HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement
Archived on October 21, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 9:59 AM PDT
- Posted
- September 29, 2026
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- 336611: Ship Building and Repairing
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- SFLC PROCUREMENT BRANCH 2(00085)
- Place of performance
- Seattle, Washington, 98134
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- HEALY-SLEP-Industry-Day
- Notice ID
- 00b77bb080ee409584d7c0fb8927ca7f
Description
1. General Notice & Statutory Authority
This Special Notice is published in accordance with Revolutionary FAR Overhaul (RFO) framework, including RFO FAR Part 5.1 (Publicizing Contract Actions) and RFO FAR 15.101 (Early Exchanges with Industry).
The United States Coast Guard (USCG) is conducting market research and early industry engagement to refine requirements, assess industry capabilities, evaluate integration risks, and inform its acquisition strategy for two major engineering modernization packages aboard USCGC HEALY (WAGB-20). The installations for these efforts are planned for the vessel's FY2029 Maintenance Availability.
This notice is for information and planning purposes only and does not constitute a Request for Proposal (RFP).
2. Scope of Requirements
The Government is seeking industry feedback on the following two distinct work packages:
Requirement 1
Deaerating Feed Tank (DFT), Feedwater Treatment, & Boiler Controls
• Design, furnish, and install one (1) new Deaerating Feed Tank (DFT) and associated feedwater treatment system.
• Renew the existing obsolete boiler Programmable Logic Controller (PLC) and burner sequencing controls.
• Deliver design documentation and integration components to support installation during the availability.
Requirement 2
COTS PLC-Based Steering Control System Replacement
• Replace the existing steering control system with an open-architecture, commercially available off-the-shelf (COTS) PLC-based design.
• Interface new controls with existing auxiliary and navigation systems.
• Replace or upgrade all electronic components and sub-systems, including Rudder Servo Amplifiers (RSA), Rudder Repeat Backs (RRB), Rudder Angle Transmitters (RAT), and Steering Failure Alarm (SFA) panels to retain full capabilities without requiring exact legacy duplication.
3. Event Schedule
The event structure will follow the below. Please specify which requirements you are interested in upon registration.
Day 1 (26 OCT): DFT & Boiler Controls
0730 - 0830: Shoreside - TBD; Opening remarks, acquisition timeline, and technical overview of DFT, feedwater, and boiler PLC scope.
0830 - 1000: CGC HEALY; Guided walkthrough of Boiler Room, Auxiliary Machinery Spaces, and piping routes aboard USCGC HEALY.
1000 - 1300: Shoreside - TBD; Scheduled Group Guided discussions, questions from industry for DFT and Boiler automation vendors.
Day 2 (27 OCT): Steering Control System
0730 - 0830: Shoreside - TBD; Opening remarks, acquisition timeline, and technical overview of COTS PLC steering replacement, navigation interfaces, and sub-system requirements (RSA/RRB/RAT/SFA) scope.
0830 - 1030: CGC HEALY; Guided walkthrough of Steering Gear Flat, Bridge Consoles, and associated cable ways aboard USCGC HEALY.
1030 - 1300: Shoreside - TBD; Scheduled Group Guided discussions, questions from industry for Steering Control system integrators and OEMs.
See attached even schedule.
4. Registration, Security, & Access Guidelines
Due to vessel space and security limitations, company attendance is restricted to a maximum of three (3) representatives per company.
Registration Package Requirements
Interested parties must submit their registration packet to the Points of Contact listed below no later than Oct 06, 2026 09:59 am PDT. The registration email must include:
- Company Information: Full Legal Name, CAGE Code, and Unique Entity Identifier (UEI).
- Attendee Information: Full Legal Name, Title, Email Address, Phone Number, Date of Birth, and State ID / Passport Number.
- Session Preferences:
- Indicate attendance for Requirement 1, Requirement 2, or Both.
- Request for a Day 2 / Afternoon One-on-One Session (Yes/No) and preferred requirement track.
- Advance Technical Inquiries: (Optional) Written questions or points of clarification regarding the draft SOWs.
⚠️ Security & Safety Instructions
- Citizenship: Attendance is restricted to U.S. citizens only. Valid Government-issued photo identification (e.g., Real ID driver's license or U.S. Passport) is required for base and vessel entry.
