GovChime
Notice ID: 4c43b075003c8dae206e38e7cb4c5566Combined Synopsis/Solicitation

Cost-Per-Test terms and conditions for a Siemens Dimension EXL 200 Integrated Chemistry System or equivalent at IHS Parker Indian Medical Center, Parker, Arizona

Archived on June 17, 2017. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 PM UTC+02:00
Posted
May 23, 2017
Notice type
Combined Synopsis/Solicitation
NAICS
334516: Analytical Laboratory Instrument Manufacturing

Notice details

Place of performance
Parker Indian Health Center, Laboratory, 12033 Agency Road, , Parker, 85344
PSC
Q: MEDICAL SERVICES
Last updated
Dec 4, 2025

Identifiers

Solicitation number
IHS1321499
Notice ID
4c43b075003c8dae206e38e7cb4c5566

Description

This is a COMBINED SOLICITATION/SYNOPSIS for commercial items/service prepared in accordance with the format in FAR subpart 12.6 as supplemented with additional information included in this notice. This solicitation has been prepared with the intent to award a Firm Fixed Price (FFP) contract, utilizing procedures under FAR part 13. The proposed contract action is to provide service in accordance with Cost-Per-Test terms and conditions for a Siemens Dimension EXL 200 Integrated Chemistry System or equivalent. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The Request for Quotation (RFQ) number IHS1321499. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-88, 16 May 2016. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. The North American Industry Classification System (NAICS) Code for this acquisition is 334516; Size Standard is 1,000 employees. Please see attached SOW for requirement details.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Barbara Bonnette
Supervisory Contract Specialist

Documents

No documents available.

Lifecycle

Solicitation:IHS1321499
  1. Combined Synopsis
  1. Combined SynopsisCurrentMay 23, 2017

    Cost-Per-Test terms and conditions for a Siemens Dimension EXL 200 Integrated Chemistry System or equivalent at IHS Parker Indian Medical Center, Parker, Arizona

