GovChime
Notice ID: 7f6a48adb7fe40b7489fbbf5b86eaa0eSolicitation

Commerical Leaded Training Ammunition

Archived on February 19, 2014. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
9:30 PM UTC+02:00
Posted
August 16, 2012
Notice type
Solicitation
NAICS
332993: Ammunition (except Small Arms) Manufacturing
Agency
Department of Homeland SecurityFEDERAL LAW ENFORCEMENT TRAINING CENTER

Notice details

Office
FLETC GLYNCO PROCUREMENT OFFICE
Place of performance
1131 Chapel Crossing Road, Glynco, 31524
PSC
13: AMMUNITION AND EXPLOSIVES
Last updated
Dec 5, 2025

Identifiers

Solicitation number
HSFLGL-12-B-00003
Notice ID
7f6a48adb7fe40b7489fbbf5b86eaa0e

Description

Effective 7/19/2012, send all questions to Sheryle Wood via email at sheryle.wood@dhs.gov.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Sheryle Wood
Contracting Officer

Secondary Contact

Sheryle Wood
Contracting Officer
Fax: 9122805343

Documents

No documents available.

Lifecycle

Solicitation:HSFLGL-12-B-00003
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 3×
    Pre-SolicitationApr 17, 2012

    Commerical Leaded Training Ammunition

    Notice d024b4476b2648e5c1c7856f3e7cf5e3 on SAM.gov

  2. SolicitationCurrentAug 16, 2012

    Commerical Leaded Training Ammunition

    Notice 7f6a48adb7fe40b7489fbbf5b86eaa0e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
3-Nov-2026: Please be advised that the following has been updated/added to this notice: 1) W519TC-26-R-A061 indutsry Day Attendees List. 2) W519TC-26-R-A061 Industry Day Slides. 3) W519TC-26-R-A061 Industry Day Questions and Answers. Please review and any questions may be directed to the POCs below. 8-Sep-2026: Please be advised that the following has been updated/added to this notice: 1. Item 7 - Industry Day Registration Form - has been revised to Rev2. Please complete and submit this revision when registering for the FY27-32 120mm Tank Training Ammunition Industry Day. 2. Industry Day Information (attendance information updated): An Industry Day for the W519TC-26-R-A061 FY27-32 120MM Tank Training Ammunition program is scheduled for September 22 and 23, 2026. The in-person event will be hosted at PM-MAS, Picatinny Arsenal, Picatinny, NJ, and a Microsoft Teams link will be provided for virtual attendance. This event presents a vital opportunity for industry partners to gain a comprehensive understanding of the technical and logistical requirements for this upcoming multi-year program. In addition, details for the source selection process and timelines will also be provided. In-person attendance is strictly limited to five (5) personnel per eligible "prime" offeror team and two (2) personnel per eligible subcontractor. In order to be eligible, the offeror has to have an approved/active DD2345 to be eligible for attendance. Government representatives will host One-on-One sessions for prime offerors on September 22 and 23. These sessions are limited and will be allocated on a first-come, first-served basis. 1-Sep-2026: Please be advised that the following has been updated/added to this notice: 1) Item 7 - Industry Day Registration Form - has been revised to Rev1. Please complete and submit this revision when registering for the FY27-32 120mm Tank Training Ammunition Industry Day. 2) Item 8 - Industry Day Agenda - has been added to this notice. 3) The document "4A6A03MLM2_tdpl" found in the Draft TDP for the M1002 has been re-uploaded. The previous version of this document had issues with being opened. Original Notice: The U.S. Government (USG) is providing this draft Request for Proposal (RFP) W519TC-26-R-A061 information to give potential offerors advance notice of the upcoming Fiscal Years 2027-2032 (FY27-32) 120mm Tank Training Ammunition acquisition. A formal Request for Proposal (RFP) is anticipated to be published in the near future. Please Note: All documents within this posting are preliminary and subject to change. They are provided solely to assist potential offerors in the early planning stages of their proposal submissions. Questions and requests for clarification regarding these draft documents will be accepted until 15-Sep-2026. All inquiries should be directed to: Angela Calhoun, Contracting Officer: angela.m.calhoun.civ@army.mil and Dave Buennig, Contract Specialist: david.w.buennig.civ@army.mil The following draft documents are included in this posting: 1. Draft Technical Data Packages (TDPs) for M1002 and M865A1 Cartridges: Please follow the instructions in the Attachments section of this notice to access these documents. Note that these TDPs have been updated from the draft TDPs previously posted under Sources Sought W519TC-25-R-TANK. 2. Draft Statement of Work (SOW): Covers the FY27-32 120mm Tank Training Ammunition production. 3. Draft Supplier Table: Instructions for completion are included within the document itself. 