- Personal Protective Equipment (PPE): OSHA-compliant PPE is mandatory for shipboard walkthroughs. All attendees must provide their own hard hat, safety glasses with side shields, high-visibility vest, and steel-toe safety footwear. The USCG will not provide PPE.
- Prohibited Items: Cameras, unauthorized recording devices, and wearable electronics with recording capabilities are strictly prohibited in operational shipboard spaces.
5. Rules of Engagement & FAR Disclaimers
-
Planning & Market Research Only: This Special Notice is issued solely for informational and acquisition planning purposes in accordance with RFO FAR Part 5 and RFO FAR 15.101
-
No Solicitation or Contract Commitment: This notice does not constitute a Request for Proposals (RFP), Request for Quotations (RFQ), or Invitation for Bids (IFB). No contract will be awarded as a direct result of this event or notice.
- Cost Reimbursement: The Government will not reimburse attendees for any costs associated with attending this Industry Day, participating in one-on-one sessions, or preparing informational responses.
- No Favorable Consideration: Participation in the Industry Day or any subsequent exchange does not guarantee participation in future procurements nor does it imply favorable consideration in any eventual competitive evaluation.
6. Primary Points of Contact
Submit completed registration packages and inquiries to: Contracting Officer: Kiya Plummer-Dantzler, Email: Kiya.r.plummer-dantzler@uscg.mil, Mobile: 510-501-5550. Contracting Specialist: Jaime (Hi-me) Diaz, Email: Jaime.Diaz3@uscg.mil, Work Phone 571-608-4295.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (5)
- Download
Industry Day Event Schedule.docx
15 KBAdded in Sources Sought version 1Posted - Download
WI 111 HEALY SLEP DFT SOW_FINAL_09Sep26.pdf
482 KBAdded in Sources Sought version 1Posted - Download
Section C-1 DFT Specification (SLEP) 08Mar26.pdf
15 MBAdded in Sources Sought version 2Posted - Download
WI 41_HEALY_SteeringControlSystem_SOW_Draft.0_09Sep2026.pdf
716 KBAdded in Sources Sought version 1Posted - Download
Base Access Form USCGC Healy Industry Day.xlsx
28 KBAdded in Sources Sought version 1Posted
Lifecycle
- 1Version 1Sources Sought
HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement
- 2Version 2Sources SoughtCurrent
HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This announcement is a Sources Sought Synopsis (market survey). This is not a Request for Quote (RFQ) or a Request for Proposal (RFP). This announcement is for information and planning purposes only and is not a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The purpose of this sources sought is to determine interest and capability of potential businesses. The Government may use responses to this sources sought synopsis to make an appropriate acquisition decision for this project. The U.S. Coast Guard Surface Forces Logistics Center is conducting market research for potential qualified contractors for the maintenance and support of the systems and equipment pertaining to the Integrated Propulsion Plant on Coast Guard Cutter (CGC) HEALY from 20JULY2028 – 21JULY2033. GE Power, Power Conversion a Part of GE Vernova (GE) is the original equipment manufacturer (OEM) of the Integrated Propulsion Plant on CGC HEALY and holds the proprietary data rights to provide the required repair and support. The previous contract was awarded sole source to GE under contract number 70Z08523DLREP0003. This work requires that the Contractor provide all management, supervision, personnel, labor, materials and equipment (except for Government furnished property) required to maintain and support the integrated machinery plant systems/components on CGC HEALY and Government owned shoreside equipment that is used in support of CGC HEALY. Support includes, but is not limited to, periodic equipment maintenance, technical representative visits, telephone consultations, remote technical support, hardware and software configuration management services, conditional technical support, upgrades, and periodic equipment training. A draft of the current awarded performance work statement is provided for information only. This work includes, but is not limited to, the following: Periodic system maintenance and equipment grooms. This includes annual shipboard depot level maintenance and shoreside spare depot level maintenance at CG Inventory Control Point (ICPs) and Contractor’s facilities, inspection, and operational testing of all systems and equipment related to the Integrated Power Plant. Technical Support. This includes immediate access to 24/7 technical support while the Cutter is underway and during port calls while on mission. Conditional technical support for troubleshooting and repairs. This includes casualty response and repairs, as well as engineering analysis and repairs identified as necessary during equipment grooms. Configuration