    Notice 4c43b075003c8dae206e38e7cb4c5566 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Department of Veterans Affairs (VA), Office of Acquisition NCO 22, is conducting market research to identify qualified businesses capable of providing one (1) MVE CryoCart, Manufacturer Part Number 14448703 for the Southern Arizona VA Health Care System (SAVAHCS) in Tucson, Arizona. The requirement is specifically for the MVE Biological Solutions CryoCart, Part Number 14448703. The purpose of this Sources Sought Notice is to determine the availability and capability of interested vendors, including Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), Veteran-Owned Small Businesses (VOSBs), and other small business concerns, to furnish the specified equipment. This notice is issued solely for market research and acquisition planning purposes and is not a solicitation or request for quotations.
-Market Research11/24/2026
This is a combined synopsis/solicitation for commercial supplies prepared in accordance with Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number 36C26225Q1470 is issued as a request for quote (RFQ) for scope system for endoscopic procedures. This acquisition is set-aside for Small Business concerns. This solicitation incorporates provisions and clauses and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. Model Number, Description, Quantity (ea) INS9900, HD Monitor, 16 INS9904, LED Scope, 1.9mm X 2M, 16 INS9902, HD Mini Scope, 1mm X 1M, 16 Salient Characteristics Must provide waterproofing borescope to be used at the sink. Must provide 1mm High Resolution Borescope. Must have a standalone touch monitor with a minimum of 13-inchs and provide 8.4-inch image of lumen being Inspected. Must have holsters to hold each Borescope in place on the monitor. Must be able to connect to the Pure Processing Ergonomic workstations with the Pure Processing Monitor mount. The monitors must be waterproof, as defined by the International Electro Technical Commission is IP65 and Borescopes are IP6. Must record, take pictures, and save to USB drive for documentation. Must have Automatic white balance - always in focus. Must have ergonomic one-plug borescope connector for easier handling. Must have annotation capabilities. Must have brightness adjustment for optimal imaging. The period of performance for this requirement is 90 days ARO. The Contractor shall furnish all supplies at The Greater Los Angeles VA Health Care System located at 11301 Wilshire Blvd, Los Angeles CA, 90073. Shipping included in cost. FOB is destination. NOTE: Potential offers must be aware that the items being acquired are procured as Brand Name or Equal. For those items that are “or equal”. The FAR Clause 52.211-6 Brand Name or Equal applies to this acquisition. Any items quoted as equal not conforming to the requirements of clause 52.211-6 will be considered non-responsive and not considered for award. The North American Industrial Classification System (NAICS) code for this requirement is 334516, Size Standard 1,000 Employees. The Contractor shall adhere to all federal and state laws and regulations in effect during the term of this contract. The Government intends to award a firm fixed price contract. Due to time constraints, responses to the solicitation shall be due on Thursday, September 17, 2026, at 12:00 PM PT Local Time. Offerors are advised that it is your responsibility to review and monitor the website frequently to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to Jasmine Pressley-Barnard, Contracting Officer at jasmine.pressley-barnard@va.gov with "36C26226Q1470, SCOPE SYSTEM” in the subject line within 48 hours of release of this notice. Telephone inquiries will not be honored. Inquiries after the allotted period may not be responded to due to the time constraints of the procurement. All offerors must be registered in www.sam.gov to do business with the Government. Ensure your registration is correct, current and has not expired. 52.212-2 Evaluation -- Commercial Items (Oct 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all the requirements of this solicitation that is both responsive and responsible. Acceptability of equipment shall be established by review of each submitted quotation by the designated evaluator(s). (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following clauses also apply: Gray Market Items (a) Gray market items are Original Equipment Manufacturers (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts) for VA Medical Centers. No remanufactures or gray market items will be acceptable. (b) Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts), verified by an authorization letter or other documents from the OEM, such that the OEM’s warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the medical supplies, medical equipment and/or services contracts for maintenance of medical equipment shall be in accordance with the OEM terms and conditions. (c) The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right to enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA’s election, allowing the Vendor to replace, at no cost to the Government, any remanufactured or gray market item(s) delivered to a VA medical Facility upon discovery of such items. (End of clause) In addition, the following clauses shall also apply: 52.202-1 Definitions Jun 2020 52.203-3 Gratuities Apr 1984 52.203-5 Covenant Against Contingent Frees May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government Jun 2020 52.203-8 Cancellation, Rescission and Recovery of Funds for Illegal or Improper Activity May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity May 2014 52.203-16 Preventing Personal Conflicts of Interest Jun 2020 52.203-17 Contractor Employee Whistleblower Rights Nov 2023 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements Jan 2017 52.204-13 System for Award Management Maintenance Oct 2018 52.204-19 Incorporation by Reference of Representations