4. Draft RFP Sections L and M: These draft sections will provide Proposal Submission Instructions, Evaluation Criteria, and Basis for Award. 5.Draft Price Matrix: Anticipated CLIN structure, quantity ranges, and pricing information. 6. Procurement Integrated Enterprise Environment (PIEE) Vendor Registration Guide: RFP W519TC-26-R-A061 is anticipated to be released through the PIEE Solicitation Module. In this guide, you will find step by step by step instructions for new users to self-register for a PIEE user account and existing users to add additional roles. Registration can be time-consuming. It is highly recommended that potential offerors begin this process as soon as possible. 7. Industry Day Information: An Industry Day for the W519TC-26-R-A061 FY27-32 120MM Tank Training Ammunition program is scheduled for September 22 and 23, 2026. The in-person event will be hosted at PM-MAS, Picatinny Arsenal, Picatinny, NJ, and a Microsoft Teams link will be provided for virtual attendance. This event presents a vital opportunity for industry partners to gain a comprehensive understanding of the technical and logistical requirements for this upcoming multi-year program. In addition, details for the source selection process and timelines will also be provided. Due to facility constraints, in-person attendance is strictly limited to five (5) personnel per eligible "prime" offeror team, inclusive of all teammates and subcontractors. In order to be eligible, the offeror has to have an approved/active DD2345 to be eligible for attendance. Government representatives will host One-on-One sessions on September 22 and 23. These sessions are limited and will be allocated on a first-come, first-served basis. Registration Instructions & Points of Contact (POC): To register for the Industry Day and request a One-on-One session, please submit your registration package via email to all of the following: Angela Calhoun, Contracting Officer: angela.m.calhoun.civ@army.mil Dave Buennig, Contract Specialist: david.w.buennig.civ@army.mil Kris Aguilar, Management Support Assistant, kristin.aguilar3.ctr@army.mil Required Registration Information: When submitting your request, you must provide the following details: Company Information: Company Name (Prime Offeror) and listed teammates/subcontractors. In Person Attendee Roster: Full Name, Job Title, Email Address, and Citizenship for each of the maximum five (5) attendees. See Registration Request Form Virtual Attendee Roster: At the request of the Prime – See Registration Request Form One-on-One Request: Please state whether your team is requesting a One-on-One session. Registration forms for the Industry Day must be completed and submitted before Noon Eastern Time 15-Sep-2026. PM-MAS will submit all Visitor Request Forms to the Picatinny Security Office for the Industry Day Event and will setup all MS Teams Virtual Links for those off-site attendees. Note: No foreign national visitor paperwork will be accepted. Foreign Nationals will NOT BE ALLOWED to participate In Person or Virtually for this Industry Day Event. 8. Picatinny Arsenal Access & Security Requirements To ensure a seamless entry process for the Industry Day, it is vital to communicate the strict security protocols of the military installation. Below are the key security details that should be added directly to the announcement. Upon entry to Picatinny Arsenal, Visitors must provide/follow the below: Primary Identification - All attendees must present a valid Common Access Card (CAC) or a REAL ID-compliant state driver's license/U.S. Passport. If a driver's license is marked "Not for Federal Identification," a secondary valid government photo ID is required. Vehicle Access - Drivers must present a valid driver's license, vehicle registration, and proof of insurance at the gate. Rental car agreements are acceptable but must be presented upon entry. Gate Processing and Vehicle Searches - Visitors without a DoD CAC card must process through the Visitor Control Center (VCC) at the Main Gate (Building 1136) for a rapid background check and pass issuance prior to driving through the main gate. Visitors must enter through the “Visitor Pass Lane Only” lane. All vehicles are subject to 100% search upon entry. Visitors will be required to provide visitor pass and valid ID to the Security Guard. Prohibited Items - Weapons, ammunition, illegal drugs, and alcohol are strictly prohibited on the installation. Note: Photography and recording devices (including professional cameras) are prohibited unless explicitly authorized. Smart Phones are allowed on Post but may not be used to photograph or record anything while on Post. Foreign National Vistors - Foreign Nationals are will not be allowed on post for this specific activity. If a Foreign National submits a registration form request for this Industry Day Event, it will be denied.