management services. This includes obsolescence evaluation and prediction of out-year reliability, maintainability, and fitness of service availability concerns five years beyond the contract. Crew training. This includes hands-on and classroom training for operators and maintainers both attached to HEALY as permanent party crew and CG shore support personnel. Technical refresh and replacement of obsolete subcomponents to meet current industry supportability standards. This includes design, validation, and installation of specific system subcomponents to ensure operational availability and maintenance support through the midlife maintenance period. The CGC HEALY is homeported in Seattle, WA at 1519 Alaskan Way S., Seattle, WA 98134. The CGC HEALY, the Coast Guard's largest vessel, is 420 feet long, 82 feet wide, drafts 31 feet (at full load), and weighs 16,660 long tons (at full load). NAICS Code for this requirement: 336611 – Ship Building and Repairing FSC Code for this requirement: J999 – Non-Nuclear Ship Repair (West) Size Standard: 1,300 Employees Please note that the period maintenance being performed will occur during planned dry dock and dockside availabilities, at which time other substantial depot-level maintenance will be accomplished. No cost or pricing data is required. All responsible sources may submit a capability statement, which will be considered by the agency. If interested and capable of performing the work please respond to the attached questionnaire returning it via email to Contract Specialist Sherri Ore at Sherri.S.Ore@uscg.mil and Contracting Officer, Amy Kelm, at Amy.A.Kelm@uscg.mil. Please insert - Sources Sought Response to 70ZU027ILREP1113 in the subject line. | 77% | Market Research | 11/29/2026 |
This announcement is a Sources Sought Notice. This announcement is for information and planning purposes only and is not a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The purpose of this Sources Sought Notice is to determine interest and capability of potential businesses. The information obtained from this notice is for market research only and will be used to determine the method of procurement including whether to set-aside the requirement for small business or other set-aside programs. REQUIREMENT: The U.S. Coast Guard is looking for sources which would be capable and interested in performing to provide a FIREFIGHTING PROTECTION SYSTEM MAINTENANCE onboard all 418’ WMSL national security cutter classes. The Coast Guard intends to award a multiple or single award multi-year IDIQ contract. The homeports for these cutters are Alameda, CA, Honolulu, HI, and Charleston, SC. A copy of the drafted specification for this requirement is attached to this notice. The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. ANTICIPATED PERIOD OF PERFORMANCE: The anticipated performance period of this upcoming requirement could commence on 01 May 2027 through 30 April 2032. SUBMISSION OF RESPONSE TO SOURCES SOUGHT NOTICE: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Responses shall be submitted no later than 06 November at 2:00PM PST. Forward information regarding your Company via email to: Valerie.S.Riverachase@uscg.mil, Contracting Officer, and use as subject line: Sources Sought Response to USCGC FIREFIGHTING PROTECTION SYSTEM MAINTENANCE Submission of Response to Sources Sought Notice: Include the following information: Subject Line: Sources Sought Response for FIREFIGHTING PROTECTION SYSTEM MAINTENANCE FY 27. 1. Company Name, Address, and Unique Entity ID: 2. Point of Contact, Phone number, and Email address: 3. Business Size applicable to the NAICS Code 336611 Please state which of the following applies to your company for Business Size: a. 8(a) Small Business Concern: b. HUBZone Small Business Concern: c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC): d. Veteran Owned Small Business Concern (VOSBC): e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB): f. Woman Owned Small Business Concern (WOSBC): g. Small Business Concern: h. Large Business Concern: 4. Provide a positive statement of your intention to submit a bid for this solicitation as a prime Contractor. 5. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company: If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA). If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA. If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of War. Finally, provide documentation that shows the business is small under the NAICS code 336611. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, makes long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. 7. SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220. NOTE: SUBJECT TO AVAILABITY OF FUNDS. THIS PROJECT MAY BE CANCELLED. THIS REQUEST IS FOR MARKET RESEARCH PURPOSES ONLY. The Government intends to advertise a solicitation for this project in the future. At this time, solicitation does not exist, therefore, offers will not be accepted. It is the potential offeror’s responsibility to monitor https://sam.gov.content/home for release of any future solicitation that may result from this Sources Sought Notice. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation fo | 71% | Market Research | 11/09/2026 |