and Certifications Dec 2014 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded Jan 2025 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters Oct 2018 Deviation Nov 2025 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations Nov 2015 Deviation Nov 2025 52.219-8 Utilization of Small Business Concerns Jan 2025 Deviation Nov 2025 52.222-1 Notice to the Government of Labor Disputes Feb 1997 52.222-35 Equal Opportunity for Veterans Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities Jun 2020 52.222-37 Employment Reports on Veterans Jun 2020 52.222-40 Notification of Employee Rights Under the National Labor Relations Act Dec 2010 52.222-50 Combating Trafficking in Persons Nov 2021 52.223-23 Sustainable Products May 2024 Deviation Nov 2025 52.226-7 Drug-Free Workplace May 2024 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving May 2024 52.229-4 Federal, State and Local Taxes Feb 2013 Deviation Sep 2025 52.232-17 Interest May 2014 52.232-33 Payment by Electronic Funds Transfer – System for Award Management Jul 2013 52.232-39 Unenforceability of Unauthorized Obligations Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors Dec 2013 52.233-1 Disputes May 2014 52.233-3 Protest After Award Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) 52.242-13 Bankruptcy Jul 1995 52.242-14 Suspension of Work Apr 1984 52.244-2 Subcontracts Jun 2020 852.203-70 Commercial advertising Jan 2008 852.232-72 Electronic submission of payment requests Nov 2012 852.237-70 Contractor responsibilities Apr 1984 The full text of a clause may be accessed electronically at the following: http://www.acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp The following provisions shall also apply: 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Transactions Sep 2024 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation Jan 2017 52.204-7 System for Award Management Oct 2018 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) Aug 2024 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation Deviation Nov 2025 52.209-5 Certification Regarding Responsibility Matters Deviation Nov 2025 52.209-7 Information Regarding Responsibility Matters Oct 2018 52.217-5 Evaluation of Options Jul 1990 852.233-70 Protest Content/Alternative Dispute Resolution Oct 2018 852.233-71 Alternate Protest Procedure Oct 2018
-Combined Synopsis09/18/2026
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 334510 Electromedical and Electrotherapeutic Apparatus Manufacturing. Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The purpose of this procurement is to acquire autonomous healthcare delivery robot system for interior use at the VA Long Beach Healthcare System Pharmacy (VALBHS). 1. Functional and Performance Requirements The system shall autonomously transport and deliver critical Pharmacy medical supplies, pharmacy orders, and similar healthcare items within interior areas of VA Long Beach without continuous human teleoperation during normal operation. The system shall employ self driving obstacle avoidance technology that uses at least two sensing modalities from among 3D vision, eye safe laser ranging, and sonar (or functionally equivalent technologies) to map and navigate the facility while avoiding people and obstacles in a dynamic hospital environment. The robot shall be capable of continuous transport operations at a nominal walking pace appropriate for safe operation among staff and patients (approximately 2 4 miles per hour), with the ability to adjust speed as needed to comply with VA safety policies. 2. Payload and Capacity The robot shall provide at least one lockable, top loading cargo compartment designed for interior healthcare use. The primary cargo compartment shall have a total internal volume of at least 41 liters (approximately 11 gallons). The cargo compartment shall support a minimum payload of 50 pounds of medical items (e.g., linens, infusion pumps, towels, pharmacy totes, blood products, specimen racks). The system shall include configurable or removable internal accessories (e.g., liners, trays, baskets, or equivalent) that allow safe carriage of a variety of healthcare items such as prescription medications, 24 hour urine bottles, IV bags, test tube racks, and food containers commonly used at VA Long Beach. 3. Physical Characteristics The mobile robot width shall not exceed approximately 20 inches, enabling safe passage through standard VA corridors, doorways, and elevators. The overall height of the robot shall be approximately 37 inches to maintain visibility and accessibility for staff in nurse stations and corridors. The system shall be constructed of sturdy, resilient, easy to clean materials suitable for VA clinical environments, with smooth exterior surfaces compatible with commonly used hospital grade disinfectants. 4. Power and Endurance The robot shall support at least 24 hours of operation in a typical healthcare duty cycle with intermittent charging (i.e., the robot automatically or manually docks to recharge between runs without being removed from service for a full working day). The system shall include a docking/charging station compatible with standard 110 volt AC power, with a footprint not exceeding approximately 18 inches wide by 8 inches high by 10 inches deep. 5. Navigation and Maneuverability The robot shall support multiple navigation modes, including point to point delivery and other facility defined behaviors (e.g., delivery, usher, mingle, or functionally equivalent modes) that support VA logistics and clinical workflows. The robot shall have an effective turning radius of 0 feet (i.e., shall be capable of point turns in place) to maneuver in tight spaces such as corridors, patient room entries, and pharmacy/laboratory areas. 