66%
Pre-Solicitation09/15/2026
THIS IS A PRE-SOLICITATION NOTICE / SYNOPSIS This procurement is for HOLDER, AMMUNITION This proposed solicitation is intended to result in the award of a Firm-Fixed Price type Contract for the supplies specified with a one year buying option. The Government does not intend to use FAR Part 12 for the acquisition. Procurement is 100% Small Business Set-Aside. Noun: HOLDER, AMMUNITION NSN: 1398-01-330-9529 P/N: 12916856 Notes: We expect to post the solicitation in 2 to 4 weeks. Technical Data Package: A link to the TDP will be available when the solicitation is released. The TDP is EXPORT CONTROLLED, Distribution D Joint Certification Program (EXPORT CONTROL): You must be certified under the United States/Canada Joint Certification / Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center. "CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. Further information may be obtained through the internet at: https://www.sam.gov/SAM/pages/public/loginFAQ.jsf
53%
Pre-Solicitation11/16/2026
Requirement: The repair of the Ammunition Container (NSN: 1005-01-298-2522), a critical component exclusive to the F-15E's 20mm M61A1 Gatling gun system. The container is responsible for storing and feeding ammunition. Intended Source: This action will be a sole-source award to General Dynamics Ordnance and Tactical Systems (GD-OTS). Justification: The award is made under the authority of FAR 6.302-1. GD-OTS is the only source possessing the proprietary technical data and licenses required for the repair. The U.S. Government does not own the necessary data, precluding competition and making this action essential to prevent a critical gap in combat readiness. Contract Vehicle: The Government anticipates awarding a Requirements Indefinite Delivery Contract (IDC) with a one-year base period, four one-year ordering options, and a six-month extension option. NAICS Code: The anticipated NAICS code is 332993 The solicitation will be issued directly to the intended contractor on or about 20 April 2026, with proposals due by 5 Jun 2026. Participation by foreign contractors in this acquisition is not permitted.
53%
Pre-Solicitation04/20/2026
Through this CSO, the Army aims to identify and adopt innovative commercial solutions that accelerate the integration of advanced manufacturing technologies, enable secure and connected digital environments, and promote sustainable practices. The goal is to create a more agile, resilient, and technologically advanced industrial base that meets current and future operational demands while ensuring compliance with DoD standards for cybersecurity, sustainability, and readiness.
43%
Solicitation12/16/2026
Amendment 0010 - The purpose Amendment 0010 is to incorporate the updated questions and answers attachment and to formally revise the Prototype Project Opportunity Notice (PPON) Volume IV row of the Section 3.2.1 table. Specifically, this amendment:1. Formally Incorporates Updated Attachments: The following updated attachments are incorporated into the solicitation and replace all previous versions: Attachment 35 Updated MACE Offeror Questions Addressed (Dated 11-12), incorporating Questions #32 and #33. Please note Attachment 35 has been uploaded as a Controlled attachment. PPON Document MACE Extended November 30 W15QKN-26-R-1C5R (Dated 11-12), revised to incorporate the updated attachment list in Section 11 and Volume IV row of Section 3.2.1 table. 2. Establishes Proposal Submission Boundaries: This correction ensures that the SOW Section 6.0 Milestone Table remains strictly in Volume III (Cost/Price) as a priced document, while the Section 889 Certification is properly submitted within Volume IV (Miscellaneous Agreement Documentation).Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended attachments (dated November 12, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes..***********************************************************************************************************************************End of Narrative 0010************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0009 - The purpose of this Amendment 0009 is to incorporate the updated questions and answers attachment, formally revise the proposal submission portal instructions in the Prototype Project Opportunity Notice (PPON) and to add Attachment 34. Specifically, this amendment: Formally Incorporates Updated Attachments and a new attachment: The following attachments are incorporated into the solicitation and replace all previous versions: Attachment 33 Updated MACE Questions Addressed (Dated 11-5), incorporating Questions #24 through #31 (including key clarifications regarding propellant GFE, NRE milestone formatting, and payload canister compatibility). Please note Attachment 