Notice ID: 4b93797382ed4f79bc4cb7fc3786bcf7Combined Synopsis/Solicitation
EBIC SYSTEM
Archived on October 9, 2026. Combined Synopsis/Solicitation posted by DEPT OF DEFENSE (DEPT OF THE AIR FORCE) on September 23, 2026. Solicitation FA8601_EBIC_SYSTEM.
NAICS 334516 (Analytical Laboratory Instrument Manufacturing). Set-aside: No Set aside used. Place of performance: Wright Patterson AFB, Ohio. Original response deadline: . Full description on SAM.gov.
Description
**Amendment 01*
The purpose of this Amendment 01 is to revised the requirments in the Statement of Work, specifically paragraph 4(B) Item 2.4 (Probing). See attached revised SOW (SOW_EBIC 23 SEP 2026)
The changes are as follows:
"The system must include a means of making electrical contact with samples inside the SEM chamber such that the signal can pass to the SEM data stream. Solutions may consist of a micro-manipulator or nanoprobing solution that allows for in-situ adjustment, or may require ex-situ preparation (e.g., wire-bonding and packaging)."
Combined Synopsis/Solicitation
AFLCMC/PZI Installation Contracting Support
Wright Patterson AFB, OH 45433
Date: 17 SEP 2026
Title: AFIT EBIC System
Request for Quote (RFQ) / Solicitation Number: FA8601-EBIC_SYSTEM
Quotes Due: 22 SEP 2026 at 12:00 PM EST
Contact Point(s): TSgt Adam Holden, Contract Specialist; adam.holden.1@us.af.mil
Contact Point(s): Jessica Stamper, Contracting Officer; jessica.stamper.2@us.af.mil
Description: This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with RFO Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.
Solicitation number FA8601-EBIC_SYSTEM is issued as a Request for Quotation (RFQ) for AFIT EBIC System at Wright Patterson Air Force Base as described under the requirements section of this combined synopsis/solicitation and accompanying requirements attachment.
This acquisition is set-aside for small business concerns under NAICS code 334516 – Analytical Laboratory Instrument Manufacturing with a small business size of 1,000 employees. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
The Government reserves the right to conduct interchanges with some, none, or all offerors, or make no award at all depending upon: An award, if any, will be made LPTA. Ie, to the lowest priced Offeror who submits a proposal that:
- Conforms to the requirements of the combined synopsis/solicitation.
- Receives a rating of “Acceptable” on the Technical Capability evaluation factor.
- Contains the lowest evaluated price (TEP), provided that the TEP is not unbalanced and is fair and reasonable.
The Government also reserves the right to cancel this solicitation, either before or after the closing date.
1. Requirement:
This requirement is for AFIT EBIC System at Wright Patterson Air Force Base in accordance with the Statement of Work (SOW).
2. Period of Performance:
No later than 8 months ARO.
3. Provisions and Clauses:
See solicitation attachment for applicable provisions and clauses that apply to this acquisition. Offerors shall complete and include in quotations all representations and certifications, as well as all fill-in provisions and clauses, contained within this solicitation. Additionally, quotations that contain pricing only with no description/detail of the equipment that will be provided will not be accepted or considered for award. NOTE: In accordance with deviation R-DFARS 252.204-7998(g), the offeror's quote submission legally binds and certifies that its SAM registration is current, complete, accurate, and has been updated within the preceding 12 months as of the offer's date.
**NOTE** Mandatory Cybersecurity Maturity Model Certification (CMMC) Level 1 Assessment:
In accordance with DFARS 252.204-7021 and DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors. To be eligible for contract award, offerors must demonstrate full compliance with the 15 basic safeguarding requirements outlined in FAR 52.240.93.
The contractor is responsible for entering the assessment results into the Procurement Integrated Enterprise Environment (PIEE), specifically within the Supplier Performance Risk System (SPRS) module. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record.
4. Request for Information (RFIs):
The Government will accept questions concerning this solicitation until 21 SEP 2026 at 12:00 PM EST. Email your questions on a .pdf, .doc, .docx, .xls or .xlsx document to adam.holden.1@us.af.mil and jessica.stamper.2@us.af.mil. Any questions received after this date and time may not be considered.
5. Quotes Due Date:
Quotes must be submitted electronically to the Contract Specialist via e-mail at adam.holden.1@us.af.mil and Contracting Officer at jessica.stamper.2@us.af.mil. Quotes must include all applicable shipping costs to include insurance. Quotes must conform to the requirements of this solicitation and be received no later than 22 SEP 2026 at 12:00 PM EST. It is the responsibility of the offeror to ensure that the quote and its attachments are received. Any correspondence sent via e-mail must contain the subject line “FA8601-EBIC_SYSTEM” The entire quotation must be contained in a single e-mail that does not exceed 5 megabytes including attachments, if any. E-mails with compressed files are not permitted. Note that e-mail filters at Wright-Patterson Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. If a DoDSafe drop off is needed, please notify the contract specialist or contracting officer at least 48 hours before quotes are due. Any quotes received after designated closing date and time need not be considered. Quotes must include aggregate total of base plus all option year CLINS, if requested (IAW RFO 52.217-5 Evaluation of Options). All quotes shall be in whole dollars and conform to the Contract Line-Item Number (CLIN) structure of attached solicitation.
6. Notice to Vendor(s):
All vendors must fully complete and return the 'Required Information Sheet' (attached to the solicitation) and return with their quotation. Additionally, quotations that contain pricing only with no description/detail of the supply/service that will be provided will not be accepted or considered for award.
7. Tariffs:
In accordance with R-DFARS 252.225-7013, the contractor is prohibited from including any amount for customs duties on eligible items within the quote price. The claim for duty-free entry is restricted to supplies destined for government use, either as end items or as components thereof. The Government will provide assistance in the process of obtaining duty-free entry.
