UAV Netting Enclosure For ANT Center

AMMENDMENT 0002

The changes are as follows: 

Request for Quote (RFQ) / Solicitation Number: FA8601-26-Q-0103 0002

Quotes Due: 4 SEP 2026 at 12:00 PM EST

*Updated SOW* Updates are highlighted red, see attached- Statement of Work_UAV Netting _ 25 Aug revision

AMMENDMENT 0001

The canges are as follows: 

Request for Quote (RFQ) / Solicitation Number: FA8601-26-Q-0103 0001

Quotes Due: 27 AUGUST 2026 at 12:00 PM EST

See attached: Questions & Answers, Revised Solicitation, Revised Statement of Work, Wage Determination and Pictures

***NOTE: The Government is recommending that all bidding vendors attend a site visit for FRIDAY, AUGUST 14TH  2026 at 1:00PM EST at the following address:

2950 Hobson Way

Area B Bldg 642

WPAFB, OH45433-77655

To obtain access to the installation vendors will need to acquire a visitor’s pass. Attendees must register in advance by emailing Kristin Cramer at tracy.ferrise@us.af.mil and Brianna Williams at brianna.williams.13.ctr@us.af.mil, no later than 1:00 p.m. EST on Monday August 10th 2026 with the following information:

1. 1. Visitor’s full name and cell phone number
   2. Preferred email address
   3. Driver’s license number and state of issuance

The vendor will be required to pick-up their visitor’s pass at Pass and Registration located in Area A, Bldg 286, 4185 Logistics Ave, Dayton, OH 45433.  Once base access has been granted, please proceed to the Wrigth Patterson Medical Center.

4. Request for Information (RFIs):
The Government will accept questions concerning this solicitation until 21 AUGUST 2026 at 12:00 PM EST.

List of Attachments:

1. Solicitation
2. Statement of Work
3. Pictures
4. Wage Determination (Construction)

-------End----

Combined Synopsis/Solicitation

AFLCMC/PZI Installation Contracting Support

Wright Patterson AFB, OH 45433

Date: 23 July 2026

Title: UAV Netting Enclosure for ANT Center

Request for Quote (RFQ) / Solicitation Number: FA8601-26-Q-0103

Quotes Due: 13 AUGUST 2026 at 12:00 PM EST

Contact Point(s): TSgt Adam Holden, Contract Specialist; adam.holden.1@us.af.mil

Contact Point(s): Jessica Stamper, Contracting Officer; jessica.stamper.2@us.af.mil

Description: This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with RFO Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.

Solicitation number FA8601-26-Q-0103 is issued as a Request for Quotation (RFQ) for UAV Netting Enclosure for ANT Center at Wright Patterson Air Force Base as described under the requirements section of this combined synopsis/solicitation and accompanying requirements attachment.

This acquisition is set-aside for small business concerns under NAICS code 238990 –All Other Specialty Trade Contractors with a small business size of $19.0M. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

The Government reserves the right to conduct interchanges with some, none, or all offerors, or make no award at all depending upon: An award, if any, will be made LPTA. Ie, to the lowest priced Offeror who submits a proposal that:

1. Conforms to the requirements of the combined synopsis/solicitation.
2. Receives a rating of “Acceptable” on the Technical Capability evaluation factor.
3. Contains the lowest evaluated price (TEP), provided that the TEP is not unbalanced and is fair and reasonable.

The Government also reserves the right to cancel this solicitation, either before or after the closing date.

1. Requirement:

This requirement is for UAV Netting Enclosure for ANT Center at Wright Patterson Air Force Base in accordance with the Statement of Work (SOW).

2. Period of Performance:

No later than 90 Days ARO.

3. Provisions and Clauses:

See solicitation attachment for applicable provisions and clauses that apply to this acquisition. Offerors shall complete and include in quotations all representations and certifications, as well as all fill-in provisions and clauses, contained within this solicitation. Additionally, quotations that contain pricing only with no description/detail of the equipment that will be provided will not be accepted or considered for award. NOTE: In accordance with deviation R-DFARS 252.204-7998(g), the offeror's quote submission legally binds and certifies that its SAM registration is current, complete, accurate, and has been updated within the preceding 12 months as of the offer's date.

