REPAIR OF F-16 IO Card
Archived on February 3, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:55 PM MST
- Posted
- December 17, 2025
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- 811210: Electronic and Precision Equipment Repair and Maintenance
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8251 AFSC PZABB
- Place of performance
- Exton, Pennsylvania, 19341
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA8251-26-DFLCC
- Notice ID
- 667afce5a7e44b368c3fd2abb9ef0dfd
Description
1. NOTICE: This is not a solicitation but rather a SSS to determine potential sources for information and planning purposes only.
1.1 The purpose of this SSS is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Size standard of $34M. The Government will use this information to determine the best acquisition strategy for this repair. The Government is interested in all small businesses to include 8(a), Service-Disabled Veteran Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Please provide a brief description of how the limitations listed in section 2.b below will be overcome in order to meet the Government’s requirement listed in section 2.a below. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.
2. Program Details:
a. REQUIREMENTS
- The I/O Discrete Fail Logic Card (Part Number 7001644-49) is a subassembly of the Digital Flight Controller within the F-16 Block 40/42/50/52 Flight Controls System. The I/O Logic Card performs amplifier commands for the Integrated Servo Actuator amplifier and provides an interface for discrete signal processing, upon input from the pilot.
- The repaired I/O Discrete Fail Logic Card must be in full compliance and assembled in accordance with OEM specifications and drawings. The required specifications and drawings are proprietary to the OEM and will not be provided.
- Potential sources shall be capable of furnishing all labor, materials, facilities (owned or operated by the contractor) and equipment required to accomplish the repair of the item listed below. Generally, the work to be accomplished includes disassembly (completely or substantially into individual component parts), machining, cleaning, inspection, assembly, testing, preservation, and packaging to return an unserviceable “F-Condition” asset to a like-new “A-Condition” asset. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources, material shortage issues, and shipping serviceable assets.
- Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source.
b. LIMITATIONS. The Government does not have drawings below the product specification from the Original Equipment Manufacturer (OEM). The Government has no other engineering data and/or data rights related to this synopsis. No data other than the product specification can be provided to interested companies.
In addition the Government does not have sufficient data/rights to be able to independently evaluate and qualify potential repair sources to maintain the I/O Logic Card Operational Safety, Suitability, and Effectiveness (OSS&E). Prior to requesting Government qualification, companies interested in becoming a qualified Government repair source should first obtain the I/O Logic Card Original Equipment Manufacturer (OEM), Honeywell International (CAGE 59364), authorization/certification to accomplish repairs. If OEM authorization is not received, the company seeking Government source approval will need to clearly identify how the company will overcome the lack of Government data/rights and maintain the I/O Logic Card OSS&E in order to potentially allow Government qualification independent of the OEM authorization/certification.
c. REQUEST FOR INFORMATION. Interested parties are requested to submit the following information to assist the Government in developing the repair strategy. Please submit this information to the contracting officer via email as soon as possible but not later than 19 January, 2026:
1. Basic Company Information:
Company Representative
Address
Telephone
Email Address
DUNS Number
CAGE Code and/or Tax ID Number
Socioeconomic Status (Large, Small, Small Disadvantaged, etc.)
2. White Paper. Please provide a brief White Paper describing the company capabilities for the following (to utilize the services of sub-tier vendors or subcontractors, please include similar information for those vendors or subcontractors too)
- Repairing, testing, trouble shooting, component part support, and manufacturing of the I/O Discrete Fail Logic Card.
- Past production experience, supplying I/O Discrete Fail Logic Card parts, testing knowledge and capabilities, description of facilities, personnel, related manufacturing experience, and existing safety approvals.
- If an interested party anticipates a teaming arrangement, please describe the teaming arrangement.
- Please provide a description of similar services offered to the Government and to commercial customers within the last three years.
- Please provide documentation identifying repair authorization/certification from the I/O Discrete Fail logic Card OEM or how the lack of Government data/rights will be overcome such that the Government could accomplish independent source qualification.
Important Considerations:
This is not a request for proposal (RFP) or an invitation for bid, nor is it to be construed as a commitment by the Government. The Government does not intend to make an award on the basis of this sources sought synopsis for information or otherwise pay for the information solicited herein. Copies of the submitted information will be reproduced and review may be used to develop a request for proposal. Only non-classified information shall be provided in your response, and your response should be reviewed to assure that there are not any operational sensitivities identified.
Contract performance may also involve data that is subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center, and have an approved DD Form 2345, will be provided copies of any related solicitation (including DRAFT RFP) or other data subject to foreign disclosure restrictions.