8. Period of Acceptance of Quotes:
Offeror agrees to hold prices in its quote firm for 60 calendar days from the date specified for receipt of offers.
9. SAM Registration:
Firms submitting a quote for the solicitation described herein, MUST be registered in the System for Award Management (SAM) database, or risk the quote as being non-responsive, regardless of the package being considered complete, timely or any other salient consideration. Information to register on SAM can be found at the web site, SAM.gov.
List of Attachments:
- Statement of Work
- Required Information Sheet
Overview
Agency:
Department of WarDepartment of the Air Force
Office:AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.FA8601 AFLCMC PZIO
Posted:September 23, 2026
NAICS:334516: Analytical Laboratory Instrument Manufacturing
Last Updated:Oct 9, 2026
PSC:6640: LABORATORY EQUIPMENT AND SUPPLIES
Response Deadline:
Set-Aside:No Set aside used
Type:Combined Synopsis/Solicitation
Place of Performance:Wright Patterson AFB, Ohio, 45433
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Adam Holden
Secondary Contact
Jessica Stamper
Documents
Select documents to download
Showing 3 of 3 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Sep 23, 2026 | 14.45 KB | |||
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Sep 23, 2026 | 34.33 KB | |||
| Combined Synopsis/Solicitation | DEPT OF THE AIR FORCE | Sep 23, 2026 | 34.3 KB |
Lifecycle
Solicitation:
FA8601_EBIC_SYSTEM- Combined Synopsis
- 2×
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: AFLCMC Operational Contracting Branch at Wright-Patterson Air Force Base, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including small businesses, capable of manufacturing and delivering customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services. These precision optical components will support AFIT’s Extreme Light Laboratory and its ultra-intense laser experiments involving advanced laser-matter interactions. This notice is issued solely to determine the availability and capability of qualified sources to meet the Government’s requirements. This notice is not a solicitation, request for quotation, or commitment by the Government to award a contract. A small business set-aside determination has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all labor, materials, equipment, manufacturing capability, quality assurance, testing, inspection documentation, packaging, transportation, and other resources necessary to produce and deliver customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services to the Air Force Institute of Technology (AFIT) at Wright-Patterson Air Force Base, Ohio. The required items and services include, but are not limited to: System and Compatibility Requirements: a. The contractor shall provide 66 customized off-axis parabolic (OAP) mirrors for use in AFIT’s Extreme Light Laboratory. b. Each mirror shall use a fused-silica substrate. c. Each mirror shall have a diameter of 30 mm. d. Each mirror shall have a parabolic focus at 45 degrees. e. The mirrors shall be compatible with the Government’s ultra-intense laser research application and shall provide the precision focal spot required for the Extreme Light Laboratory. Performance and Operational Specifications: a. The optical surface roughness shall be less than 1 nm root mean square (RMS). b. The scratch/dig specification shall be 20-10. c. The backside of each mirror substrate shall be polished. d. The contractor shall perform quality testing and inspection sufficiently to verify compliance with all required optical and surface-quality characteristics. e. The contractor shall provide applicable test data and inspection documentation with the delivered mirrors. Reagents and Consumables: a. The contractor shall provide protected-gold coating services for the required OAP mirrors. b. The protected gold coating shall be applied to the fused-silica substrate. c. The coating shall provide an average reflectivity of not less than 97 percent. d. The required reflectivity wavelength shall be 780 ± 40 nm. e. The required angle of incidence shall be 45 degrees. f. The contractor shall provide all materials, coating consumables, and related manufacturing resources necessary to meet the stated coating requirements. Physical and Safety Specifications: a. The contractor shall package and protect the mirrors to prevent damage during handling, shipment, and delivery. b. The contractor shall provide all required quality, inspection, and test documentation with delivery, including available certificate of conformance, material certification, surface-measurement data, and coating-performance data, as applicable. c. The contractor shall ship all required mirrors and associated documentation to the Government-designated delivery location at Wright-Patterson Air Force Base, Ohio. d. Delivery shall be completed within 98 calendar days after receipt of order (ARO). e. The mirrors delivered shall be free from defects in material and workmanship under normal and proper use for a minimum period of two years after Government receipt. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company business size status under a relevant NAICS code 334516. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than October 23, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: “FA860127Q0003, Sources Sought: Off-Axis Parabolic Mirrors.” Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. Please submit all response packages directly to the following Points of Contact (POCs): Contract Specialist: Name: Alejandro Quiles Email: alejandro.quiles_sanchez.1@us.af.mil Contracting Officer: Name: Jessica Stamper Email: jessica.stamper.2@us.af.mil This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government’s assessment of the capability statements received will factor in whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Statement of Work List of Minimun Requirements | Market Research | 334516 | No Set-Aside | 10/14/2026 | 10/23/2026 | Wright Patterson AFB, OH | |
