GovChime
Notice ID: ba2dca0710e749539a3b5f78cedd9350Sources SoughtArchived

Repairs to APX-119 Identification of Friend or Foe (IFF) Systems and ALE-50 Launcher Controller

Archived on January 5, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
December 19, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8539 AFSC PZABA
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA8539-26-RFI-APX-119
Notice ID
ba2dca0710e749539a3b5f78cedd9350

Description

The amended Request for Information (RFI) as well as the amended draft PWS attached hereto to this notice contain a description of the APX-119 Identification of Friend or Foe (IFF) Systems and ALE-50 Launcher Controller repair requirements. The RFI contains a Contractor Capability Survey. The Survey allows contractors to provide their company’s capability as it pertains to the repair requirements described under this notice.

If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.)
a. Identify any areas of work that your organization believes should be broken out exclusively for Small Business.

Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged.

Questions relative to this market survey should be addressed by email to Zachary Bressler, Logistic Management Specialist, zachary.bressler@us.af.mil and Andrew Adams, Logistic Management Specialist Lead, andrew.adams.13@us.af.mil.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (3)

  • APX-119 and ALE-50_ Amended Draft PWS.docx

    118 KBAdded in Sources Sought version 6Posted
    Download
  • APX-119 and ALE-50 One Time Effort RFI_Final.pdf

    166 KBAdded in Sources Sought version 6Posted
    Download
  • APX-119 One Time Effort RFI_Final.pdf

    173 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchived

    Repairs to APX-119 Identification of Friend or Foe (IFF) Systems

    Notice 245c2b9263e84f5b8b2840553da70dad on SAM.gov

  2. 4
    Version 4Sources SoughtArchived

    Repairs to APX-119 Identification of Friend or Foe (IFF) Systems

    Notice 33f3bcc02bd0486db75f1fdbcddd62af on SAM.gov

  3. 6
    Version 6Sources SoughtArchivedCurrent

    Repairs to APX-119 Identification of Friend or Foe (IFF) Systems and ALE-50 Launcher Controller

