Notice ID: 93f969a31f8940d598b45fb97d77c57eSolicitation
ACCURSHEAR MODEL #625012
Archived on September 21, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−04:00
- Posted
- September 6, 2023
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 333515: Cutting Tool and Machine Tool Accessory Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- FA8571 MAINT CONTRACTING AFSC PZIM
- Place of performance
- Warner Robins, GA, 31098
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- FA857123Q0125
- Notice ID
- 93f969a31f8940d598b45fb97d77c57e
Description
The Contractor shall provide the 559th AMXG/MXDEB office at Robins AFB Georgia with a metal sheer as described below. A metal shear is used to cut metal to form/make new metal parts. The mechanic uses the metal to patch and/or replace worn out metal aircraft parts. The Accurshear Model 625012, X 12 Hydraulic Shear. This equipment uses specifications to cut a specific metal thickness and length of metal. The contractor will also provide installation services as well as training IAW the attached PD. This is a Brand name 100% Small Business set aside.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
FA857123Q0125- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 5×SolicitationCurrentAug 22, 2023
ACCURSHEAR MODEL #625012
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
NEW 2026 JOHN DEERE FC15M FLEX WING ROTARY CUTTER 22C0P** MUST BE ABLE TO PRODUCE EQUIPMENT WITHIN 4 WEEKS FROM CLOSING OF SOLICITATION | 59% | Combined Synopsis | 09/16/2026 |
Hydraulic Tools. Amendment to change chain saw part number and add CLIN. | 59% | Combined Synopsis | 08/16/2026 |
Title: Sources Sought / RFI: T-38 Central Fuselage Station (CFS) 505 Drill Fixture Assemblies Notice Type: Sources Sought / Request for Information (RFI) Product Service Code (PSC): 3455 - Cutting Tools for Machine Tools (Alternative: 1560 - Airframe Structural Components) NAICS Code: 333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (Socio-economic Size Standard: 500 Employees) Location: 309th Aircraft Maintenance Group (AMXG) / 575th AMXS, Randolph AFB, TX 78150 1. Disclaimer & Important Notes This is a Request for Information (RFI) / Sources Sought notice only. This notice is issued solely for information, planning, and market research purposes in accordance with FAR 15.201(e). It does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or an invitation for bid. The Government does not intend to award a contract on the basis of this RFI or to otherwise pay for the information solicited. Respondents are advised that the U.S. Government will not be responsible for any costs incurred in preparing or submitting a response to this notice. All submissions will become Government property and will not be returned. Security & Technical Drawing Access Notice: To maintain operational security, no engineering drawings, CAD models, or technical data packages will be uploaded or publicly released during this initial market research phase. The technical sourcing parameters in Section 2 provide sufficient industrial detail for facilities to assess their capabilities. During the subsequent formal solicitation phase, the complete, certified Technical Data Package (TDP)—including all JCG230321 engineering drawings and 3D CAD SolidWorks/STEP/IGES models—will be fully provided under secure DLA Joint Certification Program (JCP) verification to all qualified bidders. 2. Technical Sourcing Profile The Department of the Air Force, 309th Aircraft Maintenance Group (AMXG), 575th AMXS, Randolph AFB, TX, is conducting market research to identify potential sources capable of manufacturing, fabricating, and delivering: Item Description: T-38 CFS 505 Drill Fixtures Kit (Precision drill fixture plate, custom-molded transport case, and corresponding accessories) Design Specification: Fabricated to Drawing Configuration JCG230321 Quantity: Five (5) Configuration Sets Required Lead Time: Three (3) Months / 90 Calendar Days from contract award (Critical Path) FOB Point: FOB Destination (851 4th St West Bldg 241, Randolph AFB, TX 78150) Salient Technical & Manufacturing Parameters: Envelope Dimensions: Approximately 14" Length x 10" Width x 6" Height (to be stored in a custom three-layer foam insert within a Pelican Model 1400 Protector Case). Material Requirements: High-strength tool steels (e.g., A2, D2, or pre-hardened 4140 alloys) requiring precision heat-treatment, stress-relieving, and black oxide or equivalent corrosion-resistant coating. Machining Operations: Substantive multi-axis CNC vertical milling, wire EDM (Electrical Discharge Machining), and precision surface grinding to hold dimensional tolerances down to $\pm$ 0.001 inches on critical interface bores. Packaging, Cushioning, and 3-Layer Kitting: The Pelican Model 1400 case must be configured with three (3) distinct, stacked, and nested layers of precision CNC-cut or water-jet cut, closed-cell polyethylene foam (no pick-and-pluck allowed): Layer 1 (Top Layer): Custom-cut pockets contoured for A and D Holes on the fuselage and boattail sides. Layer 2 (Middle Layer): Custom-cut pockets contoured for B Holes on the fuselage and boattail sides. Layer 3 (Bottom Layer): Custom-cut pockets contoured for C Holes on the fuselage and boattail sides. Each layer shall feature high-contrast lettering identifying components and center finger pulls/tabs for easy lifting. 