Notice of Intent to Award Sole Source - Technical Data Package (TDP) for the F404-GE-103 Engine
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EST
- Posted
- October 20, 2026
- Notice type
- Presolicitation
- Set-aside
- No Set aside used
- NAICS
- 336412: Aircraft Engine and Engine Parts Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.PROPULSION.FA8626 AFLCMC LPAK
- Place of performance
- Dayton, Ohio
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA8626-27-R-B002PSN
- Notice ID
- 3cc280dabf644ec1843c5c3002308533
Description
In accordance with RFO 5.101(d), this notice is hereby provided that the Propulsion Office, F404 Branch under Air Force Life Cycle Management Center (AFLCMC/LPA) intends to negotiate and award one (1) contract, on a sole source basis, to General Electric Aerospace (GEA) for the procurement of a Technical Data Package (TDP) for the F404-GE-103 engine to meet T-7A Red Hawk Advanced Pilot Training program requirements. Market research was previously conducted, and it has been determined that this is a sole source requirement pursuant to the authority of 10 U.S.C. 3204(a)(1) ) as implemented by RFO 6.103-1. GEA is the original equipment manufacturer (OEM) for the engine, and as such, is the only firm that possesses the necessary knowledge, experience, and technical data required to procure the TDP.
THIS NOTICE IS NOT A REQUEST FOR PROPOSAL. No solicitation is available.
The anticipated award date is 14 January 2027.
The National American Industry Classification System (NAICS) code for this procurement is 336412.
The point of contact for this action is AFLCMC/LPA, 2450 D. Street, Building 20, Wright-Patterson AFB OH 45433-7017, Attn: Michael Hay (michael.hay.5@us.af.mil). Any technical questions should be referred to Chris Waggoner (christopher.waggoner.1@us.af.mil). The Contracting Officer for the award is Michael Hay (michael.hay.5@us.af.mil).
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Sources SoughtArchived
Technical Data Package (TDP) for the F404-GE-103 engine
- 4Version 4PresolicitationCurrent
Type changed from Sources Sought to Presolicitation
Notice of Intent to Award Sole Source - Technical Data Package (TDP) for the F404-GE-103 Engine
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Title: Propulsion Industry Day: Fighter Engine Re-competition (F100 & F110) Department/Agency: DEPT OF WAR Sub-tier: DEPT OF THE AIR FORCE Major Command: AIR FORCE MATERIEL COMMAND Sub Command: AIR FORCE LIFE CYCLE MANAGEMENT CENTER (AFLCMC) Office DODAAC: FA8626 AFLCMC WN/LP Description: Air Force Propulsion Industry Day Special Notice Audience: Defense Propulsion Industry Partners 28 October Update:The following documents have been updated to a version 2 and are attached: 1) Air Force Propulsion Industry Day Announcement_V2 2) Industry_Day_Registration_Form_V2 Changes made to the documents include corrections to the title to specify that this Industry Day announcement is for the F100 & F110 Fighter Engine Re-competition, to remove references to advanced propulsion, and to correct an error in the instructions which specified "up to two (2) designated attendees", which was in conflict with the attendance limitation of five (5). In addition, a blank template is being added to the attachments for the Controlled Unclassified Information (CUI) Non-Disclosure Agreement for this Industry Day Fighter Engine Re-competition Event. Lastly, please note a valid, approved DD Form 2345 must be provided for each specific CAGE Code and physical location to which your attending personnel are assigned. Also, a Facility Clearance Letter (FCL) cannot substitute for an active DD Form 2345. 09 November Update: The following documents have been added to the posting and are attached: 1) Industry_Day_Advance_Discussion_Topics 2.) Welcome Packet_Final The Welcome Packet details event logistics, agenda, and check-in procedures. The Advance Discussion Topics document outlines areas of interest for one-on-one sessions; no formal written responses or presentations are required. In addition, prospective participants are directed to review the formal advisory notice below regarding the use of non-government support contractors during the event. USE OF NON-GOVERNMENT ADVISORS AND TECHNICAL SUPPORT CONTRACTORS Prospective participants are advised that the Government utilizes Non-Government Advisors—including Research, Development, Test, and Evaluation (RDT&E) technical support contractors under the Defense Technical Information Center (DTIC) Information Analysis Center (IAC) program and/or Advisory