The following questions were received for Request for Quote (RFQ) FA226326Q0017, Dual Axis Digital Autocollimator, and are answered below. For prompt response, please note that any communications regarding this RFQ should reference FA226326Q0017 and be submitted to christine.patterson.1@us.af.mil or michael.hickey.2@us.af.mil. Solicitation Amendment 0001 - 10 July 2026 Question: 05 August 2026 is less than a month away. It seems like a hard deadline in the documents, but it's much sooner than we expected for this. Is there any chance to push it later by a month? Answer: The solicitation has been extended 30 days. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Please ensure to review and submit the required AMENDED documents when preparing your response. Solicitation Amendment 0002 – 27 July 2026 Question: 3.1. User Interface: The DADA shall have an LCD Display with PC user interface controls. Which is preferred: 1) Laptop; or, 2) 19” Rack Mount PC? Answer: 3.1 – PC is only required if it is the LCD display. If so, ideally it is a laptop. But, for this paragraph, we need the display to have an output to communicate with a PC (if it isn’t the display already). Question: 3.2.4 The DADA Shall come with a Right-Angle Target mirror in mount. Can the user please describe how the mirror should be set up? Is there a sketch that shows what is meant, or can it be described again? It's not clear to us exactly what is required. Answer: 3.2.4 – Mirror shall be such that it can have reference feet that are perpendicular to the mirror surface, thus it can be used to measure flatness of a surface with the autocollimator. __________ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Revolutionary FAR Overhaul (RFO) Subpart 12.201-1, as supplemented with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the RFO and Department of Defense Federal Acquisition Regulation Supplement (DFARS) Revolutionary FAR Overhaul Class Deviations (R-DFARS). RFO regulations are available electronically at the Air Force FAR site, https://www.acquisition.gov/far-overhaul and R-DFARS guidance can be located at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. This announcement constitutes the only solicitation for which a Request for Quotation (RFQ) will be issued. It is the offeror's responsibility to monitor this site for the release of amendments (if any). The RFQ number is FA226326Q0017 and shall be referenced on any offer submitted. The North American Industry Classification System (NAICS) code for this acquisition is 334516 and the business size standard is 1000 employees. This RFQ is being solicited as a Full and Open Competition. AFMETCAL at Heath OH intends to award a firm-fixed price Indefinite Delivery Indefinite Quantity (IDIQ) contract under Simplified Acquisition Procedures (SAP) in accordance with RFO Part 12.201-1 – Simplified Procedures and RFO Part 12-Acquisition of Commercial Products and Commercial Services, for the purchase of Dual Axis Digital Autocollimators. The anticipated Best Estimated Quantity (BEQ) for this acquisition is 39 units over five (5) years with one (1) additional Option Year. There is no guarantee that all units included in the BEQ will be ordered. Products offered shall be commercial items or commercially available off-the shelf (COTS) items meeting the definitions in RFO Part 2. Items proposed shall be new units. Reconditioned, remanufactured, or used items are not acceptable and shall not be proposed. The units must meet the requirements of Purchase Description (PD) 26M-258A-OP Rev. 2, dated 16 June 2026. The RFQ, PD, DD 1423 Data Requirements, Anticipated Delivery Locations and other applicable solicitation attachments are available for download at this site. Please review ALL documents carefully. IMPORTANT NOTICE TO OFFERORS: All prospective awardees are required to register at SAM and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area WorkFlow (WAWF) through Procurement Integrated Enterprise Environment (PIEE) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at https://wawf.eb.mil. Prior to submitting invoices in the production system, contractors must register for an account at https://wawf.eb.mil/. Offers MUST: (1) be valid for ninety (90) days from the RFQ closing date, (2) submit commercial or COTS unit for evaluation with written proposal, (3) be for the items described in the PD (List of Attachments, Attachment 1), (4) be for new units (not reconditioned, remanufactured, or used unit), (5) be FOB Destination to AFMETCAL, Heath, OH, (6) include a delivery schedule, if unable to meet delivery schedule in Deliveries and Performance section, (7) include copy of commercial price list, (8) include name of and be signed by an authorized company representative along with telephone number, facsimile number, and email address, (9) include taxpayer identification number (TIN), CAGE Code Number and DUNS Number, (10) include a technical proposal that includes a written line-by-line response to the PD, (11) include a copy of the warranty addressed in the PD (List of Attachments, Attachment 1, Item 4.8), (12) include completed Supplies or Services and Price/Cost section, (13) include a completed Total Evaluated Price Worksheet (Attachment 6 AMENDED), (14) completed Offeror Representations and Certifications – Commercial Items. Offerors shall ensure information in SAM is current. The Government reserves the right to incorporate the successful offeror’s technical proposal into any contract resulting from this solicitation. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Offerors shall submit electronic files to DoD SAFE, https://safe.apps.mil following the instructions provided in Instructions to Offerors (Attachment 4 AMENDED) of the RFQ, under Electronic Proposal Submission. Offers submitted in forms other than through DoD Safe are not permissible and will not be considered. Please note that the uploaded files must be timestamped by the offer due date and time. Offerors bear the risk for receipt of submitted offers being untimely. Offerors shall allow sufficient time for receipt of electronic submissions by the due date and time. All responsible sources may submit an offer, which if received timely shall be considered by this agency. | Combined Synopsis | 334516 | No Set-Aside | 07/27/2026 | 09/04/2026 | Heath, OH | |