3. Critical Sourcing & Quality Parameters Buy American & Specialty Metals: This requirement is subject to the Buy American statute (41 U.S.C. Chapter 83) as implemented by FAR Part 25 and DFARS Part 225. In accordance with DFARS 252.225-7009, any specialty metals (including tool steels) used to fabricate the drill fixtures must be melted or produced within the United States or a qualifying allied country. First Article Inspection (FAI): Unless the selected contractor is the original manufacturer or has previously fabricated this exact fixture for the USAF, a First Article Inspection in accordance with AS9102 and a certified CMM dimensional calibration sheet will be required prior to full-scale production. 4. Capability Statement Submission Requirements Interested and capable manufacturing firms are requested to submit a Capability Statement (not exceeding 4 pages) addressing the following: Company Profile: Company Name, Physical Address, CAGE Code, UEI, active Joint Certification Program (JCP) Number (DD Form 2345), and Small Business socio-economic status. Machining Competency: Describe your facility's in-house equipment (e.g., multi-axis CNC mills, wire EDM, surface grinders, and Coordinate Measuring Machines) and your experience holding tolerances of $\pm$ 0.001 inches on tool steel. Past Performance: Provide up to three (3) examples of similar high-tolerance aerospace assembly tooling, drill jigs, or flight-critical fixtures manufactured by your firm within the last 3 years. Lead Time Feasibility: Confirm whether your firm can source raw specialty steels, program tooling paths, fabricate, perform heat treatment, and deliver 5 completed assemblies within 90 calendar days of contract award. If 90 days is not feasible, provide your best realistic lead time. Rough Order of Magnitude (ROM): Provide a non-binding estimated cost range for fabricating 5 units of the drill fixture kit. If possible, please break down estimated machining labor hours versus raw material costs. Submission Email: joshua.akinwande.2@us.af.mil Submission Deadline: November 17, 2026, by 1500 MST Email Subject Line: RFI Response: T-38 CFS 505 Drill Fixtures - [Your Company Name] | 57% | Market Research | 11/17/2026 |
UT-Battelle, LLC. (the Company), is the Management and Operations Contractor for the Oak Ridge National Laboratory (ORNL), located in Oak Ridge, Tennessee. The Company seeks proposals for the Machine Tool Cutting Tools and Toolholders, or their domestic equivalents, to support a department of Energy (DOE) funded project. Request for Quotation - RFQ - PR517120, Machine Tool Cutting Tools and Toolholders Attachment A - Terms and Conditions - Purchase Order Commercial Products and Services, dated 09.30.2026 Attachment B - Prime Flowdown Clauses, dated 09.30.2026 Attachment C - Bill of Materials - PR517120 Attachment D - Reps and Certs - Abbreviated - 03.09.2026 FAR 52.211-6, Brand Name or Equal applies. | 55% | Combined Synopsis | 11/18/2026 |
This is a solicitation for a commercial supply. W91243-26-Q-A008 is being issued as a Request for Quote. This solicitation, and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06. There is no set-aside being used with this requirement. This requirement has a NAICS code of 333515. The Nebraska Army National Guard (NEARNG) does not intend to pay for any information provided under this notice and is not obligated to notify respondents of this notice. CLIN 0001: Computerized Mat Cutter Specifications: Digital Depth Control Auto Homing LED Indicator Lights Collision Detection and Avoidance System Design and Cut Software with the ability to use DXF files created in a design program Floor Stand45 Standard Bevel Cartridge45 + Deep Bevel Cartridge52 Intricate Bevel Cartridge90 Straight Cartridge Debossing Kit (3 tip sizes)Pen Kit Quick Change Cartridge System Edge to Edge Cutting Ability to cut Mat Board, Foam Core, and Vinyl Air Compressor On-site Professional Installation and Training2 Year Computerized Mat Cutter (CMC) Warranty Evaluation Process: The Government will award a contract resulting from this solicitation to the offer responsible whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Specifications and Price. Questions are due NLT 10:00 CST on 24 August 2026.Offerors are due NLT 10:00 CST on 3 September 2026.Late or incomplete offers will not be accepted.Point of Contact: Patti Lee-Smith, Contracting Officer Address: 2433 NW 24th Street, Lincoln, NE 68524Phone: 402-309-8294 Email: patricia.h.lee-smith.civ@army.milAttachments: QA Log CLS | 55% | Solicitation | 09/03/2026 |
Additional Details
Solicitation Number
FA857123Q0125
Archive Date
Sep 21, 2023
Office Address
ROBINS AFB, GA, 31098-1672