    Notice ba2dca0710e749539a3b5f78cedd9350 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment I: 29 September 2026 Solicitation: FA853826R0017/ Flat Panel Up Front Control (FPUFC) Repair 1. To attach updated Solicitation, that includes latest version of the PWS with internal audit required language in Para 4.5.1 2. To Provide an additional POC: Anthony Cheatham Email: anthony.cheatham.1@us.af.mil All other information remains the same. ********************************************************************************** This effort is in support of evaluation, fault isolation, inspection, testing, repair, and packaging of the Flat Panel Up Front Controller NSN 5895-01-530-1899FX, PN A05A0249-12. The FPUFC is applicable to the F-15E. This repair effort will utilize a Firm-Fixed Pricing (FFP) 5 year repair contract with 5 one-year ordering periods plus a 6 month optional order period. Repair FPUFC, NSN 5895-01-530-1899FX, P/N A05A0249-12: Ordering Period BEQ Basic 100 Ordering Period I 100 Ordering Period II 100 Ordering Period III 100 Ordering Period IV 100 6 Month Extension 50 Total Estimated Repair Value: $ Parts & Materials: Ordering Period BEQ Basic 500 Ordering Period I 0 Ordering Period II 0 Ordering Period III 0 Ordering Period IV 0 6 Month Extension 0 Total Estimated Parts & Labor Value: $ BER: Ordering Period BEQ Basic 1 Ordering Period I 1 Ordering Period II 1 Ordering Period III 1 Ordering Period IV 1 6 Month Extension 1 Total Estimated BER Value: $ NFF: Ordering Period BEQ Basic 1 Ordering Period I 1 Ordering Period II 1 Ordering Period III 1 Ordering Period IV 1 6 Month Extension 1 Total Estimated NFF Value: $ Total Estimated Contract Value: $
55%
Solicitation11/25/2026
Title: Pre-solicitation - Repair of the F-15 Digital Mapping System (DMS) Advanced Display Core Processor (ADCP) NAICS: 811210 PSC/FSC: J016 Notice ID: FA8538-27-R-B004 Synopsis for this requirement is being issued by AFSC/PZAAB (FA8538). The 409th Supply Chain Management Squadron (SCMS) / GUMA anticipates a five-year, Firm Fixed Price (FFP) Indefinite Delivery Contract (IDC) for the repair of the F-15 Advanced Display Core Processor (ADCP), NSN: 1270-01-562-6566FX, PN: 8525470-951 and Digital Map Processor (DMP), NSN: 5895-01-444-5142FX, PN: 8520305-911 to provide all the necessary parts and labor to test and repair the ADCP/DMP. This will include providing obsolete parts resolution along with the necessary engineering support to investigate Deficiency Reports and Material Improvement Projects (MIPS), and sanitization of classified data from reparable units. The repair of the ADCP/ DMP is performed as a Direct Sales Partnership Agreement (DSPA) with the Government (WR-ALC/EMXG), supporting requirements generated for the Air Force Sustainment Center (AFSC), 638th Supply Chain Management Group (SCMG), 409th Supply Chain Management Squadron (SCMS)/GUMCA. The anticipated IDC will include one (1) 12-month basic year and four (4) one-year ordering periods. The proposed contract action is for services for which the Government intends to solicit and negotiate using Other Than Full and Open Competition (OTF&OC) procedures in accordance with RFO Part 6.103-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. The Government does not own any production level technical data or specialized test equipment in support of this requirement. As a result, Honeywell International Inc. (CAGE 07187), is the only known source with adequate knowledge of the F-15 Digital Mapping System (DMS) Advanced Display Core Processor (ADCP) performance requirements and possession of the required technical data and capabilities needed to repair this item and ensure compatibility of the equipment. The Government's required delivery schedule is 21 days after receipt of asset. The quantities shown below represent the Best Estimated Quantities for this effort. NSN: 1270-01-562-6566FX Part Number: 8525470-951 Noun: Advanced Display Core Processor (ADCP) RMC/ RMSC: R3/R Sanitization Quantity: 50 EA Repair Quantity: 100 EA Surge Option Repair Quantity: 20 EA NSN: 5895-01-444-5142FX Part Number: 8520305-911 Noun: Digital Map Processor (DMP) RMC/ RMSC: R3/R Repair Quantity: 400 EA Surge Option Repair Quantity: 80 EA NSN: 7045-01-445-0383FX Part Number: 8520380-903 Noun: Mission Cartridge (MC) RMC/ RMSC: R3/R Sanitization Quantity: 100 EA Repair Quantity: 150 EA Surge Option Repair Quantity: 30 EA NSN: 7045-01-444-6971FX Part Number: 8520390-903 Noun: Theatre Cartridge (TC) RMC/ RMSC: R3/R Repair Quantity: 50 EA Surge Option Repair Quantity: 10 EA NSN: 7045-01-500-5493FX Part Number: 8520390-904 Noun: Theatre Cartridge (TC) RMC/ RMSC: R3/R Repair Quantity: 50 EA Surge Option Repair Quantity: 10 EA Point of Contact: Madison Norris at Madison.Norris@us.af.mil Approximate issue date of the solicitation is 12 November 2026. Approximate response date for receipt of proposals is 14 December 2026.
51%
Pre-Solicitation11/05/2026
This is a notice of intent that WR-ALC anticipates soliciting and negotiating a Firm Fixed Price Indefinite Delivery Requirements contract and Cost-Plus Fixed Fee for engineering services, for a 5 Year contract (Basic + 4 ordering periods- out years), the purpose of this requirement is to encompass the repair of various B52 components. The following NSNs require repair- B-52 CONECT components for NSNs 5821016576453CX QTY 171, 5821016576452CX QTY 18, AND 5821016644605CX QTY 20. This effort is intended to be awarded to Honeywell Aerospace in accordance with FAR 6.103-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. Honeywell Aerospace, as one of the Original Equipment Manufacturer (OEM) of the B52 CONECT, is the only company with expertise, equipment, technical data, and specialized skills that can repair these items. However, Interested Party or Person(s) may identify their interest and capability to respond to the requirement or submit a proposal(s). This notice of intent is not a request for competitive proposals. OMBUDSMAN: All potential offeror(s) should contact the buyer/PCO identified above for additional information and/or to communicate concerns, if any, concerning this acquisition. If the contracting officer does not satisfy your concerns, an Ombudsman has been appointed to hear serious concerns that are not resolved through established channels. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate serious contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. When appropriate, potential offeror(s) may contact Ombudsman Nicole Furlough at 730-326-6576. Please be prepared to identify previous contacts made by you to resolve your concerns.
