GovChime
Notice ID: 16f391fcce6f4c1297d026d0a9fa904cAward NoticeAwardedArchived

AEWS AN/FPS-124 Radome Replacement Program

Awarded on May 20, 2026. Full description on SAM.gov.

Awarded tounder FA821726DB014 (source: SAM.gov award notice)• $40.0M

Overview

Posted
May 20, 2026
Notice type
Award Notice
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.ELECTRONIC SYSTEMS.FA8217 AFLCMC HBDK
Place of performance
Hill Air Force Base, Utah, 84056
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov
Award date
May 20, 2026
Award amount (SAM.gov award notice)
$40.0M

Identifiers

Solicitation number
FA821725RB003_Award_Notice
Notice ID
16f391fcce6f4c1297d026d0a9fa904c
Award number (PIID)
FA821726DB014

Description

The Air Force Life Cycle Management Center (AFLCMC) Atmospheric Early Warning System (AEWS) Program Management Office (PMO) awarded a single five (5) year Indefinite Delivery/Indefinite Quantity (ID/IQ) contract (with a two year option to extend the term of the contract IAW 52.217-9) for the AEWS AN/FPS-124 Short Range Radome Replacement Program (RFP FA821725RB003). This effort is for the purchase and installation of new radomes.

  • Contracting office and address: AFLCMC/ESGK, 6039 Warleigh Rd Bldg 1206 Hill AFB, UT 84056
  • Contractor Awarded Name: IAP World Services, Inc.
  • Contractor Awarded Address: 6905 N Wickham RD STE 500 Melbourne, Florida 32940-7553, United States
  • ID/IQ Ceiling: $40,000,000.00
  • Contract Award Date: 20 May 2026
  • Contract Award Number: FA821726DB014

Full description on SAM.gov

Award Overview

Award Number

FA821726DB014

Award Amount (SAM.gov award notice)

$40.0M

Award Date

May 20, 2026

Awardee

Awardee UEI

NRM4CHKGTCE7

Awardee CAGE Code

7S660

Awardee Address

Melbourne, FL 32940, UNITED STATES

Original Solicitation

Notice ID: 16f391fcce6f4c1297d026d0a9fa904c

Posted Date: May 20, 2026

Original Response Deadline: Not specified

Task Orders Under This IDV

Top 10 by total obligated

2
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned Jun 5, 2026
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned May 20, 2026

More From This Vendor

Top 5 most recent

5
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned Jun 5, 2026
  • W911SR23D0035
    IAP WORLD SERVICES, INC
    Department of DefenseNAICS 811210
    —Signed Jun 5, 2026
  • FA821726FB301
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $14.5MSigned May 20, 2026
  • FA821726FB302
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    $4.6MSigned May 20, 2026
  • FA821726DB013
    IAP WORLD SERVICES, INC.
    Department of DefenseNAICS 811210
    —Signed May 20, 2026

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (32)

  • FPS-124_All Vendor Questions and Govt. Responses_v6.xlsx

    47 KBAdded in Solicitation version 12Posted
    Download
  • Amendment 0004.zip

    4.8 MBAdded in Solicitation version 12Posted
    Download
  • Amendment 0003.zip

    4.8 MBAdded in Solicitation version 10Posted
    Download
  • FPS-124_All Vendor Questions and Govt. Responses_v5.xlsx

    46 KBAdded in Solicitation version 10Posted
    Download
  • FPS-124_All Vendor Questions and Govt. Responses_v4.xlsx

    45 KBAdded in Solicitation version 9Posted
    Download
  • FPS-124_All Vendor Questions and Govt. Responses_v3.xlsx

    43 KBAdded in Solicitation version 8Posted
    Download
  • Amendment 0002.zip

    4.8 MBAdded in Solicitation version 7Posted
    Download
  • FPS-124_All Vendor Questions and Govt Responses_v2.xlsx

    42 KBAdded in Solicitation version 7Posted
    Download
  • Amendment 0001.zip

    6.2 MBAdded in Solicitation version 6Posted
    Download
  • FPS-124_All Vendor Questions and Govt Responses.xlsx

    44 KBAdded in Solicitation version 6Posted
    Download
  • ICD_1209044_Interface Control Document Between SRR Equipment and SRRS Facility.PDF

    1.2 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • ICD_1209036_Interface Control Document Between SRR AntennaTransmitter Pedestal and SRRS Facility.pdf

    292 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • ICD_1209037_Interface Control Document Between SRR PMFI Dipole Assemblies and SRR Facility.pdf

    220 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • ICD_1209045_Interface Control Document Between Radome for ANFPS-124 Radar and the NWS CAG Communications Equ.pdf

    224 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • ICD_1209035_Interface Control Document Between SRR and SRR Facility.pdf

    264 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • Project_87_CEU_19_CEU_SZ123_8711_P-2xx - Radar Tower SRR Facilities.pdf

    15 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • S2-31P1-4-1903-8_User Radome Model S27-87.pdf

    3.7 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • AN-FPS-124 Radome Spec V1.0.pdf

    567 KBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • 31P7-2FPS124-1-1_Combined Operation and Maintenance Organization Level Radar Set ANFPS-124V.pdf

