GovChime
Notice ID: c36bcf76792445978c6a10804c062c0fSpecial Notice

AFRL/RFD Intent to Award Sole/Single Source - Keysight Calibration & Repair

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
November 5, 2026
Notice type
Special Notice
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE RESEARCH LABORATORY.FA2396 USAF AFMC AFRL PZL AFRL PZLE
Place of performance
Wright Patterson AFB, Ohio, 45433
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
IASS-AFRL-RMZB-2027-0003
Notice ID
c36bcf76792445978c6a10804c062c0f

Description

This requirement is for on-site calibration and repair services as well as calibration and repair services at the contractor’s facilities of Keysight manufactured test equipment in support of the Air Force Research Laboratory Sensors Directorate (AFRL/RF) at Wright-Patterson AFB, Ohio.

NOTICE OF INTENT TO AWARD SINGLE SOURCE: The NAICS Code is 811210 - Electronic and Precision Equipment Repair and Maintenance. The Air Force Research Laboratory (AFRL/RMZB), located at Wright-Patterson AFB, Ohio, intends to award a sole source purchase order as authorized by RFO 12.102(a) to Keysight Technologies, Inc. In order to comply with RFO 5.101(c)(4)(vii), the reason for lack of competition is as follows: Keysight Technologies, Inc. is the manufacturer of the equipment and is the recommended vendor authorized to calibrate and repair all equipment identified on the equipment list required for the services.  Please see attachment to this notice for additional details.

This Notice of Intent is NOT a request for competitive quotes or proposals. A determination by the Government for the competition of this requirement based upon responses to this notice is solely within the discretion of the Government. All responsible sources or authorized distributors may submit a capability statement that meets all the requirements in the attached Performance Work Statement (PWS), quotation or exception to the intent to purchase on a sole source basis, which shall be considered by the Government via e-mail to Mr. Jason B. Sav at jason.sav@us.af.mil no later than 19 November 2026 at 5:00pm Eastern Time.  Only responses received by this date will be considered. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement.

Be advised that all correspondence sent via e-mail shall contain a subject line that reads “Notice of Intent SS – Keysight Calibration and Repair Service Agreement”. Note that e-mail filters at Wright-Patterson AFB are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe, or .zip files).  Therefore, if this subject line is not included, the e-mail may not get through the e-mail filters.  Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the e-mail filters at Wright-Patterson AFB.  If sending attachments with e-mail, ensure only .PDF, .doc, docx, xls, or .xsls documents are sent.  The e-mail filter may delete any other form of attachments.

Attachment(s):

Performance Work Statement (PWS)                

Single Source Justification (SSJ) Redacted

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • Performance Work Statement (PWS).pdf

    285 KBAdded in Special Notice version 1Posted
    Download
  • SSJ_Redacted.pdf

    282 KBAdded in Special Notice version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Special NoticeCurrent

    AFRL/RFD Intent to Award Sole/Single Source - Keysight Calibration & Repair

    Notice c36bcf76792445978c6a10804c062c0f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
-AwardedOpen
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
This is a combined synopsis/solicitation notice for the procurement of Preventative Maintenance services for Arc Spark Optical Emissions Spectrometer. This is for one (1) Base year and four (4) Option years. FOB Destination is Tinker AFB OK.
-Combined Synopsis11/12/2026

Additional Details

Solicitation Number

IASS-AFRL-RMZB-2027-0003

Archive Date

Dec 4, 2026

Office Address

WRIGHT PATTERSON AFB, OH, 45433-7541