Notice ID: 916398d3547c47a98896973d1b43abbcSolicitation
Office Furniture Bldg. 2213
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM MST
- Posted
- October 22, 2026
- Notice type
- Solicitation
- Set-aside
- No Set aside used
- NAICS
- 337214: Office Furniture (except Wood) Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8228 AFSC OL H PZIM
- Place of performance
- Hill Air Force Base, Utah
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA8228-26-P-0001
- Notice ID
- 916398d3547c47a98896973d1b43abbc
Description
Purpose of requirement is to supply Bldg. 2213 with office furniture in support of the 309th MMXG.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 1Version 1SolicitationCurrent
Office Furniture Bldg. 2213
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Please see attached Salient Characteristics (Sources Sought) for full description of requirement. | - | Market Research | 11/02/2026 |
FN1625-26 LOUNGE SEATING NAICS 337214 CLOSING DATE FOR QUESTIONS 9/17/26 NEW PROPOSAL CLOSING DATE 10/12/26 AT 2:00 PM EST FULL AND OPEN | - | Combined Synopsis | 10/12/2026 |
The Government is only conducting market research and attaining information to identify contractors that are capable of providing the products and/or services listed below. The Government is currently utilizing PSC: 7110 – Office Furniture, and NAICS 337214 – Office Furniture (except Wood) Manufacturing. All information provided is STRICTLY VOLUNTARY. The purpose of this RFI is to query the market for potential interested, capable, responsible, and qualified small business offerors that can provide the stated requirement. The government is interested in collecting market data/information in accordance with Regulation FAR Overhaul (RFO) Part 10, from potential sources that have the capability to provide the Cubicle Installation, as identified below. Interested and/or potential small business offerors are requested and encouraged to submit responses to the questions below, not later than 10:00 A.M. Central Time on Tuesday, 03 October 2026.. All correspondence resulting from this RFI and relevant questions shall be sent to Darreus Hiers at darreus.hiers@us.af.mil and Joseph Gyakari at joseph.gyakari@us.af.mil. Please review and complete the needed documents that are attached for more additional information. | - | Market Research | 11/03/2026 |
Title: Sources Sought / RFI: T-38 Central Fuselage Station (CFS) 505 Drill Fixture Assemblies Notice Type: Sources Sought / Request for Information (RFI) Product Service Code (PSC): 3455 - Cutting Tools for Machine Tools (Alternative: 1560 - Airframe Structural Components) NAICS Code: 333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (Socio-economic Size Standard: 500 Employees) Location: 309th Aircraft Maintenance Group (AMXG) / 575th AMXS, Randolph AFB, TX 78150 1. Disclaimer & Important Notes This is a Request for Information (RFI) / Sources Sought notice only. This notice is issued solely for information, planning, and market research purposes in accordance with FAR 15.201(e). It does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or an invitation for bid. The Government does not intend to award a contract on the basis of this RFI or to otherwise pay for the information solicited. Respondents are advised that the U.S. Government will not be responsible for any costs incurred in preparing or submitting a response to this notice. All submissions will become Government property and will not be returned. Security & Technical Drawing Access Notice: To maintain operational security, no engineering drawings, CAD models, or technical data packages will be uploaded or publicly released during this initial market research phase. The technical sourcing parameters in Section 2 provide sufficient industrial detail for facilities to assess their capabilities. During the subsequent formal solicitation phase, the complete, certified Technical Data Package (TDP)—including all JCG230321 engineering drawings and 3D CAD SolidWorks/STEP/IGES models—will be fully provided under secure DLA Joint Certification Program (JCP) verification to all qualified bidders. 2. Technical Sourcing Profile The Department of the Air Force, 309th Aircraft Maintenance Group (AMXG), 575th AMXS, Randolph AFB, TX, is conducting market research to identify potential sources capable of manufacturing, fabricating, and delivering: Item Description: T-38 CFS 505 Drill Fixtures Kit (Precision drill fixture plate, custom-molded transport case, and corresponding accessories) Design Specification: Fabricated to Drawing Configuration JCG230321 Quantity: Five (5) Configuration Sets Required Lead Time: Three (3) Months / 90 Calendar Days from contract award (Critical Path) FOB Point: FOB Destination (851 4th St West Bldg 241, Randolph AFB, TX 78150) Salient Technical & Manufacturing Parameters: Envelope Dimensions: Approximately 14" Length x 10" Width x 6" Height (to be stored in a custom three-layer foam insert within a Pelican Model 1400 Protector Case). Material Requirements: High-strength tool steels (e.g., A2, D2, or pre-hardened 4140 alloys) requiring precision heat-treatment, stress-relieving, and black oxide or equivalent corrosion-resistant coating. Machining Operations: Substantive multi-axis CNC vertical milling, wire EDM (Electrical Discharge Machining), and precision surface grinding to hold dimensional tolerances down to $\pm$ 0.001 inches on critical interface bores. Packaging, Cushioning, and 3-Layer Kitting: The Pelican Model 1400 case must be configured with three (3) distinct, stacked, and nested layers of precision CNC-cut or water-jet cut, closed-cell polyethylene foam (no pick-and-pluck allowed): Layer 1 (Top Layer): Custom-cut pockets contoured for A and D Holes on the fuselage and boattail sides. Layer 2 (Middle Layer): Custom-cut pockets contoured for B Holes on the fuselage and boattail sides. Layer 3 (Bottom Layer): Custom-cut pockets contoured for C Holes on the fuselage and boattail sides. Each layer shall feature high-contrast lettering identifying components and center finger pulls/tabs for easy lifting. 