GovChime
Notice ID: cbd4c74d6094dc2ab102b359198eb74fCombined Synopsis/Solicitation

Enterprise Voice Services Program

Archived on September 19, 2018. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
9:00 AM UTC−05:00
Posted
August 31, 2018
Notice type
Combined Synopsis/Solicitation
Set-aside
Historically Underutilized Business (HUBZone) Set-Aside (FAR 19.13)
NAICS
541512: Computer Systems Design Services

Notice details

Place of performance
DISA HQS, Fort Meade, 20755
PSC
R: SUPPORT SVCS (PROF, ADMIN, MGMT)
Last updated
Sep 25, 2026

Identifiers

Solicitation number
HC104718R4021
Notice ID
cbd4c74d6094dc2ab102b359198eb74f

Description

The purpose for this notice is to provide clarification. In RFP Amendment 02, posted August 13, 2018, updates were made to the RFP. One of the updates was regarding Continuation of Essential Contractor Services Plan. Amendment 02 updated RFP, ADDENDUM to 52.212-1, paragraph (m)(12)(v)(5) and added: Continuation of Essential Contractor Services Plan. Additionally, in Amendment 02, an update was made to Attachment #1 (PWS) and added- Continuation of Essential Contractor Services Plan in the Deliverables Section 11. While there is no designation in the PWS, aside from Section 11, regarding the Continuation of Essential Contractor Services Plan, this is due to the fact that the plan is a requirement per DFARS clause 252.237-7023, on RFP (page 53), which was posted on August 02, 2018. Please see referenced DFARS clause for further information regarding the Continuation of Essential Contractor Services Plan. All other terms and conditions remain the same. AMENDMENT 04: The purpose for Amendment 04 is to: 1. RFP Addendum to 52.212-1, section (m)(5) is hereby updated. The sentence "The following items will not be considered when calculating page limits: table of contents, glossary, resumes, OCCI mitigation plans, past performance references, DD254, FAR/DFARS/DARS Provisions and/or Clause contractor responses, and Section 508 Compliance" is deleted. 2. RFP Addendum to 52.212-1, section (m)(12)(v), Volume V, is hereby updated to add "7. Section 508 Accessibility Standards compliance, per PWS section 15." All other terms and conditions remain the same. AMENDMENT 03: The purpose for Amendment 03 is to: 1. RFP Addendum 52.212-1, Volume II, is hereby updated to include SCRM Plan. The page limit for this volume is increased to 35 pages total. 2. RFP Addendum 52.212-1, Volume III, is hereby updated to include the sentence, "Subcontractor past performance may be submitted by the Offeror." 3. Additional Industry Q&A, attachment 9, is included in Amendment 03. All other terms and conditions remain the same. AMENDMENT 02: The purpose for amendment 02 is to: 1. Update RFP, ADDENDUM to 52.212-1, paragraph (m)(12)(v)(5). Added: Continuation of Essential Contractor Services Plan. 2. Update RFP, ADDENDUM to 52.212-1, paragraph (m)(12)(v)(6). Added: Evidence of Final Top Secret Facility Clearance per PWS section 12.1. 3. Update RFP, ADDENDUM to 52.212-1, paragraph (m)(12)(iv). Added: Under no circumstances shall the information and documentation from the Price Volume be included elsewhere in the proposal other than Volume IV and Volume VII. 4. Update Attachment #1 (PWS). Added-Continuation of Essential Contractor Services Plan in the Deliverables, section 11 of PWS. 5. Add Attachment #8 (Industry Q&A spreadsheet). All other terms and conditions remain the same. AMENDMENT 01: The purpose for amendment 01 is to provide clarification on proposal due date. 1. The proposal due date is September 4, 2018 at 09:00 AM (EST). 2. The questions due date is August 9, 2018 at 09:00 AM (EST), RFP addendum 52.212-1, paragraph (H) is updated accordingly. 3. DD254, attachment 2, has been updated accordingly. All other terms and conditions remain the same and in full force and effect.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Vivianna Diaz
Contract Specialist

Secondary Contact

Adelis M Rodriguez
Contracting Officer

Documents

No documents available.

