Complete Layer 1 switching fabric
Archived on February 7, 2026. Original response deadline: . Full description on SAM.gov.
Description
REQUEST FOR INFORMATION (RFI)
1. This Request for Information (RFI) is issued in accordance with the Federal Acquisition Regulation (FAR) clause 52.215-3 (Request for Information or Solicitation for Planning Purposes - Oct 1997) and is published to obtain information for use by the Air Force Lifecycle Management Center (AFLCMC), Cryptologic and Cyber Systems Division (CCSD), Joint Base San Antonio - Lackland, Texas, for market research and planning purposes only.
2. THIS RFI IS NOT A REQUEST FOR PROPOSAL, INVITATION FOR BID, OR AN ANNOUNCEMENT OF A SOLICITATION; IT IS ONLY INTENDED FOR INFORMATION OR PLANNING PURPOSES. There is no bid package or solicitation document associated with this announcement. Response to this RFI is strictly voluntary and will not affect any potential offeror’s ability to submit an offer if a solicitation is released. Any requests for a solicitation package will be disregarded. The government does not intend to award a contract on the basis of this RFI or otherwise pay for the information solicited. No entitlement to payment of direct or indirect costs or charges by the government will arise as a result of preparing submissions in response to this RFI and the government's use of such information. Submittals will not be returned to the sender. Respondents to this RFI may be asked to provide additional information/details based on their initial submittals.
3. This RFI is being conducted to determine if there are contractors capable of fulfilling the following requirement.
The ITAC requires the procurement of a new Layer 1 physical switching fabric to replace an existing End-of-Life (EOL) Apcon switch. The new switch is critical to support the ITAC Test Bed Labs for the National Security Agency (NSA) joint testing and to provide technical support to Air Force customers utilizing High Assurance Internet Protocol Encryptor (HAIPE), Collaborative Advanced Secure Test Network (CASTNET), and Ethernet Data Encryptor (EDE) devices.
Based on initial research, the Government believes that only a single solution can meet the unique combination of high-density, multi-generational port speeds, ultra-low deterministic latency, and proprietary automation software required. This RFI is intended to survey the market to validate whether other sources exist that can meet all of the Government's specialized requirements listed below:
- Chassis and Port Density: A modular Layer 1 chassis that supports a minimum of (320) 100M/1G/2.5G/5G/10G ports and (64) 40G/100G ports in a single managed fabric.
- Deterministic Latency: The switching fabric must provide sub-5-nanosecond (<5ns) deterministic latency across all ports and connections to prevent the introduction of packet jitter into cryptographic testing.
- Automation Software: The solution must include proprietary automation software (i.e Velocity TestStream) capable of a ‘Snap-N-Restore’ or ‘snapshot’ capability, allowing for the digital recording and restoration of complex physical layer testbed topologies in seconds.
- Secure Facility Compliance: The product must be certified for placement in a Secret facility. All wireless capabilities (e.g., Wi-Fi, Bluetooth) must be disabled or physically removed by the vendor prior to shipment.
- Maintenance: On-site maintenance is not required; the industry standard practice of "Return to Factory" or "Advanced Hardware Replacement" is sufficient for this lab environment.
4. Anticipated Period of Performance: 12-Month base period for hardware, software and standard commercial warranty.
5. All vendors are requested to respond to the requirement by submitting a capability statement (no more than 2 pages) that includes the following items.
- Company name
- Commercial and Government Entity (CAGE) Codes as registered in SAM.gov.
- Points of contact including address, e-mail address, telephone, and fax numbers
- Lead time for the hardware
- Provide a high-level ROM /budgetary estimate
6. As indicated above, this is market research. Your responses will be used for planning purposes. Please address any comments and/or questions you may have regarding this RFI in writing by e-mail directly to the Contracting Officer, Ms. Lolita Soto, Email: lolita.soto@us.af.mil, and Mr. Richard Villarreal, Email: richard.villarrreal.1@us.af.mil. Response due date: 6 February 2026, 4:00 PM CST. Please annotate the subject line of e-mail responses as: “Layer 1 Switch, RFI Response.” Responses may be emailed to the addresses listed above.
