Notice ID: 624a2ca114cb486eb4cdf5110efbedd3Solicitation
Remanufacture of F108-201 Main Fuel Pump
Archived on September 26, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM UTC−05:00
- Posted
- September 6, 2024
- Notice type
- Solicitation
- NAICS
- 336412: Aircraft Engine and Engine Parts Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- FA8122 AFSC PZAAB
- Place of performance
- Tinker AFB, OK, 73145
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- FA812224Q0007
- Notice ID
- 624a2ca114cb486eb4cdf5110efbedd3
Description
This solicitation is being amended to incorporate Surge Option Clause 252.217-7001 and corresponding surge language in the SOW. This amendment also incorporates CDRL2 document and corresponding DIDS 81324C and 80969. The solicitation is being extended to 3 September 2024. Please see attached solicitation "FA8122 24 Q0007 updated" for above changes . This is a solicitation for a one-time buy type contract for the remanufacture of the F108-201 Main Fuel Pump. Offerors shall include the completed RFQ document (including prices, delivery, and clause fill ins) and return to the listed POCs no later than 30 August. No late proposals will be accepted. This is expected to be a sole source requirement and is subject to the Availability of Funds clause. Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). For Questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp . The actual SAR Package submission itself shall be submitted electronically through DoD SAFE https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the POC email addresses below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the POC email addresses below, and ask that they "Request a Drop-Off" to your email address via DoD SAFE, which will enable you to be able to Upload the SAR Submission Package documents to DoD SAFE. 29SCMS.SASPO.Workflow@us.af.mil and stacy.cochran@us.af.mil.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
FA812224Q0007- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Pre-SolicitationMay 15, 2024
Synopsis Remanufacture of F108-201 Main Fuel Pump
- 4×SolicitationCurrentJul 30, 2024
Remanufacture of F108-201 Main Fuel Pump
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, longlead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below: Part Number: 20105070 NSN: 2915-01-224-0753NZ Estimated Spares Requirement (QTY): 1 | - | Market Research | 12/03/2025 |
Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, longlead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below: Part Number: 20105100 NSN: 2915-01-244-5400NZ Estimated Spares Requirement (QTY): 4 | - | Market Research | 12/03/2025 |
1. Purpose Amendment 0001: The purpose of this amendment is to extend the response deadline to 19 November 2026/ 5 Pm CST to allow for additional industry feedback. This is a Sources Sought Synopsis issued for market research purposes only. This notice is not a solicitation, request for proposal, request for quotation, invitation for bid, or commitment by the Government to award a contract. The Government will not pay for any information, costs, or responses submitted in response to this notice. No solicitation is available at this time, and the Government does not intend to award a contract based solely on responses to this announcement. The Government may contact respondents to obtain additional information regarding their capabilities. 2. Requirement Description The Department of the Air Force is conducting market research to identify capable sources for a potential follow-on requirement for F138-100 engine sustainment supporting C-5M aircraft mission requirements. The current F138-100 Engine Sustainment contract is an indefinite delivery, indefinite-quantity service contract. The current contract was competitively awarded to Canadian Commercial Corporation. The anticipated requirement may include material management, engine maintenance, component support, engineering, airworthiness, and related sustainment services. The Government has not determined the acquisition strategy, contract type, period of performance, competition approach, or socioeconomic set-aside approach for any future requirement. 3. Anticipated Scope Interested parties should demonstrate their capability to perform some or all of the following functions: Provide material-management functions, engine maintenance, and subcontractor component-support services. Provide supply liaison support and depot-level maintenance and repair capability, including required equipment and tooling. Develop and update maintenance build plans using Reliability Centered Maintenance Plus principles. Comply with applicable Technical Order data and Time Compliance Technical Orders, including new or revised technical requirements. Support engineering investigations. Support Product Quality Deficiency Reports. Provide analytical condition inspections. Manage and use Government-furnished property, including Government-owned parts and equipment, as authorized and made available by the Government. Support and maintain certifications and compliance associated with airworthiness requirements. Integrate and coordinate peculiar support equipment. 