GovChime
Notice ID: 3b11212708244ad9b855bd195832e18bSpecial Notice

Photometric Filters

Archived. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−06:00
Posted
May 4, 2022
Notice type
Special Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA7000 10 CONS LGC
Place of performance
USAF Academy, CO, 80840
Last updated
Dec 4, 2025

Identifiers

Solicitation number
FA700022Q0050
Notice ID
3b11212708244ad9b855bd195832e18b

Description

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:FA700022Q0050
  1. Special NoticeCurrentMay 4, 2022

    Photometric Filters

    Notice 3b11212708244ad9b855bd195832e18b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
INTENT TO SOLE SOURCE The United States Air Force, AFLCMC/PZIBA, Wright-Patterson AFB, Ohio 45433-5344 publishes this notice of intent to award a sole source contract for informational purposes only. This proposed action is for the acquisition of a Self-Aligning Focus Schlieren System for the Air Force Institute of Technology (AFIT) located at Wright Patterson AFB, Ohio 45433. The Government intends to solicit and negotiate with only one source under the authority of FAR 13-106-1(b)(1), “Contracting officers may solicit from only one source if the contracting officer determines that the circumstances of the contract action deem only one source reasonably available”, resulting in a firm fixed price contract. The Contracting Officer has determined that only one source is reasonably available: RH TECHNOLOGIES LLC. This proposed procurement will be a Sole Source under North American Industry Classification System code (NAICS) 334516 - Analytical Laboratory Instrument Manufacturing. Business size standard is 1,000 employees. The proposed source is RH TECHNOLOGIES LLC 722 Reeves DR Grand Forks, North Dakota 58201-4920, United States This notice of intent is not a request for competitive quotations. However, all responsible sources may submit a capability statement, proposal, quotation, or exception to the intent to purchase on a sole source basis, which shall be considered by the Government if received within five (5) days of this notice. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. In order to comply with FAR 5.207(c)(15), the reason for lack of competition is as follows: The proposed vendor, RH TECHNOLOGIES LLC, is the only known source able to satisfy the government's requirements. The Department of Defense (DoD) has determined the System for Award Management (SAM) to be the single DoD registration for contractors who conduct business or who are interested in conducting business with the DoD. Contractors must be registered in SAM prior to award for contracts issued after 29 May 2012. You may contact SAM at 866-606-8220. SAM website: www.SAM.gov. The contact for this acquisition is Mark Hager and Linh Jameson. Any information should be e-mailed to mark.hager.3@us.af.mil and linh.jameson@us.af.mil no later than 2:00 pm Local (Wright-Patterson AFB) Time, Monday, 02 November 2026. Only inquiries/information received by this date will be considered. Be advised that all correspondence sent via e-mail shall contain a subject line that reads “Self-Aligning Focus Schlieren System”. Note that e-mail filters at Wright-Patterson AFB are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe, or .zip files). Therefore, if this subject line is not included, the e-mail may not get through the e-mail filters. Also, be advised that .zip or .exe files are not allowable attachments and may be deleted by the e-mail filters at Wright-Patterson AFB. If sending attachments with e-mail ensure only .PDF, .doc, or .xls documents are sent. The e-mail filter may delete any other form of attachments. Attachments: Statement of Work (SOW) Redacted Sole Source Justification
-Special Notice11/02/2026
INTENT TO SOLE SOURCE The United States Air Force, AFLCMC/PZIBA, Wright-Patterson AFB, Ohio 45433-5344 publishes this notice of intent to award a sole source contract for informational purposes only. This proposed action is for the acquisition of a wavemeter for the Air Force Institute of Technology (AFIT) located at Wright Patterson AFB, Ohio 45433. The Government intends to solicit and negotiate with only one source under the authority of RFO 6.103-1(b), “One responsible source. Agencies may contract without providing for full and open competition when the supplies or services required by the agency are available from only one responsible source and no other type of supplies or services will satisfy agency requirements,” resulting in a firm fixed price contract. The reason for lack of competition is as follows: The proposed vendor, Toptica Photonics Inc., is the only known source able to satisfy the Government's requirements. No other vendor has developed a wavemeter to the precision of Toptica's WS8-2. The primary factor in choosing this wavemeter is its capability to reliably measure a wavelength to <2 MHz. Other companies produce wavemeters that can be as low as 20 MHz in precision, but only Toptica guarantees accuracy down to 2 MHz. For this reason Toptica is the only company that meets all of the requirements. Both AFIT and contracting personnel utilized subject matter experts with experience for this requirement and vendor outreach but were unable to find other resources that were able to meet this requirement. The Contracting Officer has determined that only one source is reasonably available: Toptica Photonics Inc. This proposed procurement will be a Sole Source under North American Industry Classification System code (NAICS) 334516 – Analytical Laboratory Instrument Manufacturing, with a size standard of 1000 employees. The proposed source is TOPTICA PHOTONICS INC, 1120 Pittsford Victor RD, Pittsford, New York,14534-3818, United States. This notice of intent is not a request for competitive quotations. However, all responsible sources may submit a capability statement, proposal, quotation, or exception to the intent to purchase on a sole source basis, which shall be considered by the Government if received within five (5) days of this notice. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. The Department of Defense (DoD) has determined the System for Award Management (SAM) to be the single DoD registration for contractors who conduct business or who are interested in conducting business with the DoD. Contractors must be registered in SAM prior to award for contracts issued after 29 May 2012. You may contact SAM at 866-606-8220. SAM website: www.SAM.gov. The contact for this acquisition is Dametria Walder. Any information should be e-mailed to dametria.walder@us.af.mil no later than 1:00 pm Local (Wright-Patterson AFB) Time, Friday, 06 November 2026. Only inquiries/information received by this date will be considered. Be advised that all correspondence sent via e-mail shall contain a subject line that reads “FA860127Q0014 AFIT - High Finesse WS8-2 Wavemeter.” Note that e-mail filters at Wright-Patterson AFB are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe, or .zip files). Therefore, if this subject line is not included, the e-mail may not get through the e-mail filters. Also, be advised that .zip or .exe files are not allowable attachments and may be deleted by the e-mail filters at Wright-Patterson AFB. If sending attachments with e-mail ensure only .PDF, .doc, or .xls documents are sent. The e-mail filter may delete any other form of attachments. Attachments: Statement of Work Redacted Sole Source Justification
-Special Notice11/06/2026
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering a Midwave Camera with the capabilities described herein for the Air Force Institute of Technology, located at Wright Patterson Air Force Base, Ohio (WPAFB). The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. All interested firms shall submit a response to the Primary Points of Contact, Ms. Claire Hess at claire.hess@us.af.mil and Ms. Jessica Stamper at jessica.stamper.2@us.af.mil, demonstrating their capability to provide a Midwave Camera. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion. The North American Industry Classification System (NAICS) code assigned to this acquisition is 334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). Respondents are further requested to indicate their status as a foreign-owned/foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made. Respondents should note the potential application of Limitations on Subcontracting (RFO 52.219-14) and the Non-Manufacturer Rule (RFO 52.219-33) to a future acquisition that may result from this Sources Sought. Respondents should consider how the primary tasks identified in this notice will be broken out between prime contractor and subcontractors and address subcontracting in their response, if applicable/necessary. Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program. CAPABILITIES PACKAGE: All interested firms shall submit a capabilities package to provide the Midwave Camera that explicitly demonstrates their capability to provide the required service. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 29 OCTOBER 2026 AT 3:00 PM EASTERN TIME. All correspondence sent via email shall contain a subject line that reads: Midwave Camera. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted. Responses shall be submitted via email to the following addresses: claire.hess@us.af.mil and jessica.stamper.2@us.af.mil Please direct all questions concerning this acquisition to Ms. Claire Hess at claire.hess@us.af.mil and include the necessary subject line indicated above. Attachments: Instructions Technical Requirements
-Market Research10/29/2026
The following questions were received for Request for Quote (RFQ) FA226326Q0017, Dual Axis Digital Autocollimator, and are answered below. For prompt response, please note that any communications regarding this RFQ should reference FA226326Q0017 and be submitted to christine.patterson.1@us.af.mil or michael.hickey.2@us.af.mil. Solicitation Amendment 0001 - 10 July 2026 Question: 05 August 2026 is less than a month away. It seems like a hard deadline in the documents, but it's much sooner than we expected for this. Is there any chance to push it later by a month? Answer: The solicitation has been extended 30 days. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Please ensure to review and submit the required AMENDED documents when preparing your response. Solicitation Amendment 0002 – 27 July 2026 Question: 3.1. User Interface: The DADA shall have an LCD Display with PC user interface controls. Which is preferred: 1) Laptop; or, 2) 19” Rack Mount PC? Answer: 3.1 – PC is only required if it is the LCD display. If so, ideally it is a laptop. But, for this paragraph, we need the display to have an output to communicate with a PC (if it isn’t the display already). Question: 3.2.4 The DADA Shall come with a Right-Angle Target mirror in mount. Can the user please describe how the mirror should be set up? Is there a sketch that shows what is meant, or can it be described again? It's not clear to us exactly what is required. Answer: 3.2.4 – Mirror shall be such that it can have reference feet that are perpendicular to the mirror surface, thus it can be used to measure flatness of a surface with the autocollimator. __________ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Revolutionary FAR Overhaul (RFO) Subpart 12.201-1, as supplemented with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the RFO and Department of Defense Federal Acquisition Regulation Supplement (DFARS) Revolutionary FAR Overhaul Class Deviations (R-DFARS). RFO regulations are available electronically at the Air Force FAR site, https://www.acquisition.gov/far-overhaul and R-DFARS guidance can be located at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. This announcement constitutes the only solicitation for which a Request for Quotation (RFQ) will be issued. It is the offeror's responsibility to monitor this site for the release of amendments (if any). The RFQ number is FA226326Q0017 and shall be referenced on any offer submitted. The North American Industry Classification System (NAICS) code for this acquisition is 334516 and the business size standard is 1000 employees. This RFQ is being solicited as a Full and Open Competition. AFMETCAL at Heath OH intends to award a firm-fixed price Indefinite Delivery Indefinite Quantity (IDIQ) contract under Simplified Acquisition Procedures (SAP) in accordance with RFO Part 12.201-1 – Simplified Procedures and RFO Part 12-Acquisition of Commercial Products and Commercial Services, for the purchase of Dual Axis Digital Autocollimators. The anticipated Best Estimated Quantity (BEQ) for this acquisition is 39 units over five (5) years with one (1) additional Option Year. There is no guarantee that all units included in the BEQ will be ordered. Products offered shall be commercial items or commercially available off-the shelf (COTS) items meeting the definitions in RFO Part 2. Items proposed shall be new units. Reconditioned, remanufactured, or used items are not acceptable and shall not be proposed. The units must meet the requirements of Purchase Description (PD) 26M-258A-OP Rev. 2, dated 16 June 2026. The RFQ, PD, DD 1423 Data Requirements, Anticipated Delivery Locations and other applicable solicitation attachments are available for download at this site. Please review ALL documents carefully. IMPORTANT NOTICE TO OFFERORS: All prospective awardees are required to register at SAM and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area WorkFlow (WAWF) through Procurement Integrated Enterprise Environment (PIEE) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at https://wawf.eb.mil. Prior to submitting invoices in the production system, contractors must register for an account at https://wawf.eb.mil/. Offers MUST: (1) be valid for ninety (90) days from the RFQ closing date, (2) submit commercial or COTS unit for evaluation with written proposal, (3) be for the items described in the PD (List of Attachments, Attachment 1), (4) be for new units (not reconditioned, remanufactured, or used unit), (5) be FOB Destination to AFMETCAL, Heath, OH, (6) include a delivery schedule, if unable to meet delivery schedule in Deliveries and Performance section, (7) include copy of commercial price list, (8) include name of and be signed by an authorized company representative along with telephone number, facsimile number, and email address, (9) include taxpayer identification number (TIN), CAGE Code Number and DUNS Number, (10) include a technical proposal that includes a written line-by-line response to the PD, (11) include a copy of the warranty addressed in the PD (List of Attachments, Attachment 1, Item 4.8), (12) include completed Supplies or Services and Price/Cost section, (13) include a completed Total Evaluated Price Worksheet (Attachment 6 AMENDED), (14) completed Offeror Representations and Certifications – Commercial Items. Offerors shall ensure information in SAM is current. The Government reserves the right to incorporate the successful offeror’s technical proposal into any contract resulting from this solicitation. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Offerors shall submit electronic files to DoD SAFE, https://safe.apps.mil following the instructions provided in Instructions to Offerors (Attachment 4 AMENDED) of the RFQ, under Electronic Proposal Submission. Offers submitted in forms other than through DoD Safe are not permissible and will not be considered. Please note that the uploaded files must be timestamped by the offer due date and time. Offerors bear the risk for receipt of submitted offers being untimely. Offerors shall allow sufficient time for receipt of electronic submissions by the due date and time. All responsible sources may submit an offer, which if received timely shall be considered by this agency.
-Combined Synopsis09/04/2026

Additional Details

Solicitation Number

FA700022Q0050

Archive Date

Not specified

Office Address

USAF ACADEMY, CO, 80840-2303