3. Critical Sourcing & Quality Parameters Buy American & Specialty Metals: This requirement is subject to the Buy American statute (41 U.S.C. Chapter 83) as implemented by FAR Part 25 and DFARS Part 225. In accordance with DFARS 252.225-7009, any specialty metals (including tool steels) used to fabricate the drill fixtures must be melted or produced within the United States or a qualifying allied country. First Article Inspection (FAI): Unless the selected contractor is the original manufacturer or has previously fabricated this exact fixture for the USAF, a First Article Inspection in accordance with AS9102 and a certified CMM dimensional calibration sheet will be required prior to full-scale production. 4. Capability Statement Submission Requirements Interested and capable manufacturing firms are requested to submit a Capability Statement (not exceeding 4 pages) addressing the following: Company Profile: Company Name, Physical Address, CAGE Code, UEI, active Joint Certification Program (JCP) Number (DD Form 2345), and Small Business socio-economic status. Machining Competency: Describe your facility's in-house equipment (e.g., multi-axis CNC mills, wire EDM, surface grinders, and Coordinate Measuring Machines) and your experience holding tolerances of $\pm$ 0.001 inches on tool steel. Past Performance: Provide up to three (3) examples of similar high-tolerance aerospace assembly tooling, drill jigs, or flight-critical fixtures manufactured by your firm within the last 3 years. Lead Time Feasibility: Confirm whether your firm can source raw specialty steels, program tooling paths, fabricate, perform heat treatment, and deliver 5 completed assemblies within 90 calendar days of contract award. If 90 days is not feasible, provide your best realistic lead time. Rough Order of Magnitude (ROM): Provide a non-binding estimated cost range for fabricating 5 units of the drill fixture kit. If possible, please break down estimated machining labor hours versus raw material costs. Submission Email: joshua.akinwande.2@us.af.mil Submission Deadline: November 17, 2026, by 1500 MST Email Subject Line: RFI Response: T-38 CFS 505 Drill Fixtures - [Your Company Name] | - | Market Research | 11/17/2026 |
SOURCES SOUGHT NOTICE: This is not a solicitation but rather a Sources Sought to seek new qualified and responsible manufacturers to produce spare F-16 parts in support of the United States Air Force (USAF). This is not a Request for Proposal (RFP) and does not construe as a commitment by the Government. Subject: F-16 Transparencies, NSN: 1560-01-462-2040, NSN: 1560-01-462-4551, NSN: 1560-01-497-5078, NSN: 1560-01-497-5956, NSN: 1560-01-497-5959, NSN: 1560-01-497-6599 The USAF is seeking out additional manufacturing sources capable of producing F-16 transparencies and interested in becoming qualified to do so. Currently PPG Aerospace is the sole qualified manufacturing source. The Government owns the specifications. New sources interested in becoming qualified must meet the requirements in the MQR and EDL that are attached. The EDL and Engineering Instructions are the same for all 6 NSNs. The Government's objective is to expand the qualified industrial manufacturing base by identifying and qualifiing additional sources. Anticipated Acquistion Strategy for the Follow-on Contract: The Government anticipates a follow-on Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) contract with an anticipated award timeframe of September 2027. The effort is planned for a 5-year ordering period supporting both USAF and Foreign Military Sales (FMS) requirements. The Government anticipates a monthly demand of approximately 40 to 50 quantities over the course of this timeframe. The acquistion is anticipated to include on-ramping provisions to allow newly qualified Contractors to be added to the multiple-award vehicle post-award once qualification requirements are satisfied. Keep in mind, this is subject to change... See the attached attachments attached to this Sources Sought for additional information concerning this Sources Sought. Requests for technical data must be requested through the points of contact below. Requests must include a copy of your JCP printout or DD 2345. If the POC requesting access is not identified on the DD 2345 or the JCP printout, it will be rejected. The requestor must be identified on the DD 2345 in order to be granted access. All interested foreign parties shall let the Contracting Officers (CO) know that they are a foreign party so that the COs can clear them access to the drawings through the foreign disclosure office (FDO). | - | Market Research | 02/16/2027 |
Additional Details
Solicitation Number
FA8228-26-P-0001
Archive Date
Nov 21, 2026
Office Address
HILL AFB, UT, 84056-5805