51%
Solicitation02/01/2027
B-52 Data Interface Unit/Data Transfer Receptacle (DTR) The Government is conducting market research to identify potential sources with the expertise, capabilities, experience, facilities, and technical capacity necessary to manufacture/provide and repair the B-52 Data Interface Unit/Data Transfer Receptacle (DTR). The National Stock Number (NSN) and Part Number (PN) are as follows: LRU: NSN 7025-01-738-4504AY, P/N P210015K0001-1, INTERFACE UNIT, DATA This Request for Information (RFI) supports a buy and repair requirement for the new Form, Fit, Function, and Interface (F3I) DTR. Kihomac, Inc. is currently manufacturing the F3I DTR under contract SPRWA1-21-D-0015. The Government owns, or will provide under appropriate controls, the manufacturing and technical data necessary to support competitive production and repair of this item. The Government intends to compete this requirement on the open market to obtain new production units and repair services. The legacy B-52 DTR is repaired by Symetrics Industries (CAGE 22830) under contracts FA8539-20-D-0013 and FA8539-25-D-0004. This market research effort pertains to the F3I DTR identified above, currently being manufactured by Kihomac, Inc. under contract SPRWA1-21-D-0015, and is intended to identify sources capable of supporting competitive manufacture and repair using Government-owned technical data. The DTR is a Line Replaceable Unit (LRU) on the B-52 aircraft, with two DTRs installed per aircraft. The DTR transfers Offensive Avionics System (OAS) information to and from storage on the Data Transfer Cartridge (DTC) across its interface with the Fibre Channel or MIL-STD-1553A data bus system. Additionally, the DTR provides status over the MIL-STD-1553A and Fibre Channel buses indicating that the DTC is successfully installed. The required scope shall include, as applicable, manufacture and delivery of new production DTR units; hardware repair and return of unserviceable DTR units; obsolete parts resolution; engineering support to investigate Deficiency Reports (DRs); Diminishing Manufacturing Sources and Material Shortages (DMSMS) support; development, maintenance, and execution of required inspection, test, and acceptance procedures; and configuration management support to ensure newly manufactured and repaired units conform to the applicable Government-furnished technical data package. All newly manufactured and repaired units must meet applicable form, fit, function, and interface requirements. The contractor shall furnish all necessary material, support equipment, tools, test equipment, facilities, and services required to perform the work. The contractor is responsible for acquiring, maintaining, and calibrating all support equipment required at its primary or subcontractor facilities. Contractor-furnished material or replacement parts must equal or exceed the quality, tolerances, and specifications identified in the applicable technical data package. INSTRUCTIONS: 1. The document(s) below contain a description of the NSN listed for buy and repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. 2. If, after reviewing these documents, you wish to participate in this market research, you should provide documentation demonstrating your company's capability to meet these buy and repair requirements. Failure to provide adequate documentation may prevent the government from properly assessing your capabilities. If you lack sufficient experience in a particular area, please explain how you would overcome this deficiency to fulfill the requirement (e.g., through teaming or subcontracting). a. Identify any specific areas of work that your organization believes should be set aside exclusively for Small Business. 3. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. 4. Questions regarding this market survey should be addressed to Tyler Martens, Program Manager, 478-955-5165 or via email at tyler.martens.2@us.af.mil. DISCLAIMER: This Request for Information is for market research and planning purposes only. This is not a request for proposal, does not constitute a solicitation, and shall not be construed as a commitment by the government to award a contract. Responses to this RFI are not offers, and the Government is under no obligation to award a contract as a result of this announcement. The Government will not pay for any costs associated with the preparation or submission of responses. Any information submitted by respondents is strictly voluntary. CONTRACTOR CAPABILITY SURVEY B-52 Data Interface Unit/Data Transfer Receptacle (DTR) Part I. Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: • Company/Institute Name: • Address: • Point of Contact: • CAGE Code: • Phone Number: • E-mail Address: • Web Page URL: • Size of business pursuant to North American Industry Classification System (NAICS) Code: NAICS Code 811210 – Electronic and Precision Equipment Repair and Maintenance Based on the above NAICS Code, please indicate whether your company is a: • Small Business (Yes / No) • Woman Owned Small Business (Yes / No) • Small Disadvantaged Business (Yes / No) • 8(a) Certified (Yes / No) • HUBZone Certified (Yes / No) • Veteran Owned Small Business (Yes / No) • Service Disabled Veteran Small Business (Yes / No) • System for Award Management (SAM) (Yes / No) • A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). Responses to the Capability Survey Part I and Part II must be received no later than the close of business on 23 November 2026. Please ensure data is in a readable electronic format that can be received through a firewall. Attachments shall not exceed 10 MB per email. Multiple emails are acceptable. Responses must be sent via email to the following: • Chiquita Glover-Perkins, PCO, chiquita.glover-perkins@us.af.mil • Tyler Martens, PM, tyler.martens.2@us.af.mil Questions related to this market research should be addressed to the PM. Part II. Capability Survey Questions A. General Capability Questions: 1. Briefly describe your facility’s capabilities and the goods and/or services you provide. Include a description of your staff composition and management structure. 