The information in this notice is based on current information as of the publication date. The information in this notice is subject to change and is not binding to the Government. If changes are made, updated information will be provided in future notices and will be posted on www.sam.gov. Responses to this SSS may or may not be returned. Contractors not responding to this SSS will not be precluded from participation in any future solicitation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
REPAIR OF F-16 IO Card
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The U.S. Air Force requires a one-time, performance-based contract to repair the F-16 Input Output (I/O) Circuit Card (P/N 7001644-49). This card is a subassembly of the Digital Flight Controller within the F-16 Block 40/42/50/52 Flight Control System. It processes pilot inputs to send commands to the Integrated Servo Actuator amplifier and provides an interface for discrete signal processing. The contractor must provide all necessary expertise, labor, tools, and parts to repair the I/O card to a serviceable A condition within the timeframe specified in the contract. The contractor shall also maintain comprehensive test, repair, and cost accounting records for all serviced items. Requirement is restricted to qualified source(s). This is a sole source contract to Innovative Aerosystems Inc. CAGE Code 0EUW0. | 88% | Solicitation | 05/16/2026 |
Sole source award to BAE for F-16 Transducer repair. | 88% | Awarded | Open |
Repair of the F16 A/B/C/D Flight Control Stick Force Transducer | 88% | Solicitation | 03/23/2026 |
This is a notice of intent to award a sole-source contract. However, any firm that believes it can satisfy this requirement may submit a capability statement, proposal, or quotation, which shall be considered by the agency.This effort is for: REPAIR of the USAF F16 C/D CPDG/eCPDG. This repair consists of major overhaul including complete or substantial tear-down into component parts. This tear-down includes reworking or replacing most parts in the SRU assemblies. Reusable disassembled item components shall be used as replacement components for restoring functionality of other items. These reusable components are not required to maintain the end item identification. The SRU item parts shall be reassembled so as to furnish a totally rebuilt item. The repair processes used by the contractor shall bring service life back to the reconditioned items. The SRU(s) will be restored to a serviceable condition in a facility owned and/or operated by the contractor.NSN1280-01-508-5723. Amendment FA825126R0018 0001 reopens the solicitation and extends the proposal dealine to 14 August 2026. | 84% | Combined Synopsis | 08/14/2026 |
1. NOTICE: This is not a solicitation but rather a Sources Sought to determine potential sources for information and planning purposes only.1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Size standard of $34M. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small business to include Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.1.2 This sources sought synopsis does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed.2. Program Details:The Air Force is issuing this repair sources sought announcement as part of a market research survey to determine if additional sources exist that could become qualified for repair and restoration of the F-16 Radar Multiplier Assembly. The contractor would be required to repair and restore the F-16 Radar Multiplier Assembly to a serviceable condition, but not like new cosmetically. Responses to this Notice shall consist of an initial white paper (not to exceed 3 pages) describing the offeror?s capabilities with regard to trouble shooting, testing and repairing the F-16 items. The specific parts involved are as follows: FSC: 6625NIIN: 01-124-0226MMAC: WFPart #: 12604334-1NSN#: 6625-01-124-0226 Interested organizations who feel they possess the necessary capabilities should respond by providing the Government the following information: a point of contact, address, telephone, and fax numbers, email address, UEI number, CAGE code, and/or tax ID number, as well as size category, (large, small, small disadvantaged, etc.), a brief summary of the company?s capabilities, description of facilities, personnel, related manufacturing experience, and existing safety approvals (refer to the white paper listed above).Provide any supporting information such as commercial literature, catalogues, manuals, etc. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must meet the criteria specified herein as well. Responses to this Notice are due on or before 04-17-2026. All information marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities.NOTE: Source Approval Request (SAR) packages are not the same as a Sources Sought Response. For instructions on how to become a qualified approved source contact the listed Source Development Specialist. Offerors must possess access to all appropriate data. Data verification information can be found in the RQR and RDL report for the items listed above. Technical Data Package and Drawing requests are to be made to The Public Sales Office at Tech Order Manuals: AFLCMC.LZP.PUBSALES@us.af.mil Engineering Data/Drawings: AFLCMC.LZP.TINKERPUBLICSALES@us.af.milFor instructions on how to become a qualified approved source, see the RQR and RDL attached to this posting. Please e-mail all SAR packages to the following:Tracey Beringer, Source Development Specialist, tracey.beringer@us.af.milVeronika Pett, veronika.pett@us.af.milDarin Rector, darin.rector@us.af.milThe announcement on Sam.gov is just for responses to the sources sought notice and is not a deadline for SAR submission. You may submit a SAR at any time. | 81% | Market Research | 04/18/2026 |
Additional Details
Solicitation Number
FA8251-26-DFLCC
Archive Date
Feb 3, 2026
Office Address
HILL AFB, UT, 84056-5825