The following question was received for Request for Quote (RFQ) FA226326Q0017, Dual Axis Digital Autocollimator, and is answered below. For prompt response, please note that any communications regarding this RFQ should reference FA226326Q0017 and be submitted to christine.patterson.1@us.af.mil or michael.hickey.2@us.af.mil. Solicitation Amendment 0001 - 10 July 2026 Question: 05 August 2026 is less than a month away. It seems like a hard deadline in the documents, but it's much sooner than we expected for this. Is there any chance to push it later by a month? Answer: The solicitation has been extended 30 days. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Please ensure to review and submit the required AMENDED documents when preparing your response. __________ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Revolutionary FAR Overhaul (RFO) Subpart 12.201-1, as supplemented with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the RFO and Department of Defense Federal Acquisition Regulation Supplement (DFARS) Revolutionary FAR Overhaul Class Deviations (R-DFARS). RFO regulations are available electronically at the Air Force FAR site, https://www.acquisition.gov/far-overhaul and R-DFARS guidance can be located at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. This announcement constitutes the only solicitation for which a Request for Quotation (RFQ) will be issued. It is the offeror's responsibility to monitor this site for the release of amendments (if any). The RFQ number is FA226326Q0017 and shall be referenced on any offer submitted. The North American Industry Classification System (NAICS) code for this acquisition is 334516 and the business size standard is 1000 employees. This RFQ is being solicited as a Full and Open Competition. AFMETCAL at Heath OH intends to award a firm-fixed price Indefinite Delivery Indefinite Quantity (IDIQ) contract under Simplified Acquisition Procedures (SAP) in accordance with RFO Part 12.201-1 – Simplified Procedures and RFO Part 12-Acquisition of Commercial Products and Commercial Services, for the purchase of Dual Axis Digital Autocollimators. The anticipated Best Estimated Quantity (BEQ) for this acquisition is 39 units over five (5) years with one (1) additional Option Year. There is no guarantee that all units included in the BEQ will be ordered. Products offered shall be commercial items or commercially available off-the shelf (COTS) items meeting the definitions in RFO Part 2. Items proposed shall be new units. Reconditioned, remanufactured, or used items are not acceptable and shall not be proposed. The units must meet the requirements of Purchase Description (PD) 26M-258A-OP Rev. 2, dated 16 June 2026. The RFQ, PD, DD 1423 Data Requirements, Anticipated Delivery Locations and other applicable solicitation attachments are available for download at this site. Please review ALL documents carefully. IMPORTANT NOTICE TO OFFERORS: All prospective awardees are required to register at SAM and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area WorkFlow (WAWF) through Procurement Integrated Enterprise Environment (PIEE) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at https://wawf.eb.mil. Prior to submitting invoices in the production system, contractors must register for an account at https://wawf.eb.mil/. Offers MUST: (1) be valid for ninety (90) days from the RFQ closing date, (2) submit commercial or COTS unit for evaluation with written proposal, (3) be for the items described in the PD (List of Attachments, Attachment 1), (4) be for new units (not reconditioned, remanufactured, or used unit), (5) be FOB Destination to AFMETCAL, Heath, OH, (6) include a delivery schedule, if unable to meet delivery schedule in Deliveries and Performance section, (7) include copy of commercial price list, (8) include name of and be signed by an authorized company representative along with telephone number, facsimile number, and email address, (9) include taxpayer identification number (TIN), CAGE Code Number and DUNS Number, (10) include a technical proposal that includes a written line-by-line response to the PD, (11) include a copy of the warranty addressed in the PD (List of Attachments, Attachment 1, Item 4.8), (12) include completed Supplies or Services and Price/Cost section, (13) include a completed Total Evaluated Price Worksheet (Attachment 6 AMENDED), (14) completed Offeror Representations and Certifications – Commercial Items. Offerors shall ensure information in SAM is current. The Government reserves the right to incorporate the successful offeror’s technical proposal into any contract resulting from this solicitation. Offers must be received no later than 04 September 2026 at 2:00 PM EDT. Offerors shall submit electronic files to DoD SAFE, https://safe.apps.mil following the instructions provided in Instructions to Offerors (Attachment 4 AMENDED) of the RFQ, under Electronic Proposal Submission. Offers submitted in forms other than through DoD Safe are not permissible and will not be considered. Please note that the uploaded files must be timestamped by the offer due date and time. Offerors bear the risk for receipt of submitted offers being untimely. Offerors shall allow sufficient time for receipt of electronic submissions by the due date and time. All responsible sources may submit an offer, which if received timely shall be considered by this agency. | Combined Synopsis | 334516 | No Set-Aside | 07/10/2026 | 09/04/2026 | Heath, OH | |
Amendment 5: Providing Questions & Answers, Revised Minimum Requirements Document (MRD), and extending the due date of responses to 23 October 2026 @ 5:00 PM ET. ***If revising your quote: If a quote was previously submitted and requires updates based on the Q&A and revised MRD, please update your quote package accordingly and resubmit prior to the new deadline. ***If NO changes are required: If no changes are required, you must still resubmit your quote with an updated submission date. Previously submitted quotes will not be pulled forward or considered; a fresh submission is required to be eligible for award. Amendment 4: Extending the due date of responses to 8 October 2026 @ 5:00 PM ET. Amendment 3: Extending the due date of responses to 1 October 2026 @ 5:00 PM ET. Amendment 2: Extending the due date of responses to 24 September 2026 @ 5:00 PM ET. Amendment 1: Extending the due date of responses to 17 September 2026 @ 5:00 PM ET. GENERAL STATEMENT: This is a combined synopsis/solicitation for a commercial item issued by the AFRL/RMZB, Wright-Patterson Air Force Base, Ohio. This announcement constitutes the only solicitation being issued for the requirement described herein. SOLICITATION INFORMATION Solicitation Number: COMBO-AFRL-RMZB-2026-0018 [X] Request for Quotation (RFQ) [ ] Request for Proposal (RFP) [ ] Invitation for Bid (IFB) REGULATION IDENTIFICATION: This solicitation and the incorporated provisions and clauses are those in effect through Revolutionary FAR Overhaul (RFO) Part 12 – Acquisition of Commercial Products and Services, 20 April 2026. NOTICE OF SMALL BUSINESS SET-ASIDE: Set-aside Type: Not Applicable NAICS Size Standard: 334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals LISTING/DESCRIPTION OF ITEMS: CLIN #: 0001 DESCRIPTION: The vendor shall provide a PXI Timing, Synchronization, and Data Acquisition System IAW Minimum Requirements Document dated 7 October 2026. QTY: 1 UNIT: EA DELIVERY INFORMATION: FOB: [X] Destination [ ] Origin Place of Delivery: 3109 Hobson Way Bldg 622 WPAFB, OH 45433 Requested Date of Delivery: As soon as possible INSTRUCTIONS TO OFFERORS: The provision at RFO 52.212-1, Instructions to Offerors – Commercial Products and Services, applies to this acquisition. Addenda: N/A EVALUATION OF OFFERS: The provision at RFO 52.212-2, Evaluation – Commercial Products and Services, will be used to evaluate quotes received. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest Price Technically Acceptable (1) Price (2) Technical Acceptability (a) In order for this quote to be considered “Technically Acceptable” it must meet all specification requirements in the Minimum Requirements Document dated 7 October 2026. The Government will use the following process to evaluate proposals if more than five (5) offers are receivied: Step 1: Proposals will be ranked by total price (lowest to highest) Step 2: Starting with the lowest priced proposal, the government will evaluate that proposal to determine if it is rated Acceptable. Step 3: If the lowest priced proposal is rated Acceptable and also conforms to the requirements of the RFQ, award will be made to that Offeror. If the lowest priced proposal ranked in Step 1, is not rated Acceptable or does not conform to the RFQ requirements, the Government will evaluate the next lowest price proposal to determined it is rated Acceptable and conforms to the RFQ requirements. If that proposal is rated Acceptable and conforms to the FOPR requirements, award will be made to that Offeror. This process will be followed until a proposal is found to be acceptable and conforms to the RFQ requirements. Once that happens, the Government will not evaluate any further proposals. Therefore, it is possible the Government will not evaluate all proposals submitted for technical acceptability. Offerors shall assume that the Government has no prior knowledge of its facilities, capabilities, and experience and will base the evaluation solely on the information presented in the Offeror’s proposal. The Government reserves the right to award all, some, or none, of the items listed in this solicitation. The Government reserves the right to resolicit if results garner only one qualifying quote, if it’s determined to be in the best interests of the Government. CONTRACT TERMS & CONDITIONS: The clause at RFO 52.212-4, Terms and Conditions – Commercial Products and Services, applies to this acquisition. Addenda: N/A REQUIRED PROVISIONS: In accordance with RFO 12.205(a)(3) and R-DFARS 212.205 Table 212.2, the following provisions are incorporated if applicable based on the provision prescription: RFO 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions RFO 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation RFO 52.204-7 System for Award Management—Registration RFO 52.204-7 with Alt I System for Award Management—Registration, with Alternate I RFO 52.204-90 Offeror Identification RFO 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) RFO 52.209-12 Certification Regarding Tax Matters RFO 52.219-2 Equal Low Bids RFO 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products RFO 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan RFO 52.222-90 Addressing DEI Discrimination by Federal Contractors RFO 52.223-4 Recovered Material Certification RFO 52.225-2 Buy American Certificate RFO 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate RFO 52.225-6 Trade Agreements-Certificate RFO 52.225-20 Prohibition on Conducting Restricted Business Operations in Sudan-Certification RFO 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications RFO 52.226-3 Disaster or Emergency Area Representation RFO 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation RFO 52.240-90 Security Prohibitions and Exclusions Representations and Certifications R-DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials R-DFARS 252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements R-DFARS 252.204-7024 Notice on the Use of Supplier Performance Risk System R-DFARS 252.215-7008 Only One Offer R-DFARS 252.215-7010 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data R-DFARS 252.215-7016 Notification to Offerors – Postaward Debriefings R-DFARS 252.219-7000 Advancing Small Business Growth R-DFARS 252.225-7000 Buy American – Balance of Payments Program Certificate R-DFARS 252.225-7020 Trade Agreements Certificate R-DFARS 252.225-7031 Secondary Arab Boycott of Israel R-DFARS 252.225-7035 Buy American – Free Trade Agreements – Balance of Payments Program Certificate R-DFARS 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism R-DFARS 252.225-7055 Representation Regarding Business Operations with the Maduro Regime R-DFARS 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region— Representation REQUIRED CLAUSES: In accordance with RFO 12.205(b)(2) and R-DFARS 212.205 Table 212.3, the following provisions are incorporated if applicable based on the clause prescription: RFO 52.203-3 Gratuities RFO 52.203-6 with Alt I Restrictions on Subcontractor Sales to the Government RFO 52.203-13 Contractor Code of Business Ethics and Conduct RFO 52.203-17 Contractor Employee Whistleblower Rights RFO 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements RFO 52.204-9 Personal Identity Verification of Contractor Personnel RFO 52.204-13 System for Award Management—Maintenance RFO 52.204-91 Contractor identification RFO 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment RFO 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters RFO 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations RFO 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns RFO 52.219-6 Notice of Total Small Business Set-Aside RFO 52.219-6 with Alt I Notice of Total Small Business Set-Aside, with Alternate I RFO 52.219-8 Utilization of Small Business Concerns RFO 52.219-9 Small Business Subcontracting Plan RFO 52.219-9 with Alt I Small Business Subcontracting Plan, with Alternate I RFO 52.219-9 with Alt II Small Business Subcontracting Plan, with Alternate II RFO 52.219-9 with Alt III Small Business Subcontracting Plan, with Alternate III RFO 52.219-9 with Alt IV Small Business Subcontracting Plan, with Alternate IV RFO 52.219-14 Limitations on Subcontracting RFO 52.219-16 Liquidated Damages—Subcontracting Plan RFO 52.219-33 Nonmanufacturer Rule RFO 52.222-3 Convict Labor RFO 52.222-19 Child Labor—Cooperation with Authorities and Remedies RFO 52.222-35 Equal Opportunity for Veterans RFO 52.222-35 with Alt I Equal Opportunity for Veterans, with Alternate I RFO 52.222-36 Equal Opportunity for Workers with