and Assistance Services (A&AS) personnel—to provide scientific, technical, and programmatic expertise in support of the Fighter Engine Competition. Personnel from the following contractor organization(s) may be present during the Industry Day general briefing and subsequent one-on-one sessions, and may have access to briefing materials, white papers, or proprietary information presented during these exchanges: Huntington Ingalls Industries, 2310 National Road, Fairborn, OH 45324 All participating support contractor personnel have executed Non-Disclosure Agreements (NDAs) with the Government and are subject to strict Organizational Conflict of Interest (OCI) mitigation plans in accordance with RFO Subpart 9.5 and R-DFARS Subpart 209.5. These contractors are strictly prohibited from unauthorized disclosure of proprietary data and are barred from competing as a prime contractor or subcontractor on any resulting solicitation for this requirement. For those companies that requested a one-on-one session at Industry Day, the participating vendor acknowledges and explicitly consents to the attendance of the aforementioned support contractor personnel and their review of any materials presented. If a vendor objects to the presence of non-government support contractors during their one-on-one session, the vendor must notify the Procuring Contracting Officer (PCO) in writing to laura.burnette@us.af.mil as soon as possible, but no later than 12PM (EST), 6 Nov 2026. The USG requests the vendor provide a Corporate Non-Disclosure Agreement (cNDA) with your objection. | 81% | Special Notice | 11/02/2026 |
The US Air Force Life Cycle Management Center (AFLCMC) F100 Program intends to issue a sole source “C”-type contract (named F100 Engine Exchange) to Pratt & Whitney (P&W), a Division of RTX Corporation for a “no-cost” exchange of property whereby the Government will deliver 51 F100-PW-220 engines to the Contractor, in exchange for the Contractor delivering 13 F100-229 new engine augmentor modules to the Government. A Sources Sought Synopsis (SSS) FA8124-RFI-AUG-2026 was posted from 4 August 2026 through 3 September 2026. Results from the SSS did not indicate any source other than P&W could perform the work under this contract at the prime level without the government incurring unacceptable delays and substantial duplication of costs not recoverable through competition. The government is awarding this contract under the authority of RFO 6.103-1,"Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." A Justification and Approval (J&A) for using Other Than Full and Open Competition was approved on 23 October 2026. All responsible sources may submit a capability statement to the Contracting Officer by the date listed in this notice to be considered by the agency. Respondents shall specify status as a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, economically disadvantaged women-owned small business, HUBZone small business, veteran-owned small business, or service-disabled veteran-owned small business. This synopsis does not constitute an Invitation for Bids (IFB) or a Request for Proposals (RFP), nor does it restrict the Government to an ultimate acquisition approach. The government will not reimburse any costs associated with preparing or submitting a response to this notice. Due to security access requirements, foreign participation is not permitted at the prime contractor level. Contracting Activity: AFLCMC/LPK, 3001 Staff Dr, Tinker AFB, OK 73145. | 76% | Pre-Solicitation | 11/17/2026 |
Naval Air Systems Command (NAVAIR), on behalf of the Tactical Airlift Program Office (PMA-207), is conducting market research to identify responsible and qualified sources capable of furnishing PT6A-60A turboprop engines in either new production condition or overhauled condition meeting original equipment manufacturer (OEM) specifications and all applicable airworthiness, configuration-control, inspection, test, preservation, and technical-data requirements. The Government is seeking information from qualified vendors to include the OEM, OEM-authorized distributors, OEM-authorized maintenance, repair, and overhaul (MRO) providers, and other responsible sources capable of supplying PT6A-60A engines for military aviation application. The Government seeks to identify potential business sources with the resources, capabilities, and experience necessary for the procurement of a PT6A-60A turboprop engine; and to obtain estimated procurement costs. Requested Industry Information: Interested sources are requested to submit a capabilities statement addressing the following: 1. Company Information Company name, address, CAGE code, UEI, and business-size status; Primary point of contact, telephone number, and email address; Identification of the respondent as OEM, authorized distributor, authorized MRO provider, or other source. 