GovChime
Notice ID: d1e812a550f94b159fa6584561cdc790Award NoticeAwardedArchived

AEWS AN/FPS-117 Radome Replacement Program

Awarded on May 20, 2026. Full description on SAM.gov.

Awarded tounder FA821726DB013 (source: SAM.gov award notice)• $52.0M

Overview

Posted
May 20, 2026
Notice type
Award Notice
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.ELECTRONIC SYSTEMS.FA8217 AFLCMC HBDK
Place of performance
Hill Air Force Base, Utah, 84056
Last updated
Oct 30, 2026
First published
Last updated on SAM.gov
Award date
May 20, 2026
Award amount (SAM.gov award notice)
$52.0M

Identifiers

Solicitation number
FA821725RB002_Award_Notice
Notice ID
d1e812a550f94b159fa6584561cdc790
Award number (PIID)
FA821726DB013

Description

The Air Force Life Cycle Management Center (AFLCMC) Atmospheric Early Warning System (AEWS) Program Management Office (PMO) awarded a single five (5) year Indefinite Delivery/Indefinite Quantity (ID/IQ) contract (with a two year option to extend the term of the contract IAW 52.217-9) for the AEWS AN/FPS-117 Long Range Radome Replacement Program (RFP FA821725RB002).

  • Contract Award Date: 20 May 2026
  • Contract Award Number: FA821726DB013
  • Contractor Awarded Name: IAP World Services, Inc.
  • Contractor Awarded Address: 6905 N Wickham RD STE 500 Melbourne, Florida 32940-7553, United States
  • ID/IQ Ceiling: $52,000,000.00

Full description on SAM.gov

Award Overview

Award Number

FA821726DB013

Award Amount (SAM.gov award notice)

$52.0M

Award Date

May 20, 2026

Awardee

Awardee UEI

NRM4CHKGTCE7

Awardee CAGE Code

7S660

Awardee Address

Melbourne, FL 32940, UNITED STATES

Original Solicitation

Notice ID: d1e812a550f94b159fa6584561cdc790

Posted Date: May 20, 2026

Original Response Deadline: Not specified

Task Orders Under This IDV

Top 10 by total obligated

1
  • FA821726FB301
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $14.5MSigned May 20, 2026

More From This Vendor

Top 5 most recent

5
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned Jun 5, 2026
  • W911SR23D0035
    IAP WORLD SERVICES, INC
    Department of DefenseNAICS 811210
    —Signed Jun 5, 2026
  • FA821726FB301
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $14.5MSigned May 20, 2026
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned May 20, 2026
  • FA821726DB014
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    —Signed May 20, 2026

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (34)

  • Amendment 0004.zip

    4.8 MBAdded in Solicitation version 13Posted
    Download
  • FPS-117_All Vendor Questions and Govt. Responses_v5.xlsx

    63 KBAdded in Solicitation version 13Posted
    Download
  • Amendment 0003.zip

    4.9 MBAdded in Solicitation version 11Posted
    Download
  • FPS-117_All Vendor Questions and Govt. Responses_v4.xlsx

    62 KBAdded in Solicitation version 11Posted
    Download
  • FPS-117_All Vendor Questions and Govt. Responses_v3.xlsx

    61 KBAdded in Solicitation version 10Posted
    Download
  • FPS-117_All Vendor Questions and Govt. Responses_v2.xlsx

    56 KBAdded in Solicitation version 9Posted
    Download
  • Amendment 0002.zip

    4.8 MBAdded in Solicitation version 9Posted
    Download
  • Amendment 0001.zip

    11 MBAdded in Solicitation version 7Posted
    Download
  • FPS-117_All Vendor Questions and Govt. Responses.xlsx

    55 KBAdded in Solicitation version 7Posted
    Download
  • 31P1-2GPS-14 - Illustrated Parts Breakdown Radome CW-396AGPS.PDF

    553 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • 31P1-2GPS-15 - Installation Instructions Rigid Radome CW-396AGPS CW- 396BGPS.pdf

    14 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • 31P3-2FPS6-232-7 Installation Instructions Tower AB-259FPS-6.pdf

    106 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • 31P6-2FPS3-375 - Installation Instructions Arctic Tower AB-199AFPS-3 Kokee Only.pdf

    3.2 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • AB-199 DWGs.zip

    17 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • AB-259 DWGs.zip

    67 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • Arctic Tower Drawings.zip

    1.3 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • Engineering Specification for the ANFPS-117 Radar Radome (Document No. 20250725 CAGE 98747).pdf

    793 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • S-7078-2 Base Mounting Ring Layout 55 Radome.pdf

