Notice ID: aaf99e2e35a44e7eafa8f27612f0f1aeSpecial NoticeArchived
Notice of Intent to award Single Source - SOUNDNINE INC
Archived on September 19, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM CDT
- Posted
- August 21, 2025
- Notice type
- Special Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 334519: Other Measuring and Controlling Device Manufacturing
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Place of performance
- Annapolis, 21401
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FD-2025-525
- Notice ID
- aaf99e2e35a44e7eafa8f27612f0f1ae
Description
FD-2025-525 Soundnine Sensors ***The National Oceanic and Atmospheric Administrations (NOAA) Fisheries Office of Management and Budget Field Delegates, and the NOAA Chesapeake Bay Office, intends to negotiate, on a sole source basis, under authority of FAR 13.106-1(b)(1), with Soundnine, Inc. 11863 124th Ave. N.E., Kirkland, WA, 98034 which is used for an Interagency Agreement to establish a Bay-wide hypoxia monitoring program to attain water column dissolved oxygen data for the purposes of water quality monitoring and fish habitat assessments. ***The sole source determination is based on NOAAs requirement that Soundnine, Inc is the only vendor that is compatible in all aspects (form, fit, and function) with existing systems or equipment, and the source is uniquely qualified to meet the requirement. An initial successful pilot has led the Chesapeake Bay Program (NOAA & federal partners) to seek a second phase of testing which included evaluating hypoxia data across two SoundNine stations for an extended duration to investigate sensor durability and spatial variability within a segment of the Chesapeake Bay. That second phase was completed in the winter of 2021 and resulted in the operational deployment of the SoundNine systems in the spring of 2022. A third system has since been delivered. The systems to be procured provide for the expansion of the hypoxia monitoring network and redundancy for the operational systems, and must be 100% compatible with the actively deployed buoy and sensors. No other sensors on the market can meet this requirement The Contractor shall supply NOAA Chesapeake Bay Office with nine dissolved oxygen sensor assemblies, six replacement pressure sensors, sixty XIM-CTD-DO calibrations for all measurements, twelve replacement conductivity cells that include a calibration and four- twelve month hosted data service plans. Deliver nine (9) REP DO SEN- replacement S9 DO sensor assemblies on XIM CT/CTD, includes new PME sensor Deliver six (6) XIM PRESS REP- replacement pressure sensor on XIM CTD, includes calibration Deliver sixty (60) XIM-CTD-DO CAL- XIM-CTD-DO sensor calibration (conductivity, temperature, pressure & dissolved oxygen). DO sensor linearization at 3 points compared to the new PME sensor performed in conjunction with CT calibration. Deliver twelve (12) XIM CELL- replacement conductivity cell on XIM CTD, includes calibration Deliver four (4) CHDS12- Hosted data service with cellular telemetry, (U.S. carrier), 12 months PERIOD OF PERFORMANCE: 09/06/2026 - 09/05/2026 DELIVERY SCHEDULE: All Deliverables will be provided to NOAA Chesapeake Bay Office upon completion of service by September 05, 2026. DELIVERY LOCATION: The sensors that undergo maintenance, replacement services and calibrations will be delivered to NOAA Chesapeake Bay Office, 200 Harry S Truman Pkwy, Ste 406, Annapolis, MD 21401 during the business hours of 8AM-4PM EST, Monday-Friday. Delivery service will call the POC at least one day prior to the date of delivery to arrange for transfer. ***This notice of intent is not a request for competitive proposals, and no solicitation package is available. However, firms that believe they can fully meet the government's requirements may submit substantiating documentation in writing to the identified point of contact within 15 days after publication of this synopsis. Such documentation will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the government not to conduct a competitive procurement, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Lifecycle
- 3Version 3Special NoticeArchivedCurrent
Notice of Intent to award Single Source - SOUNDNINE INC
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Please see attached. | - | Market Research | 11/20/2026 |
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. | - | Market Research | 11/28/2026 |
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price contract on a noncompetitive basis to Peak Scientific, Inc. - 210 Littleton RD STE 110- Westford, Massachusetts 01886-3580 to provide the following service: Genius XE 35 laboratory nitrogen generator QTY 2 Peak Scientific Instruments Ltd BOTTLE-DRAIN QTY 2 This action is be undertaken in accordance with FAR 12.102 (a) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements The North American Industry Classification System (NAICS) for this requirement is 334519. The FSC code is 6640. The resulting contract will be a firm fixed price contract. Negotiation being conducted using other than full and open competition procedures pursuant to authority of 41 U.S.C 1901. This Notice of Intent is not a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by September 29, 2026, at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. The determination not to compete this proposed contract action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Responses to this electronic notice must be made by 10:00 a.m. EST on September 29, 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements, quotes, and capabilities to Shannon Wooten, via email: Shannon.cloud-wooten@navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability. | - | Special Notice | 09/29/2027 |
| - | Market Research | 12/05/2026 | |
please see attached. | - | Market Research | 12/03/2026 |
Additional Details
Solicitation Number
FD-2025-525
Archive Date
Sep 19, 2025