2. Technical Capability Demonstrated experience supplying new or overhauled PT6A-60A engines; Evidence of OEM authorization, distributorship, repair-station authorization, or other relevant qualification; Description of facilities, quality-management system, test-cell capability, and technical personnel; Description of the respondent’s configuration-control and parts-traceability processes; Ability to provide required engine records, airworthiness documentation, and certification documentation; Description of warranty terms and post-delivery technical support. 3.Schedule and Capacity Estimated lead time for new production engines; Estimated lead time for overhauled engines; Current and projected production/overhaul capacity; Identification of supply-chain risks, long-lead components, or other schedule constraints. 4. Commerciality and Pricing Information Whether the offered engine is customarily used by the general public or nongovernmental entities for purposes other than governmental purposes; Whether the item is sold competitively in substantial quantities in the commercial marketplace; Rough-order-of-magnitude pricing or commercial catalog/pricelist information, if available; Separate estimated pricing for new production and overhauled engines, if applicable; Recommended contract type, ordering approach, and warranty structure. 5. Small Business Participation Identification of any small-business teaming, subcontracting, distribution, overhaul, logistics, or sustainment capabilities relevant to this requirement; Recommendations for structuring a future acquisition to maximize competition and small-business participation, where practicable. Response Instructions: Responses should be submitted electronically in PDF format no later than 12:00 p.m. on Wednesday, November 18, 2026, to: Katelyn Campbell katelyn.e.campbell4.civ@us.navy.mil The email subject line shall read: "Sources Sought Response – PT6A-60A Turboprop Engine – [Company Name]" Respondents should clearly identify any proprietary information. The Government will use submitted information only for market-research and acquisition-planning purposes, consistent with applicable handling requirements. Disclaimer: This sources sought notice is for informational and planning purposes only. It shall not be construed as a solicitation, request for quote, request for proposal, obligation, or commitment by the Government to procure any supplies or services. The Government reserves the right to revise or discontinue this effort at any time. | 67% | Market Research | 11/18/2026 |
Solicitation Amendment 03: The purpose of the amendment is to update CLIN 0011 (POST AWARD CONFERENCE) from NSP to FFP, establish it as the minimum order for the contract, and attach pricing matrix. Solicitation Amendment 02: The purpose of the amendment is to attach an updated Statement of Work (SOW) and update the CLIN structure for solicitation FA8122-26-R-0007. Solicitation Amendment 01: The purpose of the amendment is to correct National Stock Number (NSN) associated with LPT Stage I Blade subCLINs 0001AB – 4001AB (USAF) and 0002AB – 4002AB (Navy) and add Inspection/Acceptance and Quality Assurance information to subCLINs 0001AB – 4001AB (USAF). Solicitation Noun: F108 Module 13/15 & 14 LPT Assembly (USAF/USN) Remanufacture NSN: 2840-01-229-5786PN (13/15 USAF); 2840-01-484-3913PN (13/15 USN); 2840-01-189-2941PN (14 USAF); 2840-01-483-8785PN (14 USN) P/N: 305-482-301-0 (13/15 USAF); 305-482-301-0 (13/15 USN); 301-316-158- 0 (14 USAF); 301-316-158-0 (14 USN) This is a competitive acquisition to qualified sources. Please see attached. Mod 14 (USAF/USN): No. 4 Bearing is included in remanufacture. Two additional subCLINs have been added for Shaft and Stub Shaft replacement. Mod 13/15 (USAF/USN): SubCLIN has been added for Stage I Blades. 105 blades will be paid for each USAF module and 141 blades for each USN module. | 66% | Solicitation | 09/15/2026 |
NSN: 2840-01-625-7346NZ NOUN: SEAL, METALLIC, AIRCR TOP DRAWING: 4088961 EDL REVISION & DATE: 2 / 10 APR 2026 MDC CODE: WCF IM NAME: LOVELACE, BRENT S | 66% | Special Notice | 08/19/2027 |
Additional Details
Solicitation Number
FA8626-27-R-B002PSN
Archive Date
Nov 19, 2026
Office Address
WRIGHT PATTERSON AFB, OH, 45433-7017