GovChime
Notice ID: 09bbbbbc255349bfbccd1bbe9ca80d52Award NoticeAwarded

Knives, Blades, Plates, and Sharpening

Awarded on February 1, 2024. Full description on SAM.gov.

Awarded tounder HQC00424D0009 (source: SAM.gov award notice)• $6.6M

Overview

Posted
September 20, 2024
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Agency
Department of War

Notice details

Place of performance
Shelby, NC
Last updated
Dec 4, 2025
Award date
Feb 1, 2024
Award amount (SAM.gov award notice)
$6.6M

Identifiers

Solicitation number
HQC00422Q0029
Notice ID
09bbbbbc255349bfbccd1bbe9ca80d52
Award number (PIID)
HQC00424D0009

Description

This requirement is for Knives, Blades, Plates, and Sharpening for all CONUS commissaries including Hawaii, Alaska, and Puerto Rico. See attached spread sheet for the description of required products. The contractor will be required to deliver to the requesting commissary store. There is no commitment by the Government to issue an RFQ, make award(s), or to be responsible for any monies expended by industry responses to this RFQ. Each commissary will be ordering on a monthly basis and require product delivery within 30 business days. This solicitation is expected to result in the award of a firm-fixed price contract. Each Offeror shall submit a completed Knives, Blades, Plates and Sharpening pricing sheet, a written technical narrative detailing how they intend to perform the requested service, past performance references, and completed copies of the provisions listed in the “Required Offeror Completed Provisions and Clauses” section below. The Request for Quote will be submitted as a separate document. Quotes are due by January 23, 2024, 10:00 AM EST. All questions/inquiries must be submitted to the contract specialist and contracting officer via electronic mail (e-mail) not later than 12:00 PM EST on January 22, 2024. Inquiries submitted via telephone calls will be re-directed to an e-mail submission. Submit offers or any questions to the attention of Fatia Broussard and copy to Evelyn Settles via email to: fatia.broussard@deca.mil and Evelyn.Settles@deca.mil respectively. Attached is the combined synopsis solicitation, Statement of Work and pricing sheet for review/completion.

Full description on SAM.gov

Award Overview

Award Number

HQC00424D0009

Award Amount (SAM.gov award notice)

$6.6M

Award Date

Feb 1, 2024

Awardee

Awardee UEI

HTM8KNAMGLJ9

Original Solicitation

Notice ID: 09bbbbbc255349bfbccd1bbe9ca80d52

Posted Date: Sep 20, 2024

Original Response Deadline: Not specified

Task Orders Under This IDV

Top 10 by total obligated

4
  • HQC00425F0009
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $1.2MSigned Jan 29, 2025
  • HQC00424F0499
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $1.1MSigned Apr 16, 2024
  • HQC00424F0499
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $1.1MSigned May 15, 2024
  • HQC00426FE114
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $929.5KSigned Apr 23, 2026

More From This Vendor

Top 5 most recent

4
  • HQC00426FE114
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $929.5KSigned Apr 23, 2026
  • HQC00422F0014
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $542.7KSigned Sep 9, 2025
  • HQC00422F0014
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $542.7KSigned Sep 4, 2025
  • HQC00425F0009
    ARCHWAY SERVICE INC
    Department of DefenseNAICS 811310
    $1.2MSigned Jan 29, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:HQC00422Q0029
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. 3×
    Combined SynopsisSep 26, 2023

