Notice ID: ba8cbc0c891642fa979047d86fd7f0ebSolicitation
PIGA FLOAT ASSEMBLY REPAIR
Archived on July 15, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:30 PM UTC−06:00
- Posted
- May 26, 2021
- Notice type
- Solicitation
- NAICS
- 811219: Classification Not Available
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- FA8214 AFNWC PZBB
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- FA821420R7010
- Notice ID
- ba8cbc0c891642fa979047d86fd7f0eb
Description
Request for Proposal - Pendulous Integrated Gyroscopic Accelerometer (PIGA) Float Repair FY22_FY26
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
FA821420R7010- Market Research
- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Market ResearchSep 14, 2020
PIGA FLOAT ASSEMBLY REPAIR
- Pre-SolicitationMar 10, 2021
PIGA FLOAT ASSEMBLY REPAIR
- 2×SolicitationCurrentMar 31, 2021
PIGA FLOAT ASSEMBLY REPAIR
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
1. NOTICE: This is not a solicitation but rather a Sources Sought to determine potential sources for information and planning purposes only.1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Size standard of $34M. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small business to include Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.1.2 This sources sought synopsis does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed.2. Program Details:The Air Force is issuing this repair sources sought announcement as part of a market research survey to determine if additional sources exist that could become qualified for repair and restoration of the F-16 Radar Multiplier Assembly. The contractor would be required to repair and restore the F-16 Radar Multiplier Assembly to a serviceable condition, but not like new cosmetically. Responses to this Notice shall consist of an initial white paper (not to exceed 3 pages) describing the offeror?s capabilities with regard to trouble shooting, testing and repairing the F-16 items. The specific parts involved are as follows: FSC: 6625NIIN: 01-124-0226MMAC: WFPart #: 12604334-1NSN#: 6625-01-124-0226 Interested organizations who feel they possess the necessary capabilities should respond by providing the Government the following information: a point of contact, address, telephone, and fax numbers, email address, UEI number, CAGE code, and/or tax ID number, as well as size category, (large, small, small disadvantaged, etc.), a brief summary of the company?s capabilities, description of facilities, personnel, related manufacturing experience, and existing safety approvals (refer to the white paper listed above).Provide any supporting information such as commercial literature, catalogues, manuals, etc. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must meet the criteria specified herein as well. Responses to this Notice are due on or before 04-17-2026. All information marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities.NOTE: Source Approval Request (SAR) packages are not the same as a Sources Sought Response. For instructions on how to become a qualified approved source contact the listed Source Development Specialist. Offerors must possess access to all appropriate data. Data verification information can be found in the RQR and RDL report for the items listed above. Technical Data Package and Drawing requests are to be made to The Public Sales Office at Tech Order Manuals: AFLCMC.LZP.PUBSALES@us.af.mil Engineering Data/Drawings: AFLCMC.LZP.TINKERPUBLICSALES@us.af.milFor instructions on how to become a qualified approved source, see the RQR and RDL attached to this posting. Please e-mail all SAR packages to the following:Tracey Beringer, Source Development Specialist, tracey.beringer@us.af.milVeronika Pett, veronika.pett@us.af.milDarin Rector, darin.rector@us.af.milThe announcement on Sam.gov is just for responses to the sources sought notice and is not a deadline for SAR submission. You may submit a SAR at any time. | 65% | Market Research | 04/18/2026 |
This requirement is for the repair and restoration of the Array Brazing Assembly to a serviceable condition. The qualified repair source/contractor will repair the item per OEM specification, approved technical orders and methods approved through the cognizant engineer at the time of qualification or during continuing qualification. Array Brazing Assembly item repairs are categorized as just-in-time repairs, not scheduled repairs. The contractor shall provide and maintain all the capabilities to test and repair the mentioned items to serviceable ?A? condition such as, but not limited to, all the expertise, labor, tools, equipment, and parts in order to deliver the serviceable items within the time period specified on the contract. The contractor shall maintain test and repair records that include cost accounting records of all items serviced under the contract.NSN: 1270-01-077-8078WF. Amendment 0002 incorporate clause 52.222-90. Amendment 0003 extends the proposal due out date to 22 June 2026. Amendment 0004 extends the proposal due out date to 21 August 2026. Amendment 0005 extends the proposal due out date to 30 November 2026. | 62% | Solicitation | 08/21/2026 |
40 each of NSN 1420-00-435-1313. | 49% | Solicitation | 11/18/2026 |
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | 49% | Market Research | 12/07/2026 |
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | 49% | Market Research | 12/07/2026 |
Additional Details
Solicitation Number
FA821420R7010
Archive Date
Jul 15, 2021
Office Address
HILL AFB, UT, 84056-5837