Notice ID: ebb02df84e334024a970f5063b4e0f6dAward NoticeAwarded
F-16 Transducer Repair
Awarded on September 23, 2026. Full description on SAM.gov.
Awarded tounder FA825126DB004 (source: SAM.gov award notice)• $7.9M
Overview
- Posted
- September 29, 2026
- Notice type
- Award Notice
- Set-aside
- No Set aside used
- NAICS
- 811210: Electronic and Precision Equipment Repair and Maintenance
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8251 AFSC PZABB
- Place of performance
- Endicott, New York, 13760
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Sep 23, 2026
- Award amount (SAM.gov award notice)
- $7.9M
Identifiers
- Solicitation number
- FA825126R0007
- Notice ID
- ebb02df84e334024a970f5063b4e0f6d
- Award number (PIID)
- FA825126DB004
Description
Sole source award to BAE for F-16 Transducer repair.
Award Overview
Award Number
FA825126DB004
Award Amount (SAM.gov award notice)
$7.9M
Award Date
Sep 23, 2026
Awardee
Awardee UEI
HC3ZN7CJFGT1
Awardee CAGE Code
89954
Awardee Address
Endicott, NY 13760, UNITED STATES
Line Item Number
0001-4003
Original Solicitation
Notice ID: ebb02df84e334024a970f5063b4e0f6d
Posted Date: Sep 29, 2026
Original Response Deadline: Not specified
Contract Details
Contract data not yet available
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Contacts
Contracting Officer
Primary Contact
Christian Barwick
Documents
Links (4)
- PIEE Solicitation Module Link for FA825126R0007piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1
- 2Version 2Award NoticeCurrent
Type changed from Solicitation to Award Notice
F-16 Transducer Repair
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Repair of the F16 A/B/C/D Flight Control Stick Force Transducer | 94% | Solicitation | 03/23/2026 |
This is a notice of intent to award a sole-source contract. However, any firm that believes it can satisfy this requirement may submit a capability statement, proposal, or quotation, which shall be considered by the agency.This effort is for: REPAIR of the USAF F16 C/D CPDG/eCPDG. This repair consists of major overhaul including complete or substantial tear-down into component parts. This tear-down includes reworking or replacing most parts in the SRU assemblies. Reusable disassembled item components shall be used as replacement components for restoring functionality of other items. These reusable components are not required to maintain the end item identification. The SRU item parts shall be reassembled so as to furnish a totally rebuilt item. The repair processes used by the contractor shall bring service life back to the reconditioned items. The SRU(s) will be restored to a serviceable condition in a facility owned and/or operated by the contractor.NSN1280-01-508-5723. Amendment FA825126R0018 0001 reopens the solicitation and extends the proposal dealine to 14 August 2026. | 84% | Combined Synopsis | 08/14/2026 |
1. NOTICE: This is not a solicitation but rather a Sources Sought to determine potential sources for information and planning purposes only.1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Size standard of $34M. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small business to include Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.1.2 This sources sought synopsis does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed.2. Program Details:The Air Force is issuing this repair sources sought announcement as part of a market research survey to determine if additional sources exist that could become qualified for repair and restoration of the F-16 Radar Multiplier Assembly. The contractor would be required to repair and restore the F-16 Radar Multiplier Assembly to a serviceable condition, but not like new cosmetically. Responses to this Notice shall consist of an initial white paper (not to exceed 3 pages) describing the offeror?s capabilities with regard to trouble shooting, testing and repairing the F-16 items. The specific parts involved are as follows: FSC: 6625NIIN: 01-124-0226MMAC: WFPart #: 12604334-1NSN#: 6625-01-124-0226 Interested organizations who feel they possess the necessary capabilities should respond by providing the Government the following information: a point of contact, address, telephone, and fax numbers, email address, UEI number, CAGE code, and/or tax ID number, as well as size category, (large, small, small disadvantaged, etc.), a brief summary of the company?s capabilities, description of facilities, personnel, related manufacturing experience, and existing safety approvals (refer to the white paper listed above).Provide any supporting information such as commercial literature, catalogues, manuals, etc. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must meet the criteria specified herein as well. Responses to this Notice are due on or before 04-17-2026. All information marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities.NOTE: Source Approval Request (SAR) packages are not the same as a Sources Sought Response. For instructions on how to become a qualified approved source contact the listed Source Development Specialist. Offerors must possess access to all appropriate data. Data verification information can be found in the RQR and RDL report for the items listed above. Technical Data Package and Drawing requests are to be made to The Public Sales Office at Tech Order Manuals: AFLCMC.LZP.PUBSALES@us.af.mil Engineering Data/Drawings: AFLCMC.LZP.TINKERPUBLICSALES@us.af.milFor instructions on how to become a qualified approved source, see the RQR and RDL attached to this posting. Please e-mail all SAR packages to the following:Tracey Beringer, Source Development Specialist, tracey.beringer@us.af.milVeronika Pett, veronika.pett@us.af.milDarin Rector, darin.rector@us.af.milThe announcement on Sam.gov is just for responses to the sources sought notice and is not a deadline for SAR submission. You may submit a SAR at any time. | 81% | Market Research | 04/18/2026 |
