GovChime
Notice ID: 17985a448ef3430c81242e58ea893dbcSolicitation

F-22 Horizontal Stabilator Fixture Load Cell Upgrade

Archived on September 23, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−06:00
Posted
August 8, 2024
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
541420: Industrial Design Services
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA8224 AFSC OL H PZIM
Place of performance
Hill AFB, UT, 84056
Last updated
Dec 4, 2025

Identifiers

Solicitation number
FA822424R0018
Notice ID
17985a448ef3430c81242e58ea893dbc

Description

The F-22 depot facility on Hill AFB, UT needs to add time-savings and labor-saving functions and capabilities to (8) Government Furnished horizontal stabilator fixtures. These fixtures are used for the USAFs F22 aircraft maintenance and production processes. This fixture is used to hold and manipulate the F-22 horizontal stabilator during production processes. These processes include paint/coatings removal and paint/coatings spray and replacement. The HS fixtures allow technicians to raise, lower and rotate the F-22 workpiece, which enables technicians to reach all surfaces of the work piece without the use of elevated work stands, platforms or ladders. The weighing operation occurs when technicians record the total static weight of horizontal stabilator. The current process requires the work piece to be removed from the HS fixture by overhead crane, to perform required weight measurements. A handling crew is assembled to perform a crane-assisted move, which suspends the workpiece for the hanging weight scale measurements. A built-in weight scale will eliminate the work required by a handling crew. The contractor will modify and install upgrades to 8 GF fixtures per the accepted design. The contractor will have the option to perform work at the contractors facility, or at a location TBD on Hill AFB. If work is to be performed at the contractors facility, the contractor shall be responsible for all equipment and cost associated with the transportation of the 8 GF fixtures. The contractor will be allowed to perform work on a maximum of 2 GF fixtures at a time. The contractors initial proposal shall indicate where work will be performed. The Statement of Work (SOW) specifies the requirements to design, validate, fabricate, install, and verify the new capabilities and functions of the horizontal fixture. These new functions and capabilities are listed in the Statement of Work. The SOW is a controlled document and will only be distributed to small business contractors able to work under NAICS 541420 (Industrial Design Services). Please provide a current form DD 2345 and your CAGE CODE when requesting the SOW to review from the POC kevin.hutchison.2@us.af.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:FA822424R0018
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentAug 8, 2024

    F-22 Horizontal Stabilator Fixture Load Cell Upgrade

    Notice 17985a448ef3430c81242e58ea893dbc on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Questions and Answers from Industry day are posted. See attachment below. The Air Force intends to have an Industry Day to prepare to synopsize, solicit and award the following commodity: The Contractor shall perform upgrades of Advanced Fuel Accessories Test System (AFATS) 02-02 Test Stand and AFATS Calibration Cart, providing all components and parts required. The attached draft Statement of Work (SOW) establishes the minimum requirement for the upgrade of AFATS 02-02 (P/N 8230001-0501), and training on the maintenance, calibration, programming, and use of said test stand. The test stand will primarily be used to test fuel flow proportioners and float valves in accordance with their relevant Technical Orders (T.O.’s), but will also be used as needed to test refueling receptacles, transfer pumps and other similar components as per their relevant T.O.’s. The following also includes the minimum requirement for the upgrade of a currently nonfunctional calibration cart (P/N: 8231300-0501) for use in calibrating flowmeters and electrical parameters on this system and other existing AFATS configurations. Contemplated Contract Type Firm-Fixed Price PSC 4920 NAICS 488190 Small Business Size Standard – 750 EMPL System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. Event Schedule & Deadline The site visit will take place on 17 Sep 2026 from 10:00 AM – 12:00 PM CST (participants will be required to meet at 8:30 AM, additional instructions to follow). Deadline to RSVP for the site visit is 14 Sep 2026 by 10:00 AM CST. RSVP Submission Requirements To register for the site visit, please email Tran.Tran.1@us.af.mil by the deadline above. Your email must include the following details for each attendee: Attendee Names - Full legal name of each individual attending. Contact Details - Direct phone number and email address for each person. Base Access Needs - Explicit statement on whether or not base access assistance is required for Tinker AFB so sponsorship can be coordinated. You must bring a Real ID-compliant driver's license or a valid U.S. Passport to be granted entry to the installation. Additional instructions to follow. ** YOU MUST RSVP TO THE EMAIL BY THE STATED TIME AND DATE TO BE ALLOWED ON THE SITE VISIT ** For questions or concerns, please contact the Contracting Officer at Tran.Tran.1@us.af.mil.
45%
Special Notice11/06/2026
Eight (8) each of NSN 4920-01-537-5649. This acquisition is restricted to qualified sources: BAE CAGE 12436
40%
Solicitation04/30/2026
Combined Request for Information and Synopsis - This notice is a combined Request for Information and Synopsis. The primary purposes of this notice are as follows: Conduct market research to determine if other sources capable of satisfying the agency’s requirements exist and if commercial items or non-developmental items are available that meet the agency’s requirements. Improve small business access to acquisition information. Enhance competition by identifying contracting and subcontracting opportunities. This announcement is not a Request for Proposal or an Invitation for Bid, nor is it to be construed as a commitment by the Government. The Government does not intend to contract based on this request or otherwise pay for any information solicited herein. Interested parties should contact Scottina Malia at 385-591-8407 or scottina.malia@us.af.mil. Detailed Information Noun: Fixture Assembly NSN: 4920-01-537-5649 P/N: 2215200-101 Estimated Quantity: Eight (8) each Destination: SW3210 Estimated Delivery Schedule: On or before 9/19/27 Set-aside: It is NOT expected that this requirement will be set-aside for small businesses Statements Authority: 10 U.S.C. 2304(c)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement contact the following firm(s): BAE CAGE 12436 Based upon market research, the Government is not planning on using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. One or more of the items under this acquisition is subject to Free Trade Agreements.
40%
Market Research03/28/2026
37%
Solicitation11/12/2026
1 EA of 4920-01-406-7356 3 EA of 6650-01-437-5214 2 EA of 5998-01-505-3909 19 EA of 6130-01-718-8723 3 EA of 5998-01-384-0844 4 EA of 5998-01-467-8585
37%
Solicitation03/23/2026

Additional Details

Solicitation Number

FA822424R0018

Archive Date

Sep 23, 2024

Office Address

HILL AFB, UT, 84056-5805