6. Communications and User Interface The system shall communicate with facility infrastructure using secure wireless communication, including Wi Fi; support for wide area connectivity (e.g., LTE or equivalent) is desired or shall be offered if commercially available. The system shall allow VA staff to initiate, monitor, and manage deliveries through a user interface appropriate for clinical and logistics personnel with minimal training (e.g., on robot touchscreen, workstation client, or mobile application). The user interface shall provide clear, task oriented controls and shall avoid vague performance descriptors such as user friendly or fastest, consistent with sound salient characteristics practices. 7. Environment and Support The system shall be designed and configured for interior use in VA healthcare facilities, including inpatient wards, outpatient clinics, ancillary services, and associated clinical spaces. The contractor shall provide technical and maintenance support appropriate for 24/7/365 VA healthcare operations (e.g., remote support, troubleshooting assistance, and replacement or repair procedures), consistent with commercial practices for mission critical hospital equipment. 8. Trade Agreements Act and Domestic Preference The offered robot system (including docking station and integrated software) shall comply with applicable Trade Agreements Act (TAA) requirements and other domestic preference requirements referenced in the RFQ, as implemented in FAR Part 25 and applicable VA Acquisition Regulation (VAAR) clauses, as incorporated by the Contracting Officer. Offerors shall identify the country(ies) of origin of the end product(s) and shall certify compliance with TAA and applicable Buy American/domestic preference requirements in accordance with the solicitation s FAR/VAAR provisions and clauses. If an offered end product is not TAA compliant or domestic, the offeror shall clearly disclose this in its quotation so that the VA Contracting Officer can determine acceptability and apply any required price evaluation preferences or restrictions. 9. Competitive, Non Brand Name Basis These salient characteristics are expressed as minimums or approximate maximums (e.g., at least, not to exceed approximately ) to allow full and open competition; no specific brand name or model is required. Any commercial item that meets or exceeds all enumerated salient characteristics shall be considered technically acceptable, subject to the RFQ s evaluation criteria (e.g., price and past performance) and all other terms and conditions. Descriptive literature submitted with quotations shall clearly demonstrate how the quoted product meets or exceeds each salient characteristic; literature that merely reproduces marketing claims without quantifying key performance metrics may be deemed insufficient. If your company is interested in and capable of providing the required supplies/services, you MUST provide the information indicated below OR your intent, interest to participation, and information provided will not be considered as valid for research purposes. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please clearly show how your company meets/exceeds each requirement otherwise your response will be recorded as interest only . (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) Please indicate whether your product conforms to the requirements of the Buy American Act? Please indicate if manufacturer is/will be US domestic Small Business / US Domestic Large Business / Foreign. (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to sam.choo@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, November 13, 2026 by 10:00 AM PST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research11/13/2026
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 334510 Electromedical and Electrotherapeutic Apparatus Manufacturing. Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The purpose of this procurement is to acquire autonomous healthcare delivery robot system for interior use at the VA Long Beach Healthcare System Pharmacy (VALBHS). 1. Functional and Performance Requirements The system shall autonomously transport and deliver critical Pharmacy medical supplies, pharmacy orders, and similar healthcare items within interior areas of VA Long Beach without continuous human teleoperation during normal operation. The system shall employ self driving obstacle avoidance technology that uses at least two sensing modalities from among 3D vision, eye safe laser ranging, and sonar (or functionally equivalent technologies) to map and navigate the facility while avoiding people and obstacles in a dynamic hospital environment. The robot shall be capable of continuous transport operations at a nominal walking pace appropriate for safe operation among staff and patients (approximately 2 4 miles per hour), with the ability to adjust speed as needed to comply with VA safety policies. 2. Payload and Capacity The robot shall provide at least one lockable, top loading cargo compartment designed for interior healthcare use. The primary cargo compartment shall have a total internal volume of at least 41 liters (approximately 11 gallons). The cargo compartment shall support a minimum payload of 50 pounds of medical items (e.g., linens, infusion pumps, towels, pharmacy totes, blood products, specimen racks). The system shall include configurable or removable internal accessories (e.g., liners, trays, baskets, or equivalent) that allow safe carriage of a variety of healthcare items such as prescription medications, 24 hour urine bottles, IV bags, test tube racks, and food containers commonly used at VA Long Beach. 3. Physical Characteristics The mobile robot width shall not exceed approximately 20 inches, enabling safe passage through standard VA corridors, doorways, and elevators. The overall height of the robot shall be approximately 37 inches to maintain visibility and accessibility for staff in nurse stations and corridors. The system shall be constructed of sturdy, resilient, easy to clean materials suitable for VA clinical environments, with smooth exterior surfaces compatible with commonly used hospital grade disinfectants. 