GovChime
Notice ID: fb5e4caa974540f796153fd5f5c39763Special Notice

RFI: Draft MIL-DTL for Militarized USB-C (USB-CM) - Feedback Request

Responses closed . Full description on SAM.gov.

Overview

Response deadline
7:00 PM EST
Posted
October 7, 2026
Notice type
Special Notice
NAICS
334417: Electronic Connector Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG NATICK
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
None assigned
Notice ID
fb5e4caa974540f796153fd5f5c39763

Description

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY.  This is not a Request for Quotation (RFQ), Request for Proposal (RFP) or an Invitation for Bid (IFB).  

The Program Manager – Protection and Integration (PM-PI) is seeking feedback on draft #2 of Military Detail document aka MIL-DTL for a new design for military connections.  This draft incorporated comments from draft #1 and is subject to change based on relevant feedback and other developmental milestones of the program. 

Militarized USB-C aka “USB-CM” is an environmentally hardened connection built to survive military environments.  The connector supports power and data requirements and supports USB standards unless specifically stated otherwise.  This government owned design is intended to provide a standard interface for military equipment and is not proprietary.  USB-CM is intended to provide a reliable and ruggedized standard connector for users across the Department of War in their deployed terrestrial, maritime: surface and sub-surface, air, and space operational environment(s).  

PM-PI is looking for public feedback on the second draft of MIL-DTL document including, but not limited to: USB-CM connector design, manufacturability, ability to integrate into vendor products, cost considerations, any perceived limitations of use, durability and corrosion resistance, materials, etc.  It is encouraged that comments include tradeoffs in metrics, such as cost/data/design/testing as it relates to data rate and power levels. 

This is a refined second draft incorporating previous feedback.  Please send all further comments to USB-CMilitary@army.mil.  MS word or PDF is the preferred format. 

The draft MIL-DTL including design and detailed performance characteristics, can be found in the Attachments section of this posting.   

This Request for Information is associated with:
RFI: Feedback on Draft MIL-DTL for Militarized USB-C (USB-CM) Connections dated 13 April 2026

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • MIL-DTL-32812 DRAFT2.1 7Oct2026_Release.pdf

    1.8 MBAdded in Special Notice version 4Posted
    Download
  • MIL-DTL-32812 DRAFT2 30Sept2026_Release.pdf

    1.8 MBAdded in Special Notice version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Special Notice

    RFI: Draft MIL-DTL for Militarized USB-C (USB-CM) - Feedback Request

    Notice 05a44b382ba24fc493c190086e6f0672 on SAM.gov

  2. 2
    Version 2Special Notice

    RFI: Draft MIL-DTL for Militarized USB-C (USB-CM) - Feedback Request

    Notice 4202346c39ea4eefbf32929aae9dad1e on SAM.gov

  3. 3
    Version 3Special Notice

    RFI: Draft MIL-DTL for Militarized USB-C (USB-CM) - Feedback Request

    Notice 3df79eb032094087a6e1cce8a0debdc5 on SAM.gov

  4. 4
    Version 4Special NoticeCurrent

    RFI: Draft MIL-DTL for Militarized USB-C (USB-CM) - Feedback Request

    Notice fb5e4caa974540f796153fd5f5c39763 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
USB-C to 12-PIN ODU cables 0001: Reason for amendment is to change the quantity from 490 to 620.0002: Reason for amendment is to remove the salient characteristic of Dual captive thumbscrews for secure attachment to case due to change in requirement.
63%
Combined Synopsis06/16/2026
56%
Pre-Solicitation11/16/2026
Fiber Optic Connectors
56%
Combined Synopsis08/17/2026
Please refer to the attached Solicitation and ATTACHMENT #1.
56%
Combined Synopsis06/25/2026
Reason for amendment 0001 was to update include additional items that was left off the solicitation. 8300-W1K-S Single Mode SC Hot Melt Connector with white 3mm boot Part# 8300. for 125 m fiber, 250/900 m jacketed cable features a zirconia ceramic ferrule with 0.2 dB typical loss for single mode fiber. It is specifically designed for ease of termination in local area networks. Pre-loaded with advanced re-heat able adhesive, this connector allows fiber repositioning and shows blue dot of adhesive after fiber insertion. It has no internal splice. No need for epoxy mixing. The termination time is about 2 minutes. The 8300-W1K-S hot melt connector meets TIA/EIA 568-C.3 standard for indoor and outdoor applications. WHITE boot. Sold 1 per package.002: 8100YS ST Single Mode Hot Melt Fiber Connector with Yellow 3MM Boot Part# 8100YS. For 125 m fiber features a zirconia ceramicferrulewith0.2 typical loss for single mode fiber. Specifically designed for quick, accurate and permanent field terminations in LAN intrabuilding environments. Color-coded yellow boot. Sold 1 per package.003: SC Hot Melt Connector Multimode 125 m 6300W These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiberin2minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0004: ST Hot Melt Connector Multimode 125 m 6100 These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiber in 2 minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0005: Electro-Wash MX Cleaner Degreaser is a high flash point cleaner that quickly removes soils, adhesives, and residues from insulation jackets and conductors on telecom, fiber optic and coaxial cables. Engineered with very low surface tension, this formulation penetrates and removes soils quickly with excellent wetting action, lifting and removing soils from the dirtiest areas. Electro-Wash MX Cleaner Degreaser is also ideal for removing carbonization, oxidized oils and greases from metal surface. Fiber Optic Strippers Precision Three Hole are large strip notch at the tip of the tool is used to remove1.6mm to 3.0mm jacketing. The middle strip notch is used to remove 600um to900um buffer. The smallest strip notch is used to strip the 250um coating to expose the 125umfiber cladding. The tool also has an easy-grip ergonomic handle and a closing latch to protect the stripping surface when not in use. FIS Cleaning solution 99% alcohol is 99% ACS reagent grade isopropyl is used in cleaning fiber connector end faces or prior to splicing. Miller Kevlar Cutter Scissor When cutting Kevlar, you need a cutting tool with very durable blades. You also want the tool to cut cleanly, and to fit comfortably in your hand. FIS offers Kevlar cutters that fit the bill. The Kevlar cutter, F1-KS1 (serrated), features vanadium steel serrated blades and high leverage cutting, utilizing long molded handles. Carbon Molybdenum and Vanadium Steel Blade. Ergonomic molded handles provide comfort in either hand.
56%
Combined Synopsis04/02/2026

Additional Details

Solicitation Number

Not available

Archive Date

Nov 21, 2026

Office Address

NATICK, MA, 01760-5011