33 has been uploaded as Controlled attachment. Attachment 34 12961016 Rotating Cover Band has been uploaded as Controlled attachment in response to question #28. PPON Document: PPON MACE EXTENDED November 30 W15QKN-26-R-1C5R Dated 11-5) has been revised to incorporate the updated attachment list in Section 11. Amends the PPON Submission instructions: The PPON Document: PPON MACE EXTENDED November 30 W15QKN-26-R-1C5R Dated11-5) has been revised in Section 3.1.13 to formally correct the submission portal from SAM.gov to Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module: Revised Text: 3.1.13 All proposal submissions shall be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module (https://piee.eb.mil) .The direct solicitation link may be accessed via the active solicitation notice on SAM.gov. Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended attachments (dated November 5, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes. **************************************************************************************************************************************End of Narrative 0009************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0008 - The purpose of this Amendment 0008 is to incorporate updated questions and answers, and issue revised solicitation attachments. Specifically, this amendment: Formally Incorporates Updated Attachments: The following updated attachments are incorporated into the solicitation and replace all previous versions: Attachment 30 Updated MACE Offeror Questions Addressed (Dated 10-29), incorporating Questions #20 through #23.Attachment 31 Updated MACE CLIN Matrix (Dated 10-29), to clarify that the due dates for CLINs 0001A and 0014A represent the initiation of NRE activities, and that payment may be earned across interim milestones per Question #23.Attachment 32 Updated Statement of Work (SOW) (Dated 10-29), removing the administrative reference to Attachment B in SOW Section 8.0 per Question #21.Amends the PPON Text: The Prototype Project Opportunity Notice (PPON Document: PPON MACE EXTENDED November 30 W15QKN-26-R-1C5R Dated 10-29) has been revised in Section 3.3.3 (Volume III, Cost/Price) to add the following language to the third paragraph: to include the interim milestone allocations for Non-Recurring Engineering (NRE) under CLIN 0001A and CLIN 0014A. The attachment list has been updated to incorporate the revised attachments. Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended documents as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes.*******************************************************************************************************************************************************************************************************************************************End of Narrative 008 ******************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0007 - The purpose of this Amendment 0007 is to extend the solicitation response deadline, incorporate updated questions and answers, and issue revised solicitation attachments. Specifically, this amendment: Extends the Proposal Submission Deadline: The solicitation response deadline is extended from October 30, 2026, to 1500 EST on November 30, 2026. This extension is granted to ensure all potential offerors have sufficient time to conduct thorough analyses, address recent technical clarifications, and submit comprehensive, high-quality proposals that deliver the best value to the Government. As a result, the Prototype Project Opportunity Notice (PPON Document: PPON MACE EXTENDED November 30 W15QKN26R1C5R Dated 10-27) has been revised to reflect the new response deadline and the updated attachments list. Incorporates Updated Attachments: The following updated attachments are formally incorporated into the solicitation and replace all previous versions: Attachment 27 Updated MACE Offeror Questions Addressed (Dated 10-26), incorporating Questions #17 through #19.Attachment 28 Updated Statement of Work (SOW) (Dated 10-26), reflecting the revised anticipated award date of March 29, 2027, while maintaining relative milestone durations. Attachment 29 Updated MACE CLIN Matrix (Dated 10-26), incorporating dedicated Non-Recurring Engineering (NRE) line items pursuant to Question #17. Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended documents as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes. ************************************End of Narrative 0007 ******************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0006 - The purpose of amendment 0006 is to update the Question and Answer document from Attachment 23 - Updated MACE Offeror Questions Addressed 10-5 to Attachment 26 - Updated MACE Offeror Questions Addressed 10-15. This amendment also updates the PPON (PPON MACE Extended Updated Attachments (Updated 10-15)) to add Attachment 26 to the attachment list.