Remanufacture of TF-33 Low and High-Speed Compressor Stators - MAC IDIQ
Archived on May 16, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 6:00 PM CDT
- Posted
- April 2, 2026
- Notice type
- Solicitation
- Set-aside
- No Set aside used
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8121 AFSC PZAAA
- Place of performance
- S Coffeyville, Oklahoma, 73145
- Last updated
- Nov 1, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA812126R0004
- Notice ID
- 0a8a7c397d694636a7167ae73c18c7dd
Description
The Air Force Sustainment Center (AFSC) is contemplating to procure the remanufacture of the TF33 Stators and Shrouds cited above for a 5-year Firm-Fixed Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Contract (MAC) with 2 Year Basic with 3 One Year Options.
Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW RFO 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained, and the source will be reviewed as a possible source for future awards.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (23)
- Download
FA812126R0004.pdf
258 KBAdded in Solicitation version 6Posted - Download
FA812126R0004_Clauses.pdf
88 KBAdded in Solicitation version 6Posted - Download
Ordering_Procedures.pdf
384 KBAdded in Solicitation version 6Posted - Download
4223003_PKGRQMT_REPORT.pdf
80 KBAdded in Solicitation version 6Posted - Download
4222577_TRNSPDATA_REPORT.pdf
97 KBAdded in Solicitation version 6Posted - Download
SOW_Rev_0.pdf
423 KBAdded in Solicitation version 6Posted - Download
RQR_CSI.pdf
1.3 MBAdded in Solicitation version 6Posted - Download
DiD_Report_Shipping_Packaging_Descrepancy.pdf
282 KBAdded in Solicitation version 6Posted - Download
DiD_SCRM_Plan.pdf
175 KBAdded in Solicitation version 6Posted - Download
DiD_ASDP_DR.pdf
174 KBAdded in Solicitation version 6Posted - Download
DiD_Production_Surge_Plan.pdf
157 KBAdded in Solicitation version 6Posted - Download
DiD_GP_Inventory_Report.pdf
146 KBAdded in Solicitation version 6Posted - Download
SPI_1345.pdf
210 KBAdded in Solicitation version 6Posted - Download
DiD_CDM_Production_Report.pdf
126 KBAdded in Solicitation version 6Posted - Download
GFP_Attachment.pdf
9.1 KBAdded in Solicitation version 6Posted - Download
DID_GFM_by_NSN.pdf
60 KBAdded in Solicitation version 6Posted - Download
CDRLs_A001_A008.pdf
134 KBAdded in Solicitation version 6Posted - Download
SPI_1797.pdf
83 KBAdded in Solicitation version 6Posted - Download
DiD_CAV_Reporting.pdf
23 KBAdded in Solicitation version 6Posted - Download
SPI_1625.pdf
66 KBAdded in Solicitation version 6Posted - Download
SPI_1800.pdf
59 KBAdded in Solicitation version 6Posted - Download
SPI_8028.pdf
56 KBAdded in Solicitation version 6Posted - Download
Presolicitation - FD2030250415 01.pdf
178 KBAdded in Presolicitation version 3Posted
Lifecycle
- 3Version 3PresolicitationArchived
Remanufacture of TF-33 Vanes and Shrouds
- 6Version 6SolicitationArchivedCurrent
Type changed from Presolicitation to Solicitation
Remanufacture of TF-33 Low and High-Speed Compressor Stators - MAC IDIQ
- 9Version 9Award NoticeArchived
Type changed from Solicitation to Award Notice
Remanufacture of TF-33 Low and High-Speed Compressor Stators - MAC IDIQ
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Solicitation Amendment 03: The purpose of the amendment is to update CLIN 0011 (POST AWARD CONFERENCE) from NSP to FFP, establish it as the minimum order for the contract, and attach pricing matrix. Solicitation Amendment 02: The purpose of the amendment is to attach an updated Statement of Work (SOW) and update the CLIN structure for solicitation FA8122-26-R-0007. Solicitation Amendment 01: The purpose of the amendment is to correct National Stock Number (NSN) associated with LPT Stage I Blade subCLINs 0001AB – 4001AB (USAF) and 0002AB – 4002AB (Navy) and add Inspection/Acceptance and Quality Assurance information to subCLINs 0001AB – 4001AB (USAF). Solicitation Noun: F108 Module 13/15 & 14 LPT Assembly (USAF/USN) Remanufacture NSN: 2840-01-229-5786PN (13/15 USAF); 2840-01-484-3913PN (13/15 USN); 2840-01-189-2941PN (14 USAF); 2840-01-483-8785PN (14 USN) P/N: 305-482-301-0 (13/15 USAF); 305-482-301-0 (13/15 USN); 301-316-158- 0 (14 USAF); 301-316-158-0 (14 USN) This is a competitive acquisition to qualified sources. Please see attached. Mod 14 (USAF/USN): No. 4 Bearing is included in remanufacture. Two additional subCLINs have been added for Shaft and Stub Shaft replacement. Mod 13/15 (USAF/USN): SubCLIN has been added for Stage I Blades. 105 blades will be paid for each USAF module and 141 blades for each USN module. | 79% | Solicitation | 09/15/2026 |
INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT. THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited. The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc. The Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the of the NSN(s) listed below. | 78% | Market Research | 03/08/2024 |
The US Air Force Life Cycle Management Center (AFLCMC) F100 Program intends to issue a sole source “C”-type contract (named F100 Engine Exchange) to Pratt & Whitney (P&W), a Division of RTX Corporation for a “no-cost” exchange of property whereby the Government will deliver 51 F100-PW-220 engines to the Contractor, in exchange for the Contractor delivering 13 F100-229 new engine augmentor modules to the Government. A Sources Sought Synopsis (SSS) FA8124-RFI-AUG-2026 was posted from 4 August 2026 through 3 September 2026. Results from the SSS did not indicate any source other than P&W could perform the work under this contract at the prime level without the government incurring unacceptable delays and substantial duplication of costs not recoverable through competition. The government is awarding this contract under the authority of RFO 6.103-1,"Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." A Justification and Approval (J&A) for using Other Than Full and Open Competition was approved on 23 October 2026. All responsible sources may submit a capability statement to the Contracting Officer by the date listed in this notice to be considered by the agency. Respondents shall specify status as a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, economically disadvantaged women-owned small business, HUBZone small business, veteran-owned small business, or service-disabled veteran-owned small business. This synopsis does not constitute an Invitation for Bids (IFB) or a Request for Proposals (RFP), nor does it restrict the Government to an ultimate acquisition approach. The government will not reimburse any costs associated with preparing or submitting a response to this notice. Due to security access requirements, foreign participation is not permitted at the prime contractor level. Contracting Activity: AFLCMC/LPK, 3001 Staff Dr, Tinker AFB, OK 73145. | 72% | Pre-Solicitation | 11/17/2026 |
Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, longlead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below: Part Number: 2840 NSN: 2840-01-625-7346NZ Estimated Spares Requirement (QTY): 6 | 72% | Market Research | 01/20/2026 |
Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, longlead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below: Part Number: 4089050 NSN: 2840-01-582-2802NZ Estimated Spares Requirement (QTY): 3 | 72% | Market Research | 01/20/2026 |
Additional Details
Solicitation Number
FA812126R0004
Archive Date
May 16, 2026
Office Address
TINKER AFB, OK, 73145-3303