4. Requested Capability Information Interested parties are requested to submit a concise capabilities statement addressing the following: a. Company Information Company name. Unique Entity Identifier. Commercial and Government Entity code, if available. Company address. Primary point of contact, including name, title, telephone number, and email address. Applicable NAICS codes listed in the company’s System for Award Management registration. Business size and socioeconomic status for NAICS 336412, including, as applicable: Small business; Small disadvantaged business; 8(a) participant; Women-owned small business; Economically disadvantaged women-owned small business; HUBZone small business; Service-disabled veteran-owned small business; Veteran-owned small business; or Other than small business. b. Technical Capability A description of the company’s capability to meet each anticipated scope area identified in Section 3. Identification of any scope areas the company cannot perform. Description of facilities, equipment, tooling, technical data access, quality systems, certifications, and workforce qualifications relevant to F138-100 or comparable military/commercial aircraft engine sustainment. Description of experience supporting airworthiness, technical-order compliance, engineering investigations, product quality deficiency reporting, and analytical condition inspections. c. Relevant Experience For each relevant effort performed within the past five years, provide: Customer name and contract number, if releasable; Period of performance; Brief description of work performed; Relevance to the anticipated requirement; Contract value or value range, if releasable; Prime contractor or subcontractor role; and Customer point of contact, if authorized for release. d. Teaming and Subcontracting Respondents proposing to use teaming arrangements or subcontractors should identify: Proposed prime contractor and each known teammate or subcontractor; Anticipated roles and scope allocation; Whether each entity is small or other than small business; Relevant prior teaming experience; and Any limitations, dependencies, or approvals affecting the arrangement. e. Small-Business Participation All respondents are requested to provide a reasonable estimate of anticipated small-business utilization as a percentage of total contract value, with supporting rationale. Identify the anticipated supplies or services suitable for small-business participation and the socioeconomic categories expected to be utilized. If a small business intends to compete as a prime contractor under a potential small-business set-aside, it should describe its planned approach to complying with applicable limitations on subcontracting, including: The anticipated percentage of contract performance to be performed by the prime contractor and similarly situated entities; The anticipated percentage of payments to be made to subcontractors that are not similarly situated entities; The anticipated division of work among teaming partners and subcontractors; and The basis for concluding that the proposed performance approach is achievable. Other than small businesses should also describe their anticipated approach to small-business subcontracting and their experience meeting small-business subcontracting commitments on comparable efforts. 5. Acquisition Strategy The Government has not determined an acquisition strategy for this potential requirement. Information received in response to this notice will be used to assess the availability and capability of industry sources and to inform potential competition and small-business participation strategies. The Government may consider full and open competition, a socioeconomic set-aside, or another acquisition approach, as appropriate. Nothing in this notice constitutes a commitment by the Government regarding any future acquisition strategy. | - | Market Research | 11/19/2026 |
Multiple Award Contract for Repair of TF33 2nd-4th Stage Turbine Nozzle Vanes. 1-year basic with 2 option years. Award will be based on technical acceptability (SAR approval for NSNs) and contractor responsibility. Please do not submit pricing as part of your proposal. Please sign and return one copy of the SF1449. Proposals MUST be submitted through the PIEE Solicitation module to be considered for award. | - | Solicitation | 12/02/2026 |
The US Air Force Life Cycle Management Center (AFLCMC) F100 Program intends to issue a sole source “C”-type contract (named F100 Engine Exchange) to Pratt & Whitney (P&W), a Division of RTX Corporation for a “no-cost” exchange of property whereby the Government will deliver 51 F100-PW-220 engines to the Contractor, in exchange for the Contractor delivering 13 F100-229 new engine augmentor modules to the Government. A Sources Sought Synopsis (SSS) FA8124-RFI-AUG-2026 was posted from 4 August 2026 through 3 September 2026. Results from the SSS did not indicate any source other than P&W could perform the work under this contract at the prime level without the government incurring unacceptable delays and substantial duplication of costs not recoverable through competition. The government is awarding this contract under the authority of RFO 6.103-1,"Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." A Justification and Approval (J&A) for using Other Than Full and Open Competition was approved on 23 October 2026. All responsible sources may submit a capability statement to the Contracting Officer by the date listed in this notice to be considered by the agency. Respondents shall specify status as a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, economically disadvantaged women-owned small business, HUBZone small business, veteran-owned small business, or service-disabled veteran-owned small business. This synopsis does not constitute an Invitation for Bids (IFB) or a Request for Proposals (RFP), nor does it restrict the Government to an ultimate acquisition approach. The government will not reimburse any costs associated with preparing or submitting a response to this notice. Due to security access requirements, foreign participation is not permitted at the prime contractor level. Contracting Activity: AFLCMC/LPK, 3001 Staff Dr, Tinker AFB, OK 73145. | - | Pre-Solicitation | 11/17/2026 |
Additional Details
Solicitation Number
FA812224Q0007
Archive Date
Sep 26, 2024
Office Address
TINKER AFB, OK, 73145-3303