Overview
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
FA8307FY26- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentJan 30, 2026
Complete Layer 1 switching fabric
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
This was a single source requirement awarded to General Dynamics Mission Systems, Inc. (GDMS). A notice of intent to sole source to GDMS was published on 05 August 2025; no interested parties responded to the notice or expressed any interest or capability to fulfill this requirement. The contractor (GDMS) has exclusive proprietary data as the Original Equipment Manufacturer (OEM) that makes them as the only source capable of fulfilling the requirement. Being the original RRK designer and producer, GDMS is the only awardee capable of properly constructing and programming these cables at the level of functionality and precision assembly required; other sources would only be able to construct the cables but not program them. The resulting award was a Firm Fixed Price purchase order. | Awarded | 334290 | No Set-Aside | 09/26/2025 | Open | San Antonio, TX | |
The Department of the Air Force, Air Force Materiel Command (AFMC), Air Force Test Center (AFTC), AFTC/PZZF, Edwards AFB, CA, hereby issues this Combined Synopsis/Solicitation and Notice of Intent to award a sole-source, Firm-Fixed-Price (FFP) purchase order. This transaction is conducted pursuant to RFO 6.103-1, "Only one responsible source and no other supplies or services will satisfy agency requirements," as implemented by RFO FC 12.201-1, "Simplified procedures." The Government intends to award a sole-source contract exclusively to ACG Systems, Inc. (CAGE: 1FRK9; COTS Vendor/Small Business), located at 133 Defense Highway, Annapolis, MD 21401-7023. 2. REQUIREMENT DESCRIPTION: The Contracting Officer has determined that only the following original equipment manufacturer (OEM) part numbers can satisfy the agency’s critical technical requirements: - Line Item 01: [P/N: 01-P58564R002] URC-300 VHF/UHF Transceiver Assembly, COTS, O&M Manual (Qty: 1 EA) - Line Item 02: [P/N: US00240100-001] Universal Mounting Bracket System for URC-300 (Qty: 1 EA) - Line Item 03: [P/N: 30-P58549R001] DC Power Cable (Qty: 1 EA) - Line Item 04: [P/N: 85-P39217N001-C3] VHF/UHF Spring Loaded Mobile Antenna (Qty: 1 EA) - Line Item 05: [P/N: US00300049-001] Antenna Mounting Bracket, Roof Mount with Integrated Cable (Qty: 1 EA) - Line Item 06: [P/N: 50-P53272R001-C3] Speaker Microphone (Qty: 1 EA) - Line Item 07: [P/N: 01-P57870R001] Remote Control Unit (RCU) enabling CM-350 V2 dual transceiver control (Qty: 1 EA) - Line Item 08: [P/N: 60837-001] Palm Microphone for CM-300/350 (V2) Transmitter (Qty: 1 EA) - Line Item 09: [P/N: SH-40] Receiver/Transmitter Compatibility Connector (Qty: 1 EA) - Line Item 10: [P/N: 30-P58653R050] URC-300 to RCU Audio Interface Cable, 50 ft (Qty: 1 EA) - Line Item 11: [P/N: 15-P58596R002] URC-300 Battery Connector Cover (Qty: 1 EA) 3. DETERMINATION AND JUSTIFICATION: ACG Systems, Inc. is the Original Equipment Manufacturer (OEM) and maintains a strict direct-sales model with zero authorized third-party distributors or resellers for Air Force acquisitions. The required hardware represents an expansion of the existing URC-300 baseline telemetry suite integrated under previous contract FA9302-22-F-G596. This equipment is technically required to natively interface with the B-52 CERP Mobile Telemetry Van's proprietary CM-350 V2 control protocols and must satisfy mandatory military TEMPEST/EMI shielding requirements. Procurement of alternative commercial hardware is legally and economically restricted. Sourcing non-ACG hardware would render the existing subsystem entirely inoperable, resulting in a direct, severe duplication of hardware and integration labor costs. Furthermore, introducing an uncertified brand would trigger a mandatory, comprehensive TEMPEST recertification of the Mobile Telemetry Van and introduce a critical 6-to-9-month laboratory testing delay. This delay would halt telemetry flight-test support, directly threatening overall B-52 engine replacement timelines and Chief of Staff of the Air Force (CSAF) operational readiness targets. In accordance with RFO policies, this requirement cannot be satisfied through any mandatory source, including AbilityOne or UNICOR. 