**NOTE** Mandatory Cybersecurity Maturity Model Certification (CMMC) Level 1 Assessment:

In accordance with DFARS 252.204-7021 and DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors.  To be eligible for contract award, offerors must demonstrate full compliance with the 15 basic safeguarding requirements outlined in FAR 52.240.93.

The contractor is responsible for entering the assessment results into the Procurement Integrated Enterprise Environment (PIEE), specifically within the Supplier Performance Risk System (SPRS) module. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record.

4. Request for Information (RFIs):
The Government will accept questions concerning this solicitation until 10 AUGUST 2026 at 12:00 PM EST. Email your questions on a .pdf, .doc, .docx, .xls or .xlsx document to adam.holden.1@us.af.mil and jessica.stamper.2@us.af.mil. Any questions received after this date and time may not be considered.

5. Quotes Due Date:

Quotes must be submitted electronically to the Contract Specialist via e-mail at adam.holden.1@us.af.mil and Contracting Officer at jessica.stamper.2@us.af.mil. Quotes must include all applicable shipping costs to include insurance. Quotes must conform to the requirements of this solicitation and be received no later than 13 AUGUST 2026 at 12:00 PM EST. It is the responsibility of the offeror to ensure that the quote and its attachments are received. Any correspondence sent via e-mail must contain the subject line “FA8601-26-Q-0103 – UAV Netting Enclosure for ANT Center” The entire quotation must be contained in a single e-mail that does not exceed 5 megabytes including attachments, if any.  E-mails with compressed files are not permitted.  Note that e-mail filters at Wright-Patterson Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files).  Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson.  If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent.  The email filter may delete any other form of attachments. If a DoDSafe drop off is needed, please notify the contract specialist or contracting officer at least 48 hours before quotes are due. Any quotes received after designated closing date and time need not be considered. Quotes must include aggregate total of base plus all option year CLINS, if requested (IAW RFO 52.217-5 Evaluation of Options). All quotes shall be in whole dollars and conform to the Contract Line-Item Number (CLIN) structure of attached solicitation.

6. Notice to Vendor(s):

All vendors must fully complete and return the 'Required Information Sheet' (attached to the solicitation) and return with their quotation. Additionally, quotations that contain pricing only with no description/detail of the supply/service that will be provided will not be accepted or considered for award.

7. Tariffs:

In accordance with R-DFARS 252.225-7013, the contractor is prohibited from including any amount for customs duties on eligible items within the quote price. The claim for duty-free entry is restricted to supplies destined for government use, either as end items or as components thereof. The Government will provide assistance in the process of obtaining duty-free entry.

8. Period of Acceptance of Quotes:

Offeror agrees to hold prices in its quote firm for 60 calendar days from the date specified for receipt of offers.

9. SAM Registration:

Firms submitting a quote for the solicitation described herein, MUST be registered in the System for Award Management (SAM) database, or risk the quote as being non-responsive, regardless of the package being considered complete, timely or any other salient consideration. Information to register on SAM can be found at the web site, SAM.gov.

10. Mandatory Cybersecurity Maturity Model Certification (CMMC) Level 1 Assessment:

In accordance with DFARS 252.204-7021 and DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors.  To be eligible for contract award, offerors must demonstrate full compliance with the 15 basic safeguarding requirements outlined in FAR 52.240.93.

The contractor is responsible for entering the assessment results into the Procurement Integrated Enterprise Environment (PIEE), specifically within the Supplier Performance Risk System (SPRS) module. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record.

List of Attachments:

1. Solicitation
2. Statement of Work
3. CLIN Structure

REQUIRED INFORMATION SHEET:

(All vendors must complete and return this sheet with quote submission.)

Shipping/transportation will be FOB: Destination

Manufacturers End Product Country of Origin (Supplies Only):______________________

Pricing Quoted: ____________________________

Payment Terms: ________________________   Delivery Date: ________________________

Company Name (as registered in SAM): ___________________________________________

Company Location: ____________________________________________________________

UEI: _____________________________ CAGE: ____________________________________

POC: _________________________________ Telephone: _____________________________

E-Mail: ________________________________

Warranty Information: _________________________________________________________