GovChime
Notice ID: 695744ec689d4eea9a1e1278dd94739bSolicitation

B-52 Area 8 Stands

Archived on January 7, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−06:00
Posted
January 7, 2020
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
332312: Fabricated Structural Metal Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA8125 AFSC PZIMA
Place of performance
Tinker AFB, 73145
Last updated
Sep 25, 2026

Identifiers

Solicitation number
FA812520Q0026
Notice ID
695744ec689d4eea9a1e1278dd94739b

Description

***The purpose of this amendment is to hereby extend the due date, Post Question and Answers document, Replace the Item Description in its entirety,Replace Attachment A in its entirety (available by request only per the solicitation) and Updated the Technical Evaluation Criteria located in Clause 52.212-2 to coincide with the changes made on the Item Description and Attachment A.*** This is a solicitation notice for the procurement of five (5) B-52 Area 8 Stands. This is a set aside 100% for a small business. FOB Destination is Tinker AFB OK. Quotes will be accepted on or before the closing date stated on page 1 of the solicitation. When returning this Standard form 1449, please complete the following: 1. Please complete Company Information (Name & Address) and CAGE Code in Block 17a. 2. Please wet sign, put the name and title of signer, and date signed in blocks 30a., 30b., and 30c. respectively. 3. Please insert pricing on Page 3 along with net amount & delivery times 4. Please complete information in all “Fill-in” provisions and clauses, especially: a. FAR 52.212-3 (when applicable) b. FAR 52.225-18 5. Please provide a written statement to explain how your company is going to meet the technical evaluation criteria listed in FAR Clause 52.212-2.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:FA812520Q0026
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationDec 11, 2019

    B-52 Area 8 Stands

    Notice a5e59a03f93c4d05b663fe7ae9a5165d on SAM.gov

  2. 3×
    SolicitationCurrentDec 20, 2019

    B-52 Area 8 Stands

    Notice 695744ec689d4eea9a1e1278dd94739b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
DESCRIPTION: This is a Source Sought Notice Only- The Aerospace Maintenance and Regeneration Group (AMARG), Davis-Monthan AFB, AZ, requires a Large Component Blast Booth. This requirement is not currently anticipated to be solicited on a small business set-aside basis. However, a set aside will be contemplated, provided 2 or more qualified small business respond to this sources sought synopsis with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women- Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government wide Point of Entry. It is the responsibility of potential offers to monitor the Government wide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code is: 332311 Prefabricated Metal Building and Component Manufacturing. Size Standard: 750 Employees. The objective of this effort is to purchase a complete and Turn-Key design, construction, and installation of a new corrosion control facility at the 309th Aerospace Maintenance and Regeneration Group (AMARG), located within a controlled area of Davis-Monthan Air Force Base (DMAFB), Arizona. The primary function is the corrosion control of Aerospace Ground Equipment (AGE) and other ferrous related items. The media blast booth will be housed within a fully enclosed Pre-Engineered Metal Building (PEMB) that also provides a separated maintenance support operations area (MX Ops Area). The entire facility shall be constructed on a currently unimproved site located North of Building 7213 (the Small Paint Booth). The performing contractor is responsible for providing all management, professional services, labor, materials, and equipment to deliver a fully functional and operational facility. INDUSTRY DAY: The Air Force is hosting an Industry Day on 8 December 2026 at Davis-Montham AFB and AMARG. Interested vendors must request access and event details by contacting Christian Cross or Brent Perry. All access requests and registration details must be submitted no later than the RSVP deadline on 1 December 2026. (Please see INSTRUCTION 9 for POC information.) INSTRUCTION: In response to this Sources Sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8 (a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. 4. Information to help determine if the requirement is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the USAF can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. 7. Recommendations to improve the approach/specifications/drawings/PWS/PRS to acquiring the identified items. 8. Please include the number FA8227-27-SS-AMARGLCBB in your email response to preclude your reply being treated as JUNK or SPAM. 9. Questions regarding the market survey and/or industry day should be addressed to both Mr. Christian Cross by email christian.cross@us.af.mil and Mr. Brent Perry by email brent.perry.2@us.af.mil. Attachments: – DRAFT 309 AMARG LCBB SOW (09NOV26)
57%
Market Research12/18/2026
The U.S. Embassy in Guatemala requires the acquisition and installation of a floating dock system for the Bureau of International Narcotics and Law Enforcement Affairs (INL) in support of the Guatemalan Government.
55%
Solicitation12/04/2026
9/21/2026: USACE posts the Bid Abstract 9/17/2026: Bidders please fill out the Schedule of Prices. We know that a CLIN was left off in Section B, so please disregard filling out that part. The Schedule of Prices is what we will use USACE - Rock Island - This project involves the fabrication and delivery of new bolted Tainter gates for Lock and Dam 21. The work includes the off-site fabrication of tainter gates, measuring approximately 20 feet high by 64 feet long, which are comprised of cold-rolled shapes and welded assemblies. These welded assemblies must comply with AWS D1.1 standards and are designed without fracture-critical members to enhance structural reliability. No amendment: just info on CADD modelPlease contact joseph.e.porter@usace.army.mil for CADD MODEL
55%
Solicitation09/17/2026
Please see the RFQ AMEND 0001 N6523626QE091 AND RFQ N6523626QE091 Attachments: To be considered for this procurement fill out and submit 3 documents: Attachment_1 Quote Spreadsheet, Attachment_3 Certs and Reps and your Companies Quote. **This is a Small Business (SB) Set Aside, to be considered your company must be registered in SAM.gov as a SB******In order for vendors to respond to notices and solicitations using SOL, they will need the following accounts and roles. SAM.gov - Registered Entity Getting Started with Entity Registration (Vendor) Quick Start Links: https://www.fsd.gov/gsafsd_sp/en Getting Started with Entity Registration PIEE - Proposal Manager Role https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml Web Based Training for the PIEE Solicitation Module (Vendor)Registration Instructions for the PIEE Solicitation Module (Vendor) ***The above links will be included in all SOL notices that are posted to SAM.gov. Vendor Support is available by phone at 866-618-5988, or email: disa.global.servicedesk.mbx.eb-ticket-requests@mail.mil ***
54%
Combined Synopsis02/25/2026
Requirement extended. Please note updated Ordering Data Sheet (ODS). If there is no change to your current quote, send an email to that fact. The final ODS is updated now see: ODS - 6072VL05- Final Update Rev 3 Request for Quote To ensure your quote is considered, please provide the following information: 1. Product Details: Specify the product you are offering, including its part number if applicable. Include a comprehensive specification sheet (e.g., Data Sheet, Tech Specs, Cut Sheet) for the item you are proposing. 2. Pricing: Your Unit Cost must include all shipping and freight charges. Do not list shipping/freight separately. Quotes based on FOB Origin will be rejected. 3. Delivery: Clearly state your proposed delivery lead time (e.g., "30 days ARO"). 4. Company Information: Provide your Company's Cage Code (from SAM.gov) for our reference. 5. Invoicing and Payment: Invoicing and payment will follow clause 252.232-7006. Payment will be made only after proof of delivery. 6. Submission Requirements: Sign Block 30a and Print your Name in Block 30b on the attached solicitation. This is mandatory for your quote to be considered responsive. 7. Evaluation Factors: For a complete list of all factors used to evaluate quotes, please refer to clause 52.212-2.
53%
Solicitation05/21/2026

Additional Details

Solicitation Number

FA812520Q0026

Archive Date

Jan 7, 2021

Office Address

TINKER AFB, OK, 73145-3303