GovChime
Notice ID: 5b2f38717bcd4f739a90b00fe126580eAward NoticeAwardedArchived

Remanufacture of F-15 Butterfly Valve

Awarded on February 5, 2026. Full description on SAM.gov.

Awarded tounder FA811826D0022 (source: SAM.gov award notice)• $427.0K

Overview

Posted
February 5, 2026
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8118 AFSC PZABB
Place of performance
Oklahoma, 73145
Last updated
Nov 3, 2026
First published
Last updated on SAM.gov
Award date
Feb 5, 2026
Award amount (SAM.gov award notice)
$427.0K

Identifiers

Solicitation number
FA8118-26-R-0004
Notice ID
5b2f38717bcd4f739a90b00fe126580e
Award number (PIID)
FA811826D0022

Description

**UPDATED PROPOSAL DUE DATE TO 7 JANUARY 2026 @ 3:00PM CST **

A 5-YEAR (THREE-YEAR BASIC AND A TWO-YEAR OPTION PERIOD) FIRM FIXED PRICE REQUIREMENTS TYPE CONTRACT IS CONTEMPLATED.

NOTE: It is anticipated that pricing of this action will be based on adequate price competition; therefore, offerors are not required to submit certified cost or pricing data at the time of proposal. However, after receipt of proposals, it is determined that adequate price competition does not exist, a request for other than certified cost or pricing data may be required in accordance with FAR 15.403-1(b)(1).  
52.232-18 Availability of Funds.  As prescribed in 32.706-1(a), insert the following clause: Availability of Funds (Apr 1984)
Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.  (End of clause)
(a)  A Pre-Award Survey and/or Initial Production Evaluation (IPE) is required.  Details are provided in Appendix A, paragraphs 1.2 and 1.3 respectively.

(b)  The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the end item to a like-new condition.  The contractor shall also accomplish ALL necessary packing and preservation and packaging. ALL work shall be completed in accordance with the requirements specified herein (including attachments hereto) and all costs associated with work specifications, technical orders, and/or cost associated with Over and Above request (excluding missing parts) shall be included in the unit price.  The government shall only pay the contractor for missing components after review and approval of O&A request. No additional cost will be allowed (i.e. material handling, profit, direct or indirect costs).
(c)  Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Tinker AFB Small Business Office. For questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the TAFB Small Business Office at: AFSC/SB, 3001 Staff Drive, Suite 1AG 85A, Tinker AFB, OK 73145-3009.  Email: afsc.sb.workflow@us.af.mil  Website: https://www.afsc.af.mil/units/sbo/index.asp. The actual SAR package submission itself shall be submitted electronically through DoD SAFE at https://safe.apps.mil/.  DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the email address below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the email address below and ask that they “Request a Drop-Off” to your email via DoD SAFE, which will enable you to be able to upload the SAR Submission Package documents to DoD SAFE.429SCMS.SASPO.Workflow@us.af.mil

For more information on the Strategic Alternate Sourcing Program, please visit: https://www.tinker.af.mil/Home/429SCMS-SASPO/

As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

(d)  In order to receive any technical data related to this acquisition, offerors must send an email request to Cliff Morgan at clifford.morgan.8@us.af.mil or Amy Gil at amy.gil@us.af.mil. Release of any data is subject to applicable data rights.  The request shall include the applicable solicitation number, the specific data needed (including TO(s)), and a copy of the current, approved DD Form 2345.  The form, including instructions for completing the form, is available at:  http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html.  The Government is not responsible for incomplete, misdirected, or untimely requests.**

In order to receive drawings contractors will need to request all needed drawings through the JEDMICS website: https://af-jedmics.navair.navy.mil/webjedmics/index.jsp.  Contractors who need an account will need to complete the instructions at the above link.

(e)  GOVERNMENT PROPERTY FURNISHED FOR REPAIR (FAR 16.503(c))
Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as “estimated” or “maximum” will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

(f) END ITEMS BEYOND REMANUFACTURE
"Reparable End Items" are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements. Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the overhaul limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).

(g) If the contractor estimates that any item is not reparable (i.e. beyond overhaul), the Contractor shall promptly notify the administrative contracting officer in writing and shall not perform further on any such items except after receipt of approval from the direction of the procurement contracting officer (PCO). Upon written confirmation from the PCO that a particular item is not reparable, the contractor shall dispose of the unit in the manner directed by the PCO.

Contractors are cautioned that until a contract is executed, any effort performed in support of the anticipated effort is performed strictly at their own risk and expense. There is no authorization to begin performance until the contractor has received a duly authorized contract signed by the Contracting Officer. Also, this request for proposal is not to be construed to mean that the award of a contract is assured, as the availability of funds, timely submission of all requested documents, and acceptance by both parties are prerequisite to any contract award.

(h) Condemned units shall not be counted as production.

(i) In the event there are component part(s) with long lead times, the awardee is responsible for securing necessary parts to meet the Government’s required delivery schedule.

(j) In the event that DFARS clause 252.217-7001, Surge Option, is invoked, quantities and prices will be negotiated at that time.  The fill-in data in Clause 252.217-7001 will be TBD until a surge is known and negotiations are necessary.

(k) Item Unique Identification (IUID) marking is required in accordance with DFARS 252.211-7003. Contractor determined location and method of marking is acceptable.

(l)  Dates listed in clauses 52.216-19 and 52.216‐21 are based on the estimated award date. These dates will be revised prior to award based on the actual award date.

(m)  Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond economical repair of limits specified in the Work Specification and/or Technical Orders.  All cost for work performed by the contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).  

(n) In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the contractor must include a DD1348-1when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the DD250.