Lifecycle

Solicitation:HC104718R4021
  1. Combined Synopsis
  1. 6×
    Combined SynopsisCurrentAug 2, 2018

    Enterprise Voice Services Program

    Notice cbd4c74d6094dc2ab102b359198eb74f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Enterprise Inventory Management hardware and software in Perry Point, Maryland, 21902 per SOO, attached.
83%
Market Research11/12/2026
You are invited to review and comment on the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC)’s Enterprise Next (ENX) draft solicitation. The principal purpose of this requirement is to provide enterprise-level development, sustaining engineering, and operations for NASA’s Science Data Archives managed by GSFC. The contractor will coordinate and integrate activities with Data Archive Projects, other science data centers, science investigator teams, user communities, other contractors, and Science Mission Directorate (SMD) organizations. The overarching goal is to continuously improve system performance, scalability, and reliability while reducing operational and maintenance costs by modernizing capabilities and retiring legacy services. NASA will conduct this acquisition as a full and open competition. This competitive acquisition will result in a Hybrid Indefinite Delivery Indefinite Quantity (IDIQ) with the ability to issue Cost-Plus-Fixed-Fee (CPFF) or Firm-Fixed Price (FFP) task orders. The contract will have an effective ordering period of 5 years from the contract effective date. The North American Industry Classification System (NAICS) code for this acquisition is 541512 and the small business size standard is $34M dollars. Potential offerors are encouraged to comment on all aspects of the draft solicitation, including the requirements, schedules, proposal instructions, and evaluation approaches, any perceived safety, occupational health, security (including information technology security), environmental, export control, and/or other programmatic risk issues associated with performance of the work. Potential offerors should ensure their company is listed in the online database(s) for the following: System for award management: https://www.sam.gov U.S. Department of Labor Veterans’ Employment and Training Service, VETS-4212 Reports: https://vets4212.dol.gov/vets4212/ US Government’s unique entity identifier (UEI): https://www.gsa.gov/about-us/organization/federal-acquisition-service/technology-transformation-services/integrated-award-environment-iae/iae-systems-information-kit/unique-entity-identifier-update The current planned release date for the Final Request for Proposal (RFP) is currently anticipated to be January 2027, with proposals being due approximately 30 days later. The anticipated contract award date is June 2027, with a August 2027 contract effective date. The contract will be performed onsite at NASA GSFC and offsite at the Contractor’s facilities. The following additional information is provided to assist in understanding this acquisition: A Phase-in period will be conducted. The phase in period will be 45 days and established via a FFP task order off the awarded contract. The Government will make available existing Installation-Accountable Government Property (IAGP) for onsite contract performance and Government Furnished Property (GFP) for offsite use at the Contractor’s facility as described in the DRFP. NASA has determined that this acquisition may give rise to a potential organizational conflict of interest (OCI). Offerors should refer to NFS clause 1852.209-72 Access to Sensitive Information for information on the OCI plan as a contract compliance document. Super Intelligence (SI) Use Transparency Disclosure: The planned use of the SI system being acquired does include high-impact use cases, as defined in OMB M-25-21, Accelerating Federal Use of AI through Innovation, Governance, and Public Trust, or there is a reasonable likelihood for such a high-impact use case to occur during the life of the contract. The documentation required and other requirements to enable NASA to complete the required SI Impact Assessment is included in the Data Requirement Deliverable (DRD 4). Proposals for this solicitation are required to be submitted through NASA’s Enterprise File Sharing and Sync Box (EFSS Box), a FedRAMP Moderate certified platform. Potential offerors, especially those that have not previously submitted a proposal utilizing NASA’s EFSS Box, are encouraged to review the solicitation instruction entitled “Electronic Proposal Delivery - Proposal Marking and Delivery Through NASA’s EFSS Box” which provides instructions related to the submission of proposal via EFSS Box. Offerors are encouraged to check with their corporate IT staff to determine if there are firewall restrictions that need to be addressed prior to the submission of proposal files through NASA’s EFSS Box. To control and protect sensitive data owned by the Government and its Contractors, NASA policy requires all acquisition-related documents be released in Adobe Portable Document Format (PDF). Documents related to this acquisition, including this letter, the solicitation, attachments, exhibits, any amendments, and links to online reference/technical/bidders’ library will be attainable electronically through the Government-wide point of entry website at www.SAM.gov. Potential Offerors are requested to periodically monitor the websites for updates. NFS 1852.215-84, OMBUDSMAN, is applicable. The Ombudsman for this acquisition is Eric Newman, eric.j.newman@nasa.gov, 24 313-8320. https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf. This DRFP is not a solicitation, and NASA is not requesting proposals. This DRFP does not commit NASA GSFC to pay any proposal preparation costs, nor does it obligate NASA GSFC to procure or contract for this requirement. This request is not an authorization to proceed and does not authorize payment for any charges incurred by the offeror for performing any of the work called for in this solicitation. Any comments regarding the DRFP should be submitted electronically in writing, to Andres Castro, Contracting Officer, at andres.c.castro@nasa.gov, within 14 calendar days after the release of this DRFP. If a respondent believes their comments contain confidential, proprietary, competition sensitive, or business information, those questions/comments shall be marked appropriately. However, questions that are marked as containing confidential, proprietary, competition sensitive or business information will not be provided with a Government response. The Government will consider all comments received in preparation for the Final RFP. To the extent a comment leads the Government to revise the acquisition approach or requirements, the change will be reflected in the Final RFP. Some DRFP questions and comments may receive a posted response to the GPE if the Contracting Officer determines that a response would facilitate additional understanding of the solicitation. The Government may also respond via the GPE to comments and/or questions received following the issuance of the Final Request for Proposal (RFP).
