the specifications in accordance with the attached Statement of Work. ANTICIPATED NAICS/SIZE STANDARD: This requirement falls under the NAICS Code of is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, a size standard of $12.5. SUBMISSION OF INFORMATION: All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. All interested parties will be required to respond to the resultant solicitation separately from their response to this sources sought notice. A responsible potential sources shall have registered with the System for Award Management (SAM). The response should be no more than five pages providing the following information: Specifications of the MXS Crane Load Test Business name, address, CAGE code Size and socioeconomic classification based on NAICS size standard If claiming a specific small business category, provide supporting documentation Point of contact including email and phone number Please respond to this request by 19 November 2026 at 10:00 AM Pacific Time | - | Market Research | 11/19/2026 |
Additional Details
Solicitation Number
FA500419BA007
Archive Date
Jun 25, 2019
Office Address
EIELSON AFB, AK, 99702-2200