    57 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • TM 87-13_COTS - ESSCO Model M55-70-9100 Radome.pdf

    4.9 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • Solicitation - FA821725RB002.pdf

    2.6 MBAdded in Solicitation version 4Posted
    Download
  • Attachment 1 - Basic Contract PWS.pdf

    1.1 MBAdded in Solicitation version 4Posted
    Download
  • Attachment 2_Section L_Instructions Conditions and Notices to Offerors.pdf

    194 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 3_Section M_Evaluation Factors for Award.pdf

    178 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 4_Cross Reference Matrix.xlsx

    22 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 5_Pricing Matrix Worksheet.xlsx

    38 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 6_Preaward Survey of Prospective Contractors.pdf

    155 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 7 - FPS-117 CDRLs.pdf

    2.7 MBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.1 Long Range Site Locations and Addresses.pdf

    113 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.2 Example Comment Resolution Matrix (CRM).xlsx

    24 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.3 Memorandum for Alaska Radar System Support.pdf

    219 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.4 PACAF Regional Support Center Site Arrival Request (SAR).pdf

    2.7 MBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.5 Customer Support Request - Third Party Request.pdf

    191 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.6 LRR Radome Contract Schedule.xlsx

    13 KBAdded in Solicitation version 4Posted
    Download
  • Offeror_RFP_Question_Template.xlsx

    10 KBAdded in Solicitation version 4Posted
    Download

Lifecycle

  1. 2
    Version 2SolicitationArchived

    AEWS AN/FPS-117 Radome Replacement Program

    Notice 9d1aae45443e4d298b5515ded9a22ea1 on SAM.gov

  2. 5
    Version 5Award NoticeArchivedCurrent

    Type changed from Solicitation to Award Notice

    AEWS AN/FPS-117 Radome Replacement Program

    Notice d1e812a550f94b159fa6584561cdc790 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
04 Sep 2025- Following multiple interactions with industry partners regarding government property concerns, as it relates to the reacquisition of the Instrumentation Range Support Program (IRSP) contract, the Government is undertaking a reevaluation of its current strategy. This decision reflects our commitment to ensuring a fair and competitive bidding environment for all interested firms. To facilitate this reevaluation, the reacquisition process for IRSP IV will be temporarily placed on hold. During this period, the Government will be diligently working to refine and finalize the requirements package as it relates to government property, ensuring it provides industry with the most accurate and complete information possible to promote fair competition. 13 Jun 2025- The submission/response date for RFI#02 has been extended to 3:30 EST PM on 16 Jun 2025. 29 May 2025- RFI#02 Requesting additional information from industry to identify the capabilities to complete a pre-overhaul and overhaul of systems associated with the questions and answers from Industry Day - Q55 & Q58. To include the possibility of concurrent overhauls being conducted at multiple locations across the globe. Four CDLRs have been added, along with the RFI #02 document. 16 May 2025- RFI#01 Posting questions and answers from industry's sources sought notice recommendations/comments (29 Jan 2025) and Industry Day event (24 Apr 2025). 01 May 2025- Adding the Industry Day Sign-in sheet. 25 Apr 2025 - Adding the slide deck that was briefed by the Government team members during the Industry Day (except for the photos and video). The Government is requesting that any additional questions concerning IRSP be submitted to the contracting team members NLT 4:30 PM EST on 02 May 2025. Please provide your questions and/*or comments by using the Company Question Sheet. The Government intent is to have a response to all recommendations/comments/questions recieved during the intial Sources Sought notice and the Industry Day posted on sam.gov by 16 May 2025. Please note- If a company would like to submit a capabilities package to the Government based on the Sources Sought Synopsis (posted on 29 Jan 2025) it may do so by sending it to the contracting team members listed within this notice. --------------------------------------------------------------------------------------------------------------------------------- 18 Apr 2025 - The below documents have been uploaded for review prior to the Industry Day event. IRSP IV Draft SOWv4 (18 Apr 2025) Attachment 5 - Stock Replenishment, Concept of Operations (CONOPS) Attachment 7 - System Summary Attachment 7a - Supported Range System List (Template) Attachment 8 - Range Resource List Attachment 11 PALT Thresholds (v2) --------------------------------------------------------------------------------------------------------------------------------- An Industry Day conference will be held for the purpose of providing all interested parties an opportunity to participate in the initial planning and strategy for the acquistion of the IRSP IV procurement. Please see the Industry Day Notice letter, attachment 1 and attachment 2 for additional information concerning this event. Note: The Government will be posting an IRSP IV Statement of Work and associated documents prior to 24 Apr 2025.
