GovChime
Notice ID: 79ecf2f4e6e344ed9cf940b486c587dfSolicitationArchived

Remanufacture of the F-15 Pitch/Roll Channel Assemblies & Pitch Trim Controller

Archived on February 16, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM CST
Posted
December 3, 2025
Notice type
Solicitation
Set-aside
8(a) Sole Source
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8118 AFSC PZABB
Place of performance
S Coffeyville, Oklahoma
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA811826R0001
Notice ID
79ecf2f4e6e344ed9cf940b486c587df

Description

Please see solicitiation and attachments below.

Contact POC for additional information.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (33)

  • Packaging Requirements.pdf

    77 KBAdded in Presolicitation version 3Posted
    Download
  • GFP-Attachment.pdf

    7.1 KBAdded in Presolicitation version 3Posted
    Download
  • Transportation Data.pdf

    89 KBAdded in Presolicitation version 3Posted
    Download
  • Updated SOW.pdf

    721 KBAdded in Presolicitation version 3Posted
    Download
  • Appendix_A_Statement_of_Work.pdf

    1.2 MBAdded in Solicitation version 6Posted
    Download
  • CAVAF.pdf

    302 KBAdded in Presolicitation version 3Posted
    Download
  • Item_Description_NSN_3097HS.pdf

    57 KBAdded in Solicitation version 6Posted
    Download
  • CDRL.pdf

    110 KBAdded in Presolicitation version 3Posted
    Download
  • Special_Packaging_Instructions.pdf

    242 KBAdded in Solicitation version 6Posted
    Download
  • CAV_AF_Requirements.pdf

    302 KBAdded in Solicitation version 6Posted
    Download
  • DI-PSSS-81995A.pdf

    193 KBAdded in Presolicitation version 3Posted
    Download
  • IUID_Checklist_NSN_3097HS.pdf

    60 KBAdded in Solicitation version 6Posted
    Download
  • Transportation_Data.pdf

    89 KBAdded in Solicitation version 6Posted
    Download
  • Packaging_Requirements.pdf

    77 KBAdded in Solicitation version 6Posted
    Download
  • DI_MGMT_80441D_GFP.pdf

    149 KBAdded in Solicitation version 6Posted
    Download
  • DI_PSSS_81995A_CDM.pdf

    193 KBAdded in Solicitation version 6Posted
    Download
  • Repair_Data_List_NSN_0599.pdf

    52 KBAdded in Solicitation version 6Posted
    Download
  • Justification_for_Qualification_Requirements.pdf

    235 KBAdded in Solicitation version 6Posted
    Download
  • Item_Description_NSN_2029.pdf

    57 KBAdded in Solicitation version 6Posted
    Download
  • DI_MGMT_80969_Surge.pdf

    157 KBAdded in Solicitation version 6Posted
    Download
  • IUID_Checklist_NSN_0599.pdf

    59 KBAdded in Solicitation version 6Posted
    Download
  • Repair_Data_List_NSN_3097HS.pdf

    53 KBAdded in Solicitation version 6Posted
    Download
  • Repair_Data_List_NSN_2029.pdf

    52 KBAdded in Solicitation version 6Posted
    Download
  • DI-MGMT-81838.pdf

    30 KBAdded in Presolicitation version 3Posted
    Download
  • DI-MGMT-80969.pdf

    157 KBAdded in Presolicitation version 3Posted
    Download
  • Item_Description_NSN_0599.pdf

    59 KBAdded in Solicitation version 6Posted
    Download
  • IUID_Checklist_NSN_2029.pdf

    60 KBAdded in Solicitation version 6Posted
    Download
  • Government_Furnished_Property.pdf

    3.6 KBAdded in Solicitation version 6Posted
    Download
  • DI_MGMT_81838_CAV_AF.pdf

    30 KBAdded in Solicitation version 6Posted
    Download
  • Contract_Data_Requirements_List_CDRL.pdf

    110 KBAdded in Solicitation version 6Posted
    Download
  • DI-MGMT-80441D.pdf

    149 KBAdded in Presolicitation version 3Posted
    Download
  • FA8118-26-R-0001.pdf

    2.8 MBAdded in Solicitation version 6Posted
    Download
  • Synopsis.docx

    33 KBAdded in Presolicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3PresolicitationArchived

    Remanufacture of the F-15 Pitch/Roll Channel Assemblies & Pitch Trim Controller

    Notice d13a293406b346b6bbf0b11379b98fbd on SAM.gov

  2. 6
    Version 6SolicitationArchivedCurrent

    Type changed from Presolicitation to Solicitation

    Remanufacture of the F-15 Pitch/Roll Channel Assemblies & Pitch Trim Controller

    Notice 79ecf2f4e6e344ed9cf940b486c587df on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
A 3-YEAR BASIC, FIRM FIXED PRICE REQUIREMENTS TYPE CONTRACT IS CONTEMPLATED. THE GOVERNMENT ANTICIPATES A SOLE SOURCE AWARD TO Eaton (CAGE: 86090). 52.232-18 Availability of Funds. As prescribed in 32.706-1(a), insert the following clause: Availability of Funds (Apr 1984) Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. (End of clause) (a) A Pre-Award Survey and/or Initial Production Evaluation (IPE) is required. Details are provided in Appendix A, paragraphs 1.2 and 1.3 respectively. (b) The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the end item to a like-new condition. The contractor shall also accomplish ALL necessary packing and preservation and packaging. ALL work shall be completed in accordance with the requirements specified herein (including attachments hereto) and all costs associated with work specifications, technical orders, and/or cost associated with Over and Above request (excluding missing parts) shall be included in the unit price. The government shall only pay the contractor for missing components after review and approval of O&A request. No additional cost will be allowed (i.e. material handling, profit, direct or indirect costs). (c) Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Tinker AFB Small Business Office. For questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the TAFB Small Business Office at: AFSC/SB, 3001 Staff Drive, Suite 1AG 85A, Tinker AFB, OK 73145-3009. Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp. The actual SAR package submission itself shall be submitted electronically through DoD SAFE at https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the email address below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the email address below and ask that they “Request a Drop-Off” to your email via DoD SAFE, which will enable you to be able to upload the SAR Submission Package documents to DoD SAFE. 429SCMS.SASPO.Workflow@us.af.mil. For more information on the Strategic Alternate Sourcing Program, please visit: https://www.tinker.af.mil/Home/429SCMS-SASPO/ As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. In order to receive any technical data related to this acquisition, offerors must request access to the TO on https://etims.cce.af.mil/ETIMS/index. In order to receive drawings (previously done through JEDMICS), contractors will need to request access to the ATeam via a DD Form 2875. Requests will be made to ralc.tila.centra@us.af.mil. The PCO listed above will be the government sponsor for the DD Form 2875. (d) GOVERNMENT PROPERTY FURNISHED FOR REPAIR (FAR 16.503(c)) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as “estimated” or “maximum” will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract. (e) END ITEMS BEYOND REMANUFACTURE "Reparable End Items" are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements. Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the overhaul limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s). (f) If the contractor estimates that any item is not reparable (i.e. beyond overhaul), the Contractor shall promptly notify the administrative contracting officer in writing and shall not perform further overhaul on any such items except at the direction of the administrative contracting officer (ACO). Upon written confirmation from the ACO that a particular item is not reparable, the contractor shall dispose of the unit in the manner directed by the ACO. Contractors are cautioned that until a contract is executed, any effort performed in support of the anticipated effort is performed strictly at their own risk and expense. There is no authorization to begin performance until the contractor has received a duly authorized contract signed by the Contracting Officer. Also, this request for proposal is not to be construed to mean that the award of a contract is assured, as the availability of funds, timely submission of all requested documents, and acceptance by both parties are prerequisite to any contract award. (g) Condemned units shall not be counted as production. (h) In the event there are component part(s) with long lead times, the awardee is responsible for securing necessary parts to meet the Government’s required delivery schedule. (i) In the event that DFARS clause 252.217-7001, Surge Option, is invoked, quantities and prices will be negotiated at that time. The fill-in data in Clause 252.217-7001 will be TBD until a surge is known and negotiations are necessary. (j) Item Unique Identification (IUID) marking is required in accordance with DFARS 252.211-7003. Contractor determined location and method of marking is acceptable. (k) Dates listed in clauses 52.216-19 and 52.216‐21 are based on the estimated award date. These dates will be revised prior to award based on the actual award date. (l) In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the contractor must include a DD1348-1when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the DD250. (m) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFSC/PZC at 405-736-3273. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. The ombudsman has no authority to render a decision that binds the agency. Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.
78%
Solicitation11/19/2026
See attachment.
69%
Solicitation03/23/2026
Update response due date on Solicitation Form SF1447 to 13 NOV 2026; Update SubCLIN qtys, Update Ordering Periods on SubCLINsA 5-YEAR FIRM-FIXED PRICE INDEFINITE DELIVERY INDEFINITE QUANTITY (IDIQ) TYPE CONTRACT IS CONTEMPLATED. All quantities specified herein represent the total contract quantities for all five years combined. The ordering period for each line item shall extend from the contractual effective date to five years thereafter or until the maximum quantity for each line item is reached, whichever comes first. The minimum and maximum quantities for each line item are as follows: Line-Item 0001 NSN 4810007616225RK Quantity-MIN: 11, MAX: 70
68%
Solicitation11/13/2026
Synopsis not required
66%
Combined Synopsis08/31/2026
PLEASE SEE ATTACHED DOCUMENT FOR MORE INFORMATION. Spares Procurement of: VALVE ASSEMBLY,MANI Platform: F101 NSN: 4810-01-143-8543JF P/N: 721599D Notice ID (PR#): FD20302700250 AMC/AMSC: 3P Department/Ind. Agency: DEPT OF DEFENSE Sub-tier: DEPT OF THE AIR FORCE Major Command: AFMC Sub Command: AIR FORCE SUSTAINMENT CENTER Office: Requirements Office GENERAL INFORMATION • Contract Opportunity Type: Sources Sought (Original) • All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA Classification • Federal Stock Class (manufacture): 4810 • NAICS Code: 336413 The proposed North American Industry Classification Systems (NAICS) Code has a corresponding Size Standard of 1,250 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hubzone Businesses, and Women-Owned Small Businesses. • Place of Performance: Tinker AFB, OK 73145 USA CONTACT INFORMATION Organization: 421st SCMS Workflow Email: 421scms.requirements.workflow@us.af.mil SEND RESPONSES HERE PURPOSE/DESCRIPTION INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT. THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential Spares Procurement sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited. The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc. The 421st SCMS Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the Spares Procurement of the NSN(s) listed below. REQUIREMENTS Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below: Part Number: 721599D NSN: 4810-01-143-8543JF Estimated Spares Requirement: 82 ea
65%
Market Research10/06/2026

Additional Details

Solicitation Number

FA811826R0001

Archive Date

Feb 16, 2026

Office Address

TINKER AFB, OK, 73145-3303