(o) In accordance with DAFFARS 5309.105-1 the Supplier Performance Risk System (SPRS) is checked for supplier risk assessments when determining responsibility.  DFARS 252.204.7303(b) states that the contracting officer shall verify that the summary level score of a current NIST SP 800-171 DoD Assessment (i.e., not more than 3 years old, unless a lesser time is specified in the solicitation) for each covered contractor information system that is relevant to an offer, contract, task order, or delivery order are posted in Supplier Performance Risk System (SPRS). Offerors are required to represent they will implement National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 SP 800-171 (reference the provision DFARS 252.204-7008). A score of 110 must be in SPRS, if assessment score is less than 110, contractors must submit a plan with their proposal to become compliant.
 

Full description on SAM.gov

Award Overview

Award Number

FA811826D0022

Award Amount (SAM.gov award notice)

$427.0K

Award Date

Feb 5, 2026

Awardee

Awardee UEI

U8ZKGNNR4YR8

Awardee CAGE Code

58078

Awardee Address

Tucson, AZ 85710, UNITED STATES

Original Solicitation

Notice ID: 5b2f38717bcd4f739a90b00fe126580e

Posted Date: Feb 5, 2026

Original Response Deadline: Not specified

Task Orders Under This IDV

Top 10 by total obligated

1
  • FA811826F0157
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    $4.8KSigned Jun 17, 2026

More From This Vendor

Top 5 most recent

5
  • W58RGZ25F0217
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    $104.0KSigned Aug 11, 2026
  • FA811826D0038
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    —Signed Aug 11, 2026
  • FA811822D0027
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    —Signed Aug 7, 2026
  • SPE4A724PF394
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    $12.1KSigned Aug 4, 2026
  • FA811822D0027
    AIRTRONICS, LLC
    Department of DefenseNAICS 336413
    —Signed Jul 30, 2026

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (17)

  • FA811826R0004_______0001.pdf

    101 KBAdded in Solicitation version 4Posted
    Download
  • SOW.pdf

    279 KBAdded in Solicitation version 1Posted
    Download
  • ITEM_DESCRIPTION_REDACTED.pdf

    37 KBAdded in Solicitation version 1Posted
    Download
  • IUID_CHECKLIST_REDACTED.pdf

    39 KBAdded in Solicitation version 1Posted
    Download
  • JQRR.pdf

    117 KBAdded in Solicitation version 1Posted
    Download
  • CAV AF Reporting Requirements.pdf

    177 KBAdded in Solicitation version 1Posted
    Download
  • CDRLs.pdf

    2.1 MBAdded in Solicitation version 1Posted
    Download
  • Transportation Data.pdf

    468 KBAdded in Solicitation version 1Posted
    Download
  • Quality Assurance Report.pdf

    490 KBAdded in Solicitation version 1Posted
    Download
  • Packaging Requirements.pdf

    549 KBAdded in Solicitation version 1Posted
    Download
  • DID_80503.pdf

    321 KBAdded in Solicitation version 1Posted
    Download
  • DID_81995A.pdf

    245 KBAdded in Solicitation version 1Posted
    Download
  • DID_80969.pdf

    173 KBAdded in Solicitation version 1Posted
    Download
  • DID_81838.pdf

    91 KBAdded in Solicitation version 1Posted
    Download
  • DID_80441D.pdf

    93 KBAdded in Solicitation version 1Posted
    Download
  • GFP.pdf

    99 KBAdded in Solicitation version 1Posted
    Download
  • FA8118-26-R-0004.pdf

    21 MBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 2
    Version 2SolicitationArchived

    Remanufacture of F-15 Butterfly Valve

    Notice 08dbf6d8b2c049a485e7c3c2611e1833 on SAM.gov

  2. 5
    Version 5Award NoticeArchivedCurrent

    Type changed from Solicitation to Award Notice

    Remanufacture of F-15 Butterfly Valve

    Notice 5b2f38717bcd4f739a90b00fe126580e on SAM.gov

Other notices for this solicitation

  1. SolicitationRelated noticeOct 16, 2025

    Remanufacture of F-15 Butterfly Valve

    Notice 625fce89031f4159bc368cf99aa5d06e on SAM.gov

  2. SolicitationRelated noticeDec 11, 2025

    Remanufacture of F-15 Butterfly Valve

    Notice 23d7719e9c8e4ded91a3fb8ca7234781 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The purpose of this Amendment -0005 is to extend the proposal due date until 04 November 2026 at 3:00p.m. CST
-Solicitation11/04/2026
The Purpose of amendment -03 is to extend the proposal due date until 04 September 2026 at 3:00 p.m.
-Solicitation09/04/2026
The C-5 Ram Air Fan is used to cool the air system turbine fan that accelerates the engine bleed air across the primary and secondary heat exchangers.
-Solicitation12/08/2026
Update response due date on Solicitation Form SF1447 to 13 NOV 2026; Update SubCLIN qtys, Update Ordering Periods on SubCLINsA 5-YEAR FIRM-FIXED PRICE INDEFINITE DELIVERY INDEFINITE QUANTITY (IDIQ) TYPE CONTRACT IS CONTEMPLATED. All quantities specified herein represent the total contract quantities for all five years combined. The ordering period for each line item shall extend from the contractual effective date to five years thereafter or until the maximum quantity for each line item is reached, whichever comes first. The minimum and maximum quantities for each line item are as follows: Line-Item 0001 NSN 4810007616225RK Quantity-MIN: 11, MAX: 70
-Solicitation11/13/2026
-Solicitation08/11/2026

Additional Details

Solicitation Number

FA8118-26-R-0004

Archive Date

Feb 20, 2026

Office Address

TINKER AFB, OK, 73145-3303