    Knives, Blades, Plates, and Sharpening

    Notice e6d2eb66eb1e431b8d0388ec70605c99 on SAM.gov

  2. AwardedCurrentSep 20, 2024

    Knives, Blades, Plates, and Sharpening

    Notice 09bbbbbc255349bfbccd1bbe9ca80d52 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a Sources Sought notice for market research purposes only. This is not a formal request for competitive offers and in no way obligates the Government. The Government retains the right not to open the requirement to competition based upon the responses to this notice. The Washington Headquarters Services (WHS) Acquisition Directorate (AD) seeks interested companies that are qualified and authorized to provide emergency repair and parts corrective maintenance, and software subscription services for Caterpillar generators. The contractor shall perform emergency repair corrective maintenance services on the Caterpillar generators at Site R located in Adams County, Pennsylvania.The anticipated period of performance will be for one 12-month base year plus four 12-month option years. The contractor must be able acquire and maintain a SECRET facility clearance while performing work for this requirement. Please see attached Performance Work Statement (PWS) for performance requirements.The Product Service Code (PSC) is J030, Maintenance, Repair, and Rebuilding of Equipment ? Mechanical Power Transmission Equipment; The anticipated North American Industry Classification System (NAICS) code for this acquisition is 811310. The Small Business size standard is $12.5 million.Small Businesses, 8(a) small businesses, HUBZone small businesses, Service-Disabled Veteran-Owned Small Businesses, Women-Owned Small Businesses and Economically Disadvantaged Women-owned Small Businesses are encouraged to respond.Instructions: All interested companies that have the capability to perform are encouraged to submit a capability statement to the Contract Specialist, Ms. Nala S. Pittman at Nala.S.Pittman.civ@mail.mil and the Contracting Officer, Ms. Melvina L. McNeill at Melvina.L.McNeill.civ@mail.mil, with the subject line: Response to Sources Sought HQ003426QE084 Caterpillar Generators Maintenance Service and Repairs. Please provide the following information:1. A brief two to three-page synopsis of similar work performed and identify contracts previously awarded under NAICS 811310 (or similar). Include contract number, supported agency, and Contracting Officer contact information.2. Company name, address, UEI and CAGE Code Number.3. Company Point of Contact name, phone number, and email.4. Small businesses must identify their socio-economic status (i.e. small business category (e.g. 8(a), service-disabled veteran owned, HUBZone, small disadvantaged, veteran-owned, or women-owned).5. Are you an authorized Caterpillar (CAT) dealer, reseller, or service provider? Please describe your partnership level and provide evidence of your authorization.6. Identify whether your company offers the services on a Federal Supply Schedule listed under GSA Advantage. 7. Recommended/suggested NAICS codes for this effort if different from 811310.8. Indicate whether you have personnel with active Secret Facility Clearances.9. After reviewing the PWS, do you have any recommendations to improve its clarity, efficiency, or cost-effectiveness?10. Do you foresee any challenges in providing all three core services (software, parts, and labor) under a single contract?Attachment:1. A03 DRAFT PWS CAT Software, Inventory, Stock and Emergency Repairs and Parts
-Market Research04/22/2026
This solicitation is being issued as 100% set-aside for small businesses. The solicitation is for the performance of preventive maintenance (PM) and repair services on Government owned Material Handling Equipment (MHE) as required for the Defense Commissary Agency commissaries located at Richards-Gebaur and Whiteman AFB. The MHE consists of the following: Battery Chargers; Electric Pallet Jacks; Electric/Gas/Propane Forklifts, Walkie Riders, and Walkie Stackers. A Time and Materials contract is contemplated. The RFP will be posted on Beta.SAM.Gov at https://beta.sam.gov. Offerors may obtain a copy of the solicitation at this site. The product service code (PSC) is J039. North American Industry Classification System (NAICS) Code is 811310 and the business size standard is $8 million. All responsible sources may submit an offer, which will be considered by the above agency. By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award of any contract resulting from this solicitation to include listing NAICS Code 811310 in the database prior to award of any contract resulting from this solicitation. Further information about registration may be found on the Internet at https://sam.gov/SAM. Questions pertaining to this notice and solicitation should be directed to David Mizelle via phone at 804-734-8000 x86489 or e-mail david.mizelle@deca.mil.
-Solicitation03/15/2021
This solicitation is being issued as 100% set-aside for small businesses. The solicitation is for the performance of preventive maintenance (PM) and repair services on Government owned Material Handling Equipment (MHE) as required for the Defense Commissary Agency commissaries located at Andrews AFB, Ft Meade and Annapolis, MD. The MHE consists of the following: Battery Chargers; Electric Pallet Jacks; Electric/Gas/Propane Forklifts, Walkie Riders, and Walkie Stackers. A Time and Materials contract is contemplated. The RFP will be posted on Beta.SAM.Gov at https://beta.sam.gov. Offerors may obtain a copy of the solicitation at this site. The product service code (PSC) is J039. North American Industry Classification System (NAICS) Code is 811310 and the business size standard is $8 million. All responsible sources may submit an offer, which will be considered by the above agency. By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award of any contract resulting from this solicitation to include listing NAICS Code 811310 in the database prior to award of any contract resulting from this solicitation. Further information about registration may be found on the Internet at https://sam.gov/SAM. Questions pertaining to this notice and solicitation should be directed to David Mizelle via phone at 804-734-8000 x86489 or e-mail david.mizelle@deca.mil.
-Pre-Solicitation01/28/2021
REBUILD (1) CUMMINS NT855M DIESEL ENGINE AND TWIN DISC CLUTCH
-Solicitation11/17/2026
Commander, Fleet Readiness Centers (COMFRC) Procurement Group, Patuxent River, MD, hereby gives notice of intent to award a purchase order to Oxford Instruments America, Inc., (Cage Code: 1EPT2), on a sole source basis in accordance with Federal Acquisition Regulation (FAR) 12.102(a), only one source reasonably available and no other supplies or services will satisfy agency requirements. The purchase order is expected to include a one-year period of performance. FRC Southeast has a requirement for annual X-Ray Spectrometer Preventative Maintenance. Oxford Instruments America, Inc., (Cage Code: 1EPT2) is the OEM for the X-Ray Spectrometer. Oxford Instruments America, Inc., based in Massachusetts, is the only known source for the required preventative maintenance services. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. However, all responsible sources may submit a capability statement, which, if received within five (5) calendar days after the date of the publication of this synopsis, will be reviewed. Information received will be considered solely for the purpose of determining whether to conduct competitive procurement. A determination by the Government not to compete this requirement based upon responses received as a result of this notice is solely within the discretion of the Government.
-Special Notice11/13/2026

Additional Details

Solicitation Number

HQC00422Q0029

Archive Date

Sep 21, 2024

Office Address

FORT GREGG ADAMS, VA, 23801-1800