2. Describe your company’s past experience on previous projects similar in complexity. Include contract numbers, a brief description of the work performed, period of performance, quantities, and agency/organization supported. 3. Describe your company’s experience in repairing B-52 DTRs or comparable avionics Line Replaceable Units (LRUs). 4. Describe your company’s experience in manufacturing B-52 DTRs or comparable avionics LRUs. Include experience with production, assembly, inspection, testing, and delivery of newly manufactured assets. 5. Describe your company’s capabilities for generating, handling, processing, and storing classified material and data, if required for performance of this effort. 6. What is your company’s current maximum monthly capacity for this type of buy-and-repair requirement? Provide separate estimated monthly capacities for newly manufactured units and repaired units. Provide information on any facility reserves or surge capability available to support critical operational mission requirements. 7. What quality assurance processes and test qualification practices does your company employ? Provide a description of your quality program, such as ISO 9001, AS9100, or equivalent. a. Provide a detailed quality plan implementing AS9100, or equivalent, that addresses manufacturing, inspection, testing, repair, configuration management, nonconforming material, and corrective-action processes. B. Repair Questions: 1. Describe your capabilities and experience in repairing existing systems/equipment, including hardware and software, to solve maintenance and support problems in the depot environment. 2. Provide your commercial manual(s) or Acceptance Test Procedures (ATP), along with documentation of your rights to use them, for depot-level repair and functional checks of these or similar assets for Government Engineer review. 3. Describe your capabilities and experience in test, evaluation, repair, and maintenance procedures. 4. Describe your configuration-management processes and how you identify and resolve parts-obsolescence and Diminishing Manufacturing Sources and Material Shortages (DMSMS) problems. 5. Discuss your process for addressing any form, fit, function, interface, quality, or configuration issues that may arise during repair of the assets. 6. Describe your process for maintaining inventory records and reporting on-hand and work-in-process balances, repair status, and asset disposition to your customer. 7. Describe how your organization will use Government-furnished drawings, specifications, technical data, and test procedures to perform the repair requirement. Identify any anticipated technical-data gaps and explain how your organization would address those gaps. 8. If the item cannot be repaired in total, state what portions, assemblies, subassemblies, or components your organization can repair. 9. Discuss any reverse-engineering, component replacement, redesign, or alternate-source opportunities that may be available to support repairability, parts obsolescence, DMSMS resolution, or sustainment of the item. 10. Describe your expected repair turnaround time, including estimated time required for evaluation, repair, testing, quality acceptance, and return shipment. C. Manufacturing Questions 1. Describe your capability to manufacture, assemble, inspect, test, and deliver newly produced B-52 DTR units using Government-furnished manufacturing and technical data. 2. Describe your experience using Government-furnished technical data packages, including drawings, specifications, parts lists, manufacturing instructions, acceptance-test procedures, and configuration-control requirements. 3. Describe the facilities, production lines, special tooling, test equipment, support equipment, and calibration capabilities that would be used to manufacture the DTR. 4. Describe your process for establishing and maintaining production configuration control. Address engineering-change control, material substitutions, deviations, waivers, nonconforming material, and traceability. 5. Identify your estimated lead time for first-unit delivery and recurring production deliveries. Identify any long-lead materials, components, tooling, qualification testing, or supply-chain constraints that could affect delivery. 6. Describe your capability to procure, manufacture, qualify, and maintain traceability for components and replacement parts required to produce the DTR. Include your approach to counterfeit-part prevention and supplier-quality management. 7. Describe your manufacturing inspection and test process, including in-process inspection, final inspection, acceptance testing, and procedures for documenting test results. 8. Describe your process for resolving parts obsolescence and DMSMS issues associated with the production effort while maintaining required form, fit, function, interface, quality, and configuration requirements. 9. Describe your capability to support first article testing, production qualification testing, and any required Government source inspection or acceptance activities. 10. Describe any portion of the manufacturing effort that would require subcontracting, teaming, Government-furnished equipment, Government-furnished material, or additional technical support. D. Commerciality Questions 1. Are there established catalog or market prices for this requirement, or for similar manufactured and repaired assets? 