Disabilities RFO 52.222-36 with Alt I Equal Opportunity for Workers with Disabilities, with Alternate I RFO 52.222-37 Employment Reports on Veterans RFO 52.222-40 Notification of Employee Rights Under the National Labor Relations Act RFO 52.222-50 Combating Trafficking in Persons RFO 52.222-50 with Alt Combating Trafficking in Persons, with its Alternate I RFO 52.222-54 Employment Eligibility Verification RFO 52.222-62 Paid Sick Leave Under Executive Order 13706 RFO 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items RFO 52.223-9 with Alt I Estimate of Percentage of Recovered Material Content for EPA-Designated Items, with Alternate I RFO 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons RFO 52.223-20 Aerosols RFO 52.223-21 Foams RFO 52.223-23 Sustainable Products and Services RFO 52.224-3 Privacy Training RFO 52.224-3 with Alt I Privacy Training, with Alternate I RFO 52.225-1 Buy American-Supplies RFO 52.225-1 with Alt I Buy American-Supplies, with Alternate I RFO 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act RFO 52.225-3 with Alt II Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate II RFO 52.225-3 with Alt III Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate III RFO 52.225-3 with Alt IV Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate IV RFO 52.225-5 Trade Agreements RFO 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States RFO 52.225-26 Contractors Performing Private Security Functions Outside the United States RFO 52.226-4 Notice of Disaster or Emergency Area Set-Aside RFO 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area RFO 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving RFO 52.229-12 Tax on Certain Foreign Procurements RFO 52.232-29 Terms for Financing of Commercial Products and Commercial Services RFO 52.232-30 Installment Payments of Commercial Products and Commercial Services RFO 52.232-33 Payment by Electronic Funds Transfer—System for Award Management RFO 52.232-34 Payment by Electronic Funds Transfer—Other than System for Award Management RFO 52.232-36 Payment by Third Party RFO 52.232-40 Providing Accelerated Payments to Small Business Subcontractors RFO 52.233-3 Protest After Award RFO 52.233-4 Applicable Law for Breach of Contract Claim RFO 52.240-91 Security Prohibitions and Exclusions RFO 52.240-91 with Alt I Security Prohibitions and Exclusions, with Alternate I RFO 52.240-92 Security Requirements RFO 52.240-92 with Alt II Security Requirements with Alternate II RFO 52.240-93 Basic Safeguarding of Covered Contractor Information Systems RFO 52.244-6 Subcontracts for Commercial Products and Commercial Services RFO 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels RFO 52.247-64 with Alt I Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate I RFO 52.247-64 with Alt II Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate II R-DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials R-DFARS 252.203-7002 Requirements to Inform Employees of Whistleblower Rights R-DFARS 252.204-7020 DoD Assessment Requirements R-DFARS 252.204-7021 Cybersecurity Maturity Model Certification Requirements R-DFARS 252.204-7022 Expediting Contract Closeout R-DFARS 252.204-7023 Reporting Requirements for Contracted Services R-DFARS 252.205-7000 Provision of Information to Cooperative Agreement Holders R-DFARS 252.211-7003 Item Unique Identification and Valuation R-DFARS 252.211-7008 Use Of Government – Assigned Serial Numbers R-DFARS 252.216-7010 Postaward Debriefings for Task Orders and Delivery Orders R-DFARS 252.219-7003 Small Business Subcontracting Plan (DoD Contracts) R-DFARS 252.223-7008 Prohibition of Hexavalent Chromium R-DFARS 252.225-7001 Buy American and Balance of Payments Program R-DFARS 252.225-7012 Preference for Certain Domestic Commodities R-DFARS 252.225-7021 Trade Agreements R-DFARS 252.225-7036 Buy American - Free Trade Agreements - Balance of Payments Program R-DFARS 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten R-DFARS 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime R-DFARS 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region R-DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns R-DFARS 252.227-7015 Technical Data – commercial Products and Commercial Services R-DFARS 252.227-7037 Validation of Restrictive Markings on Technical Data R-DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports R-DFARS 252.232-7006 Wide Area Workflow Payment Instructions R-DFARS 252.232-7010 Levies on Contract Payments R-DFARS 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel R-DFARS 252.237-7019 Training for Contractor Personnel Interacting with Detainees R-DFARS 252.243-7002 Requests for Equitable Adjustment R-DFARS 252.244-7000 Subcontracts for Commercial Products and Commercial Services R-DFARS 252.247-7023 Transportation of Supplies by Sea R-DFARS 252.247-7028 Application for U.S. Government Shipping Documentation/Instructions ADDITIONAL CLAUSES: Refer to R-DFARS 212.205-70 Table 212.4 for a list of clauses to be included in specified categories of contracts for commercial products and commercial services. Applicable clauses will be included in the contract. ADDITIONAL CONTRACT REQUIREMENTS: Offeror shall include all warranty requirements and documentation with quote. Offerors shall identify how long the quote is valid. DPAS APPLICABILITY: This requirement is not applicable to the Defense Priorities and Allocations System (DPAS). SOLICITATION CLOSING INFORMATION: Quotes are due by: 23 October 2026 @ 5:00 PM ET. Quotes must be received by the closing date stated above. Submit quotes by email. POINT OF CONTACT: The point of contact for this acquisition for any questions and for submission of quotes is: Name: Jason B. Sav Title: Contract Specialist Email: jason.sav@us.af.mil | Combined Synopsis | 334515 | No Set-Aside | 10/08/2026 | 10/23/2026 | Wright Patterson AFB, OH | |