4. Power and Endurance The robot shall support at least 24 hours of operation in a typical healthcare duty cycle with intermittent charging (i.e., the robot automatically or manually docks to recharge between runs without being removed from service for a full working day). The system shall include a docking/charging station compatible with standard 110 volt AC power, with a footprint not exceeding approximately 18 inches wide by 8 inches high by 10 inches deep. 5. Navigation and Maneuverability The robot shall support multiple navigation modes, including point to point delivery and other facility defined behaviors (e.g., delivery, usher, mingle, or functionally equivalent modes) that support VA logistics and clinical workflows. The robot shall have an effective turning radius of 0 feet (i.e., shall be capable of point turns in place) to maneuver in tight spaces such as corridors, patient room entries, and pharmacy/laboratory areas. 6. Communications and User Interface The system shall communicate with facility infrastructure using secure wireless communication, including Wi Fi; support for wide area connectivity (e.g., LTE or equivalent) is desired or shall be offered if commercially available. The system shall allow VA staff to initiate, monitor, and manage deliveries through a user interface appropriate for clinical and logistics personnel with minimal training (e.g., on robot touchscreen, workstation client, or mobile application). The user interface shall provide clear, task oriented controls and shall avoid vague performance descriptors such as user friendly or fastest, consistent with sound salient characteristics practices. 7. Environment and Support The system shall be designed and configured for interior use in VA healthcare facilities, including inpatient wards, outpatient clinics, ancillary services, and associated clinical spaces. The contractor shall provide technical and maintenance support appropriate for 24/7/365 VA healthcare operations (e.g., remote support, troubleshooting assistance, and replacement or repair procedures), consistent with commercial practices for mission critical hospital equipment. 8. Trade Agreements Act and Domestic Preference The offered robot system (including docking station and integrated software) shall comply with applicable Trade Agreements Act (TAA) requirements and other domestic preference requirements referenced in the RFQ, as implemented in FAR Part 25 and applicable VA Acquisition Regulation (VAAR) clauses, as incorporated by the Contracting Officer. Offerors shall identify the country(ies) of origin of the end product(s) and shall certify compliance with TAA and applicable Buy American/domestic preference requirements in accordance with the solicitation s FAR/VAAR provisions and clauses. If an offered end product is not TAA compliant or domestic, the offeror shall clearly disclose this in its quotation so that the VA Contracting Officer can determine acceptability and apply any required price evaluation preferences or restrictions. 9. Competitive, Non Brand Name Basis These salient characteristics are expressed as minimums or approximate maximums (e.g., at least, not to exceed approximately ) to allow full and open competition; no specific brand name or model is required. Any commercial item that meets or exceeds all enumerated salient characteristics shall be considered technically acceptable, subject to the RFQ s evaluation criteria (e.g., price and past performance) and all other terms and conditions. Descriptive literature submitted with quotations shall clearly demonstrate how the quoted product meets or exceeds each salient characteristic; literature that merely reproduces marketing claims without quantifying key performance metrics may be deemed insufficient. If your company is interested in and capable of providing the required supplies/services, you MUST provide the information indicated below OR your intent, interest to participation, and information provided will not be considered as valid for research purposes. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please clearly show how your company meets/exceeds each requirement otherwise your response will be recorded as interest only . (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) Please indicate whether your product conforms to the requirements of the Buy American Act? Please indicate if manufacturer is/will be US domestic Small Business / US Domestic Large Business / Foreign. (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to sam.choo@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, November 13, 2026 by 10:00 AM PST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research11/13/2026
This is an Award Notice prepared in accordance with FAR 5.301. The Naval Air Warfare Center Aircraft Division (NAWCAD) awarded contract N00421-26-C-1025 that resulted from Solicitation N00421-26-R-1013 to Tiger Century Aircraft, Inc (TCA), Unit C, 101 Commercial Way, Tehachapi, CA 93561-1407 on 23 September 2026 in the amount of $2,732,543.83. N00421-26-C-1025 was awarded as a sole source to TCA under authority FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements. TCA will provide the development, qualification, manufacture, and delivery of DAS with a built-in OAT display unit which will prevent loss of aircraft due to out-of-control flight (OCF) and mitigate a known issue with F-5 Functional Check Flights (FCF), respectively. This effort was issued as a sole source to TCA under NAICS Code 334511 (Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing) which resulted in the placement of a contract with a two-year period of performance. The contract consists of Firm-Fixed-Price (FFP) CLINs for Production Kits, Production Spares, Simulators, and Technical Data. This synopsis is for informational purposes only.
-AwardedOpen

Additional Details

Solicitation Number

IHS1321499

Archive Date

Jun 17, 2017