C-5 COMPUTER, DIGITAL NAICS: 811210 The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to purchase the COMPUTER, DIGITAL. The National Stock Numbers (NSN) and Part Numbers (PN) are as follows: Item: Computer, Digital NSN: 7021015615734UC PN: 714180-67 Item: Computer, Digital NSN: 7021017028465UC PN: 714180-7100 The Computer, Digital provides operator interface with the C-5 aircraft on-board embedded diagnostics system. The Digital, Computer is used for in-flight situational awareness of subsystem health and reports BIT codes while attached to a swivel base mounted on the C-5 navigator's table. The current sustainment life cycle for these items is 2050. The service shall include providing obsolete parts resolution along with the necessary engineering to investigate Deficiency Reports and Material Improvement Projects (MIPs). The COMPUTER, DIGITAL must meet form, fit, function, and interface requirements as referenced in per T.O. 5A13-5-29-3 and 5A13-5-30-3. However, the Government does not own the data or the rights to the data needed to compete the repair of this part. It has been determined to be uneconomical to reverse engineer the data, qualify a new source, or buy the data and/or data rights. MILTOPE CORPORATION is the only source of known repair for this system and has been since it was fielded. The COMPUTER, DIGITAL are currently repaired by MILTOPE CORPORATION under contract FA8538-23-D-0010. The RMC/RMSC code for the COMPUTER, DIGITAL, is R3/R. This service has been performed multiple times by MILTOPE CORPORATION, which is the original manufacturer of the COMPUTER, DIGITAL. Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. MILTOPE CORPORATION is the manufacturer of the COMPUTER, DIGITAL and the known sole source contractor for repair of this item. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey. RFO 15.101(c)(3), applies to this request for information: The Government does not intend to award a contract on the basis of the RFI or otherwise pay for the information requested; and Responses will be treated as information only and not as a proposal. INSTRUCTIONS: The document(s) below contains a description of the COMPUTER, DIGITAL repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Identify any areas of work that your organization believes should be broken out exclusively for Small Business. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Questions relative to this market survey should be addressed to Erika Bell, Program Manager, 730-326-2103 or via email at erika.bell.2@us.af.mil. | 79% | Market Research | 11/20/2026 |
C-5 COMPUTER, DIGITAL NAICS: 811210 The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to purchase the COMPUTER, DIGITAL. The National Stock Numbers (NSN) and Part Numbers (PN) are as follows: Item: Computer, Digital NSN: 7021015615734UC PN: 714180-67 Item: Computer, Digital NSN: 7021017028465UC PN: 714180-7100 The Computer, Digital provides operator interface with the C-5 aircraft on-board embedded diagnostics system. The Digital, Computer is used for in-flight situational awareness of subsystem health and reports BIT codes while attached to a swivel base mounted on the C-5 navigator's table. The current sustainment life cycle for these items is 2050. The service shall include providing obsolete parts resolution along with the necessary engineering to investigate Deficiency Reports and Material Improvement Projects (MIPs). The COMPUTER, DIGITAL must meet form, fit, function, and interface requirements as referenced in per T.O. 5A13-5-29-3 and 5A13-5-30-3. However, the Government does not own the data or the rights to the data needed to compete the repair of this part. It has been determined to be uneconomical to reverse engineer the data, qualify a new source, or buy the data and/or data rights. MILTOPE CORPORATION is the only source of known repair for this system and has been since it was fielded. The COMPUTER, DIGITAL are currently repaired by MILTOPE CORPORATION under contract FA8538-23-D-0010. The RMC/RMSC code for the COMPUTER, DIGITAL, is R3/R. This service has been performed multiple times by MILTOPE CORPORATION, which is the original manufacturer of the COMPUTER, DIGITAL. Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. MILTOPE CORPORATION is the manufacturer of the COMPUTER, DIGITAL and the known sole source contractor for repair of this item. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey. RFO 15.101(c)(3), applies to this request for information: The Government does not intend to award a contract on the basis of the RFI or otherwise pay for the information requested; and Responses will be treated as information only and not as a proposal. INSTRUCTIONS: The document(s) below contains a description of the COMPUTER, DIGITAL repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Identify any areas of work that your organization believes should be broken out exclusively for Small Business. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Questions relative to this market survey should be addressed to Erika Bell, Program Manager, 730-326-2103 or via email at erika.bell.2@us.af.mil. | 79% | Special Notice | 11/20/2026 |
Additional Details
Solicitation Number
FA825126R0007
Archive Date
Dec 25, 2026
Office Address
HILL AFB, UT, 84056-5825