Amendment 4: Extending the due date of responses to 8 October 2026 @ 5:00 PM ET. Amendment 3: Extending the due date of responses to 1 October 2026 @ 5:00 PM ET. Amendment 2: Extending the due date of responses to 24 September 2026 @ 5:00 PM ET. Amendment 1: Extending the due date of responses to 17 September 2026 @ 5:00 PM ET. GENERAL STATEMENT: This is a combined synopsis/solicitation for a commercial item issued by the AFRL/RMZB, Wright-Patterson Air Force Base, Ohio. This announcement constitutes the only solicitation being issued for the requirement described herein. SOLICITATION INFORMATION Solicitation Number: COMBO-AFRL-RIZ-2026-0018 [X] Request for Quotation (RFQ) [ ] Request for Proposal (RFP) [ ] Invitation for Bid (IFB) REGULATION IDENTIFICATION: This solicitation and the incorporated provisions and clauses are those in effect through Revolutionary FAR Overhaul (RFO) Part 12 – Acquisition of Commercial Products and Services, 20 April 2026. NOTICE OF SMALL BUSINESS SET-ASIDE: Set-aside Type: Not Applicable NAICS Size Standard: 334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals LISTING/DESCRIPTION OF ITEMS: CLIN #: 0001 DESCRIPTION: The vendor shall provide a PXI Timing, Synchronization, and Data Acquisition System IAW Minimum Requirements Document dated 10 July 2026. QTY: 1 UNIT: EA DELIVERY INFORMATION: FOB: [X] Destination [ ] Origin Place of Delivery: 3109 Hobson Way Bldg 622 WPAFB, OH 45433 Requested Date of Delivery: As soon as possible INSTRUCTIONS TO OFFERORS: The provision at RFO 52.212-1, Instructions to Offerors – Commercial Products and Services, applies to this acquisition. Addenda: N/A EVALUATION OF OFFERS: The provision at RFO 52.212-2, Evaluation – Commercial Products and Services, will be used to evaluate quotes received. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest Price Technically Acceptable (1) Price (2) Technical Acceptability (a) In order for this quote to be considered “Technically Acceptable” it must meet all specification requirements in the Minimum Requirements Document dated 20 May 2026. The Government will use the following process to evaluate proposals if more than five (5) offers are receivied: Step 1: Proposals will be ranked by total price (lowest to highest) Step 2: Starting with the lowest priced proposal, the government will evaluate that proposal to determine if it is rated Acceptable. Step 3: If the lowest priced proposal is rated Acceptable and also conforms to the requirements of the RFQ, award will be made to that Offeror. If the lowest priced proposal ranked in Step 1, is not rated Acceptable or does not conform to the RFQ requirements, the Government will evaluate the next lowest price proposal to determined it is rated Acceptable and conforms to the RFQ requirements. If that proposal is rated Acceptable and conforms to the FOPR requirements, award will be made to that Offeror. This process will be followed until a proposal is found to be acceptable and conforms to the RFQ requirements. Once that happens, the Government will not evaluate any further proposals. Therefore, it is possible the Government will not evaluate all proposals submitted for technical acceptability. Offerors shall assume that the Government has no prior knowledge of its facilities, capabilities, and experience and will base the evaluation solely on the information presented in the Offeror’s proposal. The Government reserves the right to award all, some, or none, of the items listed in this solicitation. The Government reserves the right to resolicit if results garner only one qualifying quote, if it’s determined to be in the best interests of the Government. CONTRACT TERMS & CONDITIONS: The clause at RFO 52.212-4, Terms and Conditions – Commercial Products and Services, applies to this acquisition. Addenda: N/A REQUIRED PROVISIONS: In accordance with RFO 12.205(a)(3) and R-DFARS 212.205 Table 212.2, the following provisions are incorporated if applicable based on the provision prescription: RFO 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions RFO 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation RFO 52.204-7 System for Award Management—Registration RFO 52.204-7 with Alt I System for Award Management—Registration, with Alternate I RFO 52.204-90 Offeror Identification RFO 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) RFO 52.209-12 Certification Regarding Tax Matters RFO 52.219-2 Equal Low Bids RFO 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products RFO 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan RFO 52.222-90 Addressing DEI Discrimination by Federal Contractors RFO 52.223-4 Recovered Material Certification RFO 52.225-2 Buy American Certificate RFO 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate RFO 52.225-6 Trade Agreements-Certificate RFO 52.225-20 Prohibition on Conducting Restricted Business Operations in Sudan-Certification RFO 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications RFO 52.226-3 Disaster or Emergency Area Representation RFO 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation RFO 52.240-90 Security Prohibitions and Exclusions Representations and Certifications R-DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials R-DFARS 252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements R-DFARS 252.204-7024 Notice on the Use of Supplier Performance Risk System R-DFARS 252.215-7008 Only One Offer R-DFARS 252.215-7010 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data R-DFARS 252.215-7016 Notification to Offerors – Postaward Debriefings R-DFARS 252.219-7000 Advancing Small Business Growth R-DFARS 252.225-7000 Buy American – Balance of Payments Program Certificate R-DFARS 252.225-7020 Trade Agreements Certificate R-DFARS 252.225-7031 Secondary Arab Boycott of Israel R-DFARS 252.225-7035 Buy American – Free Trade Agreements – Balance of Payments Program Certificate R-DFARS 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism R-DFARS 252.225-7055 Representation Regarding Business Operations with the Maduro Regime R-DFARS 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region— Representation REQUIRED CLAUSES: In accordance with RFO 12.205(b)(2) and R-DFARS 212.205 Table 212.3, the following provisions are incorporated if applicable based on the clause prescription: RFO 52.203-3 Gratuities RFO 52.203-6 with Alt I Restrictions on Subcontractor Sales to the Government RFO 52.203-13 Contractor Code of Business Ethics and Conduct RFO 52.203-17 Contractor Employee Whistleblower Rights RFO 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements RFO 52.204-9 Personal Identity Verification of Contractor Personnel RFO 52.204-13 System for Award Management—Maintenance RFO 52.204-91 Contractor identification RFO 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment RFO 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters RFO 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations RFO 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns RFO 52.219-6 Notice of Total Small Business Set-Aside RFO 52.219-6 with Alt I Notice of Total Small Business Set-Aside, with Alternate I RFO 52.219-8 Utilization of Small Business Concerns RFO 52.219-9 Small Business Subcontracting Plan RFO 52.219-9 with Alt I Small Business Subcontracting Plan, with Alternate I RFO 52.219-9 with Alt II Small