49%
Special Notice06/16/2025
The purpose of this requirement is for HMIT Test Stand Support on a 3 year BPA Sole Source.
46%
Solicitation11/18/2026
DESCRIPTION: 415 SCMS Strategic MAC IDIQ The scope of this MAC IDIQ includes, but is not limited to, Test, Teardown and Evaluation (TT&E), Minor Repair(s), Major Repair(s), Total Rebuild(s), as well as other ancillary requirements in direct support of a repair contract, such as Other Direct Costs (ODCs), Engineering Change Proposals (ECPs), verification, testing, etc. Level(s) of repair effort will be determined by the Government at the task order level. National Stock Number(s) (NSNs) and quantity will be determined by the Government at the task order level. The contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and restore requirements to a serviceable condition. Orders issued under this MAC IDIQ will utilize Firm-Fixed Price pricing arrangement. Evaluation criteria will be established at the task order level and may be price-only, trade-off, etc. Contracting Office: AFMC OL_H/PZAAA, Space & C3I Contracting Address: 6050 Gum Lane, Bldg. 1215 Hill AFB, Utah 84056 Awardee(s): Decryptor, Inc., Richardson, Texas, FA825026DB001 Design Criteria, Inc., Roy, Utah, FA825026DB002 Diamond Antenna & Microwave Corporation, Littleton, Massachusetts, FA825026DB003 DuoTech Services LLC, Franklin, North Carolina, FA825026DB004 Elbit America, Inc., Fort Worth, Texas, FA825026DB005 Everaxis USA, Inc., Naples, Florida, FA825026DB006 G&S Test Solutions LLC, Oviedo, Florida, FA825026DB007 Linmarr Associates, Inc., Irvine, California, FA825026DB008 Potomac Electric Corp, Boston, Massachusetts, FA825026DB009 Serco, Inc., Herdon, Virgina, FA825026DB010 Southwest Research Institute, San Antonio, Texas, FA825026DB011 Telecommunication Support Services, Inc., West Melbourne, Florida, FA825026DB012 CPI Electron Device Business, Inc., Beverly, Massachusetts, FA825026DB013 J-Squared Technologies (North Carolina), Inc., Berkeley Lake, Georgia, FA825026DB014 Kihomac, Inc., Reston, Virgina, FA825026DB015 Pro-Comm, Inc., Brick, New Jersey, FA825026DB016 United States Technologies, Inc., Fair Lawn, New Jersey, FA825026DB017 Ludlum Measurements, Inc., DBA: VPI Technology, Draper, Utah, FA825026DB018 Contract Award Dollar Amount: $300,000,000.00 MAC IDIQ Ceiling Contract Award Date: 30 July 2026 ONBOARDING PROCEDURES: The Government intends to establish the awardee pool by competitively awarding multiple-award IDIQ contracts. During the first year, the contract will allow semi-annual onboarding opportunities. After the first year, the contract will allow annual onboarding opportunities. All onboarding notifications and opportunities will be made public on SAM.GOV. Onboarding will allow new contractors to qualify, and if approved, be awarded a basic contract. Onboarding will also allow current contractors of the MAC IDIQ to qualify for additional NSNs. All contractors must qualify IAW Repair Qualification Requirements (RQR) in order to be considered for award. Current contractors will not be required to recompete during onboarding, unless they wish to qualify on additional NSNs. Once onboarding is complete, added awardees will be included in the awardee pool and to compete on future task orders. New contractors will be required to submit a CPP as a first task order IAW the basic PWS. The ordering period for new awardees will coincide with the initial awardees’ ordering period and shall not extend the overall term of the ordering period or the basic contract ordering period. The PCO will provide written notification to contractors when onboarding procedures are to take place. COMPLIANCE: Must be eligible to receive Government contracts. Contractors must also comply with: DFARS 252.204-7020 NIST SP 800-171 DoD Assessment Requirements, DFARS 252.204-7021 Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements, DFARS 252.204-7025 Notice of Cybersecurity Maturity Model Certification Level Requirements (the CMMC level required by this contract is Level 2 (Self)) and FAR 52.204-29 Federal Acquisition Supply Chain Security Act Orders – Representation and Disclosure. CMMC status must be verifiable in the Supplier Performance Risk System (SPRS). If you are interested in participating, please see the attached documents. If you have any questions, please contact the PCO.
46%
Special Notice12/30/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
43%
Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
43%
Market Research12/07/2026

Additional Details

Solicitation Number

FA821725RB002_Award_Notice

Archive Date

Jun 4, 2026

Office Address

HILL AFB, UT, 84056-5838