    37 MBAdded in Solicitation version 5Posted
    Requires SAM.gov sign-in
  • Solicitation - FA821725RB003.pdf

    2.6 MBAdded in Solicitation version 4Posted
    Download
  • Attachment 1_Basic Contract PWS.pdf

    1.0 MBAdded in Solicitation version 4Posted
    Download
  • Attachment 2_Section L_Instructions Conditions and Notices to Offerors.pdf

    195 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 3_Section 3_Evaluation Factors for Award.pdf

    181 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 4_Cross Reference Matrix.xlsx

    21 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 5_Pricing Matrix Worksheet.xlsx

    38 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 6_Preaward Survey of Prospective Contractors.pdf

    155 KBAdded in Solicitation version 4Posted
    Download
  • Attachment 7_FPS-124 CDRLs.pdf

    2.3 MBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.1 Short Range Site Shipping Addresses.pdf

    125 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.2 Example Comment Resolution Matrix (CRM).xlsx

    24 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.3 Customer Support Request - Third Party Request.pdf

    191 KBAdded in Solicitation version 4Posted
    Download
  • PWS Attachment_5.1.4 SRR Radome Contract Schedule.xlsx

    32 KBAdded in Solicitation version 4Posted
    Download
  • Offeror_RFP_Question_Template.xlsx

    10 KBAdded in Solicitation version 4Posted
    Download

Lifecycle

  1. 2
    Version 2SolicitationArchived

    AEWS AN/FPS-124 Radome Replacement Program

    Notice a9b270044f0b48d5a725478261fa52f1 on SAM.gov

  2. 5
    Version 5Award NoticeArchivedCurrent

    Type changed from Solicitation to Award Notice

    AEWS AN/FPS-124 Radome Replacement Program

    Notice 16f391fcce6f4c1297d026d0a9fa904c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
NOTICE TYPE: Pre-Solicitation; Proposed Sole Source Contract Action SOLE SOURCE AUTHORITY: RFO FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements (See attached J&A for approval). The Department of the Air Force (USAF) hereby publicizes its intent to solicit, negotiate and award a sole-source, Five (5) Year Indefinite Delivery, Indefinite Quantity (IDIQ), Firm-Fixed-Price (FFP) contract to Applied System Engineering, Inc. (ASE) (CAGE: 3Z966), located at 7510 Benbrook Parkway Fort Worth, Texas 76126 for the repair of various Transmitters. This acquisition is being conducted under the authority of RFO FAR 6.103-1 (Only one responsible source and no other supplies or services will satisfy agency requirements). Applied System Engineering, Inc. (ASE) (CAGE: 3Z966) is the original equipment manufacturer (OEM) and the only source with the proprietary technical data, specialized tooling, and engineering expertise required to perform these services without causing unacceptable delays or duplication of costs. SCOPE OF WORK: For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. TEST, TEARDOWN, AND EVALUATION (TT&E): The contractor shall perform visual, mechanical and electrical testing of the end item, reusable or replacement component parts, and materials according to the schedule in the contract to determine the condition of the end item. Upon completion of this task, all of the components of the end item requiring repair or replacement will be identified by part number, NSN (if applicable), nomenclature, and location in the assembly. This information will be reported in writing to the Procurement Contracting Officer (PCO)/ Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) and, if necessary, approval to repair will be negotiated. If no further repair is required, the asset must be returned in serviceable like new condition. REPAIR: The contractor shall perform the repair or replacement of all failed parts and components. Each end item must be cleaned, configured, refinished, and tested to meet the original specifications of the end item. The end item shall be returned in serviceable like new condition. Item Description(s), National Stock Number(s) (NSNs), and Part Number(s): Transmitter, Radar (AN/MST-T1(V) MINI-MUTES) 5840-01-475-2319 63804-1H Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-644-8215 105103-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-505-2519 74501-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-508-1032 75502-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-656-4618 125606-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1845 101702-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1847 115206-3 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1848 115306-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-2806 103802-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-0850 91101-01 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-2542 91101-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-4499 91102-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-4500 91102-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-3010 91103-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-617-0146 62704-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-598-6408 87001-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-599-9081 79106-1 This notice is not a request for competitive proposals or quotes; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Any capability statements received within 15 calendar days of publication of this notice will be evaluated solely to determine whether to conduct a competitive acquisition. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. This pre-solicitation is notice for a Sole Source Solicitation, which will be issued later this year. The entire solicitation and any/all attachments will be made available only on the SAM.gov website. All current and future information about this acquisition, i.e. solicitation, amendments, purchase specifications, and Q&A's will be distributed through SAM.gov. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. One or more of the items under this acquisition are subject to Free Trade Agreements. IAW DAFMAN 16-201, there are no restrictions on foreign participation.
-Pre-Solicitation11/05/2026
The purpose of this requirement is for HMIT Test Stand Support on a 3 year BPA Sole Source.
-Solicitation11/18/2026
Sole source award to BAE for F-16 Transducer repair.
-AwardedOpen

Additional Details

Solicitation Number

FA821725RB003_Award_Notice

Archive Date

Jun 4, 2026

Office Address

HILL AFB, UT, 84056-5838