The U.S. Coast Guard is looking for sources which would be interested in performing In Service Vehicle Sustainment (ISVS) and planned maintenance repairs for Coast Guard Cutter (CGC) HEALY. The performance period for the first period of this upcoming requirement is tentatively projected to be 1 November 2027 – 30 April 2028; second period 1 November 2028 – 30 April 2029; third period 1 November 2029 – 30 April 2030; fourth period 1 November 2030 – 30 April 2031. It is anticipated that requests for proposals would tentatively be issued around 2 April 2027 and the contract would be awarded around 15 October 2027. Coast Guard Cutter HEALY is a medium polar icebreaker, homeported in Seattle, WA. The vessel is about 420 feet long with an 82-foot beam. Attached is the draft list of work items. All repairs would take place at the vendor facility and/or the cutter’s homeport depending on the ultimate structure of the contract. The Coast Guard intends to award a multiple or single award multi-year IDIQ contract to include recurring maintenance and possible non-recurring maintenance (engineering changes in development) onboard CGC Healy, with the desire to complete all maintenance under the same contract; this includes maintenance requiring a drydock availability and maintenance that can be accomplished pier side. The Coast Guard anticipates one dry dock availability every three years, and one dockside availability each year in between. The Coast Guard requests industry input on the viability of such a contract. Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size/status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc.…. Further if there are no past performance evaluations on file in the Past Performance Information System Retrieval database, contractors should provide a couple past performance references including the following information: contract numbers, project titles, dollar amounts, points of contact and telephone numbers. Also please provide your company input on meeting this requirement through a multiple or single award multi-year IDIQ contract, to include recurring maintenance and possible non-recurring maintenance (engineering changes in development) onboard CGC Healy, with the desire to complete all maintenance under the same contract; this includes maintenance requiring a drydock availability and maintenance that can be accomplished pier side. The Coast Guard anticipates one dry dock availability every three years, and one dockside availability each year in between. Replies should be sent by 29 October 2026, 2:30 pm Pacific Time to: Andrew Jacobs, Contracting Officer at andrew.g.jacobs@uscg.mil and LCDR Ryan T Ostrander at ryan.t.ostrander@uscg.mil. Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a request for proposal will be posted on www.sam.gov. The NAICS Code is 336611. The small business size standard is less than 1300 employees. Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Set-Aside for, Service-Disabled Veteran-Owned Small Business…” would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service-disabled veteran owned small businesses. Additionally, regarding FAR 52.219-30 "Notice of Set A-Side for Women-Owned Small Business Concerns…": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. | 71% | Market Research | 10/29/2026 |
68% | Awarded | Open | |
9/23/2026: This update is to answer 2 questions rececived Question: Once a formal solicitation is issued, will the availability be Geographically restricted to the homeport of the vessels? Answer: USCG does not plan to geographically restrict the drydocks to the homeport of each vessel. 2. Question: What is the minimum draft for the 418 ft vessels? Answer: The minimum draft is 24.5' 9/10/2026: The U.S. Coast Guard Surface Forces Logistics Center is conducting market research for the drydocking of six (6) Pacific Area based Maritime Security Cutters, Large (WMSL) between Fiscal Year 2028 and 2033. The performance period for this contract is from 15 March 2028 to 30 September 2033 with six (6) planned drydocks and one (1) emergent drydock anticipated. The WMSLs are homeport in Alameda CA at 42 Eagle Rd, Alameda, CA and 400 Sand Island Access Pkwy, Honolulu, HI 96819. Refer to attached list of Work Items anticipated. The WMSLs are homeport in Alameda CA at 42 Eagle Rd, Alameda, CA and 400 Sand Island Access Pkwy, Honolulu, HI 96819. | 68% | Market Research | 10/08/2026 |
Additional Details
Solicitation Number
HEALY-SLEP-Industry-Day
Archive Date
Oct 21, 2026
Office Address
ALAMEDA, CA, 94501