*********************End of Amendment 0006************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0005 - The purpose of this Amendment 0005 is to resolve the schedule discrepancies identified in the solicitation and provide the definitive baseline for all proposal submissions. Specifically, this amendment: The Government acknowledges the discrepancy between the delivery dates specified in the original Statement of Work (SOW) (Attachment 7) and the performance periods specified in the original MACE CLIN Matrix (Attachment 4), which was caused by the proposal submission extension in Amendment 0001. This Amendment 0005 provides a revised and corrected Statement of Work (SOW) and CLIN Matrix. All schedule milestones have been aligned to relative durations (Months After Agreement Award) to ensure a stable, executable performance period. Amendment 0005 also adds the Updated MACE Questions Addressed plus an updated PPON which lists the amended attachments. The following updated attachments are formally incorporated into the solicitation and replace all previous versions: Attachment 25 Updated Statement of Work (SOW) (Dated 10-6) Attachment 24 Updated MACE CLIN Matrix (Dated 10 6) Attachment 23 Updated MACE Questions Addressed (Dated 10-5) PPON Document MACE Extended Updated Attachments W15QKN 26R1C5R (Dated 10-6) All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended documents (updated attachments October 5 and 6, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes. *********************End of Amendment 0005************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0004 - The purpose of amendment 0004 is to update the Question and Answer document from Attachment 15 - Updated MACE Offeror Questions Addressed 9-17 to Attachment 16 - Updated MACE Offeror Questions Addressed 9-24. Amendment 0004 also serves as notification that 6 additional TDP documents have been uploaded to SAM.gov. Vendors who have already been approved for the TDP can access the documents immediately, and those not previously approved may request access through SAM. **********************************************End of Amendment 0004************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0003 - The purpose of this amendment 0003 is to add Attachment 15 - Updated MACE Offeror Questions Addressed 9-17 **************End of Amendment 0003************************************************************************************************************************************************************************************************************************************************************************************************************************************Amendment 0002 - The purpose of this amendment 0002 is to add Attachment 15 - MACE Offeror Questions Addressed. *********************End of Amendment 0002 Narrative **************************************************************************************************************************************************************************************************************************************************************************************************************************** Amendment 0001 - The purpose of this amendment 0001 is to extend the solicitation response deadline from September 30, 2026 to October 30, 2026. This extension is granted to ensure all potential offerors have sufficient time to conduct thorough analyses, address recent technical clarifications, and submit comprehensive, high-quality proposals which deliver the best value to the Government. As a result of the extension, the Prototype Project Opportunity Notice (PPON) has been revised to reflect the new response deadline. Attachment 1 - Terms and Conditions has been updated in Supplement 5, Sub Section number 2 Outside Funding Contribution Schedule to change the Basic Agreement Years from FY 2026, FY 2027, FY 2028 to FY 2027, FY 2028, FY 2029. ****End of Amendment 0001 Narrative****************************************************************************************************************************** 155mm Modular Artillery for Combat Effectiveness (MACE) - Please refer to Prototype Project Opportunity Notice (PPON) and attachments. Please note: Attachment 8 - Purchase Description and Attachment 9 - Packing and Unitization Drawings will be provided to Offerors upon request once the Offeror signs, completes and submits the following documents for contracting approval: Attachment 12 Technical Data Request Questionnaire; Attachment 6 Non-Disclosure and Non US Agreement plus Attachment 14 DD2345 Military Critical Technical Data Agreement. Please refer to section 8 of the PPON for further information.
36%
Solicitation11/30/2026

Additional Details

Solicitation Number

HSFLGL-12-B-00003

Archive Date

Feb 19, 2014