2. If you offer this product and/or service to both the U.S. Government and commercial clients, is the same workforce used for both? 3. Describe your standard warranty and return process for newly manufactured goods and repair services furnished to the Government for items similar in nature to this requirement. E. Continuity of Operations and Cybersecurity 1. Does your company have an active Continuity of Operations Plan (COOP), or equivalent, in the event of a natural disaster or other catastrophic event that causes facilities or operations to be disrupted? 2. What mitigation strategies are in place for your company to resume operations and prevent further disruptions? 3. Is your company facing financial disruption, impending merger, acquisition, and/or foreign investment? 4. If there is Foreign Ownership, Control, or Influence (FOCI) of your company, what percentage of the company is owned by the foreign entity or entities? Which foreign country or countries and entity or entities own part or all of your company? 5. Does your company have a policy or plan for preventing and mitigating risks associated with the security of internal and external information systems? 6. Has your company implemented cybersecurity requirements given in DFARS clause 252.204-7012, “Safeguarding Covered Defense Information and Cyber Incident Reporting,” and DFARS clause 252.204-7021, “Cybersecurity Maturity Model Certification Requirements”? F. Engineering Services Questions 1. Describe your capabilities and experience providing engineering services relevant to the requirements of this effort, including support for both manufactured and repaired assets. 2. Describe your capabilities and experience in developing or modifying manufacturing, inspection, test, repair, and maintenance procedures. Include associated updates to technical orders, technical manuals, work instructions, and preparation of new technical data, as applicable. 3. Demonstrate your ability and experience providing the same or similar services currently offered in commercial and/or military environments by providing the following information on the same or similar items: a. Contract Number b. Procuring Agency c. Contract Value d. Services Provided 4. Describe your capabilities and experience in any required test, evaluation, manufacturing, inspection, and repair processes or procedures with regard to the required items. 5. Describe how your organization will identify and resolve parts-obsolescence and DMSMS problems affecting production and repair of the required items. 6. Discuss your process for addressing any form, fit, function, interface, quality, configuration, or producibility issues that may arise under the requirements of this effort. 7. Describe your process for maintaining inventory records and reporting on-hand and work-in-process balances, manufacturing status, repair status, and asset disposition to your customer, as required. 8. Describe how your organization will use Government-furnished drawings, specifications, technical data, and test procedures to support this effort. Identify any anticipated technical-data gaps and explain your process for resolving those gaps through engineering analysis,Government coordination, or other appropriate means.
49%
Market Research11/23/2026
C-5 COMPUTER, DIGITAL NAICS: 811210 The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to purchase the COMPUTER, DIGITAL. The National Stock Numbers (NSN) and Part Numbers (PN) are as follows: Item: Computer, Digital NSN: 7021015615734UC PN: 714180-67 Item: Computer, Digital NSN: 7021017028465UC PN: 714180-7100 The Computer, Digital provides operator interface with the C-5 aircraft on-board embedded diagnostics system. The Digital, Computer is used for in-flight situational awareness of subsystem health and reports BIT codes while attached to a swivel base mounted on the C-5 navigator's table. The current sustainment life cycle for these items is 2050. The service shall include providing obsolete parts resolution along with the necessary engineering to investigate Deficiency Reports and Material Improvement Projects (MIPs). The COMPUTER, DIGITAL must meet form, fit, function, and interface requirements as referenced in per T.O. 5A13-5-29-3 and 5A13-5-30-3. However, the Government does not own the data or the rights to the data needed to compete the repair of this part. It has been determined to be uneconomical to reverse engineer the data, qualify a new source, or buy the data and/or data rights. MILTOPE CORPORATION is the only source of known repair for this system and has been since it was fielded. The COMPUTER, DIGITAL are currently repaired by MILTOPE CORPORATION under contract FA8538-23-D-0010. The RMC/RMSC code for the COMPUTER, DIGITAL, is R3/R. This service has been performed multiple times by MILTOPE CORPORATION, which is the original manufacturer of the COMPUTER, DIGITAL. Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. MILTOPE CORPORATION is the manufacturer of the COMPUTER, DIGITAL and the known sole source contractor for repair of this item. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey. RFO 15.101(c)(3), applies to this request for information: The Government does not intend to award a contract on the basis of the RFI or otherwise pay for the information requested; and Responses will be treated as information only and not as a proposal. INSTRUCTIONS: The document(s) below contains a description of the COMPUTER, DIGITAL repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Identify any areas of work that your organization believes should be broken out exclusively for Small Business. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Questions relative to this market survey should be addressed to Erika Bell, Program Manager, 730-326-2103 or via email at erika.bell.2@us.af.mil.
48%
Market Research11/20/2026

Additional Details

Solicitation Number

FA8539-26-RFI-APX-119

Archive Date

Jan 5, 2026

Office Address

ROBINS AFB, GA, 31098-1670