75%
Solicitation11/13/2026
This notice pertains to Request for Information RFI/Sources Sought Notice 36C10B26Q0245 that was posted to SAM.gov for Enterprise Digital Government Enablement (EDGE). The current acquisition strategy will be to solicit as Fair Opportunity utilizing the Alliant 3, Government Wide Acquisition Contract, though subject to change. This procurement will be awarded as a multiple award Blanket Purchase Agreement. While the Government intends to make three (3) BPA awards, it reserves the right to make additional awards or fewer awards, if doing so is deemed to be in the best interest of the Government. The estimated release is anticipated for December 2026, though subject to change. ***Responses to this notice are not required***
62%
Market Research10/29/2026
United States Census Bureau (USCB) Enterprise RFID Technology, Installation, and Azure WIMS Integration REQUEST FOR INFORMATION (RFI) This RFI is solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Further, the USCB is at the early stages of market research and is not, at this time, seeking proposals and will not accept unsolicited proposals. Interested parties are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. 1.0 Purpose The U.S. Census Bureau (USCB) issues this Request for Information (RFI) for market research under Federal Acquisition Regulation (FAR) Part 10 to understand current business practices and identify industry capabilities for furnishing, installing, configuring, testing, and integrating radio frequency identification (RFID) technology with the USCB’s existing Warehouse Inventory Management System (WIMS). The USCB seeks industry input on these types of services and expertise in achieving the desired objectives in accordance with federal requirements. To date, the USCB has already developed a scalable WIMS platform using Microsoft technologies in its Microsoft Azure environment. This RFI does not seek a replacement warehouse management platform. The USCB’s primary interest is to acquire industry recommendations on RFID equipment and supporting software, facility deployment and integration services, and secure delivery of RFID event data into the existing WIMS environment. The USCB believes industry has the best knowledge of current offerings and how to plan for, acquire, and integrate evolving technology trends. Vendors are encouraged to provide recommendations and describe innovative, commercially available, and proven approaches that address the objectives detailed within this RFI without being constrained by a prescriptive equipment design or configuration. 2.0 Background and Operational Environment The USCB manages survey forms, printing and mailing materials, shipping supplies, and other inventory supporting demographic, economic, and decennial programs, including preparations for 2030 Census tests. Inventory is received, stored, moved, issued, transferred, and shipped through multiple facilities. Automated identification and transaction capture can reduce manual inventory handling and improve the accuracy and timeliness of enterprise inventory records. Potential locations include National Processing Center operations in Charlestown, Indiana; Census Bureau Headquarters in Suitland, Maryland; a warehouse in Franconia, Virginia; Regional Offices; and other Government-designated facilities. Actual locations, installation scope, sequencing, and site access would be determined by the Government. These locations may have different layouts, physical security restrictions, network conditions, and operating requirements. 3.0 Objectives and Mission-Critical Capability Areas The USCB intends to leverage industry knowledge, feedback, recommendations, and expertise on proven approaches and best practices that achieve the objectives listed below. 3.1 RFID identification and multi-level tracking The USCB is interested in tracking at the item or box, pallet, and rack or storage-location levels. Industry recommendations may include passive or active RFID, hybrid approaches, or complementary identification methods where appropriate. Recommended solutions should support reliable identification and location/movement events during receiving, putaway, internal transfers, picking, shipping, cycle counting, and reconciliation. Input is requested to address read accuracy, interference, duplicate or missed events, and the practical limits of location precision. 3.2 Equipment provision, site assessment, and installation The contemplated effort includes facility assessments; design and equipment selection; provision of tags, readers, antennas, handheld or mobile equipment, portals, and supporting components as appropriate; physical installation and configuration; and operational testing. Respondents shall provide input into the considerations made in regards to site dependencies, secured-space work practices, commissioning, warranties, support, and expansion to additional facilities, as directed. 3.3 Secure integration with existing Microsoft Azure WIMS The RFID solution must exchange usable, timely data with the existing Government WIMS rather than create a competing inventory system of record. Respondents are requested to recommend integration of reader and edge-device feeds with Azure-hosted WIMS through appropriate secure interfaces, APIs, messaging, middleware, or other standards-based methods. Anticipated work may include event filtering, data mapping to Government inventory identifiers and locations, interface development, custom fields or components as needed, error handling, testing, documentation, and knowledge transfer. Specific Azure services and interface specifications will be coordinated with the Government during subsequent planning. 