Business Subcontracting Plan, with Alternate II RFO 52.219-9 with Alt III Small Business Subcontracting Plan, with Alternate III RFO 52.219-9 with Alt IV Small Business Subcontracting Plan, with Alternate IV RFO 52.219-14 Limitations on Subcontracting RFO 52.219-16 Liquidated Damages—Subcontracting Plan RFO 52.219-33 Nonmanufacturer Rule RFO 52.222-3 Convict Labor RFO 52.222-19 Child Labor—Cooperation with Authorities and Remedies RFO 52.222-35 Equal Opportunity for Veterans RFO 52.222-35 with Alt I Equal Opportunity for Veterans, with Alternate I RFO 52.222-36 Equal Opportunity for Workers with Disabilities RFO 52.222-36 with Alt I Equal Opportunity for Workers with Disabilities, with Alternate I RFO 52.222-37 Employment Reports on Veterans RFO 52.222-40 Notification of Employee Rights Under the National Labor Relations Act RFO 52.222-50 Combating Trafficking in Persons RFO 52.222-50 with Alt Combating Trafficking in Persons, with its Alternate I RFO 52.222-54 Employment Eligibility Verification RFO 52.222-62 Paid Sick Leave Under Executive Order 13706 RFO 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items RFO 52.223-9 with Alt I Estimate of Percentage of Recovered Material Content for EPA-Designated Items, with Alternate I RFO 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons RFO 52.223-20 Aerosols RFO 52.223-21 Foams RFO 52.223-23 Sustainable Products and Services RFO 52.224-3 Privacy Training RFO 52.224-3 with Alt I Privacy Training, with Alternate I RFO 52.225-1 Buy American-Supplies RFO 52.225-1 with Alt I Buy American-Supplies, with Alternate I RFO 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act RFO 52.225-3 with Alt II Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate II RFO 52.225-3 with Alt III Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate III RFO 52.225-3 with Alt IV Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate IV RFO 52.225-5 Trade Agreements RFO 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States RFO 52.225-26 Contractors Performing Private Security Functions Outside the United States RFO 52.226-4 Notice of Disaster or Emergency Area Set-Aside RFO 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area RFO 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving RFO 52.229-12 Tax on Certain Foreign Procurements RFO 52.232-29 Terms for Financing of Commercial Products and Commercial Services RFO 52.232-30 Installment Payments of Commercial Products and Commercial Services RFO 52.232-33 Payment by Electronic Funds Transfer—System for Award Management RFO 52.232-34 Payment by Electronic Funds Transfer—Other than System for Award Management RFO 52.232-36 Payment by Third Party RFO 52.232-40 Providing Accelerated Payments to Small Business Subcontractors RFO 52.233-3 Protest After Award RFO 52.233-4 Applicable Law for Breach of Contract Claim RFO 52.240-91 Security Prohibitions and Exclusions RFO 52.240-91 with Alt I Security Prohibitions and Exclusions, with Alternate I RFO 52.240-92 Security Requirements RFO 52.240-92 with Alt II Security Requirements with Alternate II RFO 52.240-93 Basic Safeguarding of Covered Contractor Information Systems RFO 52.244-6 Subcontracts for Commercial Products and Commercial Services RFO 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels RFO 52.247-64 with Alt I Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate I RFO 52.247-64 with Alt II Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate II R-DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials R-DFARS 252.203-7002 Requirements to Inform Employees of Whistleblower Rights R-DFARS 252.204-7020 DoD Assessment Requirements R-DFARS 252.204-7021 Cybersecurity Maturity Model Certification Requirements R-DFARS 252.204-7022 Expediting Contract Closeout R-DFARS 252.204-7023 Reporting Requirements for Contracted Services R-DFARS 252.205-7000 Provision of Information to Cooperative Agreement Holders R-DFARS 252.211-7003 Item Unique Identification and Valuation R-DFARS 252.211-7008 Use Of Government – Assigned Serial Numbers R-DFARS 252.216-7010 Postaward Debriefings for Task Orders and Delivery Orders R-DFARS 252.219-7003 Small Business Subcontracting Plan (DoD Contracts) R-DFARS 252.223-7008 Prohibition of Hexavalent Chromium R-DFARS 252.225-7001 Buy American and Balance of Payments Program R-DFARS 252.225-7012 Preference for Certain Domestic Commodities R-DFARS 252.225-7021 Trade Agreements R-DFARS 252.225-7036 Buy American - Free Trade Agreements - Balance of Payments Program R-DFARS 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten R-DFARS 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime R-DFARS 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region R-DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns R-DFARS 252.227-7015 Technical Data – commercial Products and Commercial Services R-DFARS 252.227-7037 Validation of Restrictive Markings on Technical Data R-DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports R-DFARS 252.232-7006 Wide Area Workflow Payment Instructions R-DFARS 252.232-7010 Levies on Contract Payments R-DFARS 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel R-DFARS 252.237-7019 Training for Contractor Personnel Interacting with Detainees R-DFARS 252.243-7002 Requests for Equitable Adjustment R-DFARS 252.244-7000 Subcontracts for Commercial Products and Commercial Services R-DFARS 252.247-7023 Transportation of Supplies by Sea R-DFARS 252.247-7028 Application for U.S. Government Shipping Documentation/Instructions ADDITIONAL CLAUSES: Refer to R-DFARS 212.205-70 Table 212.4 for a list of clauses to be included in specified categories of contracts for commercial products and commercial services. Applicable clauses will be included in the contract. ADDITIONAL CONTRACT REQUIREMENTS: Offeror shall include all warranty requirements and documentation with quote. Offerors shall identify how long the quote is valid. DPAS APPLICABILITY: This requirement is not applicable to the Defense Priorities and Allocations System (DPAS). SOLICITATION CLOSING INFORMATION: Quotes are due by: 8 October 2026 @ 5:00 PM ET. Quotes must be received by the closing date stated above. Submit quotes by email. POINT OF CONTACT: The point of contact for this acquisition for any questions and for submission of quotes is: Name: Jason B. Sav Title: Contract Specialist Email: jason.sav@us.af.mil | Combined Synopsis | 334515 | No Set-Aside | 10/01/2026 | 10/08/2026 | Wright Patterson AFB, OH |
Additional Details
Solicitation Number
FA8601_EBIC_SYSTEM
Archive Date
Oct 9, 2026
Office Address
WRIGHT PATTERSON AFB, OH, 45433-5344