Notice ID: b1ccf60b177d4cd28f9c2937b19df674Solicitation
Solicitation - F100-PW-229 7-12th Stage Shroud Segments
Archived on September 30, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−05:00
- Posted
- July 24, 2020
- Notice type
- Solicitation
- NAICS
- 336412: Aircraft Engine and Engine Parts Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- FA8121 AFSC PZAAA
- Place of performance
- Tinker AFB, OK, 73145
- Last updated
- Apr 29, 2026
Identifiers
- Solicitation number
- FA812120R0028
- Notice ID
- b1ccf60b177d4cd28f9c2937b19df674
Description
This requirement is for the repair of the F100-PW-229 7th - 12th Stage Compressor Stator Shrouds. This 5 year FFP/IDIQ will have one base year and four one-year options for the F100-PW-229 7th - 12th Stage Compressor Stator Shrouds. Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards. NOTE 1: The contractor shall furnish all required labor, direct material, parts, facilities, test equipment, and services to accomplish repair, test, packaging, preservation and return to the government a completely serviceable item listed in "SECTION B". All repair will be performed as called for in the Performance Work Statement (PWS). NOTE 2: The Government is only obligated to buy at least the minimum quantity in accordance with FAR 52.216-22(b). NOTE 3: Delivery acceleration/Best Delivery is desirable and acceptable. NOTE 4: Fast Transportation is ONLY authorized IF the Contracting Officer, by written authorization through the ACO, authorizes Fast Transportation. NOTE 5: Condemnations WILL be replaced. Condemnations will NOT count toward deliveries. Cost of condemnations SHALL be included in the unit price. NOTE 6: The statement IUID Required: YES is on all line items BUT it is ONLY required if the unit price is over $5,000.00 is accordance with clause 252.211-7003 Item Usage Identification and Valuation. Any resultant contract with line item unit price over $5,000 will have IUID Required: YES, on that line item. This note is not applicable to "DATA" line items. NOTE 7: Email proposals are acceptable. NOTE 8: This is a Critical Safety Item.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
FA812120R0028- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- SolicitationCurrentJul 24, 2020
Solicitation - F100-PW-229 7-12th Stage Shroud Segments
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The US Air Force Life Cycle Management Center (AFLCMC) F100 Program intends to issue a sole source “C”-type contract (named F100 Engine Exchange) to Pratt & Whitney (P&W), a Division of RTX Corporation for a “no-cost” exchange of property whereby the Government will deliver 51 F100-PW-220 engines to the Contractor, in exchange for the Contractor delivering 13 F100-229 new engine augmentor modules to the Government. A Sources Sought Synopsis (SSS) FA8124-RFI-AUG-2026 was posted from 4 August 2026 through 3 September 2026. Results from the SSS did not indicate any source other than P&W could perform the work under this contract at the prime level without the government incurring unacceptable delays and substantial duplication of costs not recoverable through competition. The government is awarding this contract under the authority of RFO 6.103-1,"Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." A Justification and Approval (J&A) for using Other Than Full and Open Competition was approved on 23 October 2026. All responsible sources may submit a capability statement to the Contracting Officer by the date listed in this notice to be considered by the agency. Respondents shall specify status as a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, economically disadvantaged women-owned small business, HUBZone small business, veteran-owned small business, or service-disabled veteran-owned small business. This synopsis does not constitute an Invitation for Bids (IFB) or a Request for Proposals (RFP), nor does it restrict the Government to an ultimate acquisition approach. The government will not reimburse any costs associated with preparing or submitting a response to this notice. Due to security access requirements, foreign participation is not permitted at the prime contractor level. Contracting Activity: AFLCMC/LPK, 3001 Staff Dr, Tinker AFB, OK 73145. | - | Pre-Solicitation | 11/17/2026 |
Solicitation Amendment 03: The purpose of the amendment is to update CLIN 0011 (POST AWARD CONFERENCE) from NSP to FFP, establish it as the minimum order for the contract, and attach pricing matrix. Solicitation Amendment 02: The purpose of the amendment is to attach an updated Statement of Work (SOW) and update the CLIN structure for solicitation FA8122-26-R-0007. Solicitation Amendment 01: The purpose of the amendment is to correct National Stock Number (NSN) associated with LPT Stage I Blade subCLINs 0001AB – 4001AB (USAF) and 0002AB – 4002AB (Navy) and add Inspection/Acceptance and Quality Assurance information to subCLINs 0001AB – 4001AB (USAF). Solicitation Noun: F108 Module 13/15 & 14 LPT Assembly (USAF/USN) Remanufacture NSN: 2840-01-229-5786PN (13/15 USAF); 2840-01-484-3913PN (13/15 USN); 2840-01-189-2941PN (14 USAF); 2840-01-483-8785PN (14 USN) P/N: 305-482-301-0 (13/15 USAF); 305-482-301-0 (13/15 USN); 301-316-158- 0 (14 USAF); 301-316-158-0 (14 USN) This is a competitive acquisition to qualified sources. Please see attached. Mod 14 (USAF/USN): No. 4 Bearing is included in remanufacture. Two additional subCLINs have been added for Shaft and Stub Shaft replacement. Mod 13/15 (USAF/USN): SubCLIN has been added for Stage I Blades. 105 blades will be paid for each USAF module and 141 blades for each USN module. | - | Solicitation | 09/15/2026 |
NSN: 2840-01-625-7346NZ NOUN: SEAL, METALLIC, AIRCR TOP DRAWING: 4088961 EDL REVISION & DATE: 2 / 10 APR 2026 MDC CODE: WCF IM NAME: LOVELACE, BRENT S | - | Special Notice | 08/19/2027 |
NSN: 2840-01-445-4017NZ NOUN: SEAL, AIR, AIRCRAFT G TOP DRAWING: 4083716-01 EDL REVISION & DATE: 8 / 19 MAR 2025 MDC CODE: W9J IM NAME: DOBBINS, MICHELLE E | - | Special Notice | 06/10/2027 |
NSN: 2840-01-357-1941PR NOUN: AUGMENTOR NOZZLE SE TOP DRAWING: 9538M95G05 EDL REVISION & DATE: 16 / 27 APR 2026 MDC CODE: AAJ IM NAME: ROACH, REBECCA L | - | Special Notice | 05/06/2027 |
Additional Details
Solicitation Number
FA812120R0028
Archive Date
Sep 30, 2020
Office Address
TINKER AFB, OK, 73145-3303