3.4 Security, reliability, and sustainment The USCB seeks recommended approaches and solutions suitable for controlled federal facilities and integration with its existing authorized cloud boundary, subject to applicable security review and approval. Respondents are requested to provide information which describes secure communications, device administration, access control, logging, resilience during network interruptions, patching, lifecycle support, and long-term costs. The USCB seeks recommended approaches which permit Government operation and sustainment without unnecessary vendor lock-in. 4.0 Industry Response and Feedback Questions A. RFID technology and operational performance 1. Describe your recommended technology and architecture for identifying and tracking individual items or boxes, pallets, and racks or storage locations in multiple warehouse facilities. Explain any recommended RFID or hybrid approaches. 2. Identify the major hardware and software components your recommended approach would provide, including tags, fixed or mobile readers, antennas, portals, edge components, and management tools. Distinguish commercial products from custom components. 3. How would your solution capture receiving, putaway, internal movement, picking, shipping, transfers, and cycle-count events, and associate them with the correct inventory identifiers and locations? 4. What read accuracy and location precision can realistically be achieved, and how do you address dense racks, metal, packaging, interference, missed reads, and duplicate events? 5. What mobile, handheld, exception-resolution, and offline or intermittent-connectivity capabilities are available for warehouse operators? B. Facility assessment, installation, and rollout 6. Describe your approach to surveying facilities, developing a site-specific equipment design, and determining reader, antenna, portal, and network placement. 7. Describe your ability to furnish, install, configure, and commission equipment in secured Government spaces at Charlestown, IN; Suitland, MD; Franconia, VA; Regional Offices; and other locations as directed. Identify subcontractor dependencies. 8. What facility, electrical, networking, physical security, access, and Government-furnished resources would typically be needed for installation and operation? 9. Identify a phased pilot-to-enterprise deployment approach, including indicative schedule, testing and acceptance criteria, and the approach for minimizing disruption to ongoing warehouse operations. C. Existing WIMS and Azure integration 10. Describe how RFID data would be securely transmitted, processed, and integrated into an existing Microsoft Azure-hosted WIMS, without replacing the Government’s inventory platform. 11. What integration interfaces and patterns are available (such as APIs, webhooks, message queues, middleware, or edge processing), and how would your recommended approach accommodate Government-defined data schemas and custom fields? 12. How would your recommended solution convert raw RFID reads into reliable inventory events, manage duplicates and errors, reconcile exceptions, and preserve traceability and audit records? 13. What, if any, technical personnel or services would be recommended for Azure connectivity, interface development, configuration, end-to-end testing, documentation, and transfer of knowledge to Government IT staff? D. Security, sustainment, and market considerations 14. Identify cybersecurity and device-management controls, including encryption, authentication, access management, logging, patching, and operation within an existing federal cloud authorization boundary. Identify any external cloud services or data flows. 15. How would your recommended solution handle network outages, delayed data delivery, hardware failures, recovery, and scaling across additional facilities? 16. Describe ongoing support, maintenance, warranties, equipment replacement, licensing, proprietary dependencies, and the ability for Government personnel to sustain and expand upon the recommended solution. 17. Provide your relevant experience with multi-site RFID installations and integrations with existing enterprise or Azure-hosted systems, including lessons learned and measurable results where available. 18. Provide rough-order-of-magnitude cost drivers or illustrative cost ranges, separated where possible into equipment/tags, site installation, integration and engineering, licensing, training, and recurring sustainment. Identify assumptions and cost-saving alternatives. D. Company Overview and Capabilities 19. Provide a Company Overview and Capabilities to include: Business name, company website, and headquarters address. Name of company representative and their business title. Unique Entity ID number. Socio-economic status, business size, and size standard/applicable. Certified North American Industry Classification System (NAICS) codes for required services stated in objectives. Contract vehicles that would be available to the Government for the procurement of the requirements, to include General Service Administration, NASA Solution for Enterprise-Wide Procurement, Federal Supply Schedules, or any other Government Agency contract vehicle. Brief description of your company’s relevant core corporate capabilities and demonstrated prior relevant experience. 6.0 RESPONSES Interested parties are requested to respond to this RFI. Responses shall be in Microsoft Word or Office compatible format using a 12-point font. Responses are due no later than Wednesday, November 4, 2026 at 12:00 noon EST. Responses shall be limited to 14 pages. The email subject line should be: “(Insert Company Name), RFI Response: RFID Integration”. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. To aid the Government, please segregate proprietary information. Please be advised that all submissions become Government property and will not be returned. RFI responses shall be sent, via email, to: Pamela Miller, Contract Specialist Pamela.A.Miller@census.gov Kristina Hartman, Contracting Officer Kristina.D.Hartman@census.gov
60%
Market Research11/04/2026
58%
Sole Source / J&AOpen

Additional Details

Solicitation Number

HC104718R4021

Archive Date

Sep 19, 2018