4. RESPONSE INSTRUCTIONS AND POINT OF CONTACT: This notice of intent does not constitute a competitive Request for Quotes (RFQ) or Request for Proposals (RFP). However, in accordance with RFO FC 12.202, any responsible source that believes it can satisfy the aforementioned requirements may submit a formal capability statement. To be considered, any prospective challenger must submit written, legally binding documentation demonstrating: A) Direct, unmodified technical compatibility with the proprietary CM-350 V2 Remote Control Unit protocols. B) Current military TEMPEST and EMI certification data for integration into 419FLTS classified shelters. C) Explicit, written authorization from the OEM (ACG Systems, Inc.) verifying reseller or distributor status. All capability statements must be submitted via email to Contract Specialist/Contracting Officer Josiah Broadway at josiah.broadway@us.af.mil no later than September 3, 2026, at 12:00 PM Pacific Standard Time (PST). A determination by the Government not to compete this proposed action based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement in the future. | Combined Synopsis | 334220 | No Set-Aside | 08/31/2026 | 09/03/2028 | 0, TX | |
Notice of intent Healthcare Contracting Division – San Antonio, in support of Wilford Hall Medical Center intends to award a sole source contract to Premier Shockwave. for The OssaTron a medical device that delivers high-energy extracorporeal shock wave therapy (ESWT)—acoustic shock waves applied from outside the body. OssaTron is used for certain chronic orthopedic conditions that did not improve with conservative treatment, including: Chronic plantar fasciitis (persistent heel pain) Chronic lateral epicondylitis (“tennis elbow”). The service being requested is for a five-year period. The NAICS code 334510 Electromedical and Electrotherapeutic Apparatus, Manufacturing size standard is 1,250 employees. This notice is neither a request for quotes nor a solicitation of offers; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency for future requirements. | Market Research | 334510 | No Set-Aside | 10/14/2026 | 10/28/2026 | 0, TX | |
NASA Johnson Space Center (JSC) White Sands Test Facility (WSTF) has a requirement to procure one Signal Conditioning System in support of the Propulsion Test Office. NASA JSC WSTF intends to issue a sole source contract to procure a 192-channel signal conditioning system for WSTF’s Test Stand 406 from Precision Filters, Inc. under the authority of FAR 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. Precision Filters, Inc. is the only responsible source capable of fulfilling this requirement, as its proprietary hardware is required to maintain continuity, reduce maintenance costs, minimize critical spares, leverage existing training procedures and maintain personnel certifications. Furthermore, Precision Filters proprietary “go-no go” system calibration, FLAT, PULSE, and Balanced Constant Current (BCC) technology are required to meet NASA/WSTF’s DAC signal conditioning performance requirements The Government intends to acquire a commercial product or service using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to Larissa Cunha, at Larissa.m.cunha@nasa.gov and Cynthia Uribe, cynthia.uribe@nasa.gov, not later than 4 pm Mountain Daylight Time on October 21, 2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether to conduct this acquisition on a competitive basis. A decision by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at: https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf | Special Notice | 334515 | No Set-Aside | 10/06/2026 | 10/21/2026 | Las Cruces, NM | |
Request for Dosimetry Badege Service | Market Research | 334513 | No Set-Aside | 10/06/2026 | 10/19/2026 | Houston, TX |
Additional Details
Solicitation Number
FA8307FY26
Archive Date
Feb 7, 2026
Office Address
SAN ANTONIO, TX, 78243-7007